* [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
@ 2020-03-03 0:08 Manasi Navare
2020-03-03 13:42 ` Ville Syrjälä
0 siblings, 1 reply; 4+ messages in thread
From: Manasi Navare @ 2020-03-03 0:08 UTC (permalink / raw)
To: intel-gfx, dri-devel; +Cc: Kazlauskas, Manasi Navare, Nicholas
Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers
v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
drivers/gpu/drm/drm_edid.c | 44 +++++++++++++++++++++++++++++++++++++
include/drm/drm_connector.h | 22 +++++++++++++++++++
2 files changed, 66 insertions(+)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index ad41764a4ebe..e3f152180b6b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4938,6 +4938,47 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
}
}
+static
+void get_adaptive_sync_range(struct detailed_timing *timing,
+ void *info_adaptive_sync)
+{
+ struct drm_adaptive_sync_info *adaptive_sync = info_adaptive_sync;
+ const struct detailed_non_pixel *data = &timing->data.other_data;
+ const struct detailed_data_monitor_range *range = &data->data.range;
+
+ if (data->type != EDID_DETAIL_MONITOR_RANGE)
+ return;
+
+ /*
+ * Check for flag range limits only. If flag == 1 then
+ * no additional timing information provided.
+ * Default GTF, GTF Secondary curve and CVT are not
+ * supported
+ */
+ if (range->flags != 1)
+ return;
+
+ adaptive_sync->min_vfreq = range->min_vfreq;
+ adaptive_sync->max_vfreq = range->max_vfreq;
+}
+
+static
+void drm_get_adaptive_sync_range(struct drm_connector *connector,
+ const struct edid *edid)
+{
+ struct drm_display_info *info = &connector->display_info;
+
+ if (!version_greater(edid, 1, 1))
+ return;
+
+ drm_for_each_detailed_block((u8 *)edid, get_adaptive_sync_range,
+ &info->adaptive_sync);
+
+ DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
+ info->adaptive_sync.min_vfreq,
+ info->adaptive_sync.max_vfreq);
+}
+
/* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
* all of the values which would have been set from EDID
*/
@@ -4960,6 +5001,7 @@ drm_reset_display_info(struct drm_connector *connector)
memset(&info->hdmi, 0, sizeof(info->hdmi));
info->non_desktop = 0;
+ memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
}
u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
@@ -4975,6 +5017,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
+ drm_get_adaptive_sync_range(connector, edid);
+
DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
if (edid->revision < 3)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 0df7a95ca5d9..2b22c0fa42c4 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -254,6 +254,23 @@ enum drm_panel_orientation {
DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
};
+/**
+ * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
+ * &drm_display_info
+ *
+ * This struct is used to store a Panel's Adaptive Sync capabilities
+ * as parsed from EDID's detailed monitor range descriptor block.
+ *
+ * @min_vfreq: This is the min supported refresh rate in Hz from
+ * EDID's detailed monitor range.
+ * @max_vfreq: This is the max supported refresh rate in Hz from
+ * EDID's detailed monitor range
+ */
+struct drm_adaptive_sync_info {
+ u8 min_vfreq;
+ u8 max_vfreq;
+};
+
/*
* This is a consolidated colorimetry list supported by HDMI and
* DP protocol standard. The respective connectors will register
@@ -473,6 +490,11 @@ struct drm_display_info {
* @non_desktop: Non desktop display (HMD).
*/
bool non_desktop;
+
+ /**
+ * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
+ */
+ struct drm_adaptive_sync_info adaptive_sync;
};
int drm_display_info_set_bus_formats(struct drm_display_info *info,
--
2.19.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
2020-03-03 0:08 [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
@ 2020-03-03 13:42 ` Ville Syrjälä
2020-03-04 17:36 ` Manasi Navare
0 siblings, 1 reply; 4+ messages in thread
From: Ville Syrjälä @ 2020-03-03 13:42 UTC (permalink / raw)
To: Manasi Navare; +Cc: intel-gfx, dri-devel, Kazlauskas, Nicholas
On Mon, Mar 02, 2020 at 04:08:59PM -0800, Manasi Navare wrote:
> Adaptive Sync is a VESA feature so add a DRM core helper to parse
> the EDID's detailed descritors to obtain the adaptive sync monitor range.
> Store this info as part fo drm_display_info so it can be used
> across all drivers.
> This part of the code is stripped out of amdgpu's function
> amdgpu_dm_update_freesync_caps() to make it generic and be used
> across all DRM drivers
>
> v3:
> * Remove the edid parsing restriction for just DP (Nicholas)
> * Use drm_for_each_detailed_block (Ville)
> * Make the drm_get_adaptive_sync_range function static (Harry, Jani)
> v2:
> * Change vmin and vmax to use u8 (Ville)
> * Dont store pixel clock since that is just a max dotclock
> and not related to VRR mode (Manasi)
>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Cc: Harry Wentland <harry.wentland@amd.com>
> Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@amd.com>
> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> ---
> drivers/gpu/drm/drm_edid.c | 44 +++++++++++++++++++++++++++++++++++++
> include/drm/drm_connector.h | 22 +++++++++++++++++++
> 2 files changed, 66 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> index ad41764a4ebe..e3f152180b6b 100644
> --- a/drivers/gpu/drm/drm_edid.c
> +++ b/drivers/gpu/drm/drm_edid.c
> @@ -4938,6 +4938,47 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> }
> }
>
> +static
> +void get_adaptive_sync_range(struct detailed_timing *timing,
> + void *info_adaptive_sync)
> +{
> + struct drm_adaptive_sync_info *adaptive_sync = info_adaptive_sync;
> + const struct detailed_non_pixel *data = &timing->data.other_data;
> + const struct detailed_data_monitor_range *range = &data->data.range;
> +
> + if (data->type != EDID_DETAIL_MONITOR_RANGE)a
is_display_descriptor()
> + return;
> +
> + /*
> + * Check for flag range limits only. If flag == 1 then
> + * no additional timing information provided.
> + * Default GTF, GTF Secondary curve and CVT are not
> + * supported
> + */
> + if (range->flags != 1)
Pls name the flags.
> + return;
> +
> + adaptive_sync->min_vfreq = range->min_vfreq;
> + adaptive_sync->max_vfreq = range->max_vfreq;
> +}
> +
> +static
> +void drm_get_adaptive_sync_range(struct drm_connector *connector,
> + const struct edid *edid)
> +{
> + struct drm_display_info *info = &connector->display_info;
> +
> + if (!version_greater(edid, 1, 1))
> + return;
> +
> + drm_for_each_detailed_block((u8 *)edid, get_adaptive_sync_range,
> + &info->adaptive_sync);
> +
> + DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> + info->adaptive_sync.min_vfreq,
> + info->adaptive_sync.max_vfreq);
> +}
> +
> /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> * all of the values which would have been set from EDID
> */
> @@ -4960,6 +5001,7 @@ drm_reset_display_info(struct drm_connector *connector)
> memset(&info->hdmi, 0, sizeof(info->hdmi));
>
> info->non_desktop = 0;
> + memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> }
>
> u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> @@ -4975,6 +5017,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
>
> info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
>
> + drm_get_adaptive_sync_range(connector, edid);
> +
> DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
>
> if (edid->revision < 3)
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 0df7a95ca5d9..2b22c0fa42c4 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> };
>
> +/**
> + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> + * &drm_display_info
> + *
> + * This struct is used to store a Panel's Adaptive Sync capabilities
> + * as parsed from EDID's detailed monitor range descriptor block.
> + *
> + * @min_vfreq: This is the min supported refresh rate in Hz from
> + * EDID's detailed monitor range.
> + * @max_vfreq: This is the max supported refresh rate in Hz from
> + * EDID's detailed monitor range
> + */
> +struct drm_adaptive_sync_info {
> + u8 min_vfreq;
> + u8 max_vfreq;
> +};
> +
> /*
> * This is a consolidated colorimetry list supported by HDMI and
> * DP protocol standard. The respective connectors will register
> @@ -473,6 +490,11 @@ struct drm_display_info {
> * @non_desktop: Non desktop display (HMD).
> */
> bool non_desktop;
> +
> + /**
> + * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> + */
> + struct drm_adaptive_sync_info adaptive_sync;
> };
>
> int drm_display_info_set_bus_formats(struct drm_display_info *info,
> --
> 2.19.1
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
2020-03-03 13:42 ` Ville Syrjälä
@ 2020-03-04 17:36 ` Manasi Navare
2020-03-04 18:31 ` Ville Syrjälä
0 siblings, 1 reply; 4+ messages in thread
From: Manasi Navare @ 2020-03-04 17:36 UTC (permalink / raw)
To: Ville Syrjälä; +Cc: intel-gfx, Kazlauskas, dri-devel, Nicholas
On Tue, Mar 03, 2020 at 03:42:12PM +0200, Ville Syrjälä wrote:
> On Mon, Mar 02, 2020 at 04:08:59PM -0800, Manasi Navare wrote:
> > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > Store this info as part fo drm_display_info so it can be used
> > across all drivers.
> > This part of the code is stripped out of amdgpu's function
> > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > across all DRM drivers
> >
> > v3:
> > * Remove the edid parsing restriction for just DP (Nicholas)
> > * Use drm_for_each_detailed_block (Ville)
> > * Make the drm_get_adaptive_sync_range function static (Harry, Jani)
> > v2:
> > * Change vmin and vmax to use u8 (Ville)
> > * Dont store pixel clock since that is just a max dotclock
> > and not related to VRR mode (Manasi)
> >
> > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Cc: Harry Wentland <harry.wentland@amd.com>
> > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@amd.com>
> > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > ---
> > drivers/gpu/drm/drm_edid.c | 44 +++++++++++++++++++++++++++++++++++++
> > include/drm/drm_connector.h | 22 +++++++++++++++++++
> > 2 files changed, 66 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index ad41764a4ebe..e3f152180b6b 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -4938,6 +4938,47 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> > }
> > }
> >
> > +static
> > +void get_adaptive_sync_range(struct detailed_timing *timing,
> > + void *info_adaptive_sync)
> > +{
> > + struct drm_adaptive_sync_info *adaptive_sync = info_adaptive_sync;
> > + const struct detailed_non_pixel *data = &timing->data.other_data;
> > + const struct detailed_data_monitor_range *range = &data->data.range;
> > +
> > + if (data->type != EDID_DETAIL_MONITOR_RANGE)a
>
> is_display_descriptor()
Will change to use is_display_descriptor()
>
> > + return;
> > +
> > + /*
> > + * Check for flag range limits only. If flag == 1 then
> > + * no additional timing information provided.
> > + * Default GTF, GTF Secondary curve and CVT are not
> > + * supported
> > + */
> > + if (range->flags != 1)
>
> Pls name the flags.
I dont see that we have any enum with the flag names, do you want me to define them looking
at EDID spec?
Manasi
>
> > + return;
> > +
> > + adaptive_sync->min_vfreq = range->min_vfreq;
> > + adaptive_sync->max_vfreq = range->max_vfreq;
> > +}
> > +
> > +static
> > +void drm_get_adaptive_sync_range(struct drm_connector *connector,
> > + const struct edid *edid)
> > +{
> > + struct drm_display_info *info = &connector->display_info;
> > +
> > + if (!version_greater(edid, 1, 1))
> > + return;
> > +
> > + drm_for_each_detailed_block((u8 *)edid, get_adaptive_sync_range,
> > + &info->adaptive_sync);
> > +
> > + DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
> > + info->adaptive_sync.min_vfreq,
> > + info->adaptive_sync.max_vfreq);
> > +}
> > +
> > /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
> > * all of the values which would have been set from EDID
> > */
> > @@ -4960,6 +5001,7 @@ drm_reset_display_info(struct drm_connector *connector)
> > memset(&info->hdmi, 0, sizeof(info->hdmi));
> >
> > info->non_desktop = 0;
> > + memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
> > }
> >
> > u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
> > @@ -4975,6 +5017,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
> >
> > info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
> >
> > + drm_get_adaptive_sync_range(connector, edid);
> > +
> > DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
> >
> > if (edid->revision < 3)
> > diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> > index 0df7a95ca5d9..2b22c0fa42c4 100644
> > --- a/include/drm/drm_connector.h
> > +++ b/include/drm/drm_connector.h
> > @@ -254,6 +254,23 @@ enum drm_panel_orientation {
> > DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
> > };
> >
> > +/**
> > + * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
> > + * &drm_display_info
> > + *
> > + * This struct is used to store a Panel's Adaptive Sync capabilities
> > + * as parsed from EDID's detailed monitor range descriptor block.
> > + *
> > + * @min_vfreq: This is the min supported refresh rate in Hz from
> > + * EDID's detailed monitor range.
> > + * @max_vfreq: This is the max supported refresh rate in Hz from
> > + * EDID's detailed monitor range
> > + */
> > +struct drm_adaptive_sync_info {
> > + u8 min_vfreq;
> > + u8 max_vfreq;
> > +};
> > +
> > /*
> > * This is a consolidated colorimetry list supported by HDMI and
> > * DP protocol standard. The respective connectors will register
> > @@ -473,6 +490,11 @@ struct drm_display_info {
> > * @non_desktop: Non desktop display (HMD).
> > */
> > bool non_desktop;
> > +
> > + /**
> > + * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
> > + */
> > + struct drm_adaptive_sync_info adaptive_sync;
> > };
> >
> > int drm_display_info_set_bus_formats(struct drm_display_info *info,
> > --
> > 2.19.1
>
> --
> Ville Syrjälä
> Intel
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
2020-03-04 17:36 ` Manasi Navare
@ 2020-03-04 18:31 ` Ville Syrjälä
0 siblings, 0 replies; 4+ messages in thread
From: Ville Syrjälä @ 2020-03-04 18:31 UTC (permalink / raw)
To: Manasi Navare; +Cc: intel-gfx, Kazlauskas, dri-devel, Nicholas
On Wed, Mar 04, 2020 at 09:36:06AM -0800, Manasi Navare wrote:
> On Tue, Mar 03, 2020 at 03:42:12PM +0200, Ville Syrjälä wrote:
> > On Mon, Mar 02, 2020 at 04:08:59PM -0800, Manasi Navare wrote:
> > > Adaptive Sync is a VESA feature so add a DRM core helper to parse
> > > the EDID's detailed descritors to obtain the adaptive sync monitor range.
> > > Store this info as part fo drm_display_info so it can be used
> > > across all drivers.
> > > This part of the code is stripped out of amdgpu's function
> > > amdgpu_dm_update_freesync_caps() to make it generic and be used
> > > across all DRM drivers
> > >
> > > v3:
> > > * Remove the edid parsing restriction for just DP (Nicholas)
> > > * Use drm_for_each_detailed_block (Ville)
> > > * Make the drm_get_adaptive_sync_range function static (Harry, Jani)
> > > v2:
> > > * Change vmin and vmax to use u8 (Ville)
> > > * Dont store pixel clock since that is just a max dotclock
> > > and not related to VRR mode (Manasi)
> > >
> > > Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Cc: Harry Wentland <harry.wentland@amd.com>
> > > Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
> > > Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@amd.com>
> > > Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
> > > ---
> > > drivers/gpu/drm/drm_edid.c | 44 +++++++++++++++++++++++++++++++++++++
> > > include/drm/drm_connector.h | 22 +++++++++++++++++++
> > > 2 files changed, 66 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > > index ad41764a4ebe..e3f152180b6b 100644
> > > --- a/drivers/gpu/drm/drm_edid.c
> > > +++ b/drivers/gpu/drm/drm_edid.c
> > > @@ -4938,6 +4938,47 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
> > > }
> > > }
> > >
> > > +static
> > > +void get_adaptive_sync_range(struct detailed_timing *timing,
> > > + void *info_adaptive_sync)
> > > +{
> > > + struct drm_adaptive_sync_info *adaptive_sync = info_adaptive_sync;
> > > + const struct detailed_non_pixel *data = &timing->data.other_data;
> > > + const struct detailed_data_monitor_range *range = &data->data.range;
> > > +
> > > + if (data->type != EDID_DETAIL_MONITOR_RANGE)a
> >
> > is_display_descriptor()
>
> Will change to use is_display_descriptor()
>
> >
> > > + return;
> > > +
> > > + /*
> > > + * Check for flag range limits only. If flag == 1 then
> > > + * no additional timing information provided.
> > > + * Default GTF, GTF Secondary curve and CVT are not
> > > + * supported
> > > + */
> > > + if (range->flags != 1)
> >
> > Pls name the flags.
>
> I dont see that we have any enum with the flag names, do you want me to define them looking
> at EDID spec?
What else?
--
Ville Syrjälä
Intel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-03-04 18:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-03 0:08 [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits Manasi Navare
2020-03-03 13:42 ` Ville Syrjälä
2020-03-04 17:36 ` Manasi Navare
2020-03-04 18:31 ` Ville Syrjälä
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).