* [PATCH v1] arm64: dts: qcom: sc7180: Add Display Port dt node
@ 2020-06-16 0:22 Tanmay Shah
0 siblings, 0 replies; only message in thread
From: Tanmay Shah @ 2020-06-16 0:22 UTC (permalink / raw)
To: swboyd
Cc: freedreno, linux-arm-msm, linux-kernel, dri-devel, seanpaul,
abhinavk, aravindh, sam
Enable DP driver for sc7180.
This change depends-on following series:
https://patchwork.freedesktop.org/series/78247/
and https://patchwork.freedesktop.org/patch/351990/
Signed-off-by: Tanmay Shah <tanmay@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 58 ++++++++++++++++++++++++++--
1 file changed, 54 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101ad623..989960d2200b 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1557,10 +1557,19 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
+ port@1 {
+ reg = <1>;
+ dpu_intf1_out: endpoint {
+ remote-endpoint =
+ <&dsi0_in>;
+ };
+ };
+
port@0 {
reg = <0>;
- dpu_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ dpu_intf0_out: endpoint {
+ remote-endpoint =
+ <&dp_in>;
};
};
};
@@ -1634,6 +1643,47 @@ dsi_phy: dsi-phy@ae94400 {
};
};
+ msm_dp: displayport-controller@ae90000{
+ status = "ok";
+ cell-index = <0>;
+ compatible = "qcom,dp-display";
+
+ reg = <0 0xae90000 0 0x1400>;
+ reg-names = "dp_controller";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <12 0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+ <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+ clock-names = "core_aux", "ctrl_link",
+ "ctrl_link_iface", "stream_pixel",
+ "pixel_rcg";
+ #clock-cells = <1>;
+
+ data-lanes = <0 1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ dp_in: endpoint {
+ remote-endpoint =
+ <&dpu_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dp_out: endpoint { };
+ };
+ };
+ };
+
dispcc: clock-controller@af00000 {
compatible = "qcom,sc7180-dispcc";
reg = <0 0x0af00000 0 0x200000>;
@@ -1641,8 +1691,8 @@ dispcc: clock-controller@af00000 {
<&gcc GCC_DISP_GPLL0_CLK_SRC>,
<&dsi_phy 0>,
<&dsi_phy 1>,
- <0>,
- <0>;
+ <&msm_dp 0>,
+ <&msm_dp 1>;
clock-names = "bi_tcxo",
"gcc_disp_gpll0_clk_src",
"dsi0_phy_pll_out_byteclk",
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2020-06-16 0:22 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-16 0:22 [PATCH v1] arm64: dts: qcom: sc7180: Add Display Port dt node Tanmay Shah
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).