* [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2)
@ 2020-01-05 15:51 Hans de Goede
2020-01-05 15:51 ` [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2) Hans de Goede
2020-01-10 11:43 ` [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Jani Nikula
0 siblings, 2 replies; 4+ messages in thread
From: Hans de Goede @ 2020-01-05 15:51 UTC (permalink / raw)
To: Jani Nikula, Joonas Lahtinen, Rodrigo Vivi
Cc: Hans de Goede, intel-gfx, Derek Basehore, dri-devel
From: Derek Basehore <dbasehore@chromium.org>
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Hans de Goede (changes in v2):
Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.
Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++-------
drivers/gpu/drm/i915/display/icl_dsi.c | 5 +-
drivers/gpu/drm/i915/display/intel_dp.c | 9 ++-
drivers/gpu/drm/i915/display/vlv_dsi.c | 5 +-
include/drm/drm_connector.h | 9 ++-
5 files changed, 71 insertions(+), 31 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index 2166000ed057..de5031c4aa49 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1139,7 +1139,8 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
* coordinates, so if userspace rotates the picture to adjust for
* the orientation it must also apply the same transformation to the
* touchscreen input coordinates. This property is initialized by calling
- * drm_connector_init_panel_orientation_property().
+ * drm_connector_set_panel_orientation() or
+ * drm_connector_set_panel_orientation_with_quirk()
*
* scaling mode:
* This property defines how a non-native mode is upscaled to the native
@@ -2046,38 +2047,41 @@ void drm_connector_set_vrr_capable_property(
EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
/**
- * drm_connector_init_panel_orientation_property -
- * initialize the connecters panel_orientation property
- * @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
+ * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
+ * @connector: connector for which to set the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ *
+ * This function sets the connector's panel_orientation and attaches
+ * a "panel orientation" property to the connector.
*
- * This function should only be called for built-in panels, after setting
- * connector->display_info.panel_orientation first (if known).
+ * Calling this function on a connector where the panel_orientation has
+ * already been set is a no-op (e.g. the orientation has been overridden with
+ * a kernel commandline option).
*
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * It is allowed to call this function with a panel_orientation of
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
*
* Returns:
* Zero on success, negative errno on failure.
*/
-int drm_connector_init_panel_orientation_property(
- struct drm_connector *connector, int width, int height)
+int drm_connector_set_panel_orientation(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation)
{
struct drm_device *dev = connector->dev;
struct drm_display_info *info = &connector->display_info;
struct drm_property *prop;
- int orientation_quirk;
- orientation_quirk = drm_get_panel_orientation_quirk(width, height);
- if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
- info->panel_orientation = orientation_quirk;
+ /* Already set? */
+ if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ return 0;
- if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ /* Don't attach the property if the orientation is unknown */
+ if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
return 0;
+ info->panel_orientation = panel_orientation;
+
prop = dev->mode_config.panel_orientation_property;
if (!prop) {
prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
@@ -2094,7 +2098,37 @@ int drm_connector_init_panel_orientation_property(
info->panel_orientation);
return 0;
}
-EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+EXPORT_SYMBOL(drm_connector_set_panel_orientation);
+
+/**
+ * drm_connector_set_panel_orientation_with_quirk -
+ * set the connecter's panel_orientation after checking for quirks
+ * @connector: connector for which to init the panel-orientation property.
+ * @panel_orientation: drm_panel_orientation value to set
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * Like drm_connector_set_panel_orientation(), but with a check for platform
+ * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_set_panel_orientation_with_quirk(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation,
+ int width, int height)
+{
+ int orientation_quirk;
+
+ orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+ if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ panel_orientation = orientation_quirk;
+
+ return drm_connector_set_panel_orientation(connector,
+ panel_orientation);
+}
+EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
int drm_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 325df29b0447..340a77eb62b0 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
- connector->base.display_info.panel_orientation =
- intel_dsi_get_panel_orientation(connector);
- drm_connector_init_panel_orientation_property(&connector->base,
+ drm_connector_set_panel_orientation_with_quirk(&connector->base,
+ intel_dsi_get_panel_orientation(connector),
connector->panel.fixed_mode->hdisplay,
connector->panel.fixed_mode->vdisplay);
}
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index b05b2191b919..5237a5615915 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7350,9 +7350,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_connector->panel.backlight.power = intel_edp_backlight_power;
intel_panel_setup_backlight(connector, pipe);
- if (fixed_mode)
- drm_connector_init_panel_orientation_property(
- connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+ if (fixed_mode) {
+ /* We do not know the orientation, but their might be a quirk */
+ drm_connector_set_panel_orientation_with_quirk(connector,
+ DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
+ fixed_mode->hdisplay, fixed_mode->vdisplay);
+ }
return true;
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index f35fd6609457..de5deced2548 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1622,10 +1622,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
- connector->base.display_info.panel_orientation =
- vlv_dsi_get_panel_orientation(connector);
- drm_connector_init_panel_orientation_property(
+ drm_connector_set_panel_orientation_with_quirk(
&connector->base,
+ vlv_dsi_get_panel_orientation(connector),
connector->panel.fixed_mode->hdisplay,
connector->panel.fixed_mode->vdisplay);
}
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 3b65badd1efd..43aa193395b5 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1552,8 +1552,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
uint64_t link_status);
void drm_connector_set_vrr_capable_property(
struct drm_connector *connector, bool capable);
-int drm_connector_init_panel_orientation_property(
- struct drm_connector *connector, int width, int height);
+int drm_connector_set_panel_orientation(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation);
+int drm_connector_set_panel_orientation_with_quirk(
+ struct drm_connector *connector,
+ enum drm_panel_orientation panel_orientation,
+ int width, int height);
int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
int min, int max);
--
2.24.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2)
2020-01-05 15:51 [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Hans de Goede
@ 2020-01-05 15:51 ` Hans de Goede
2020-01-06 17:23 ` [Intel-gfx] " Rodrigo Vivi
2020-01-10 11:43 ` [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Jani Nikula
1 sibling, 1 reply; 4+ messages in thread
From: Hans de Goede @ 2020-01-05 15:51 UTC (permalink / raw)
To: Jani Nikula, Joonas Lahtinen, Rodrigo Vivi
Cc: Hans de Goede, intel-gfx, dri-devel
If the new video=... panel_orientation option is set for a connector, honor
it and setup a matching "panel orientation" property on the connector.
Changes in v2:
-Improve DRM_INFO message to make it clear that the panel_orientation is
being forced from the commandline
BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/gpu/drm/drm_connector.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index de5031c4aa49..f632ca05960e 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -140,6 +140,13 @@ static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
connector->force = mode->force;
}
+ if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) {
+ DRM_INFO("cmdline forces connector %s panel_orientation to %d\n",
+ connector->name, mode->panel_orientation);
+ drm_connector_set_panel_orientation(connector,
+ mode->panel_orientation);
+ }
+
DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
connector->name, mode->name,
mode->xres, mode->yres,
--
2.24.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Intel-gfx] [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2)
2020-01-05 15:51 ` [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2) Hans de Goede
@ 2020-01-06 17:23 ` Rodrigo Vivi
0 siblings, 0 replies; 4+ messages in thread
From: Rodrigo Vivi @ 2020-01-06 17:23 UTC (permalink / raw)
To: Hans de Goede; +Cc: dri-devel, intel-gfx
On Sun, Jan 05, 2020 at 04:51:20PM +0100, Hans de Goede wrote:
> If the new video=... panel_orientation option is set for a connector, honor
> it and setup a matching "panel orientation" property on the connector.
>
> Changes in v2:
> -Improve DRM_INFO message to make it clear that the panel_orientation is
> being forced from the commandline
Thanks
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
>
> BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
> Acked-by: Maxime Ripard <mripard@kernel.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/gpu/drm/drm_connector.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index de5031c4aa49..f632ca05960e 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -140,6 +140,13 @@ static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
> connector->force = mode->force;
> }
>
> + if (mode->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN) {
> + DRM_INFO("cmdline forces connector %s panel_orientation to %d\n",
> + connector->name, mode->panel_orientation);
> + drm_connector_set_panel_orientation(connector,
> + mode->panel_orientation);
> + }
> +
> DRM_DEBUG_KMS("cmdline mode for connector %s %s %dx%d@%dHz%s%s%s\n",
> connector->name, mode->name,
> mode->xres, mode->yres,
> --
> 2.24.1
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2)
2020-01-05 15:51 [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Hans de Goede
2020-01-05 15:51 ` [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2) Hans de Goede
@ 2020-01-10 11:43 ` Jani Nikula
1 sibling, 0 replies; 4+ messages in thread
From: Jani Nikula @ 2020-01-10 11:43 UTC (permalink / raw)
To: Hans de Goede, Joonas Lahtinen, Rodrigo Vivi
Cc: Hans de Goede, intel-gfx, Derek Basehore, dri-devel
On Sun, 05 Jan 2020, Hans de Goede <hdegoede@redhat.com> wrote:
> From: Derek Basehore <dbasehore@chromium.org>
>
> Not every platform needs quirk detection for panel orientation, so
> split the drm_connector_init_panel_orientation_property into two
> functions. One for platforms without the need for quirks, and the
> other for platforms that need quirks.
>
> Hans de Goede (changes in v2):
>
> Rename the function from drm_connector_init_panel_orientation_property
> to drm_connector_set_panel_orientation[_with_quirk] and pass in the
> panel-orientation to set.
>
> Beside the rename, also make the function set the passed in value
> only once, if the value was set before (to a value other then
> DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.
>
> This change is preparation for allowing the user to override the
> panel-orientation for any connector from the kernel commandline.
> When the panel-orientation is overridden this way, then we must ignore
> the panel-orientation detection done by the driver.
Acked-by: Jani Nikula <jani.nikula@intel.com>
for merging via drm-misc.
---
Side note, I'm a bit concerned about the gradual accumulation of ad hoc
ways to set various connector properties on the kernel
command-line... without actually making it a generic way to set any
arbitrary connector properties on the kernel command-line.
BR,
Jani.
>
> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: Derek Basehore <dbasehore@chromium.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/gpu/drm/drm_connector.c | 74 ++++++++++++++++++-------
> drivers/gpu/drm/i915/display/icl_dsi.c | 5 +-
> drivers/gpu/drm/i915/display/intel_dp.c | 9 ++-
> drivers/gpu/drm/i915/display/vlv_dsi.c | 5 +-
> include/drm/drm_connector.h | 9 ++-
> 5 files changed, 71 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
> index 2166000ed057..de5031c4aa49 100644
> --- a/drivers/gpu/drm/drm_connector.c
> +++ b/drivers/gpu/drm/drm_connector.c
> @@ -1139,7 +1139,8 @@ static const struct drm_prop_enum_list dp_colorspaces[] = {
> * coordinates, so if userspace rotates the picture to adjust for
> * the orientation it must also apply the same transformation to the
> * touchscreen input coordinates. This property is initialized by calling
> - * drm_connector_init_panel_orientation_property().
> + * drm_connector_set_panel_orientation() or
> + * drm_connector_set_panel_orientation_with_quirk()
> *
> * scaling mode:
> * This property defines how a non-native mode is upscaled to the native
> @@ -2046,38 +2047,41 @@ void drm_connector_set_vrr_capable_property(
> EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
>
> /**
> - * drm_connector_init_panel_orientation_property -
> - * initialize the connecters panel_orientation property
> - * @connector: connector for which to init the panel-orientation property.
> - * @width: width in pixels of the panel, used for panel quirk detection
> - * @height: height in pixels of the panel, used for panel quirk detection
> + * drm_connector_set_panel_orientation - sets the connecter's panel_orientation
> + * @connector: connector for which to set the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + *
> + * This function sets the connector's panel_orientation and attaches
> + * a "panel orientation" property to the connector.
> *
> - * This function should only be called for built-in panels, after setting
> - * connector->display_info.panel_orientation first (if known).
> + * Calling this function on a connector where the panel_orientation has
> + * already been set is a no-op (e.g. the orientation has been overridden with
> + * a kernel commandline option).
> *
> - * This function will check for platform specific (e.g. DMI based) quirks
> - * overriding display_info.panel_orientation first, then if panel_orientation
> - * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
> - * "panel orientation" property to the connector.
> + * It is allowed to call this function with a panel_orientation of
> + * DRM_MODE_PANEL_ORIENTATION_UNKNOWN, in which case it is a no-op.
> *
> * Returns:
> * Zero on success, negative errno on failure.
> */
> -int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height)
> +int drm_connector_set_panel_orientation(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation)
> {
> struct drm_device *dev = connector->dev;
> struct drm_display_info *info = &connector->display_info;
> struct drm_property *prop;
> - int orientation_quirk;
>
> - orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> - if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> - info->panel_orientation = orientation_quirk;
> + /* Already set? */
> + if (info->panel_orientation != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + return 0;
>
> - if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + /* Don't attach the property if the orientation is unknown */
> + if (panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> return 0;
>
> + info->panel_orientation = panel_orientation;
> +
> prop = dev->mode_config.panel_orientation_property;
> if (!prop) {
> prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
> @@ -2094,7 +2098,37 @@ int drm_connector_init_panel_orientation_property(
> info->panel_orientation);
> return 0;
> }
> -EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation);
> +
> +/**
> + * drm_connector_set_panel_orientation_with_quirk -
> + * set the connecter's panel_orientation after checking for quirks
> + * @connector: connector for which to init the panel-orientation property.
> + * @panel_orientation: drm_panel_orientation value to set
> + * @width: width in pixels of the panel, used for panel quirk detection
> + * @height: height in pixels of the panel, used for panel quirk detection
> + *
> + * Like drm_connector_set_panel_orientation(), but with a check for platform
> + * specific (e.g. DMI based) quirks overriding the passed in panel_orientation.
> + *
> + * Returns:
> + * Zero on success, negative errno on failure.
> + */
> +int drm_connector_set_panel_orientation_with_quirk(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation,
> + int width, int height)
> +{
> + int orientation_quirk;
> +
> + orientation_quirk = drm_get_panel_orientation_quirk(width, height);
> + if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
> + panel_orientation = orientation_quirk;
> +
> + return drm_connector_set_panel_orientation(connector,
> + panel_orientation);
> +}
> +EXPORT_SYMBOL(drm_connector_set_panel_orientation_with_quirk);
>
> int drm_connector_set_obj_prop(struct drm_mode_object *obj,
> struct drm_property *property,
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 325df29b0447..340a77eb62b0 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -1536,9 +1536,8 @@ static void icl_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> - connector->base.display_info.panel_orientation =
> - intel_dsi_get_panel_orientation(connector);
> - drm_connector_init_panel_orientation_property(&connector->base,
> + drm_connector_set_panel_orientation_with_quirk(&connector->base,
> + intel_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> connector->panel.fixed_mode->vdisplay);
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index b05b2191b919..5237a5615915 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -7350,9 +7350,12 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> intel_connector->panel.backlight.power = intel_edp_backlight_power;
> intel_panel_setup_backlight(connector, pipe);
>
> - if (fixed_mode)
> - drm_connector_init_panel_orientation_property(
> - connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
> + if (fixed_mode) {
> + /* We do not know the orientation, but their might be a quirk */
> + drm_connector_set_panel_orientation_with_quirk(connector,
> + DRM_MODE_PANEL_ORIENTATION_UNKNOWN,
> + fixed_mode->hdisplay, fixed_mode->vdisplay);
> + }
>
> return true;
>
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index f35fd6609457..de5deced2548 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1622,10 +1622,9 @@ static void vlv_dsi_add_properties(struct intel_connector *connector)
>
> connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT;
>
> - connector->base.display_info.panel_orientation =
> - vlv_dsi_get_panel_orientation(connector);
> - drm_connector_init_panel_orientation_property(
> + drm_connector_set_panel_orientation_with_quirk(
> &connector->base,
> + vlv_dsi_get_panel_orientation(connector),
> connector->panel.fixed_mode->hdisplay,
> connector->panel.fixed_mode->vdisplay);
> }
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 3b65badd1efd..43aa193395b5 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -1552,8 +1552,13 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
> uint64_t link_status);
> void drm_connector_set_vrr_capable_property(
> struct drm_connector *connector, bool capable);
> -int drm_connector_init_panel_orientation_property(
> - struct drm_connector *connector, int width, int height);
> +int drm_connector_set_panel_orientation(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation);
> +int drm_connector_set_panel_orientation_with_quirk(
> + struct drm_connector *connector,
> + enum drm_panel_orientation panel_orientation,
> + int width, int height);
> int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
> int min, int max);
--
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-01-10 11:43 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-05 15:51 [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Hans de Goede
2020-01-05 15:51 ` [PATCH v2 2/2] drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2) Hans de Goede
2020-01-06 17:23 ` [Intel-gfx] " Rodrigo Vivi
2020-01-10 11:43 ` [PATCH v2 1/2] drm/connector: Split out orientation quirk detection (v2) Jani Nikula
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).