From: Bogdan Togorean <bogdan.togorean@analog.com>
To: <dri-devel@lists.freedesktop.org>
Cc: mark.rutland@arm.com, robdclark@chromium.org,
jernej.skrabec@siol.net, narmstrong@baylibre.com,
airlied@linux.ie, gregkh@linuxfoundation.org, jonas@kwiboo.se,
wsa+renesas@sang-engineering.com, linux-kernel@vger.kernel.org,
robh+dt@kernel.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
alexander.deucher@amd.com, tglx@linutronix.de, sam@ravnborg.org,
matt.redfearn@thinci.com,
Bogdan Togorean <bogdan.togorean@analog.com>
Subject: [RESEND v3 1/2] dt-bindings: drm: bridge: adv7511: Add ADV7535 support
Date: Tue, 7 Jan 2020 15:34:32 +0200 [thread overview]
Message-ID: <20200107133431.5201-2-bogdan.togorean@analog.com> (raw)
In-Reply-To: <20200107133431.5201-1-bogdan.togorean@analog.com>
ADV7535 is a part compatible with ADV7533 but it supports 1080p@60hz and
v1p2 supply is fixed to 1.8V
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
.../bindings/display/bridge/adi,adv7511.txt | 23 ++++++++++---------
1 file changed, 12 insertions(+), 11 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
index 2c887536258c..e8ddec5d9d91 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt
@@ -1,10 +1,10 @@
-Analog Device ADV7511(W)/13/33 HDMI Encoders
+Analog Device ADV7511(W)/13/33/35 HDMI Encoders
-----------------------------------------
-The ADV7511, ADV7511W, ADV7513 and ADV7533 are HDMI audio and video transmitters
-compatible with HDMI 1.4 and DVI 1.0. They support color space conversion,
-S/PDIF, CEC and HDCP. ADV7533 supports the DSI interface for input pixels, while
-the others support RGB interface.
+The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
+transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space
+conversion, S/PDIF, CEC and HDCP. ADV7533/5 supports the DSI interface for input
+pixels, while the others support RGB interface.
Required properties:
@@ -13,6 +13,7 @@ Required properties:
"adi,adv7511w"
"adi,adv7513"
"adi,adv7533"
+ "adi,adv7535"
- reg: I2C slave addresses
The ADV7511 internal registers are split into four pages exposed through
@@ -52,14 +53,14 @@ The following input format properties are required except in "rgb 1x" and
- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is
needed only for ADV7511.
-The following properties are required for ADV7533:
+The following properties are required for ADV7533 and ADV7535:
- adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should
be one of 1, 2, 3 or 4.
- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip.
- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip.
- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be
- either 1.2V or 1.8V.
+ either 1.2V or 1.8V for ADV7533 but only 1.8V for ADV7535.
Optional properties:
@@ -71,9 +72,9 @@ Optional properties:
- adi,embedded-sync: The input uses synchronization signals embedded in the
data stream (similar to BT.656). Defaults to separate H/V synchronization
signals.
-- adi,disable-timing-generator: Only for ADV7533. Disables the internal timing
- generator. The chip will rely on the sync signals in the DSI data lanes,
- rather than generate its own timings for HDMI output.
+- adi,disable-timing-generator: Only for ADV7533 and ADV7535. Disables the
+ internal timing generator. The chip will rely on the sync signals in the
+ DSI data lanes, rather than generate its own timings for HDMI output.
- clocks: from common clock binding: reference to the CEC clock.
- clock-names: from common clock binding: must be "cec".
- reg-names : Names of maps with programmable addresses.
@@ -85,7 +86,7 @@ Required nodes:
The ADV7511 has two video ports. Their connections are modelled using the OF
graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533, the
+- Video port 0 for the RGB, YUV or DSI input. In the case of ADV7533/5, the
remote endpoint phandle should be a reference to a valid mipi_dsi_host device
node.
- Video port 1 for the HDMI output
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-01-08 8:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 13:34 [RESEND v3 0/2] drm: bridge: adv7511: Add support For ADV7535 Bogdan Togorean
2020-01-07 13:34 ` Bogdan Togorean [this message]
2020-01-07 13:34 ` [RESEND v3 2/2] drm: bridge: adv7511: Add support for ADV7535 Bogdan Togorean
2020-01-17 10:27 ` Andrzej Hajda
2020-01-17 10:55 ` Andrzej Hajda
2020-01-17 12:51 ` Togorean, Bogdan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200107133431.5201-2-bogdan.togorean@analog.com \
--to=bogdan.togorean@analog.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matt.redfearn@thinci.com \
--cc=narmstrong@baylibre.com \
--cc=robdclark@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=tglx@linutronix.de \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).