From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sre@kernel.org>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: kernel@collabora.com, Tony Lindgren <tony@atomide.com>,
"H. Nikolaus Schaller" <hns@goldelico.com>,
Merlijn Wajer <merlijn@wizzup.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
dri-devel@lists.freedesktop.org, linux-omap@vger.kernel.org
Subject: [RFCv1 00/42] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel
Date: Sun, 17 Nov 2019 03:39:46 +0100 [thread overview]
Message-ID: <20191117024028.2233-1-sebastian.reichel@collabora.com> (raw)
Message-ID: <20191117023946.VjCC3yE08DMx7JIKxNagPoT5et7WTnKGVV6MtOtB9Ro@z> (raw)
This updates the existing omapdrm DSI code, so that it uses
common drm_mipi_dsi API and drm_panel instead of custom API.
I did not implement support for drm_bridge, since I do not
own any hardware needing this and it does not seem to be a
supported scenario with the old DSS code.
The patchset has been tested with Droid 4 using Linux console,
X.org and Weston. While I found some issues, I could not find
any regressions compared to the current state (*). Combined with
Laurent's effort this will remove all custom panel/connector
drivers from omapdrm and allow more cleanups in the DSS code.
I pushed this patchset into the following branch:
https://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-n900.git/log/?h=omapdrm-dsi-drm-panel
(*) When display is used as console for dmesg one can see an
ugly deadlock on shutdown. I have not yet found the root
cause for this problem, but that already exists with
current mainline implementation.
-- Sebastian
Sebastian Reichel (42):
omap/drm: drop unused dsi.configure_pins
drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_*
drm/omap: constify write buffers
drm/omap: dsi: add generic transfer function
drm/omap: panel-dsi-cm: convert to transfer API
drm/omap: dsi: unexport specific data transfer functions
drm/omap: dsi: drop virtual channel logic
drm/omap: dsi: simplify write function
drm/omap: dsi: simplify read functions
drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg
ARM: dts: omap: add channel to DSI panels
drm/omap: dsi: introduce mipi_dsi_host
drm/omap: panel-dsi-cm: use DSI helpers
drm/omap: dsi: request VC via mipi_dsi_attach
drm/omap: panel-dsi-cm: drop hardcoded VC
drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines
drm/omap: dsi: drop unused memory_read()
drm/omap: dsi: drop unused get_te()
drm/omap: dsi: drop unused enable_te()
drm/omap: dsi: drop useless sync()
drm/omap: dsi: use pixel-format and mode from attach
drm/omap: panel-dsi-cm: use bulk regulator API
drm/omap: dsi: lp/hs switching support for transfer()
drm/omap: dsi: move TE GPIO handling into core
drm/omap: dsi: drop custom enable_te() API
drm/omap: dsi: do bus locking in host driver
drm/omap: dsi: untangle ulps ops from enable/disable
drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE
drm/omap: dsi: do ULPS in host driver
drm/omap: dsi: move panel refresh function to host
drm/omap: dsi: Reverse direction of the DSS device enable/disable
operations
drm/omap: dsi: convert to drm_panel
drm/omap: dsi: use atomic helper for dirtyfb
drm/omap: dsi: implement check timings
drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO
drm/omap: panel-dsi-cm: support unbinding
drm/omap: panel-dsi-cm: fix remove()
drm/omap: panel-dsi-cm: do not power on/off twice
drm/omap: dsi: return proper error code from dsi_update_all()
drm/omap: dsi: support panel un/re-binding
ARM: dts: omap4-droid4: add panel compatible
drm/panel: Move OMAP's DSI command mode panel driver
.../bindings/display/panel/panel-dsi-cm.txt | 4 +-
arch/arm/boot/dts/omap3-n950.dts | 3 +-
arch/arm/boot/dts/omap3.dtsi | 3 +
arch/arm/boot/dts/omap4-droid4-xt894.dts | 5 +-
arch/arm/boot/dts/omap4-sdp.dts | 6 +-
arch/arm/boot/dts/omap4.dtsi | 6 +
arch/arm/boot/dts/omap5.dtsi | 6 +
drivers/gpu/drm/omapdrm/displays/Kconfig | 6 -
drivers/gpu/drm/omapdrm/displays/Makefile | 1 -
.../gpu/drm/omapdrm/displays/panel-dsi-cm.c | 1387 -----------------
drivers/gpu/drm/omapdrm/dss/Kconfig | 1 +
drivers/gpu/drm/omapdrm/dss/base.c | 2 +-
drivers/gpu/drm/omapdrm/dss/dsi.c | 1019 ++++++++----
.../gpu/drm/omapdrm/dss/omapdss-boot-init.c | 1 -
drivers/gpu/drm/omapdrm/dss/omapdss.h | 81 +-
drivers/gpu/drm/omapdrm/omap_crtc.c | 37 +-
drivers/gpu/drm/omapdrm/omap_crtc.h | 1 -
drivers/gpu/drm/omapdrm/omap_encoder.c | 20 +-
drivers/gpu/drm/omapdrm/omap_fb.c | 21 +-
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-dsi-cm.c | 646 ++++++++
include/drm/drm_mipi_dsi.h | 2 +
23 files changed, 1385 insertions(+), 1883 deletions(-)
delete mode 100644 drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
create mode 100644 drivers/gpu/drm/panel/panel-dsi-cm.c
base-commit: 17cc51390c141662748dbbc2fe98f3ed10f2e13e
--
2.24.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-11-17 11:45 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-17 2:39 Sebastian Reichel [this message]
2019-11-17 2:39 ` [RFCv1 00/42] drm/omap: Convert DSI code to use drm_mipi_dsi and drm_panel Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 01/42] omap/drm: drop unused dsi.configure_pins Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 02/42] drm/omap: dsi: use MIPI_DSI_FMT_* instead of OMAP_DSS_DSI_FMT_* Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 03/42] drm/omap: constify write buffers Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 04/42] drm/omap: dsi: add generic transfer function Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 05/42] drm/omap: panel-dsi-cm: convert to transfer API Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 06/42] drm/omap: dsi: unexport specific data transfer functions Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 07/42] drm/omap: dsi: drop virtual channel logic Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 08/42] drm/omap: dsi: simplify write function Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 09/42] drm/omap: dsi: simplify read functions Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 10/42] drm/omap: dsi: switch dsi_vc_send_long/short to mipi_dsi_msg Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 11/42] ARM: dts: omap: add channel to DSI panels Sebastian Reichel
2019-11-18 13:05 ` Tomi Valkeinen
2019-11-18 14:33 ` Sebastian Reichel
2019-11-18 14:37 ` H. Nikolaus Schaller
2019-11-18 15:03 ` Sebastian Reichel
2019-11-18 22:52 ` Tony Lindgren
2019-11-19 21:23 ` Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 12/42] drm/omap: dsi: introduce mipi_dsi_host Sebastian Reichel
2019-11-17 2:39 ` [RFCv1 13/42] drm/omap: panel-dsi-cm: use DSI helpers Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 14/42] drm/omap: dsi: request VC via mipi_dsi_attach Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 15/42] drm/omap: panel-dsi-cm: drop hardcoded VC Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 16/42] drm/omap: panel-dsi-cm: use common MIPI DCS 1.3 defines Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 17/42] drm/omap: dsi: drop unused memory_read() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 18/42] drm/omap: dsi: drop unused get_te() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 19/42] drm/omap: dsi: drop unused enable_te() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 20/42] drm/omap: dsi: drop useless sync() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 21/42] drm/omap: dsi: use pixel-format and mode from attach Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 22/42] drm/omap: panel-dsi-cm: use bulk regulator API Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 23/42] drm/omap: dsi: lp/hs switching support for transfer() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 24/42] drm/omap: dsi: move TE GPIO handling into core Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 25/42] drm/omap: dsi: drop custom enable_te() API Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 26/42] drm/omap: dsi: do bus locking in host driver Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 27/42] drm/omap: dsi: untangle ulps ops from enable/disable Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 28/42] drm/dsi: add MIPI_DSI_MODE_ULPS_IDLE Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 29/42] drm/omap: dsi: do ULPS in host driver Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 30/42] drm/omap: dsi: move panel refresh function to host Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 31/42] drm/omap: dsi: Reverse direction of the DSS device enable/disable operations Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 32/42] drm/omap: dsi: convert to drm_panel Sebastian Reichel
2019-11-17 19:23 ` H. Nikolaus Schaller
2019-11-18 14:45 ` Sebastian Reichel
2019-11-18 14:51 ` H. Nikolaus Schaller
2019-11-19 9:42 ` H. Nikolaus Schaller
2019-11-19 21:21 ` Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 33/42] drm/omap: dsi: use atomic helper for dirtyfb Sebastian Reichel
2019-11-18 23:05 ` Tony Lindgren
2019-11-19 5:42 ` Tomi Valkeinen
2019-11-19 14:32 ` Tony Lindgren
2019-11-19 14:53 ` Tomi Valkeinen
2019-11-19 15:06 ` Tony Lindgren
2019-11-19 15:55 ` Tomi Valkeinen
2019-11-19 18:46 ` Andreas Kemnade
2019-11-19 21:15 ` Sebastian Reichel
2019-11-20 3:48 ` Tony Lindgren
2019-11-17 2:40 ` [RFCv1 34/42] drm/omap: dsi: implement check timings Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 35/42] drm/omap: panel-dsi-cm: use DEVICE_ATTR_RO Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 36/42] drm/omap: panel-dsi-cm: support unbinding Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 37/42] drm/omap: panel-dsi-cm: fix remove() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 38/42] drm/omap: panel-dsi-cm: do not power on/off twice Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 39/42] drm/omap: dsi: return proper error code from dsi_update_all() Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 40/42] drm/omap: dsi: support panel un/re-binding Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 41/42] ARM: dts: omap4-droid4: add panel compatible Sebastian Reichel
2019-11-17 2:40 ` [RFCv1 42/42] drm/panel: Move OMAP's DSI command mode panel driver Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191117024028.2233-1-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=hns@goldelico.com \
--cc=kernel@collabora.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-omap@vger.kernel.org \
--cc=merlijn@wizzup.org \
--cc=sre@kernel.org \
--cc=tomi.valkeinen@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).