* [PATCH v1 1/3] drm/tegra: dc: Use devm_platform_ioremap_resource
@ 2020-03-08 22:38 Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 2/3] drm/tegra: dc: Release PM and RGB output when client's registration fails Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error Dmitry Osipenko
0 siblings, 2 replies; 5+ messages in thread
From: Dmitry Osipenko @ 2020-03-08 22:38 UTC (permalink / raw)
To: Thierry Reding; +Cc: linux-tegra, dri-devel
The devm_platform_ioremap_resource() helper replaces few lines of a
boilerplate code with a single line, making code to look cleaner a tad.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/gpu/drm/tegra/dc.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 7c70fd31a4c2..257163dda301 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -2503,7 +2503,6 @@ static int tegra_dc_couple(struct tegra_dc *dc)
static int tegra_dc_probe(struct platform_device *pdev)
{
- struct resource *regs;
struct tegra_dc *dc;
int err;
@@ -2560,8 +2559,7 @@ static int tegra_dc_probe(struct platform_device *pdev)
tegra_powergate_power_off(dc->powergate);
}
- regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- dc->regs = devm_ioremap_resource(&pdev->dev, regs);
+ dc->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(dc->regs))
return PTR_ERR(dc->regs);
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v1 2/3] drm/tegra: dc: Release PM and RGB output when client's registration fails
2020-03-08 22:38 [PATCH v1 1/3] drm/tegra: dc: Use devm_platform_ioremap_resource Dmitry Osipenko
@ 2020-03-08 22:38 ` Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error Dmitry Osipenko
1 sibling, 0 replies; 5+ messages in thread
From: Dmitry Osipenko @ 2020-03-08 22:38 UTC (permalink / raw)
To: Thierry Reding; +Cc: linux-tegra, dri-devel
Runtime PM and RGB output need to be released when host1x client
registration fails. The releasing is missed in the code, let's correct it.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/gpu/drm/tegra/dc.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 257163dda301..56d933e81797 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -2586,10 +2586,16 @@ static int tegra_dc_probe(struct platform_device *pdev)
if (err < 0) {
dev_err(&pdev->dev, "failed to register host1x client: %d\n",
err);
- return err;
+ goto disable_pm;
}
return 0;
+
+disable_pm:
+ pm_runtime_disable(&pdev->dev);
+ tegra_dc_rgb_remove(dc);
+
+ return err;
}
static int tegra_dc_remove(struct platform_device *pdev)
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error
2020-03-08 22:38 [PATCH v1 1/3] drm/tegra: dc: Use devm_platform_ioremap_resource Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 2/3] drm/tegra: dc: Release PM and RGB output when client's registration fails Dmitry Osipenko
@ 2020-03-08 22:38 ` Dmitry Osipenko
2020-03-12 9:33 ` Thierry Reding
1 sibling, 1 reply; 5+ messages in thread
From: Dmitry Osipenko @ 2020-03-08 22:38 UTC (permalink / raw)
To: Thierry Reding; +Cc: linux-tegra, dri-devel
Driver fails to probe with -EPROBE_DEFER if display output isn't ready
yet. This produces a bit noisy error message in KMSG during kernel's boot
up on Tegra20 and Tegra30 because RGB output tends to be probed earlier
than a corresponding voltage regulator driver.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/gpu/drm/tegra/dc.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index 56d933e81797..d7f2c4654b6b 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -2571,7 +2571,11 @@ static int tegra_dc_probe(struct platform_device *pdev)
err = tegra_dc_rgb_probe(dc);
if (err < 0 && err != -ENODEV) {
- dev_err(&pdev->dev, "failed to probe RGB output: %d\n", err);
+ if (err == -EPROBE_DEFER)
+ dev_dbg(&pdev->dev, "RGB output probe deferred\n");
+ else
+ dev_err(&pdev->dev, "failed to probe RGB output: %d\n",
+ err);
return err;
}
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error
2020-03-08 22:38 ` [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error Dmitry Osipenko
@ 2020-03-12 9:33 ` Thierry Reding
2020-03-12 14:03 ` Dmitry Osipenko
0 siblings, 1 reply; 5+ messages in thread
From: Thierry Reding @ 2020-03-12 9:33 UTC (permalink / raw)
To: Dmitry Osipenko; +Cc: linux-tegra, dri-devel
[-- Attachment #1.1: Type: text/plain, Size: 1540 bytes --]
On Mon, Mar 09, 2020 at 01:38:09AM +0300, Dmitry Osipenko wrote:
> Driver fails to probe with -EPROBE_DEFER if display output isn't ready
> yet. This produces a bit noisy error message in KMSG during kernel's boot
> up on Tegra20 and Tegra30 because RGB output tends to be probed earlier
> than a corresponding voltage regulator driver.
>
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
> drivers/gpu/drm/tegra/dc.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
> index 56d933e81797..d7f2c4654b6b 100644
> --- a/drivers/gpu/drm/tegra/dc.c
> +++ b/drivers/gpu/drm/tegra/dc.c
> @@ -2571,7 +2571,11 @@ static int tegra_dc_probe(struct platform_device *pdev)
>
> err = tegra_dc_rgb_probe(dc);
> if (err < 0 && err != -ENODEV) {
> - dev_err(&pdev->dev, "failed to probe RGB output: %d\n", err);
> + if (err == -EPROBE_DEFER)
> + dev_dbg(&pdev->dev, "RGB output probe deferred\n");
> + else
> + dev_err(&pdev->dev, "failed to probe RGB output: %d\n",
> + err);
> return err;
> }
I'd prefer if we had just a single message and only differentiate on the
kernel message level, something more along these lines:
if (err < 0 && err != -ENODEV) {
const char *level = KERN_ERR;
if (err == -EPROBE_DEFER)
level = KERN_DEBUG;
dev_printk(level, dc->dev, "failed to probe RGB output: %d\n",
err);
return err;
}
Do you mind if I squash that into your patch?
Thierry
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 160 bytes --]
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error
2020-03-12 9:33 ` Thierry Reding
@ 2020-03-12 14:03 ` Dmitry Osipenko
0 siblings, 0 replies; 5+ messages in thread
From: Dmitry Osipenko @ 2020-03-12 14:03 UTC (permalink / raw)
To: Thierry Reding; +Cc: linux-tegra, dri-devel
12.03.2020 12:33, Thierry Reding пишет:
> On Mon, Mar 09, 2020 at 01:38:09AM +0300, Dmitry Osipenko wrote:
>> Driver fails to probe with -EPROBE_DEFER if display output isn't ready
>> yet. This produces a bit noisy error message in KMSG during kernel's boot
>> up on Tegra20 and Tegra30 because RGB output tends to be probed earlier
>> than a corresponding voltage regulator driver.
>>
>> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
>> ---
>> drivers/gpu/drm/tegra/dc.c | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
>> index 56d933e81797..d7f2c4654b6b 100644
>> --- a/drivers/gpu/drm/tegra/dc.c
>> +++ b/drivers/gpu/drm/tegra/dc.c
>> @@ -2571,7 +2571,11 @@ static int tegra_dc_probe(struct platform_device *pdev)
>>
>> err = tegra_dc_rgb_probe(dc);
>> if (err < 0 && err != -ENODEV) {
>> - dev_err(&pdev->dev, "failed to probe RGB output: %d\n", err);
>> + if (err == -EPROBE_DEFER)
>> + dev_dbg(&pdev->dev, "RGB output probe deferred\n");
>> + else
>> + dev_err(&pdev->dev, "failed to probe RGB output: %d\n",
>> + err);
>> return err;
>> }
>
> I'd prefer if we had just a single message and only differentiate on the
> kernel message level, something more along these lines:
>
> if (err < 0 && err != -ENODEV) {
> const char *level = KERN_ERR;
>
> if (err == -EPROBE_DEFER)
> level = KERN_DEBUG;
>
> dev_printk(level, dc->dev, "failed to probe RGB output: %d\n",
> err);
> return err;
> }
>
> Do you mind if I squash that into your patch?
I don't mind, thanks :)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-03-13 8:00 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-03-08 22:38 [PATCH v1 1/3] drm/tegra: dc: Use devm_platform_ioremap_resource Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 2/3] drm/tegra: dc: Release PM and RGB output when client's registration fails Dmitry Osipenko
2020-03-08 22:38 ` [PATCH v1 3/3] drm/tegra: dc: Silence RGB output deferred-probe error Dmitry Osipenko
2020-03-12 9:33 ` Thierry Reding
2020-03-12 14:03 ` Dmitry Osipenko
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).