From: Arnd Bergmann <arnd@arndb.de>
To: "Alex Deucher" <alexander.deucher@amd.com>,
"Christian König" <christian.koenig@amd.com>,
"David (ChunMing) Zhou" <David1.Zhou@amd.com>,
"David Airlie" <airlied@linux.ie>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Hawking Zhang" <Hawking.Zhang@amd.com>,
"John Clements" <john.clements@amd.com>
Cc: Arnd Bergmann <arnd@arndb.de>, Guchun Chen <guchun.chen@amd.com>,
Tao Zhou <tao.zhou1@amd.com>,
linux-kernel@vger.kernel.org, amd-gfx@lists.freedesktop.org,
dri-devel@lists.freedesktop.org, Dennis Li <Dennis.Li@amd.com>
Subject: [PATCH] drm/amdgpu: allocate large structures dynamically
Date: Tue, 5 May 2020 16:01:52 +0200 [thread overview]
Message-ID: <20200505140208.284473-1-arnd@arndb.de> (raw)
After the structure was padded to 1024 bytes, it is no longer
suitable for being a local variable, as the function surpasses
the warning limit for 32-bit architectures:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:587:5: error: stack frame size of 1072 bytes in function 'amdgpu_ras_feature_enable' [-Werror,-Wframe-larger-than=]
int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
^
Use kzalloc() instead to get it from the heap.
Fixes: a0d254820f43 ("drm/amdgpu: update RAS TA to Host interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c | 31 +++++++++++++++++--------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
index 538895cfd862..7348619253c7 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c
@@ -588,19 +588,23 @@ int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
struct ras_common_if *head, bool enable)
{
struct amdgpu_ras *con = amdgpu_ras_get_context(adev);
- union ta_ras_cmd_input info;
+ union ta_ras_cmd_input *info;
int ret;
if (!con)
return -EINVAL;
+ info = kzalloc(sizeof(union ta_ras_cmd_input), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
if (!enable) {
- info.disable_features = (struct ta_ras_disable_features_input) {
+ info->disable_features = (struct ta_ras_disable_features_input) {
.block_id = amdgpu_ras_block_to_ta(head->block),
.error_type = amdgpu_ras_error_to_ta(head->type),
};
} else {
- info.enable_features = (struct ta_ras_enable_features_input) {
+ info->enable_features = (struct ta_ras_enable_features_input) {
.block_id = amdgpu_ras_block_to_ta(head->block),
.error_type = amdgpu_ras_error_to_ta(head->type),
};
@@ -609,26 +613,33 @@ int amdgpu_ras_feature_enable(struct amdgpu_device *adev,
/* Do not enable if it is not allowed. */
WARN_ON(enable && !amdgpu_ras_is_feature_allowed(adev, head));
/* Are we alerady in that state we are going to set? */
- if (!(!!enable ^ !!amdgpu_ras_is_feature_enabled(adev, head)))
- return 0;
+ if (!(!!enable ^ !!amdgpu_ras_is_feature_enabled(adev, head))) {
+ ret = 0;
+ goto out;
+ }
if (!amdgpu_ras_intr_triggered()) {
- ret = psp_ras_enable_features(&adev->psp, &info, enable);
+ ret = psp_ras_enable_features(&adev->psp, info, enable);
if (ret) {
amdgpu_ras_parse_status_code(adev,
enable ? "enable":"disable",
ras_block_str(head->block),
(enum ta_ras_status)ret);
if (ret == TA_RAS_STATUS__RESET_NEEDED)
- return -EAGAIN;
- return -EINVAL;
+ ret = -EAGAIN;
+ else
+ ret = -EINVAL;
+
+ goto out;
}
}
/* setup the obj */
__amdgpu_ras_feature_enable(adev, head, enable);
-
- return 0;
+ ret = 0;
+out:
+ kfree(info);
+ return ret;
}
/* Only used in device probe stage and called only once. */
--
2.26.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2020-05-05 14:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-05 14:01 Arnd Bergmann [this message]
2020-05-05 14:07 ` [PATCH] drm/amdgpu: allocate large structures dynamically Christian König
2020-05-05 15:34 ` Alex Deucher
2020-05-06 19:01 ` Joe Perches
2020-05-07 6:42 ` Christian König
2020-05-07 6:55 ` Joe Perches
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200505140208.284473-1-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=David1.Zhou@amd.com \
--cc=Dennis.Li@amd.com \
--cc=Hawking.Zhang@amd.com \
--cc=airlied@linux.ie \
--cc=alexander.deucher@amd.com \
--cc=amd-gfx@lists.freedesktop.org \
--cc=christian.koenig@amd.com \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=guchun.chen@amd.com \
--cc=john.clements@amd.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tao.zhou1@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).