dri-devel Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] backlight: Delete the OT200 backlight driver
@ 2020-06-26 10:25 Linus Walleij
  2020-06-26 11:10 ` Daniel Thompson
  2020-07-01  9:57 ` Lee Jones
  0 siblings, 2 replies; 3+ messages in thread
From: Linus Walleij @ 2020-06-26 10:25 UTC (permalink / raw)
  To: Lee Jones, Daniel Thompson, Jingoo Han, dri-devel

This driver has no in-kernel users. The device can only be populated
by board files since it does not support device tree nor ACPI,
and nothing in the kernel creates a device named "ot200-backlight".

This driver has been in the kernel since 2012. If it is used by
out-of-tree code that code should have been upstreamed by now,
it's been 8 years.

It uses the idiomatic forked GPIO of the CS5535 which combines
pin control and GPIO into its private custom interface, which
causes me a headache because that is not how we do things these
days: we creates separate pin control and GPIO drivers.

Delete this unused driver.

Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/video/backlight/Kconfig    |   7 --
 drivers/video/backlight/Makefile   |   1 -
 drivers/video/backlight/ot200_bl.c | 162 -----------------------------
 3 files changed, 170 deletions(-)
 delete mode 100644 drivers/video/backlight/ot200_bl.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 7d22d7377606..95c546cc8774 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -386,13 +386,6 @@ config BACKLIGHT_LP8788
 	help
 	  This supports TI LP8788 backlight driver.
 
-config BACKLIGHT_OT200
-	tristate "Backlight driver for ot200 visualisation device"
-	depends on CS5535_MFGPT && GPIO_CS5535
-	help
-	  To compile this driver as a module, choose M here: the module will be
-	  called ot200_bl.
-
 config BACKLIGHT_PANDORA
 	tristate "Backlight driver for Pandora console"
 	depends on TWL4030_CORE
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 0c1a1524627a..2072d21b60f7 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -45,7 +45,6 @@ obj-$(CONFIG_BACKLIGHT_LP8788)		+= lp8788_bl.o
 obj-$(CONFIG_BACKLIGHT_LV5207LP)	+= lv5207lp.o
 obj-$(CONFIG_BACKLIGHT_MAX8925)		+= max8925_bl.o
 obj-$(CONFIG_BACKLIGHT_OMAP1)		+= omap1_bl.o
-obj-$(CONFIG_BACKLIGHT_OT200)		+= ot200_bl.o
 obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
diff --git a/drivers/video/backlight/ot200_bl.c b/drivers/video/backlight/ot200_bl.c
deleted file mode 100644
index 23ee7106c72a..000000000000
--- a/drivers/video/backlight/ot200_bl.c
+++ /dev/null
@@ -1,162 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Bachmann electronic GmbH
- *	Christian Gmeiner <christian.gmeiner@gmail.com>
- *
- * Backlight driver for ot200 visualisation device from
- * Bachmann electronic GmbH.
- */
-
-#include <linux/module.h>
-#include <linux/fb.h>
-#include <linux/backlight.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/cs5535.h>
-
-static struct cs5535_mfgpt_timer *pwm_timer;
-
-/* this array defines the mapping of brightness in % to pwm frequency */
-static const u8 dim_table[101] = {0, 0, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2,
-				  2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 4, 4, 4, 4,
-				  4, 5, 5, 5, 5, 6, 6, 6, 7, 7, 7, 8, 8, 9, 9,
-				  10, 10, 11, 11, 12, 12, 13, 14, 15, 15, 16,
-				  17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 28,
-				  30, 31, 33, 35, 37, 39, 41, 43, 45, 47, 50,
-				  53, 55, 58, 61, 65, 68, 72, 75, 79, 84, 88,
-				  93, 97, 103, 108, 114, 120, 126, 133, 140,
-				  147, 155, 163};
-
-struct ot200_backlight_data {
-	int current_brightness;
-};
-
-#define GPIO_DIMM	27
-#define SCALE		1
-#define CMP1MODE	0x2	/* compare on GE; output high on compare
-				 * greater than or equal */
-#define PWM_SETUP	(SCALE | CMP1MODE << 6 | MFGPT_SETUP_CNTEN)
-#define MAX_COMP2	163
-
-static int ot200_backlight_update_status(struct backlight_device *bl)
-{
-	struct ot200_backlight_data *data = bl_get_data(bl);
-	int brightness = bl->props.brightness;
-
-	if (bl->props.state & BL_CORE_FBBLANK)
-		brightness = 0;
-
-	/* enable or disable PWM timer */
-	if (brightness == 0)
-		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, 0);
-	else if (data->current_brightness == 0) {
-		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0);
-		cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP,
-			MFGPT_SETUP_CNTEN);
-	}
-
-	/* apply new brightness value */
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1,
-		MAX_COMP2 - dim_table[brightness]);
-	data->current_brightness = brightness;
-
-	return 0;
-}
-
-static int ot200_backlight_get_brightness(struct backlight_device *bl)
-{
-	struct ot200_backlight_data *data = bl_get_data(bl);
-	return data->current_brightness;
-}
-
-static const struct backlight_ops ot200_backlight_ops = {
-	.update_status	= ot200_backlight_update_status,
-	.get_brightness	= ot200_backlight_get_brightness,
-};
-
-static int ot200_backlight_probe(struct platform_device *pdev)
-{
-	struct backlight_device *bl;
-	struct ot200_backlight_data *data;
-	struct backlight_properties props;
-	int retval = 0;
-
-	/* request gpio */
-	if (devm_gpio_request(&pdev->dev, GPIO_DIMM,
-				"ot200 backlight dimmer") < 0) {
-		dev_err(&pdev->dev, "failed to request GPIO %d\n", GPIO_DIMM);
-		return -ENODEV;
-	}
-
-	/* request timer */
-	pwm_timer = cs5535_mfgpt_alloc_timer(7, MFGPT_DOMAIN_ANY);
-	if (!pwm_timer) {
-		dev_err(&pdev->dev, "MFGPT 7 not available\n");
-		return -ENODEV;
-	}
-
-	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
-	if (!data) {
-		retval = -ENOMEM;
-		goto error_devm_kzalloc;
-	}
-
-	/* setup gpio */
-	cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_ENABLE);
-	cs5535_gpio_set(GPIO_DIMM, GPIO_OUTPUT_AUX1);
-
-	/* setup timer */
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1, 0);
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP2, MAX_COMP2);
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, PWM_SETUP);
-
-	data->current_brightness = 100;
-	props.max_brightness = 100;
-	props.brightness = 100;
-	props.type = BACKLIGHT_RAW;
-
-	bl = devm_backlight_device_register(&pdev->dev, dev_name(&pdev->dev),
-					&pdev->dev, data, &ot200_backlight_ops,
-					&props);
-	if (IS_ERR(bl)) {
-		dev_err(&pdev->dev, "failed to register backlight\n");
-		retval = PTR_ERR(bl);
-		goto error_devm_kzalloc;
-	}
-
-	platform_set_drvdata(pdev, bl);
-
-	return 0;
-
-error_devm_kzalloc:
-	cs5535_mfgpt_free_timer(pwm_timer);
-	return retval;
-}
-
-static int ot200_backlight_remove(struct platform_device *pdev)
-{
-	/* on module unload set brightness to 100% */
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_COUNTER, 0);
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
-	cs5535_mfgpt_write(pwm_timer, MFGPT_REG_CMP1,
-		MAX_COMP2 - dim_table[100]);
-
-	cs5535_mfgpt_free_timer(pwm_timer);
-
-	return 0;
-}
-
-static struct platform_driver ot200_backlight_driver = {
-	.driver		= {
-		.name	= "ot200-backlight",
-	},
-	.probe		= ot200_backlight_probe,
-	.remove		= ot200_backlight_remove,
-};
-
-module_platform_driver(ot200_backlight_driver);
-
-MODULE_DESCRIPTION("backlight driver for ot200 visualisation device");
-MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ot200-backlight");
-- 
2.25.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26 10:25 [PATCH] backlight: Delete the OT200 backlight driver Linus Walleij
2020-06-26 11:10 ` Daniel Thompson
2020-07-01  9:57 ` Lee Jones

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git