[PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[Sasha Levin]

From: Steven Price <steven.price@arm.com>

[ Upstream commit 52282163dfa651849e905886845bcf6850dd83c2 ]

When modifying panfrost_devfreq_target() to support a device without a
regulator defined I missed the check on the error path. Let's add it.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190822093218.26014-1-steven.price@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panfrost/panfrost_devfreq.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 12ff77dacc95..c1eb8cfe6aeb 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -53,8 +53,10 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
 	if (err) {
 		dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
 			err);
-		regulator_set_voltage(pfdev->regulator, pfdev->devfreq.cur_volt,
-				      pfdev->devfreq.cur_volt);
+		if (pfdev->regulator)
+			regulator_set_voltage(pfdev->regulator,
+					      pfdev->devfreq.cur_volt,
+					      pfdev->devfreq.cur_volt);
 		return err;
 	}
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[Steven Price]

On Thu, Jan 16, 2020 at 04:39:37PM +0000, Sasha Levin wrote:
> From: Steven Price <steven.price@arm.com>
> 
> [ Upstream commit 52282163dfa651849e905886845bcf6850dd83c2 ]

This commit is effectively already in 5.4. Confusingly there were two
versions of this upstream:

52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
c90f30812a79 ("drm/panfrost: Add missing check for pfdev->regulator")

It got merged both through a -fixes branch and through the normal merge
window. The two copies caused a bad merge in mainline and this was
effectively reverted in commit 603e398a3db2 ("drm/panfrost: Remove NULL
check for regulator").

c90f30812a79 is included in v5.4 so should already be in any v5.4.y
release.

Steve

> 
> When modifying panfrost_devfreq_target() to support a device without a
> regulator defined I missed the check on the error path. Let's add it.
> 
> Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
> Fixes: e21dd290881b ("drm/panfrost: Enable devfreq to work without regulator")
> Signed-off-by: Steven Price <steven.price@arm.com>
> Signed-off-by: Rob Herring <robh@kernel.org>
> Link: https://patchwork.freedesktop.org/patch/msgid/20190822093218.26014-1-steven.price@arm.com
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/panfrost/panfrost_devfreq.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> index 12ff77dacc95..c1eb8cfe6aeb 100644
> --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
> @@ -53,8 +53,10 @@ static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
>  	if (err) {
>  		dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
>  			err);
> -		regulator_set_voltage(pfdev->regulator, pfdev->devfreq.cur_volt,
> -				      pfdev->devfreq.cur_volt);
> +		if (pfdev->regulator)
> +			regulator_set_voltage(pfdev->regulator,
> +					      pfdev->devfreq.cur_volt,
> +					      pfdev->devfreq.cur_volt);
>  		return err;
>  	}
>  
> -- 
> 2.20.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[Greg KH]

On Fri, Jan 17, 2020 at 04:12:27PM +0000, Steven Price wrote:
> On Thu, Jan 16, 2020 at 04:39:37PM +0000, Sasha Levin wrote:
> > From: Steven Price <steven.price@arm.com>
> > 
> > [ Upstream commit 52282163dfa651849e905886845bcf6850dd83c2 ]
> 
> This commit is effectively already in 5.4. Confusingly there were two
> versions of this upstream:
> 
> 52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
> c90f30812a79 ("drm/panfrost: Add missing check for pfdev->regulator")
> 
> It got merged both through a -fixes branch and through the normal merge
> window. The two copies caused a bad merge in mainline and this was
> effectively reverted in commit 603e398a3db2 ("drm/panfrost: Remove NULL
> check for regulator").
> 
> c90f30812a79 is included in v5.4 so should already be in any v5.4.y
> release.

Have I mentioned this month just how much I hate the way the DRM tree
handles stable patches like this?  This kind of fallout is a pain for
stable maintainers, I dred every time I see a drm patch tagged for
stable.

But we've been over this all before :(

greg k-h
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[Dan Carpenter]

On Fri, Jan 17, 2020 at 05:59:09PM +0100, Greg KH wrote:
> On Fri, Jan 17, 2020 at 04:12:27PM +0000, Steven Price wrote:
> > On Thu, Jan 16, 2020 at 04:39:37PM +0000, Sasha Levin wrote:
> > > From: Steven Price <steven.price@arm.com>
> > > 
> > > [ Upstream commit 52282163dfa651849e905886845bcf6850dd83c2 ]
> > 
> > This commit is effectively already in 5.4. Confusingly there were two
> > versions of this upstream:
> > 
> > 52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
> > c90f30812a79 ("drm/panfrost: Add missing check for pfdev->regulator")
> > 
> > It got merged both through a -fixes branch and through the normal merge
> > window. The two copies caused a bad merge in mainline and this was
> > effectively reverted in commit 603e398a3db2 ("drm/panfrost: Remove NULL
> > check for regulator").
> > 
> > c90f30812a79 is included in v5.4 so should already be in any v5.4.y
> > release.
> 
> Have I mentioned this month just how much I hate the way the DRM tree
> handles stable patches like this?  This kind of fallout is a pain for
> stable maintainers, I dred every time I see a drm patch tagged for
> stable.
> 
> But we've been over this all before :(

Another example is:

29cd13cfd762 ("drm/v3d: Fix memory leak in v3d_submit_cl_ioctl")
0d352a3a8a1f ("drm/v3d: don't leak bin job if v3d_job_init fails.")

Two fixes for a memory leak were merged so now it's a double free.  I
sent a patch on Jan 10 but no one responded.

regards,
dan carpenter

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 002/205] drm/panfrost: Add missing check for pfdev->regulator

[Greg KH]

On Sat, Jan 18, 2020 at 11:18:45AM +0300, Dan Carpenter wrote:
> On Fri, Jan 17, 2020 at 05:59:09PM +0100, Greg KH wrote:
> > On Fri, Jan 17, 2020 at 04:12:27PM +0000, Steven Price wrote:
> > > On Thu, Jan 16, 2020 at 04:39:37PM +0000, Sasha Levin wrote:
> > > > From: Steven Price <steven.price@arm.com>
> > > > 
> > > > [ Upstream commit 52282163dfa651849e905886845bcf6850dd83c2 ]
> > > 
> > > This commit is effectively already in 5.4. Confusingly there were two
> > > versions of this upstream:
> > > 
> > > 52282163dfa6 ("drm/panfrost: Add missing check for pfdev->regulator")
> > > c90f30812a79 ("drm/panfrost: Add missing check for pfdev->regulator")
> > > 
> > > It got merged both through a -fixes branch and through the normal merge
> > > window. The two copies caused a bad merge in mainline and this was
> > > effectively reverted in commit 603e398a3db2 ("drm/panfrost: Remove NULL
> > > check for regulator").
> > > 
> > > c90f30812a79 is included in v5.4 so should already be in any v5.4.y
> > > release.
> > 
> > Have I mentioned this month just how much I hate the way the DRM tree
> > handles stable patches like this?  This kind of fallout is a pain for
> > stable maintainers, I dred every time I see a drm patch tagged for
> > stable.
> > 
> > But we've been over this all before :(
> 
> Another example is:
> 
> 29cd13cfd762 ("drm/v3d: Fix memory leak in v3d_submit_cl_ioctl")
> 0d352a3a8a1f ("drm/v3d: don't leak bin job if v3d_job_init fails.")
> 
> Two fixes for a memory leak were merged so now it's a double free.  I
> sent a patch on Jan 10 but no one responded.

Have a link to the patch?  I can't seem to find it :(
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 003/205] drm/v3d: don't leak bin job if v3d_job_init fails.

[Sasha Levin]

From: Iago Toral Quiroga <itoral@igalia.com>

[ Upstream commit 0d352a3a8a1f26168d09f7073e61bb4b328e3bb9 ]

If the initialization of the job fails we need to kfree() it
before returning.

Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190916071125.5255-1-itoral@igalia.com
Fixes: a783a09ee76d ("drm/v3d: Refactor job management.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/v3d/v3d_gem.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
index 19c092d75266..6316bf3646af 100644
--- a/drivers/gpu/drm/v3d/v3d_gem.c
+++ b/drivers/gpu/drm/v3d/v3d_gem.c
@@ -565,6 +565,7 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
 		ret = v3d_job_init(v3d, file_priv, &bin->base,
 				   v3d_job_free, args->in_sync_bcl);
 		if (ret) {
+			kfree(bin);
 			v3d_job_put(&render->base);
 			kfree(bin);
 			return ret;
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 003/205] drm/v3d: don't leak bin job if v3d_job_init fails.

[Iago Toral]

Hi Sasha,


please notice that there were two separate patches that addressed the
same issue and applying both simultaneously leads to a double free
(which is what I see is happening with this patch: see the second call
to kfree(bin) right below the one added here). This issue was raised
previously here:

https://lists.freedesktop.org/archives/dri-devel/2019-October/241425.html

Iago

On Thu, 2020-01-16 at 11:39 -0500, Sasha Levin wrote:
> From: Iago Toral Quiroga <itoral@igalia.com>
> 
> [ Upstream commit 0d352a3a8a1f26168d09f7073e61bb4b328e3bb9 ]
> 
> If the initialization of the job fails we need to kfree() it
> before returning.
> 
> Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
> Signed-off-by: Eric Anholt <eric@anholt.net>
> Link: 
> https://patchwork.freedesktop.org/patch/msgid/20190916071125.5255-1-itoral@igalia.com
> Fixes: a783a09ee76d ("drm/v3d: Refactor job management.")
> Reviewed-by: Eric Anholt <eric@anholt.net>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/gpu/drm/v3d/v3d_gem.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/gpu/drm/v3d/v3d_gem.c
> b/drivers/gpu/drm/v3d/v3d_gem.c
> index 19c092d75266..6316bf3646af 100644
> --- a/drivers/gpu/drm/v3d/v3d_gem.c
> +++ b/drivers/gpu/drm/v3d/v3d_gem.c
> @@ -565,6 +565,7 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void
> *data,
>  		ret = v3d_job_init(v3d, file_priv, &bin->base,
>  				   v3d_job_free, args->in_sync_bcl);
>  		if (ret) {
> +			kfree(bin);
>  			v3d_job_put(&render->base);
>  			kfree(bin);
>  			return ret;

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 003/205] drm/v3d: don't leak bin job if v3d_job_init fails.

[Sasha Levin]

On Fri, Jan 17, 2020 at 08:25:30AM +0100, Iago Toral wrote:
>Hi Sasha,
>
>
>please notice that there were two separate patches that addressed the
>same issue and applying both simultaneously leads to a double free
>(which is what I see is happening with this patch: see the second call
>to kfree(bin) right below the one added here). This issue was raised
>previously here:
>
>https://lists.freedesktop.org/archives/dri-devel/2019-October/241425.html

I'll drop this patch for now. Any idea why upstream didn't pick up the
fix yet? I see the problem still exists there.

-- 
Thanks,
Sasha
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH AUTOSEL 5.4 003/205] drm/v3d: don't leak bin job if v3d_job_init fails.

[Iago Toral]

On Thu, 2020-01-23 at 09:17 -0500, Sasha Levin wrote:
> On Fri, Jan 17, 2020 at 08:25:30AM +0100, Iago Toral wrote:
> > Hi Sasha,
> > 
> > 
> > please notice that there were two separate patches that addressed
> > the
> > same issue and applying both simultaneously leads to a double free
> > (which is what I see is happening with this patch: see the second
> > call
> > to kfree(bin) right below the one added here). This issue was
> > raised
> > previously here:
> > 
> > https://lists.freedesktop.org/archives/dri-devel/2019-October/241425.html
> 
> I'll drop this patch for now. Any idea why upstream didn't pick up
> the
> fix yet? I see the problem still exists there.

+Daniel

I am not sure, when this issue was found Daniel added a few people on
CC as heads-up, but maybe nobody actually got to fix the merge conflict
in the end?

Iago

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 004/205] drm: panel-lvds: Potential Oops in probe error handling

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit fb2ee9bf084bcaeff1e5be100decc0eacb4af2d5 ]

The "lvds->backlight" pointer could be NULL in situations where
of_parse_phandle() returns NULL.  This code is cleaner if we use the
managed devm_of_find_backlight() so the clean up is automatic.

Fixes: 7c9dff5bd643 ("drm: panels: Add LVDS panel driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190911104928.GA15930@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/panel/panel-lvds.c | 21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c
index ad47cc95459e..bf5fcc3e5379 100644
--- a/drivers/gpu/drm/panel/panel-lvds.c
+++ b/drivers/gpu/drm/panel/panel-lvds.c
@@ -197,7 +197,6 @@ static int panel_lvds_parse_dt(struct panel_lvds *lvds)
 static int panel_lvds_probe(struct platform_device *pdev)
 {
 	struct panel_lvds *lvds;
-	struct device_node *np;
 	int ret;
 
 	lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
@@ -243,14 +242,9 @@ static int panel_lvds_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	np = of_parse_phandle(lvds->dev->of_node, "backlight", 0);
-	if (np) {
-		lvds->backlight = of_find_backlight_by_node(np);
-		of_node_put(np);
-
-		if (!lvds->backlight)
-			return -EPROBE_DEFER;
-	}
+	lvds->backlight = devm_of_find_backlight(lvds->dev);
+	if (IS_ERR(lvds->backlight))
+		return PTR_ERR(lvds->backlight);
 
 	/*
 	 * TODO: Handle all power supplies specified in the DT node in a generic
@@ -266,14 +260,10 @@ static int panel_lvds_probe(struct platform_device *pdev)
 
 	ret = drm_panel_add(&lvds->panel);
 	if (ret < 0)
-		goto error;
+		return ret;
 
 	dev_set_drvdata(lvds->dev, lvds);
 	return 0;
-
-error:
-	put_device(&lvds->backlight->dev);
-	return ret;
 }
 
 static int panel_lvds_remove(struct platform_device *pdev)
@@ -284,9 +274,6 @@ static int panel_lvds_remove(struct platform_device *pdev)
 
 	panel_lvds_disable(&lvds->panel);
 
-	if (lvds->backlight)
-		put_device(&lvds->backlight->dev);
-
 	return 0;
 }
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 019/205] drm/amdgpu: remove excess function parameter description

[Sasha Levin]

From: yu kuai <yukuai3@huawei.com>

[ Upstream commit d0580c09c65cff211f589a40e08eabc62da463fb ]

Fixes gcc warning:

drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:431: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_disable_clock_gating'
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:550: warning: Excess function
parameter 'sw' description in 'vcn_v2_5_enable_clock_gating'

Fixes: cbead2bdfcf1 ("drm/amdgpu: add VCN2.5 VCPU start and stop")
Signed-off-by: yu kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
index 395c2259f979..9d778a0b2c5e 100644
--- a/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
+++ b/drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c
@@ -423,7 +423,6 @@ static void vcn_v2_5_mc_resume(struct amdgpu_device *adev)
  * vcn_v2_5_disable_clock_gating - disable VCN clock gating
  *
  * @adev: amdgpu_device pointer
- * @sw: enable SW clock gating
  *
  * Disable clock gating for VCN block
  */
@@ -542,7 +541,6 @@ static void vcn_v2_5_disable_clock_gating(struct amdgpu_device *adev)
  * vcn_v2_5_enable_clock_gating - enable VCN clock gating
  *
  * @adev: amdgpu_device pointer
- * @sw: enable SW clock gating
  *
  * Enable clock gating for VCN block
  */
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 035/205] drm/rockchip: Round up _before_ giving to the clock framework

[Sasha Levin]

From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit 287422a95fe28e05c1952de0472e0dfdffa6caae ]

I'm embarassed to say that even though I've touched
vop_crtc_mode_fixup() twice and I swear I tested it, there's still a
stupid glaring bug in it.  Specifically, on veyron_minnie (with all
the latest display timings) we want to be setting our pixel clock to
66,666,666.67 Hz and we tell userspace that's what we set, but we're
actually choosing 66,000,000 Hz.  This is confirmed by looking at the
clock tree.

The problem is that in drm_display_mode_from_videomode() we convert
from Hz to kHz with:

  dmode->clock = vm->pixelclock / 1000;

...and drm_display_mode_from_videomode() is called from panel-simple
when we have an "override_mode" like we do on veyron_minnie.  See
commit 123643e5c40a ("ARM: dts: rockchip: Specify
rk3288-veyron-minnie's display timings").

...so when the device tree specifies a clock of 66666667 for the panel
then DRM translates that to 66666000.  The clock framework will always
pick a clock that is _lower_ than the one requested, so it will refuse
to pick 66666667 and we'll end up at 66000000.

While we could try to fix drm_display_mode_from_videomode() to round
to the nearest kHz and it would fix our problem, it wouldn't help if
the clock we actually needed was 60,000,001 Hz.  We could
alternatively have DRM always round up, but maybe this would break
someone else who already baked in the assumption that DRM rounds down.
Specifically note that clock drivers are not consistent about whether
they round up or round down when you call clk_set_rate().  We know how
Rockchip's clock driver works, but (for instance) you can see that on
most Qualcomm clocks the default is clk_rcg2_ops which rounds up.

Let's solve this by just adding 999 Hz before calling
clk_round_rate().  This should be safe and work everywhere.  As
discussed in more detail in comments in the commit, Rockchip's PLLs
are configured in a way that there shouldn't be another PLL setting
that is only a few kHz off so we won't get mixed up.

NOTE: if this is picked to stable, it's probably easiest to first pick
commit 527e4ca3b6d1 ("drm/rockchip: Base adjustments of the mode based
on prev adjustments") which shouldn't hurt in stable.

Fixes: b59b8de31497 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191003114726.v2.1.Ib233b3e706cf6317858384264d5b0ed35657456e@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 37 +++++++++++++++++++--
 1 file changed, 34 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 613404f86668..84e3decb17b1 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -1040,10 +1040,41 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
 				struct drm_display_mode *adjusted_mode)
 {
 	struct vop *vop = to_vop(crtc);
+	unsigned long rate;
 
-	adjusted_mode->clock =
-		DIV_ROUND_UP(clk_round_rate(vop->dclk,
-					    adjusted_mode->clock * 1000), 1000);
+	/*
+	 * Clock craziness.
+	 *
+	 * Key points:
+	 *
+	 * - DRM works in in kHz.
+	 * - Clock framework works in Hz.
+	 * - Rockchip's clock driver picks the clock rate that is the
+	 *   same _OR LOWER_ than the one requested.
+	 *
+	 * Action plan:
+	 *
+	 * 1. When DRM gives us a mode, we should add 999 Hz to it.  That way
+	 *    if the clock we need is 60000001 Hz (~60 MHz) and DRM tells us to
+	 *    make 60000 kHz then the clock framework will actually give us
+	 *    the right clock.
+	 *
+	 *    NOTE: if the PLL (maybe through a divider) could actually make
+	 *    a clock rate 999 Hz higher instead of the one we want then this
+	 *    could be a problem.  Unfortunately there's not much we can do
+	 *    since it's baked into DRM to use kHz.  It shouldn't matter in
+	 *    practice since Rockchip PLLs are controlled by tables and
+	 *    even if there is a divider in the middle I wouldn't expect PLL
+	 *    rates in the table that are just a few kHz different.
+	 *
+	 * 2. Get the clock framework to round the rate for us to tell us
+	 *    what it will actually make.
+	 *
+	 * 3. Store the rounded up rate so that we don't need to worry about
+	 *    this in the actual clk_set_rate().
+	 */
+	rate = clk_round_rate(vop->dclk, adjusted_mode->clock * 1000 + 999);
+	adjusted_mode->clock = DIV_ROUND_UP(rate, 1000);
 
 	return true;
 }
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 048/205] drm: rcar_lvds: Fix color mismatches on R-Car H2 ES2.0 and later

[Sasha Levin]

From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit 3986457110a054466bf02f9c4a85aa2bba96177b ]

Commit 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk") states
that LVDS lanes 1 and 3 are inverted on R-Car H2 ES1 only, and that the
problem has been fixed in newer revisions.

However, the code didn't take into account the actual hardware revision,
thus applying the quirk also on newer hardware revisions, causing green
color reversals.

Fix this by applying the quirk when running on R-Car H2 ES1.x only.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 5cca30ebe089be23 ("drm/rcar-du: Add LVDS_LANES quirk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/rcar-du/rcar_lvds.c | 28 +++++++++++++++++++++-------
 1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_lvds.c b/drivers/gpu/drm/rcar-du/rcar_lvds.c
index 3fc7e6899cab..50c11a7f0467 100644
--- a/drivers/gpu/drm/rcar-du/rcar_lvds.c
+++ b/drivers/gpu/drm/rcar-du/rcar_lvds.c
@@ -16,6 +16,7 @@
 #include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/sys_soc.h>
 
 #include <drm/drm_atomic.h>
 #include <drm/drm_atomic_helper.h>
@@ -842,8 +843,23 @@ static int rcar_lvds_get_clocks(struct rcar_lvds *lvds)
 	return 0;
 }
 
+static const struct rcar_lvds_device_info rcar_lvds_r8a7790es1_info = {
+	.gen = 2,
+	.quirks = RCAR_LVDS_QUIRK_LANES,
+	.pll_setup = rcar_lvds_pll_setup_gen2,
+};
+
+static const struct soc_device_attribute lvds_quirk_matches[] = {
+	{
+		.soc_id = "r8a7790", .revision = "ES1.*",
+		.data = &rcar_lvds_r8a7790es1_info,
+	},
+	{ /* sentinel */ }
+};
+
 static int rcar_lvds_probe(struct platform_device *pdev)
 {
+	const struct soc_device_attribute *attr;
 	struct rcar_lvds *lvds;
 	struct resource *mem;
 	int ret;
@@ -857,6 +873,10 @@ static int rcar_lvds_probe(struct platform_device *pdev)
 	lvds->dev = &pdev->dev;
 	lvds->info = of_device_get_match_data(&pdev->dev);
 
+	attr = soc_device_match(lvds_quirk_matches);
+	if (attr)
+		lvds->info = attr->data;
+
 	ret = rcar_lvds_parse_dt(lvds);
 	if (ret < 0)
 		return ret;
@@ -893,12 +913,6 @@ static const struct rcar_lvds_device_info rcar_lvds_gen2_info = {
 	.pll_setup = rcar_lvds_pll_setup_gen2,
 };
 
-static const struct rcar_lvds_device_info rcar_lvds_r8a7790_info = {
-	.gen = 2,
-	.quirks = RCAR_LVDS_QUIRK_LANES,
-	.pll_setup = rcar_lvds_pll_setup_gen2,
-};
-
 static const struct rcar_lvds_device_info rcar_lvds_gen3_info = {
 	.gen = 3,
 	.quirks = RCAR_LVDS_QUIRK_PWD,
@@ -930,7 +944,7 @@ static const struct of_device_id rcar_lvds_of_table[] = {
 	{ .compatible = "renesas,r8a7744-lvds", .data = &rcar_lvds_gen2_info },
 	{ .compatible = "renesas,r8a774a1-lvds", .data = &rcar_lvds_gen3_info },
 	{ .compatible = "renesas,r8a774c0-lvds", .data = &rcar_lvds_r8a77990_info },
-	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_r8a7790_info },
+	{ .compatible = "renesas,r8a7790-lvds", .data = &rcar_lvds_gen2_info },
 	{ .compatible = "renesas,r8a7791-lvds", .data = &rcar_lvds_gen2_info },
 	{ .compatible = "renesas,r8a7793-lvds", .data = &rcar_lvds_gen2_info },
 	{ .compatible = "renesas,r8a7795-lvds", .data = &rcar_lvds_gen3_info },
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 058/205] xprtrdma: Connection becomes unstable after a reconnect

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit a31b2f939219dd9bffdf01a45bd91f209f8cc369 ]

This is because xprt_request_get_cong() is allowing more than one
RPC Call to be transmitted before the first Receive on the new
connection. The first Receive fills the Receive Queue based on the
server's credit grant. Before that Receive, there is only a single
Receive WR posted because the client doesn't know the server's
credit grant.

Solution is to clear rq_cong on all outstanding rpc_rqsts when the
the cwnd is reset. This is because an RPC/RDMA credit is good for
one connection instance only.

Fixes: 75891f502f5f ("SUNRPC: Support for congestion control ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/transport.c |  3 +++
 net/sunrpc/xprtrdma/verbs.c     | 22 ++++++++++++++++++++++
 2 files changed, 25 insertions(+)

diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c
index 160558b4135e..c67d465dc062 100644
--- a/net/sunrpc/xprtrdma/transport.c
+++ b/net/sunrpc/xprtrdma/transport.c
@@ -428,8 +428,11 @@ void xprt_rdma_close(struct rpc_xprt *xprt)
 	/* Prepare @xprt for the next connection by reinitializing
 	 * its credit grant to one (see RFC 8166, Section 3.3.3).
 	 */
+	spin_lock(&xprt->transport_lock);
 	r_xprt->rx_buf.rb_credits = 1;
+	xprt->cong = 0;
 	xprt->cwnd = RPC_CWNDSHIFT;
+	spin_unlock(&xprt->transport_lock);
 
 out:
 	xprt->reestablish_timeout = 0;
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index 3a907537e2cf..f4b136504e96 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -75,6 +75,7 @@
  * internal functions
  */
 static void rpcrdma_sendctx_put_locked(struct rpcrdma_sendctx *sc);
+static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf);
@@ -780,6 +781,7 @@ rpcrdma_ep_disconnect(struct rpcrdma_ep *ep, struct rpcrdma_ia *ia)
 	trace_xprtrdma_disconnect(r_xprt, rc);
 
 	rpcrdma_xprt_drain(r_xprt);
+	rpcrdma_reqs_reset(r_xprt);
 }
 
 /* Fixed-size circular FIFO queue. This implementation is wait-free and
@@ -1042,6 +1044,26 @@ struct rpcrdma_req *rpcrdma_req_create(struct rpcrdma_xprt *r_xprt, size_t size,
 	return NULL;
 }
 
+/**
+ * rpcrdma_reqs_reset - Reset all reqs owned by a transport
+ * @r_xprt: controlling transport instance
+ *
+ * ASSUMPTION: the rb_allreqs list is stable for the duration,
+ * and thus can be walked without holding rb_lock. Eg. the
+ * caller is holding the transport send lock to exclude
+ * device removal or disconnection.
+ */
+static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt)
+{
+	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
+	struct rpcrdma_req *req;
+
+	list_for_each_entry(req, &buf->rb_allreqs, rl_all) {
+		/* Credits are valid only for one connection */
+		req->rl_slot.rq_cong = 0;
+	}
+}
+
 static struct rpcrdma_rep *rpcrdma_rep_create(struct rpcrdma_xprt *r_xprt,
 					      bool temp)
 {
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 059/205] xprtrdma: Fix MR list handling

[Sasha Levin]

From: Chuck Lever <chuck.lever@oracle.com>

[ Upstream commit c3700780a096fc66467c81076ddf7f3f11d639b5 ]

Close some holes introduced by commit 6dc6ec9e04c4 ("xprtrdma: Cache
free MRs in each rpcrdma_req") that could result in list corruption.

In addition, the result that is tabulated in @count is no longer
used, so @count is removed.

Fixes: 6dc6ec9e04c4 ("xprtrdma: Cache free MRs in each rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/sunrpc/xprtrdma/verbs.c | 41 +++++++++++++++++++------------------
 1 file changed, 21 insertions(+), 20 deletions(-)

diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c
index f4b136504e96..be74ff8f7873 100644
--- a/net/sunrpc/xprtrdma/verbs.c
+++ b/net/sunrpc/xprtrdma/verbs.c
@@ -79,7 +79,6 @@ static void rpcrdma_reqs_reset(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_reps_destroy(struct rpcrdma_buffer *buf);
 static void rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt);
 static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf);
-static void rpcrdma_mr_free(struct rpcrdma_mr *mr);
 static struct rpcrdma_regbuf *
 rpcrdma_regbuf_alloc(size_t size, enum dma_data_direction direction,
 		     gfp_t flags);
@@ -967,7 +966,7 @@ rpcrdma_mrs_create(struct rpcrdma_xprt *r_xprt)
 		mr->mr_xprt = r_xprt;
 
 		spin_lock(&buf->rb_lock);
-		list_add(&mr->mr_list, &buf->rb_mrs);
+		rpcrdma_mr_push(mr, &buf->rb_mrs);
 		list_add(&mr->mr_all, &buf->rb_all_mrs);
 		spin_unlock(&buf->rb_lock);
 	}
@@ -1185,10 +1184,19 @@ int rpcrdma_buffer_create(struct rpcrdma_xprt *r_xprt)
  */
 void rpcrdma_req_destroy(struct rpcrdma_req *req)
 {
+	struct rpcrdma_mr *mr;
+
 	list_del(&req->rl_all);
 
-	while (!list_empty(&req->rl_free_mrs))
-		rpcrdma_mr_free(rpcrdma_mr_pop(&req->rl_free_mrs));
+	while ((mr = rpcrdma_mr_pop(&req->rl_free_mrs))) {
+		struct rpcrdma_buffer *buf = &mr->mr_xprt->rx_buf;
+
+		spin_lock(&buf->rb_lock);
+		list_del(&mr->mr_all);
+		spin_unlock(&buf->rb_lock);
+
+		frwr_release_mr(mr);
+	}
 
 	rpcrdma_regbuf_free(req->rl_recvbuf);
 	rpcrdma_regbuf_free(req->rl_sendbuf);
@@ -1196,24 +1204,28 @@ void rpcrdma_req_destroy(struct rpcrdma_req *req)
 	kfree(req);
 }
 
-static void
-rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf)
+/**
+ * rpcrdma_mrs_destroy - Release all of a transport's MRs
+ * @buf: controlling buffer instance
+ *
+ * Relies on caller holding the transport send lock to protect
+ * removing mr->mr_list from req->rl_free_mrs safely.
+ */
+static void rpcrdma_mrs_destroy(struct rpcrdma_buffer *buf)
 {
 	struct rpcrdma_xprt *r_xprt = container_of(buf, struct rpcrdma_xprt,
 						   rx_buf);
 	struct rpcrdma_mr *mr;
-	unsigned int count;
 
-	count = 0;
 	spin_lock(&buf->rb_lock);
 	while ((mr = list_first_entry_or_null(&buf->rb_all_mrs,
 					      struct rpcrdma_mr,
 					      mr_all)) != NULL) {
+		list_del(&mr->mr_list);
 		list_del(&mr->mr_all);
 		spin_unlock(&buf->rb_lock);
 
 		frwr_release_mr(mr);
-		count++;
 		spin_lock(&buf->rb_lock);
 	}
 	spin_unlock(&buf->rb_lock);
@@ -1286,17 +1298,6 @@ void rpcrdma_mr_put(struct rpcrdma_mr *mr)
 	rpcrdma_mr_push(mr, &mr->mr_req->rl_free_mrs);
 }
 
-static void rpcrdma_mr_free(struct rpcrdma_mr *mr)
-{
-	struct rpcrdma_xprt *r_xprt = mr->mr_xprt;
-	struct rpcrdma_buffer *buf = &r_xprt->rx_buf;
-
-	mr->mr_req = NULL;
-	spin_lock(&buf->rb_lock);
-	rpcrdma_mr_push(mr, &buf->rb_mrs);
-	spin_unlock(&buf->rb_lock);
-}
-
 /**
  * rpcrdma_buffer_get - Get a request buffer
  * @buffers: Buffer pool from which to obtain a buffer
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 060/205] drm/tegra: Fix ordering of cleanup code

[Sasha Levin]

From: Thierry Reding <treding@nvidia.com>

[ Upstream commit 051172e8c1ceef8749f19faacc1d3bef65d20d8d ]

Commit Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after
initialization") changed the initialization order of the IOMMU related
bits but didn't update the cleanup path accordingly. This asymmetry can
cause failures during error recovery.

Fixes: b9f8b09ce256 ("drm/tegra: Setup shared IOMMU domain after initialization")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/tegra/drm.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/tegra/drm.c b/drivers/gpu/drm/tegra/drm.c
index 6fb7d74ff553..bc7cc32140f8 100644
--- a/drivers/gpu/drm/tegra/drm.c
+++ b/drivers/gpu/drm/tegra/drm.c
@@ -201,19 +201,19 @@ static int tegra_drm_load(struct drm_device *drm, unsigned long flags)
 	if (tegra->hub)
 		tegra_display_hub_cleanup(tegra->hub);
 device:
-	host1x_device_exit(device);
-fbdev:
-	drm_kms_helper_poll_fini(drm);
-	tegra_drm_fb_free(drm);
-config:
-	drm_mode_config_cleanup(drm);
-
 	if (tegra->domain) {
 		mutex_destroy(&tegra->mm_lock);
 		drm_mm_takedown(&tegra->mm);
 		put_iova_domain(&tegra->carveout.domain);
 		iova_cache_put();
 	}
+
+	host1x_device_exit(device);
+fbdev:
+	drm_kms_helper_poll_fini(drm);
+	tegra_drm_fb_free(drm);
+config:
+	drm_mode_config_cleanup(drm);
 domain:
 	if (tegra->domain)
 		iommu_domain_free(tegra->domain);
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 066/205] drm/amdgpu/vi: silence an uninitialized variable warning

[Sasha Levin]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 4ff17a1df7d550257972a838220a8af4611c8f2c ]

Smatch complains that we need to initialized "*cap" otherwise it can
lead to an uninitialized variable bug in the caller.  This seems like a
reasonable warning and it doesn't hurt to silence it at least.

drivers/gpu/drm/amd/amdgpu/vi.c:767 vi_asic_reset_method() error: uninitialized symbol 'baco_reset'.

Fixes: 425db2553e43 ("drm/amdgpu: expose BACO interfaces to upper level from PP")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/powerplay/amd_powerplay.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
index fa8ad7db2b3a..d306cc711997 100644
--- a/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
+++ b/drivers/gpu/drm/amd/powerplay/amd_powerplay.c
@@ -1421,6 +1421,7 @@ static int pp_get_asic_baco_capability(void *handle, bool *cap)
 {
 	struct pp_hwmgr *hwmgr = handle;
 
+	*cap = false;
 	if (!hwmgr)
 		return -EINVAL;
 
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH AUTOSEL 5.4 169/205] drm/radeon: fix bad DMA from INTERRUPT_CNTL2

[Sasha Levin]

From: Sam Bobroff <sbobroff@linux.ibm.com>

[ Upstream commit 62d91dd2851e8ae2ca552f1b090a3575a4edf759 ]

The INTERRUPT_CNTL2 register expects a valid DMA address, but is
currently set with a GPU MC address.  This can cause problems on
systems that detect the resulting DMA read from an invalid address
(found on a Power8 guest).

Instead, use the DMA address of the dummy page because it will always
be safe.

Fixes: d8f60cfc9345 ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)")
Fixes: 25a857fbe973 ("drm/radeon/kms: add support for interrupts on SI")
Fixes: a59781bbe528 ("drm/radeon: add support for interrupts on CIK (v5)")
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/radeon/cik.c  | 4 ++--
 drivers/gpu/drm/radeon/r600.c | 4 ++--
 drivers/gpu/drm/radeon/si.c   | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 62eab82a64f9..897442754fd0 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -6969,8 +6969,8 @@ static int cik_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* XXX this should actually be a bus address, not an MC address. same on older asics */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index e937cc01910d..033bc466a862 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3696,8 +3696,8 @@ int r600_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 05894d198a79..1d8efb0eefdb 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5997,8 +5997,8 @@ static int si_irq_init(struct radeon_device *rdev)
 	}
 
 	/* setup interrupt control */
-	/* set dummy read address to ring address */
-	WREG32(INTERRUPT_CNTL2, rdev->ih.gpu_addr >> 8);
+	/* set dummy read address to dummy page address */
+	WREG32(INTERRUPT_CNTL2, rdev->dummy_page.addr >> 8);
 	interrupt_cntl = RREG32(INTERRUPT_CNTL);
 	/* IH_DUMMY_RD_OVERRIDE=0 - dummy read disabled with msi, enabled without msi
 	 * IH_DUMMY_RD_OVERRIDE=1 - dummy read controlled by IH_DUMMY_RD_EN
-- 
2.20.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel