dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: kernel@collabora.com, Tony Lindgren <tony@atomide.com>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Merlijn Wajer <merlijn@wizzup.org>,
	Sebastian Reichel <sebastian.reichel@collabora.com>,
	dri-devel@lists.freedesktop.org, linux-omap@vger.kernel.org
Subject: [RFCv1 34/42] drm/omap: dsi: implement check timings
Date: Sun, 17 Nov 2019 03:40:20 +0100	[thread overview]
Message-ID: <20191117024028.2233-35-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20191117024028.2233-1-sebastian.reichel@collabora.com>

Implement check timings, which will check if its possible to
configure the clocks for the provided mode using the same code
as the set_config() hook.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/gpu/drm/omapdrm/dss/dsi.c | 70 +++++++++++++++++++------------
 1 file changed, 44 insertions(+), 26 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
index 754815068927..1b57f516618a 100644
--- a/drivers/gpu/drm/omapdrm/dss/dsi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
@@ -283,6 +283,11 @@ struct dsi_isr_tables {
 	struct dsi_isr_data isr_table_cio[DSI_MAX_NR_ISRS];
 };
 
+struct dsi_lp_clock_info {
+	unsigned long lp_clk;
+	u16 lp_clk_div;
+};
+
 struct dsi_clk_calc_ctx {
 	struct dsi_data *dsi;
 	struct dss_pll *pll;
@@ -297,16 +302,12 @@ struct dsi_clk_calc_ctx {
 
 	struct dss_pll_clock_info dsi_cinfo;
 	struct dispc_clock_info dispc_cinfo;
+	struct dsi_lp_clock_info user_lp_cinfo;
 
 	struct videomode vm;
 	struct omap_dss_dsi_videomode_timings dsi_vm;
 };
 
-struct dsi_lp_clock_info {
-	unsigned long lp_clk;
-	u16 lp_clk_div;
-};
-
 struct dsi_module_id_data {
 	u32 address;
 	int id;
@@ -4794,44 +4795,55 @@ static bool dsi_is_video_mode(struct omap_dss_device *dssdev)
 	return (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE);
 }
 
-static int dsi_set_config(struct omap_dss_device *dssdev,
-		const struct drm_display_mode *mode)
+static int __dsi_calc_config(struct dsi_data *dsi,
+		const struct drm_display_mode *mode,
+		struct dsi_clk_calc_ctx *ctx)
 {
-	struct dsi_data *dsi = to_dsi_data(dssdev);
-	struct dsi_clk_calc_ctx ctx;
-	struct videomode vm;
 	struct omap_dss_dsi_config cfg = dsi->config;
+	struct videomode vm;
 	bool ok;
 	int r;
 
 	drm_display_mode_to_videomode(mode, &vm);
-	cfg.vm = &vm;
-
-	mutex_lock(&dsi->lock);
 
+	cfg.vm = &vm;
 	cfg.mode = dsi->mode;
 	cfg.pixel_format = dsi->pix_fmt;
 
 	if (dsi->mode == OMAP_DSS_DSI_VIDEO_MODE)
-		ok = dsi_vm_calc(dsi, &cfg, &ctx);
+		ok = dsi_vm_calc(dsi, &cfg, ctx);
 	else
-		ok = dsi_cm_calc(dsi, &cfg, &ctx);
+		ok = dsi_cm_calc(dsi, &cfg, ctx);
 
-	if (!ok) {
-		DSSERR("failed to find suitable DSI clock settings\n");
-		r = -EINVAL;
-		goto err;
-	}
+	if (!ok)
+		return -EINVAL;
+
+	dsi_pll_calc_dsi_fck(dsi, &ctx->dsi_cinfo);
 
-	dsi_pll_calc_dsi_fck(dsi, &ctx.dsi_cinfo);
+	r = dsi_lp_clock_calc(ctx->dsi_cinfo.clkout[HSDIV_DSI],
+		cfg.lp_clk_min, cfg.lp_clk_max, &ctx->user_lp_cinfo);
+	if (r)
+		return r;
+
+	return 0;
+}
 
-	r = dsi_lp_clock_calc(ctx.dsi_cinfo.clkout[HSDIV_DSI],
-		cfg.lp_clk_min, cfg.lp_clk_max, &dsi->user_lp_cinfo);
+static int dsi_set_config(struct omap_dss_device *dssdev,
+		const struct drm_display_mode *mode)
+{
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+	struct dsi_clk_calc_ctx ctx;
+	int r;
+
+	mutex_lock(&dsi->lock);
+
+	r = __dsi_calc_config(dsi, mode, &ctx);
 	if (r) {
-		DSSERR("failed to find suitable DSI LP clock settings\n");
+		DSSERR("failed to find suitable DSI clock settings\n");
 		goto err;
 	}
 
+	dsi->user_lp_cinfo = ctx.user_lp_cinfo;
 	dsi->user_dsi_cinfo = ctx.dsi_cinfo;
 	dsi->user_dispc_cinfo = ctx.dispc_cinfo;
 
@@ -5008,11 +5020,17 @@ static void dsi_set_timings(struct omap_dss_device *dssdev,
 static int dsi_check_timings(struct omap_dss_device *dssdev,
 			     struct drm_display_mode *mode)
 {
+	struct dsi_data *dsi = to_dsi_data(dssdev);
+	struct dsi_clk_calc_ctx ctx;
+	int r;
+
 	DSSDBG("dsi_check_timings\n");
 
-	/* TODO */
+	mutex_lock(&dsi->lock);
+	r = __dsi_calc_config(dsi, mode, &ctx);
+	mutex_unlock(&dsi->lock);
 
-	return 0;
+	return r;
 }
 
 static int dsi_connect(struct omap_dss_device *src,
-- 
2.24.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2019-11-17  2:41 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-17  2:39 [RFCv1 00/42] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Sebastian Reichel
2019-11-17  2:39 ` Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 01/42] omap/drm: drop unused dsi.configure_pins Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 02/42] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_* Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 03/42] drm/omap: constify write buffers Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 04/42] drm/omap: dsi: add generic transfer function Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 05/42] drm/omap: panel-dsi-cm: convert to transfer API Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 06/42] drm/omap: dsi: unexport specific data transfer functions Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 07/42] drm/omap: dsi: drop virtual channel logic Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 08/42] drm/omap: dsi: simplify write function Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 09/42] drm/omap: dsi: simplify read functions Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 10/42] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels Sebastian Reichel
2019-11-18 13:05   ` Tomi Valkeinen
2019-11-18 14:33     ` Sebastian Reichel
2019-11-18 14:37       ` H. Nikolaus Schaller
2019-11-18 15:03         ` Sebastian Reichel
2019-11-18 22:52           ` Tony Lindgren
2019-11-19 21:23             ` Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 12/42] drm/omap: dsi: introduce mipi_dsi_host Sebastian Reichel
2019-11-17  2:39 ` [RFCv1 13/42] drm/omap: panel-dsi-cm: use DSI helpers Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 14/42] drm/omap: dsi: request VC via mipi_dsi_attach Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 15/42] drm/omap: panel-dsi-cm: drop hardcoded VC Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 16/42] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 17/42] drm/omap: dsi: drop unused memory_read() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 18/42] drm/omap: dsi: drop unused get_te() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 19/42] drm/omap: dsi: drop unused enable_te() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 20/42] drm/omap: dsi: drop useless sync() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 21/42] drm/omap: dsi: use pixel-format and mode from attach Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 22/42] drm/omap: panel-dsi-cm: use bulk regulator API Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 23/42] drm/omap: dsi: lp/hs switching support for transfer() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 24/42] drm/omap: dsi: move TE GPIO handling into core Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 25/42] drm/omap: dsi: drop custom enable_te() API Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 26/42] drm/omap: dsi: do bus locking in host driver Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 27/42] drm/omap: dsi: untangle ulps ops from enable/disable Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 28/42] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 29/42] drm/omap: dsi: do ULPS in host driver Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 30/42] drm/omap: dsi: move panel refresh function to host Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 31/42] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 32/42] drm/omap: dsi: convert to drm_panel Sebastian Reichel
2019-11-17 19:23   ` H. Nikolaus Schaller
2019-11-18 14:45     ` Sebastian Reichel
2019-11-18 14:51       ` H. Nikolaus Schaller
2019-11-19  9:42         ` H. Nikolaus Schaller
2019-11-19 21:21           ` Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb Sebastian Reichel
2019-11-18 23:05   ` Tony Lindgren
2019-11-19  5:42     ` Tomi Valkeinen
2019-11-19 14:32       ` Tony Lindgren
2019-11-19 14:53         ` Tomi Valkeinen
2019-11-19 15:06           ` Tony Lindgren
2019-11-19 15:55             ` Tomi Valkeinen
2019-11-19 18:46               ` Andreas Kemnade
2019-11-19 21:15                 ` Sebastian Reichel
2019-11-20  3:48               ` Tony Lindgren
2019-11-17  2:40 ` Sebastian Reichel [this message]
2019-11-17  2:40 ` [RFCv1 35/42] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 36/42] drm/omap: panel-dsi-cm: support unbinding Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 37/42] drm/omap: panel-dsi-cm: fix remove() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 38/42] drm/omap: panel-dsi-cm: do not power on/off twice Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 39/42] drm/omap: dsi: return proper error code from dsi_update_all() Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 40/42] drm/omap: dsi: support panel un/re-binding Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 41/42] ARM: dts: omap4-droid4: add panel compatible Sebastian Reichel
2019-11-17  2:40 ` [RFCv1 42/42] drm/panel: Move OMAP's DSI command mode panel driver Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191117024028.2233-35-sebastian.reichel@collabora.com \
    --to=sebastian.reichel@collabora.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hns@goldelico.com \
    --cc=kernel@collabora.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=merlijn@wizzup.org \
    --cc=sre@kernel.org \
    --cc=tomi.valkeinen@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).