Re: [PATCH v1 18/36] dt-bindings: display: convert raydium,rm67191 to DT Schema

[Rob Herring <robh@kernel.org>]

On Sun, Mar 15, 2020 at 02:43:58PM +0100, Sam Ravnborg wrote:
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Robert Chiras <robert.chiras@nxp.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/raydium,rm67191.txt         | 41 ----------
>  .../display/panel/raydium,rm67191.yaml        | 75 +++++++++++++++++++
>  2 files changed, 75 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> deleted file mode 100644
> index 10424695aa02..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> -
> -Required properties:
> -- compatible: 		"raydium,rm67191"
> -- reg:			virtual channel for MIPI-DSI protocol
> -			must be <0>
> -- dsi-lanes:		number of DSI lanes to be used
> -			must be <3> or <4>
> -- port: 		input port node with endpoint definition as
> -			defined in Documentation/devicetree/bindings/graph.txt;
> -			the input port should be connected to a MIPI-DSI device
> -			driver
> -
> -Optional properties:
> -- reset-gpios:		a GPIO spec for the RST_B GPIO pin
> -- v3p3-supply:		phandle to 3.3V regulator that powers the VDD_3V3 pin
> -- v1p8-supply:		phandle to 1.8V regulator that powers the VDD_1V8 pin
> -- width-mm:		see panel-common.txt
> -- height-mm:		see panel-common.txt
> -- video-mode:		0 - burst-mode
> -			1 - non-burst with sync event
> -			2 - non-burst with sync pulse
> -
> -Example:
> -
> -	panel@0 {
> -		compatible = "raydium,rm67191";
> -		reg = <0>;
> -		pinctrl-0 = <&pinctrl_mipi_dsi_0_1_en>;
> -		pinctrl-names = "default";
> -		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> -		dsi-lanes = <4>;
> -		width-mm = <68>;
> -		height-mm = <121>;
> -
> -		port {
> -			panel_in: endpoint {
> -				remote-endpoint = <&mipi_out>;
> -			};
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> new file mode 100644
> index 000000000000..b78b66a4336f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/raydium,rm67191.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
> +
> +maintainers:
> +  - Robert Chiras <robert.chiras@nxp.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: raydium,rm67191
> +
> +  reg: true
> +  port: true
> +  reset-gpios: true
> +  width-mm: true
> +  height-mm: true
> + 
> +  dsi-lanes:
> +    description: Number of DSI lanes to be used must be <3> or <4>
> +    enum: [3, 4]
> +
> +  v3p3-supply:
> +    description: phandle to 3.3V regulator that powers the VDD_3V3 pin
> +
> +  v1p8-supply:
> +    description: phandle to 1.8V regulator that powers the VDD_1V8 pin
> +
> +  video-mode:
> +    description: |
> +      0 - burst-mode
> +      1 - non-burst with sync event
> +      2 - non-burst with sync pulse
> +    enum: [0, 1, 2]
> +
> +required:
> +  - compatible
> +  - reg
> +  - dsi-lanes
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel {

panel@0

I thought our dsi bus binding would catch this...

> +            compatible = "raydium,rm67191";
> +            reg = <0>;
> +            reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
> +            dsi-lanes = <4>;
> +            width-mm = <68>;
> +            height-mm = <121>;
> +            video-mode = <1>;
> +
> +            port {
> +                panel_in: endpoint {
> +                    remote-endpoint = <&mipi_out>;
> +                };
> +            };
> +        };
> +    };
> +
> +...
> -- 
> 2.20.1
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel