[PATCH v6 0/6] Support DRM bridges on NVIDIA Tegra

[PATCH v6 0/6] Support DRM bridges on NVIDIA Tegra

[Dmitry Osipenko]

Hello,

This series adds initial support for the DRM bridges to NVIDIA Tegra DRM
driver. This is required by newer device-trees where we model the LVDS
encoder bridge properly.

Changelog:

v6: - Added r-b and acks from Rob Herring and Sam Ravnborg.

    - Rebased on a recent linux-next, patches now apply without fuzz.

v5: - Added new patches that make drm_of_find_panel_or_bridge() more usable
      if graph isn't defined in a device-tree:

        of_graph: add of_graph_get_local_port()
        drm/of: Make drm_of_find_panel_or_bridge() to check graph's presence

    - Updated "Support DRM bridges" patch to use drm_of_find_panel_or_bridge()
      directly and added WARN_ON(output->panel || output->bridge) sanity-check.

    - Added new "Wrap directly-connected panel into DRM bridge" patch, as
      was suggested by Laurent Pinchart.

v4: - Following review comments that were made by Laurent Pinchart to the v3,
      we now create and use the "bridge connector".

v3: - Following recommendation from Sam Ravnborg, the new bridge attachment
      model is now being used, i.e. we ask bridge to *not* create a connector
      using the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.

    - The bridge is now created only for the RGB (LVDS) output, and only
      when necessary. For now we don't need bridges for HDMI or DSI outputs.

    - I noticed that we're leaking OF node in the panel's error code path,
      this is fixed now by the new patch "Don't leak OF node on error".

v2: - Added the new "rgb: Don't register connector if bridge is used"
      patch, which hides the unused connector provided by the Tegra DRM
      driver when bridge is used, since bridge provides its own connector
      to us.

Dmitry Osipenko (6):
  of_graph: add of_graph_get_local_port()
  drm/of: Make drm_of_find_panel_or_bridge() to check graph's presence
  drm/tegra: output: Don't leak OF node on error
  drm/tegra: output: Support DRM bridges
  drm/tegra: output: rgb: Support LVDS encoder bridge
  drm/tegra: output: rgb: Wrap directly-connected panel into DRM bridge

 drivers/gpu/drm/drm_of.c       | 13 +++++-
 drivers/gpu/drm/tegra/drm.h    |  2 +
 drivers/gpu/drm/tegra/output.c | 21 +++++++--
 drivers/gpu/drm/tegra/rgb.c    | 85 +++++++++++++++++++++-------------
 drivers/of/property.c          | 32 +++++++++----
 include/linux/of_graph.h       |  7 +++
 6 files changed, 114 insertions(+), 46 deletions(-)

-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 1/6] of_graph: add of_graph_get_local_port()

[Dmitry Osipenko]

In some case, like a DRM display code for example, it's useful to silently
check whether port node exists at all in a device-tree before proceeding
with parsing the graph.

This patch adds of_graph_get_local_port() which returns pointer to a local
port node, or NULL if graph isn't specified in a device-tree for a given
device node.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/of/property.c    | 32 +++++++++++++++++++++++---------
 include/linux/of_graph.h |  7 +++++++
 2 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/drivers/of/property.c b/drivers/of/property.c
index 1f2086f4e7ce..05c5f619b8bb 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -608,15 +608,7 @@ struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 	 * parent port node.
 	 */
 	if (!prev) {
-		struct device_node *node;
-
-		node = of_get_child_by_name(parent, "ports");
-		if (node)
-			parent = node;
-
-		port = of_get_child_by_name(parent, "port");
-		of_node_put(node);
-
+		port = of_graph_get_local_port(parent);
 		if (!port) {
 			pr_err("graph: no port node found in %pOF\n", parent);
 			return NULL;
@@ -765,6 +757,28 @@ struct device_node *of_graph_get_remote_port(const struct device_node *node)
 }
 EXPORT_SYMBOL(of_graph_get_remote_port);
 
+/**
+ * of_graph_get_local_port() - get local port node
+ * @node: pointer to a local endpoint device_node
+ *
+ * Return: First local port node associated with local endpoint node linked
+ *	   to @node. Use of_node_put() on it when done.
+ */
+struct device_node *of_graph_get_local_port(const struct device_node *node)
+{
+	struct device_node *ports, *port;
+
+	ports = of_get_child_by_name(node, "ports");
+	if (ports)
+		node = ports;
+
+	port = of_get_child_by_name(node, "port");
+	of_node_put(ports);
+
+	return port;
+}
+EXPORT_SYMBOL(of_graph_get_local_port);
+
 int of_graph_get_endpoint_count(const struct device_node *np)
 {
 	struct device_node *endpoint;
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index 01038a6aade0..1fdeb72c7765 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -54,6 +54,7 @@ struct device_node *of_graph_get_remote_port_parent(
 struct device_node *of_graph_get_remote_port(const struct device_node *node);
 struct device_node *of_graph_get_remote_node(const struct device_node *node,
 					     u32 port, u32 endpoint);
+struct device_node *of_graph_get_local_port(const struct device_node *node);
 #else
 
 static inline int of_graph_parse_endpoint(const struct device_node *node,
@@ -116,6 +117,12 @@ static inline struct device_node *of_graph_get_remote_node(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_local_port(
+					const struct device_node *node)
+{
+	return NULL;
+}
+
 #endif /* CONFIG_OF */
 
 #endif /* __LINUX_OF_GRAPH_H */
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 2/6] drm/of: Make drm_of_find_panel_or_bridge() to check graph's presence

[Dmitry Osipenko]

When graph isn't defined in a device-tree, the of_graph_get_remote_node()
prints a noisy error message, telling that port node is not found. This is
undesirable behaviour in our case because absence of a panel/bridge graph
is a valid case. Let's check presence of the local port in a device-tree
before proceeding with parsing the graph.

Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/drm_of.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_of.c b/drivers/gpu/drm/drm_of.c
index b50b44e76279..e0652c38f357 100644
--- a/drivers/gpu/drm/drm_of.c
+++ b/drivers/gpu/drm/drm_of.c
@@ -239,13 +239,24 @@ int drm_of_find_panel_or_bridge(const struct device_node *np,
 				struct drm_bridge **bridge)
 {
 	int ret = -EPROBE_DEFER;
-	struct device_node *remote;
+	struct device_node *local, *remote;
 
 	if (!panel && !bridge)
 		return -EINVAL;
 	if (panel)
 		*panel = NULL;
 
+	/*
+	 * of_graph_get_remote_node() produces a noisy error message if port
+	 * node isn't found and the absence of the port is a legit case here,
+	 * so at first we silently check presence of the local port.
+	 */
+	local = of_graph_get_local_port(np);
+	if (!local)
+		return -ENODEV;
+
+	of_node_put(local);
+
 	remote = of_graph_get_remote_node(np, port, endpoint);
 	if (!remote)
 		return -ENODEV;
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 3/6] drm/tegra: output: Don't leak OF node on error

[Dmitry Osipenko]

The OF node should be put before returning error in tegra_output_probe(),
otherwise node's refcount will be leaked.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/tegra/output.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index e36e5e7c2f69..a6a711d54e88 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -102,10 +102,10 @@ int tegra_output_probe(struct tegra_output *output)
 	panel = of_parse_phandle(output->of_node, "nvidia,panel", 0);
 	if (panel) {
 		output->panel = of_drm_find_panel(panel);
+		of_node_put(panel);
+
 		if (IS_ERR(output->panel))
 			return PTR_ERR(output->panel);
-
-		of_node_put(panel);
 	}
 
 	output->edid = of_get_property(output->of_node, "nvidia,edid", &size);
@@ -113,13 +113,12 @@ int tegra_output_probe(struct tegra_output *output)
 	ddc = of_parse_phandle(output->of_node, "nvidia,ddc-i2c-bus", 0);
 	if (ddc) {
 		output->ddc = of_find_i2c_adapter_by_node(ddc);
+		of_node_put(ddc);
+
 		if (!output->ddc) {
 			err = -EPROBE_DEFER;
-			of_node_put(ddc);
 			return err;
 		}
-
-		of_node_put(ddc);
 	}
 
 	output->hpd_gpio = devm_gpiod_get_from_of_node(output->dev,
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 4/6] drm/tegra: output: Support DRM bridges

[Dmitry Osipenko]

Newer Tegra device-trees will specify a video output graph which involves
a bridge. This patch adds initial support for the DRM bridges to the Tegra
DRM output.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/tegra/drm.h    |  2 ++
 drivers/gpu/drm/tegra/output.c | 12 ++++++++++++
 2 files changed, 14 insertions(+)

diff --git a/drivers/gpu/drm/tegra/drm.h b/drivers/gpu/drm/tegra/drm.h
index b25443255be6..f38de08e0c95 100644
--- a/drivers/gpu/drm/tegra/drm.h
+++ b/drivers/gpu/drm/tegra/drm.h
@@ -12,6 +12,7 @@
 #include <linux/gpio/consumer.h>
 
 #include <drm/drm_atomic.h>
+#include <drm/drm_bridge.h>
 #include <drm/drm_edid.h>
 #include <drm/drm_encoder.h>
 #include <drm/drm_fb_helper.h>
@@ -116,6 +117,7 @@ struct tegra_output {
 	struct device_node *of_node;
 	struct device *dev;
 
+	struct drm_bridge *bridge;
 	struct drm_panel *panel;
 	struct i2c_adapter *ddc;
 	const struct edid *edid;
diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
index a6a711d54e88..ccd1421f1b24 100644
--- a/drivers/gpu/drm/tegra/output.c
+++ b/drivers/gpu/drm/tegra/output.c
@@ -5,6 +5,7 @@
  */
 
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_of.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_simple_kms_helper.h>
 
@@ -99,8 +100,19 @@ int tegra_output_probe(struct tegra_output *output)
 	if (!output->of_node)
 		output->of_node = output->dev->of_node;
 
+	err = drm_of_find_panel_or_bridge(output->of_node, -1, -1,
+					  &output->panel, &output->bridge);
+	if (err && err != -ENODEV)
+		return err;
+
 	panel = of_parse_phandle(output->of_node, "nvidia,panel", 0);
 	if (panel) {
+		/*
+		 * Don't mix nvidia,panel phandle with the graph in a
+		 * device-tree.
+		 */
+		WARN_ON(output->panel || output->bridge);
+
 		output->panel = of_drm_find_panel(panel);
 		of_node_put(panel);
 
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 5/6] drm/tegra: output: rgb: Support LVDS encoder bridge

[Dmitry Osipenko]

Newer Tegra device-trees will specify a video output graph, which involves
LVDS encoder bridge. This patch adds support for the LVDS encoder bridge
to the RGB output, allowing us to model the display hardware properly.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/tegra/rgb.c | 58 +++++++++++++++++++++++++++++++------
 1 file changed, 49 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
index 0562a7eb793f..9a7024ec96bc 100644
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -7,6 +7,7 @@
 #include <linux/clk.h>
 
 #include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge_connector.h>
 #include <drm/drm_panel.h>
 #include <drm/drm_simple_kms_helper.h>
 
@@ -267,24 +268,63 @@ int tegra_dc_rgb_remove(struct tegra_dc *dc)
 int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
 {
 	struct tegra_output *output = dc->rgb;
+	struct drm_connector *connector;
 	int err;
 
 	if (!dc->rgb)
 		return -ENODEV;
 
-	drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs,
-			   DRM_MODE_CONNECTOR_LVDS);
-	drm_connector_helper_add(&output->connector,
-				 &tegra_rgb_connector_helper_funcs);
-	output->connector.dpms = DRM_MODE_DPMS_OFF;
-
 	drm_simple_encoder_init(drm, &output->encoder, DRM_MODE_ENCODER_LVDS);
 	drm_encoder_helper_add(&output->encoder,
 			       &tegra_rgb_encoder_helper_funcs);
 
-	drm_connector_attach_encoder(&output->connector,
-					  &output->encoder);
-	drm_connector_register(&output->connector);
+	/*
+	 * Tegra devices that have LVDS panel utilize LVDS encoder bridge
+	 * for converting up to 28 LCD LVTTL lanes into 5/4 LVDS lanes that
+	 * go to display panel's receiver.
+	 *
+	 * Encoder usually have a power-down control which needs to be enabled
+	 * in order to transmit data to the panel.  Historically devices that
+	 * use an older device-tree version didn't model the bridge, assuming
+	 * that encoder is turned ON by default, while today's DRM allows us
+	 * to model LVDS encoder properly.
+	 *
+	 * Newer device-trees utilize LVDS encoder bridge, which provides
+	 * us with a connector and handles the display panel.
+	 *
+	 * For older device-trees we fall back to our own connector and use
+	 * nvidia,panel phandle.
+	 */
+	if (output->bridge) {
+		err = drm_bridge_attach(&output->encoder, output->bridge,
+					NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+		if (err) {
+			dev_err(output->dev, "failed to attach bridge: %d\n",
+				err);
+			return err;
+		}
+
+		connector = drm_bridge_connector_init(drm, &output->encoder);
+		if (IS_ERR(connector)) {
+			dev_err(output->dev,
+				"failed to initialize bridge connector: %pe\n",
+				connector);
+			return PTR_ERR(connector);
+		}
+
+		drm_connector_attach_encoder(connector, &output->encoder);
+	} else {
+		drm_connector_init(drm, &output->connector,
+				   &tegra_rgb_connector_funcs,
+				   DRM_MODE_CONNECTOR_LVDS);
+		drm_connector_helper_add(&output->connector,
+					 &tegra_rgb_connector_helper_funcs);
+		output->connector.dpms = DRM_MODE_DPMS_OFF;
+
+		drm_connector_attach_encoder(&output->connector,
+					     &output->encoder);
+		drm_connector_register(&output->connector);
+	}
 
 	err = tegra_output_init(drm, output);
 	if (err < 0) {
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v6 6/6] drm/tegra: output: rgb: Wrap directly-connected panel into DRM bridge

[Dmitry Osipenko]

Currently Tegra DRM driver manually manages display panel, but this
management could be moved out into DRM core if we'll wrap panel into
DRM bridge. This patch wraps RGB panel into a DRM bridge and removes
manual handling of the panel from the RGB output code.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 drivers/gpu/drm/tegra/rgb.c | 53 +++++++++++++------------------------
 1 file changed, 18 insertions(+), 35 deletions(-)

diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
index 9a7024ec96bc..a4c5a6066c54 100644
--- a/drivers/gpu/drm/tegra/rgb.c
+++ b/drivers/gpu/drm/tegra/rgb.c
@@ -8,7 +8,6 @@
 
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_bridge_connector.h>
-#include <drm/drm_panel.h>
 #include <drm/drm_simple_kms_helper.h>
 
 #include "drm.h"
@@ -86,15 +85,6 @@ static void tegra_dc_write_regs(struct tegra_dc *dc,
 		tegra_dc_writel(dc, table[i].value, table[i].offset);
 }
 
-static const struct drm_connector_funcs tegra_rgb_connector_funcs = {
-	.reset = drm_atomic_helper_connector_reset,
-	.detect = tegra_output_connector_detect,
-	.fill_modes = drm_helper_probe_single_connector_modes,
-	.destroy = tegra_output_connector_destroy,
-	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
-	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
-};
-
 static enum drm_mode_status
 tegra_rgb_connector_mode_valid(struct drm_connector *connector,
 			       struct drm_display_mode *mode)
@@ -117,14 +107,8 @@ static void tegra_rgb_encoder_disable(struct drm_encoder *encoder)
 	struct tegra_output *output = encoder_to_output(encoder);
 	struct tegra_rgb *rgb = to_rgb(output);
 
-	if (output->panel)
-		drm_panel_disable(output->panel);
-
 	tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable));
 	tegra_dc_commit(rgb->dc);
-
-	if (output->panel)
-		drm_panel_unprepare(output->panel);
 }
 
 static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
@@ -133,9 +117,6 @@ static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
 	struct tegra_rgb *rgb = to_rgb(output);
 	u32 value;
 
-	if (output->panel)
-		drm_panel_prepare(output->panel);
-
 	tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable));
 
 	value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL;
@@ -157,9 +138,6 @@ static void tegra_rgb_encoder_enable(struct drm_encoder *encoder)
 	tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS);
 
 	tegra_dc_commit(rgb->dc);
-
-	if (output->panel)
-		drm_panel_enable(output->panel);
 }
 
 static int
@@ -278,6 +256,23 @@ int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
 	drm_encoder_helper_add(&output->encoder,
 			       &tegra_rgb_encoder_helper_funcs);
 
+	/*
+	 * Wrap directly-connected panel into DRM bridge in order to let
+	 * DRM core to handle panel for us.
+	 */
+	if (output->panel) {
+		output->bridge = devm_drm_panel_bridge_add(output->dev,
+							   output->panel);
+		if (IS_ERR(output->bridge)) {
+			dev_err(output->dev,
+				"failed to wrap panel into bridge: %pe\n",
+				output->bridge);
+			return PTR_ERR(output->bridge);
+		}
+
+		output->panel = NULL;
+	}
+
 	/*
 	 * Tegra devices that have LVDS panel utilize LVDS encoder bridge
 	 * for converting up to 28 LCD LVTTL lanes into 5/4 LVDS lanes that
@@ -292,8 +287,7 @@ int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
 	 * Newer device-trees utilize LVDS encoder bridge, which provides
 	 * us with a connector and handles the display panel.
 	 *
-	 * For older device-trees we fall back to our own connector and use
-	 * nvidia,panel phandle.
+	 * For older device-trees we wrapped panel into the panel-bridge.
 	 */
 	if (output->bridge) {
 		err = drm_bridge_attach(&output->encoder, output->bridge,
@@ -313,17 +307,6 @@ int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc)
 		}
 
 		drm_connector_attach_encoder(connector, &output->encoder);
-	} else {
-		drm_connector_init(drm, &output->connector,
-				   &tegra_rgb_connector_funcs,
-				   DRM_MODE_CONNECTOR_LVDS);
-		drm_connector_helper_add(&output->connector,
-					 &tegra_rgb_connector_helper_funcs);
-		output->connector.dpms = DRM_MODE_DPMS_OFF;
-
-		drm_connector_attach_encoder(&output->connector,
-					     &output->encoder);
-		drm_connector_register(&output->connector);
 	}
 
 	err = tegra_output_init(drm, output);
-- 
2.26.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 6/6] drm/tegra: output: rgb: Wrap directly-connected panel into DRM bridge

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2558 bytes --]

Hi Dmitry,

I love your patch! Perhaps something to improve:

[auto build test WARNING on linus/master]
[also build test WARNING on next-20200612]
[cannot apply to tegra/for-next robh/for-next v5.7]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Dmitry-Osipenko/Support-DRM-bridges-on-NVIDIA-Tegra/20200609-213026
base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git abfbb29297c27e3f101f348dc9e467b0fe70f919
config: arm64-randconfig-r026-20200612 (attached as .config)
compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 3b43f006294971b8049d4807110032169780e5b8)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install arm64 cross compiling tool for clang build
        # apt-get install binutils-aarch64-linux-gnu
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>, old ones prefixed by <<):

>> drivers/gpu/drm/tegra/rgb.c:100:48: warning: unused variable 'tegra_rgb_connector_helper_funcs' [-Wunused-const-variable]
static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = {
^
1 warning generated.

vim +/tegra_rgb_connector_helper_funcs +100 drivers/gpu/drm/tegra/rgb.c

3b0e58554873d1 Thierry Reding 2014-12-16   99  
3b0e58554873d1 Thierry Reding 2014-12-16 @100  static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = {
3b0e58554873d1 Thierry Reding 2014-12-16  101  	.get_modes = tegra_output_connector_get_modes,
3b0e58554873d1 Thierry Reding 2014-12-16  102  	.mode_valid = tegra_rgb_connector_mode_valid,
3b0e58554873d1 Thierry Reding 2014-12-16  103  };
3b0e58554873d1 Thierry Reding 2014-12-16  104  

:::::: The code at line 100 was first introduced by commit
:::::: 3b0e58554873d1034beef737f15c7aa46492ff98 drm/tegra: rgb: Demidlayer

:::::: TO: Thierry Reding <treding@nvidia.com>
:::::: CC: Thierry Reding <treding@nvidia.com>

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 43294 bytes --]

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v6 6/6] drm/tegra: output: rgb: Wrap directly-connected panel into DRM bridge

[Dmitry Osipenko]

13.06.2020 00:23, kernel test robot пишет:
> Hi Dmitry,
> 
> I love your patch! Perhaps something to improve:
> 
> [auto build test WARNING on linus/master]
> [also build test WARNING on next-20200612]
> [cannot apply to tegra/for-next robh/for-next v5.7]
> [if your patch is applied to the wrong git tree, please drop us a note to help
> improve the system. BTW, we also suggest to use '--base' option to specify the
> base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
> 
> url:    https://github.com/0day-ci/linux/commits/Dmitry-Osipenko/Support-DRM-bridges-on-NVIDIA-Tegra/20200609-213026
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git abfbb29297c27e3f101f348dc9e467b0fe70f919
> config: arm64-randconfig-r026-20200612 (attached as .config)
> compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project 3b43f006294971b8049d4807110032169780e5b8)

Interestingly, GCC doesn't report this warning.

> reproduce (this is a W=1 build):
>         wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
>         chmod +x ~/bin/make.cross
>         # install arm64 cross compiling tool for clang build
>         # apt-get install binutils-aarch64-linux-gnu
>         # save the attached .config to linux build tree
>         COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=arm64 
> 
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
> 
> All warnings (new ones prefixed by >>, old ones prefixed by <<):
> 
>>> drivers/gpu/drm/tegra/rgb.c:100:48: warning: unused variable 'tegra_rgb_connector_helper_funcs' [-Wunused-const-variable]
> static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = {
> ^
> 1 warning generated.


There are two unused structs in the code and one is referenced by the
other, I'll remove the unused structs in v7.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel