From: Bogdan Togorean <bogdan.togorean@analog.com>
To: <dri-devel@lists.freedesktop.org>
Cc: mark.rutland@arm.com, robdclark@chromium.org,
jernej.skrabec@siol.net, narmstrong@baylibre.com,
airlied@linux.ie, gregkh@linuxfoundation.org, jonas@kwiboo.se,
wsa+renesas@sang-engineering.com, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, Laurent.pinchart@ideasonboard.com,
alexander.deucher@amd.com, tglx@linutronix.de, sam@ravnborg.org,
matt.redfearn@thinci.com,
Bogdan Togorean <bogdan.togorean@analog.com>
Subject: [RESEND v3 2/2] drm: bridge: adv7511: Add support for ADV7535
Date: Tue, 7 Jan 2020 15:34:34 +0200 [thread overview]
Message-ID: <20200107133431.5201-3-bogdan.togorean@analog.com> (raw)
In-Reply-To: <20200107133431.5201-1-bogdan.togorean@analog.com>
ADV7535 is a DSI to HDMI bridge chip like ADV7533 but it allows
1080p@60Hz. v1p2 is fixed to 1.8V on ADV7535 but on ADV7533 can be 1.2V
or 1.8V and is configurable in a register.
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
---
drivers/gpu/drm/bridge/adv7511/Kconfig | 13 ++----
drivers/gpu/drm/bridge/adv7511/Makefile | 3 +-
drivers/gpu/drm/bridge/adv7511/adv7511.h | 44 +++-----------------
drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 35 ++++++++++------
4 files changed, 32 insertions(+), 63 deletions(-)
diff --git a/drivers/gpu/drm/bridge/adv7511/Kconfig b/drivers/gpu/drm/bridge/adv7511/Kconfig
index 8a56ff81f4fb..47d4eb9e845d 100644
--- a/drivers/gpu/drm/bridge/adv7511/Kconfig
+++ b/drivers/gpu/drm/bridge/adv7511/Kconfig
@@ -4,8 +4,9 @@ config DRM_I2C_ADV7511
depends on OF
select DRM_KMS_HELPER
select REGMAP_I2C
+ select DRM_MIPI_DSI
help
- Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+ Support for the Analog Device ADV7511(W)/13/33/35 HDMI encoders.
config DRM_I2C_ADV7511_AUDIO
bool "ADV7511 HDMI Audio driver"
@@ -15,16 +16,8 @@ config DRM_I2C_ADV7511_AUDIO
Support the ADV7511 HDMI Audio interface. This is used in
conjunction with the AV7511 HDMI driver.
-config DRM_I2C_ADV7533
- bool "ADV7533 encoder"
- depends on DRM_I2C_ADV7511
- select DRM_MIPI_DSI
- default y
- help
- Support for the Analog Devices ADV7533 DSI to HDMI encoder.
-
config DRM_I2C_ADV7511_CEC
- bool "ADV7511/33 HDMI CEC driver"
+ bool "ADV7511/33/35 HDMI CEC driver"
depends on DRM_I2C_ADV7511
select CEC_CORE
default y
diff --git a/drivers/gpu/drm/bridge/adv7511/Makefile b/drivers/gpu/drm/bridge/adv7511/Makefile
index b46ebeb35fd4..d8ceb534b51f 100644
--- a/drivers/gpu/drm/bridge/adv7511/Makefile
+++ b/drivers/gpu/drm/bridge/adv7511/Makefile
@@ -1,6 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
-adv7511-y := adv7511_drv.o
+adv7511-y := adv7511_drv.o adv7533.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_AUDIO) += adv7511_audio.o
adv7511-$(CONFIG_DRM_I2C_ADV7511_CEC) += adv7511_cec.o
-adv7511-$(CONFIG_DRM_I2C_ADV7533) += adv7533.o
obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h
index 52b2adfdc877..ed9cfd944098 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511.h
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h
@@ -220,6 +220,10 @@
#define ADV7533_REG_CEC_OFFSET 0x70
+#define ADV7533_REG_SUPPLY_SELECT 0xe4
+
+#define ADV7533_V1P2_ENABLE BIT(7)
+
enum adv7511_input_clock {
ADV7511_INPUT_CLOCK_1X,
ADV7511_INPUT_CLOCK_2X,
@@ -320,6 +324,7 @@ struct adv7511_video_config {
enum adv7511_type {
ADV7511,
ADV7533,
+ ADV7535,
};
#define ADV7511_MAX_ADDRS 3
@@ -393,7 +398,6 @@ static inline int adv7511_cec_init(struct device *dev, struct adv7511 *adv7511)
}
#endif
-#ifdef CONFIG_DRM_I2C_ADV7533
void adv7533_dsi_power_on(struct adv7511 *adv);
void adv7533_dsi_power_off(struct adv7511 *adv);
void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode);
@@ -402,44 +406,6 @@ int adv7533_patch_cec_registers(struct adv7511 *adv);
int adv7533_attach_dsi(struct adv7511 *adv);
void adv7533_detach_dsi(struct adv7511 *adv);
int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv);
-#else
-static inline void adv7533_dsi_power_on(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_dsi_power_off(struct adv7511 *adv)
-{
-}
-
-static inline void adv7533_mode_set(struct adv7511 *adv,
- const struct drm_display_mode *mode)
-{
-}
-
-static inline int adv7533_patch_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_patch_cec_registers(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline int adv7533_attach_dsi(struct adv7511 *adv)
-{
- return -ENODEV;
-}
-
-static inline void adv7533_detach_dsi(struct adv7511 *adv)
-{
-}
-
-static inline int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
-{
- return -ENODEV;
-}
-#endif
#ifdef CONFIG_DRM_I2C_ADV7511_AUDIO
int adv7511_audio_init(struct device *dev, struct adv7511 *adv7511);
diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 9e13e466e72c..35595472e771 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -367,7 +367,7 @@ static void adv7511_power_on(struct adv7511 *adv7511)
*/
regcache_sync(adv7511->regmap);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_on(adv7511);
adv7511->powered = true;
}
@@ -387,7 +387,7 @@ static void __adv7511_power_off(struct adv7511 *adv7511)
static void adv7511_power_off(struct adv7511 *adv7511)
{
__adv7511_power_off(adv7511);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_dsi_power_off(adv7511);
adv7511->powered = false;
}
@@ -761,7 +761,7 @@ static void adv7511_mode_set(struct adv7511 *adv7511,
regmap_update_bits(adv7511->regmap, 0x17,
0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_mode_set(adv7511, adj_mode);
drm_mode_copy(&adv7511->curr_mode, adj_mode);
@@ -874,7 +874,7 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
&adv7511_connector_helper_funcs);
drm_connector_attach_encoder(&adv->connector, bridge->encoder);
- if (adv->type == ADV7533)
+ if (adv->type == ADV7533 || adv->type == ADV7535)
ret = adv7533_attach_dsi(adv);
if (adv->i2c_main->irq)
@@ -903,6 +903,7 @@ static const char * const adv7511_supply_names[] = {
"dvdd-3v",
};
+/* The order of entries is important. If changed update hardcoded indices */
static const char * const adv7533_supply_names[] = {
"avdd",
"dvdd",
@@ -952,7 +953,7 @@ static bool adv7511_cec_register_volatile(struct device *dev, unsigned int reg)
struct i2c_client *i2c = to_i2c_client(dev);
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
reg -= ADV7533_REG_CEC_OFFSET;
switch (reg) {
@@ -994,7 +995,7 @@ static int adv7511_init_cec_regmap(struct adv7511 *adv)
goto err;
}
- if (adv->type == ADV7533) {
+ if (adv->type == ADV7533 || adv->type == ADV7535) {
ret = adv7533_patch_cec_registers(adv);
if (ret)
goto err;
@@ -1094,8 +1095,9 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
struct adv7511_link_config link_config;
struct adv7511 *adv7511;
struct device *dev = &i2c->dev;
+ struct regulator *reg_v1p2;
unsigned int val;
- int ret;
+ int ret, reg_v1p2_uV;
if (!dev->of_node)
return -EINVAL;
@@ -1163,6 +1165,17 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
if (ret)
goto uninit_regulators;
+ if (adv7511->type == ADV7533) {
+ reg_v1p2 = adv7511->supplies[5].consumer;
+ reg_v1p2_uV = regulator_get_voltage(reg_v1p2);
+
+ if (reg_v1p2_uV == 1200000) {
+ regmap_update_bits(adv7511->regmap,
+ ADV7533_REG_SUPPLY_SELECT, ADV7533_V1P2_ENABLE,
+ ADV7533_V1P2_ENABLE);
+ }
+ }
+
adv7511_packet_disable(adv7511, 0xffff);
adv7511->i2c_edid = i2c_new_ancillary_device(i2c, "edid",
@@ -1242,7 +1255,7 @@ static int adv7511_remove(struct i2c_client *i2c)
{
struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
- if (adv7511->type == ADV7533)
+ if (adv7511->type == ADV7533 || adv7511->type == ADV7535)
adv7533_detach_dsi(adv7511);
i2c_unregister_device(adv7511->i2c_cec);
if (adv7511->cec_clk)
@@ -1266,9 +1279,8 @@ static const struct i2c_device_id adv7511_i2c_ids[] = {
{ "adv7511", ADV7511 },
{ "adv7511w", ADV7511 },
{ "adv7513", ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ "adv7533", ADV7533 },
-#endif
+ { "adv7535", ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
@@ -1277,9 +1289,8 @@ static const struct of_device_id adv7511_of_ids[] = {
{ .compatible = "adi,adv7511", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7511w", .data = (void *)ADV7511 },
{ .compatible = "adi,adv7513", .data = (void *)ADV7511 },
-#ifdef CONFIG_DRM_I2C_ADV7533
{ .compatible = "adi,adv7533", .data = (void *)ADV7533 },
-#endif
+ { .compatible = "adi,adv7535", .data = (void *)ADV7535 },
{ }
};
MODULE_DEVICE_TABLE(of, adv7511_of_ids);
--
2.23.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-01-08 8:13 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 13:34 [RESEND v3 0/2] drm: bridge: adv7511: Add support For ADV7535 Bogdan Togorean
2020-01-07 13:34 ` [RESEND v3 1/2] dt-bindings: drm: bridge: adv7511: Add ADV7535 support Bogdan Togorean
2020-01-07 13:34 ` Bogdan Togorean [this message]
2020-01-17 10:27 ` [RESEND v3 2/2] drm: bridge: adv7511: Add support for ADV7535 Andrzej Hajda
2020-01-17 10:55 ` Andrzej Hajda
2020-01-17 12:51 ` Togorean, Bogdan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200107133431.5201-3-bogdan.togorean@analog.com \
--to=bogdan.togorean@analog.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gregkh@linuxfoundation.org \
--cc=jernej.skrabec@siol.net \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=matt.redfearn@thinci.com \
--cc=narmstrong@baylibre.com \
--cc=robdclark@chromium.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=tglx@linutronix.de \
--cc=wsa+renesas@sang-engineering.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).