dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors
@ 2020-06-26 20:37 Linus Walleij
  2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: Linus Walleij @ 2020-06-26 20:37 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, dri-devel; +Cc: Gyungoh Yoo

The SKY81452 backlight driver just obtains a GPIO (named "gpios"
in the device tree) drives it high and leaves it high until the
driver is removed.

Switch to use GPIO descriptors for this, simple and
straight-forward.

Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/video/backlight/sky81452-backlight.c   | 18 ++++--------------
 .../linux/platform_data/sky81452-backlight.h   |  6 ++++--
 2 files changed, 8 insertions(+), 16 deletions(-)

diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index 2355f00f5773..81d2c8f3ca50 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -8,12 +8,11 @@
 
 #include <linux/backlight.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/platform_data/sky81452-backlight.h>
@@ -182,7 +181,7 @@ static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
 	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
 	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
-	pdata->gpio_enable = of_get_gpio(np, 0);
+	pdata->gpiod_enable = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
 
 	ret = of_property_count_u32_elems(np, "led-sources");
 	if (ret < 0) {
@@ -264,15 +263,6 @@ static int sky81452_bl_probe(struct platform_device *pdev)
 			return PTR_ERR(pdata);
 	}
 
-	if (gpio_is_valid(pdata->gpio_enable)) {
-		ret = devm_gpio_request_one(dev, pdata->gpio_enable,
-					GPIOF_OUT_INIT_HIGH, "sky81452-en");
-		if (ret < 0) {
-			dev_err(dev, "failed to request GPIO. err=%d\n", ret);
-			return ret;
-		}
-	}
-
 	ret = sky81452_bl_init_device(regmap, pdata);
 	if (ret < 0) {
 		dev_err(dev, "failed to initialize. err=%d\n", ret);
@@ -312,8 +302,8 @@ static int sky81452_bl_remove(struct platform_device *pdev)
 	bd->props.brightness = 0;
 	backlight_update_status(bd);
 
-	if (gpio_is_valid(pdata->gpio_enable))
-		gpio_set_value_cansleep(pdata->gpio_enable, 0);
+	if (pdata->gpiod_enable)
+		gpiod_set_value_cansleep(pdata->gpiod_enable, 0);
 
 	return 0;
 }
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
index 02653d92d84f..d6f46670d923 100644
--- a/include/linux/platform_data/sky81452-backlight.h
+++ b/include/linux/platform_data/sky81452-backlight.h
@@ -9,11 +9,13 @@
 #ifndef _SKY81452_BACKLIGHT_H
 #define _SKY81452_BACKLIGHT_H
 
+#include <linux/gpio/consumer.h>
+
 /**
  * struct sky81452_platform_data
  * @name:	backlight driver name.
 		If it is not defined, default name is lcd-backlight.
- * @gpio_enable:GPIO number which control EN pin
+ * @gpios_enable:GPIO descriptor which control EN pin
  * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
  * @ignore_pwm:	true if DPWMI should be ignored.
  * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
@@ -23,7 +25,7 @@
  */
 struct sky81452_bl_platform_data {
 	const char *name;
-	int gpio_enable;
+	struct gpio_desc *gpiod_enable;
 	unsigned int enable;
 	bool ignore_pwm;
 	bool dpwm_mode;
-- 
2.25.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* [PATCH 2/2] backlight: sky81452: Privatize platform data
  2020-06-26 20:37 [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Linus Walleij
@ 2020-06-26 20:37 ` Linus Walleij
  2020-06-29 11:18   ` Daniel Thompson
  2020-07-01  9:40   ` Lee Jones
  2020-06-29 11:16 ` [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Daniel Thompson
  2020-07-01  9:39 ` Lee Jones
  2 siblings, 2 replies; 6+ messages in thread
From: Linus Walleij @ 2020-06-26 20:37 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, dri-devel; +Cc: Gyungoh Yoo

The only way the platform data for the SKY81452 ever gets populated
is through the device tree.

The MFD device is bothered with this for no reason at all. Just
allocate the platform data in the driver and be happy.

Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/mfd/sky81452.c                        |  2 -
 drivers/video/backlight/sky81452-backlight.c  | 34 +++++++++++++----
 include/linux/mfd/sky81452.h                  |  2 -
 .../linux/platform_data/sky81452-backlight.h  | 37 -------------------
 4 files changed, 27 insertions(+), 48 deletions(-)
 delete mode 100644 include/linux/platform_data/sky81452-backlight.h

diff --git a/drivers/mfd/sky81452.c b/drivers/mfd/sky81452.c
index 76eedfae8553..3ad35bf0c015 100644
--- a/drivers/mfd/sky81452.c
+++ b/drivers/mfd/sky81452.c
@@ -47,8 +47,6 @@ static int sky81452_probe(struct i2c_client *client,
 	memset(cells, 0, sizeof(cells));
 	cells[0].name = "sky81452-backlight";
 	cells[0].of_compatible = "skyworks,sky81452-backlight";
-	cells[0].platform_data = pdata->bl_pdata;
-	cells[0].pdata_size = sizeof(*pdata->bl_pdata);
 	cells[1].name = "sky81452-regulator";
 	cells[1].platform_data = pdata->regulator_init_data;
 	cells[1].pdata_size = sizeof(*pdata->regulator_init_data);
diff --git a/drivers/video/backlight/sky81452-backlight.c b/drivers/video/backlight/sky81452-backlight.c
index 81d2c8f3ca50..83ccb3d940fa 100644
--- a/drivers/video/backlight/sky81452-backlight.c
+++ b/drivers/video/backlight/sky81452-backlight.c
@@ -15,7 +15,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/platform_data/sky81452-backlight.h>
 #include <linux/slab.h>
 
 /* registers */
@@ -41,6 +40,29 @@
 #define SKY81452_DEFAULT_NAME "lcd-backlight"
 #define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
 
+/**
+ * struct sky81452_platform_data
+ * @name:	backlight driver name.
+		If it is not defined, default name is lcd-backlight.
+ * @gpios_enable:GPIO descriptor which control EN pin
+ * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
+ * @ignore_pwm:	true if DPWMI should be ignored.
+ * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
+ * @phase_shift:true is phase shift mode.
+ * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
+ * @boost_current_limit:	It should be one of 2300, 2750mA.
+ */
+struct sky81452_bl_platform_data {
+	const char *name;
+	struct gpio_desc *gpiod_enable;
+	unsigned int enable;
+	bool ignore_pwm;
+	bool dpwm_mode;
+	bool phase_shift;
+	unsigned int short_detection_threshold;
+	unsigned int boost_current_limit;
+};
+
 #define CTZ(b) __builtin_ctz(b)
 
 static int sky81452_bl_update_status(struct backlight_device *bd)
@@ -251,17 +273,15 @@ static int sky81452_bl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct regmap *regmap = dev_get_drvdata(dev->parent);
-	struct sky81452_bl_platform_data *pdata = dev_get_platdata(dev);
+	struct sky81452_bl_platform_data *pdata;
 	struct backlight_device *bd;
 	struct backlight_properties props;
 	const char *name;
 	int ret;
 
-	if (!pdata) {
-		pdata = sky81452_bl_parse_dt(dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
-	}
+	pdata = sky81452_bl_parse_dt(dev);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
 
 	ret = sky81452_bl_init_device(regmap, pdata);
 	if (ret < 0) {
diff --git a/include/linux/mfd/sky81452.h b/include/linux/mfd/sky81452.h
index d469aa481243..b08570ff34df 100644
--- a/include/linux/mfd/sky81452.h
+++ b/include/linux/mfd/sky81452.h
@@ -9,11 +9,9 @@
 #ifndef _SKY81452_H
 #define _SKY81452_H
 
-#include <linux/platform_data/sky81452-backlight.h>
 #include <linux/regulator/machine.h>
 
 struct sky81452_platform_data {
-	struct sky81452_bl_platform_data *bl_pdata;
 	struct regulator_init_data *regulator_init_data;
 };
 
diff --git a/include/linux/platform_data/sky81452-backlight.h b/include/linux/platform_data/sky81452-backlight.h
deleted file mode 100644
index d6f46670d923..000000000000
--- a/include/linux/platform_data/sky81452-backlight.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * sky81452.h	SKY81452 backlight driver
- *
- * Copyright 2014 Skyworks Solutions Inc.
- * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
- */
-
-#ifndef _SKY81452_BACKLIGHT_H
-#define _SKY81452_BACKLIGHT_H
-
-#include <linux/gpio/consumer.h>
-
-/**
- * struct sky81452_platform_data
- * @name:	backlight driver name.
-		If it is not defined, default name is lcd-backlight.
- * @gpios_enable:GPIO descriptor which control EN pin
- * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
- * @ignore_pwm:	true if DPWMI should be ignored.
- * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
- * @phase_shift:true is phase shift mode.
- * @short_detecion_threshold:	It should be one of 4, 5, 6 and 7V.
- * @boost_current_limit:	It should be one of 2300, 2750mA.
- */
-struct sky81452_bl_platform_data {
-	const char *name;
-	struct gpio_desc *gpiod_enable;
-	unsigned int enable;
-	bool ignore_pwm;
-	bool dpwm_mode;
-	bool phase_shift;
-	unsigned int short_detection_threshold;
-	unsigned int boost_current_limit;
-};
-
-#endif
-- 
2.25.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors
  2020-06-26 20:37 [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Linus Walleij
  2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
@ 2020-06-29 11:16 ` Daniel Thompson
  2020-07-01  9:39 ` Lee Jones
  2 siblings, 0 replies; 6+ messages in thread
From: Daniel Thompson @ 2020-06-29 11:16 UTC (permalink / raw)
  To: Linus Walleij; +Cc: Gyungoh Yoo, Jingoo Han, Lee Jones, dri-devel

On Fri, Jun 26, 2020 at 10:37:41PM +0200, Linus Walleij wrote:
> The SKY81452 backlight driver just obtains a GPIO (named "gpios"
> in the device tree) drives it high and leaves it high until the
> driver is removed.
> 
> Switch to use GPIO descriptors for this, simple and
> straight-forward.
> 
> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] backlight: sky81452: Privatize platform data
  2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
@ 2020-06-29 11:18   ` Daniel Thompson
  2020-07-01  9:40   ` Lee Jones
  1 sibling, 0 replies; 6+ messages in thread
From: Daniel Thompson @ 2020-06-29 11:18 UTC (permalink / raw)
  To: Linus Walleij; +Cc: Gyungoh Yoo, Jingoo Han, Lee Jones, dri-devel

On Fri, Jun 26, 2020 at 10:37:42PM +0200, Linus Walleij wrote:
> The only way the platform data for the SKY81452 ever gets populated
> is through the device tree.
> 
> The MFD device is bothered with this for no reason at all. Just
> allocate the platform data in the driver and be happy.
> 
> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors
  2020-06-26 20:37 [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Linus Walleij
  2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
  2020-06-29 11:16 ` [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Daniel Thompson
@ 2020-07-01  9:39 ` Lee Jones
  2 siblings, 0 replies; 6+ messages in thread
From: Lee Jones @ 2020-07-01  9:39 UTC (permalink / raw)
  To: Linus Walleij; +Cc: Jingoo Han, Daniel Thompson, Gyungoh Yoo, dri-devel

On Fri, 26 Jun 2020, Linus Walleij wrote:

> The SKY81452 backlight driver just obtains a GPIO (named "gpios"
> in the device tree) drives it high and leaves it high until the
> driver is removed.
> 
> Switch to use GPIO descriptors for this, simple and
> straight-forward.
> 
> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/video/backlight/sky81452-backlight.c   | 18 ++++--------------
>  .../linux/platform_data/sky81452-backlight.h   |  6 ++++--
>  2 files changed, 8 insertions(+), 16 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 2/2] backlight: sky81452: Privatize platform data
  2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
  2020-06-29 11:18   ` Daniel Thompson
@ 2020-07-01  9:40   ` Lee Jones
  1 sibling, 0 replies; 6+ messages in thread
From: Lee Jones @ 2020-07-01  9:40 UTC (permalink / raw)
  To: Linus Walleij; +Cc: Jingoo Han, Daniel Thompson, Gyungoh Yoo, dri-devel

On Fri, 26 Jun 2020, Linus Walleij wrote:

> The only way the platform data for the SKY81452 ever gets populated
> is through the device tree.
> 
> The MFD device is bothered with this for no reason at all. Just
> allocate the platform data in the driver and be happy.
> 
> Cc: Gyungoh Yoo <jack.yoo@skyworksinc.com>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  drivers/mfd/sky81452.c                        |  2 -
>  drivers/video/backlight/sky81452-backlight.c  | 34 +++++++++++++----
>  include/linux/mfd/sky81452.h                  |  2 -
>  .../linux/platform_data/sky81452-backlight.h  | 37 -------------------
>  4 files changed, 27 insertions(+), 48 deletions(-)
>  delete mode 100644 include/linux/platform_data/sky81452-backlight.h

Applied, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2020-07-01  9:40 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26 20:37 [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Linus Walleij
2020-06-26 20:37 ` [PATCH 2/2] backlight: sky81452: Privatize platform data Linus Walleij
2020-06-29 11:18   ` Daniel Thompson
2020-07-01  9:40   ` Lee Jones
2020-06-29 11:16 ` [PATCH 1/2] backlight: sky81452: Convert to GPIO descriptors Daniel Thompson
2020-07-01  9:39 ` Lee Jones

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).