From: "Guido Günther" <agx@sigxcpu.org>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org,
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Arnd Bergmann <arnd@arndb.de>, David Airlie <airlied@linux.ie>,
Heiko Stuebner <heiko.stuebner@theobroma-systems.com>,
Daniel Palmer <daniel@0x0f.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Mark Brown <broonie@kernel.org>, allen <allen.chen@ite.com.tw>,
"David S. Miller" <davem@davemloft.net>
Subject: Re: [PATCH 3/3] drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel
Date: Sat, 15 Aug 2020 12:40:22 +0200 [thread overview]
Message-ID: <20200815104022.GA5641@bogon.m.sigxcpu.org> (raw)
In-Reply-To: <20200815100230.GA1002374@ravnborg.org>
Hi Sam,
On Sat, Aug 15, 2020 at 12:02:30PM +0200, Sam Ravnborg wrote:
> Hi Guido.
>
> > +static int mantix_probe(struct mipi_dsi_device *dsi)
> > +{
> > + struct device *dev = &dsi->dev;
> > + struct mantix *ctx;
> > + int ret;
> > +
> > + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
> > + if (!ctx)
> > + return -ENOMEM;
> > +
> > + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> > + if (IS_ERR(ctx->reset_gpio)) {
> > + DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
> > + return PTR_ERR(ctx->reset_gpio);
> > + }
> > +
> > + mipi_dsi_set_drvdata(dsi, ctx);
> > + ctx->dev = dev;
> > +
> > + dsi->lanes = 4;
> > + dsi->format = MIPI_DSI_FMT_RGB888;
> > + dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
> > + MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
> > +
> > + ctx->avdd = devm_regulator_get(dev, "avdd");
> > + if (IS_ERR(ctx->avdd)) {
> > + ret = PTR_ERR(ctx->avdd);
> > + if (ret != -EPROBE_DEFER)
> > + DRM_DEV_ERROR(dev,
> > + "Failed to request avdd regulator: %d\n",
> > + ret);
> > + return ret;
> > + }
>
> Consider to use the recently added dev_err_probe() here and below.
> Note: Not part of drm-misc-next yet - but hopefully after -rc1
> when a backmerge is done.
In fact I did decided against it since i was told that missing dev_* and
DRM_* logging shouldn't be done. So is that o.k. nowadays?
Cheers,
-- Guido
>
> Sam
>
> > + ctx->avee = devm_regulator_get(dev, "avee");
> > + if (IS_ERR(ctx->avee)) {
> > + ret = PTR_ERR(ctx->avee);
> > + if (ret != -EPROBE_DEFER)
> > + DRM_DEV_ERROR(dev,
> > + "Failed to request avee regulator: %d\n",
> > + ret);
> > + return ret;
> > + }
> > + ctx->vddi = devm_regulator_get(dev, "vddi");
> > + if (IS_ERR(ctx->vddi)) {
> > + ret = PTR_ERR(ctx->vddi);
> > + if (ret != -EPROBE_DEFER)
> > + DRM_DEV_ERROR(dev,
> > + "Failed to request vddi regulator: %d\n",
> > + ret);
> > + return ret;
> > + }
> > +
> > + drm_panel_init(&ctx->panel, dev, &mantix_drm_funcs,
> > + DRM_MODE_CONNECTOR_DSI);
> > +
> > + ret = drm_panel_of_backlight(&ctx->panel);
> > + if (ret)
> > + return ret;
> > + drm_panel_add(&ctx->panel);
> > +
> > + ret = mipi_dsi_attach(dsi);
> > + if (ret < 0) {
> > + DRM_DEV_ERROR(dev,
> > + "mipi_dsi_attach failed (%d). Is host ready?\n",
> > + ret);
> > + drm_panel_remove(&ctx->panel);
> > + return ret;
> > + }
> > +
> > + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
> > + default_mode.hdisplay, default_mode.vdisplay,
> > + drm_mode_vrefresh(&default_mode),
> > + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
> > +
> > + return 0;
> > +}
> > +
> > +static void mantix_shutdown(struct mipi_dsi_device *dsi)
> > +{
> > + struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + ret = drm_panel_unprepare(&ctx->panel);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
> > + ret);
> > +
> > + ret = drm_panel_disable(&ctx->panel);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
> > + ret);
> > +}
> > +
> > +static int mantix_remove(struct mipi_dsi_device *dsi)
> > +{
> > + struct mantix *ctx = mipi_dsi_get_drvdata(dsi);
> > + int ret;
> > +
> > + mantix_shutdown(dsi);
> > +
> > + ret = mipi_dsi_detach(dsi);
> > + if (ret < 0)
> > + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
> > + ret);
> > +
> > + drm_panel_remove(&ctx->panel);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id mantix_of_match[] = {
> > + { .compatible = "mantix,mlaf057we51-x" },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, mantix_of_match);
> > +
> > +static struct mipi_dsi_driver mantix_driver = {
> > + .probe = mantix_probe,
> > + .remove = mantix_remove,
> > + .shutdown = mantix_shutdown,
> > + .driver = {
> > + .name = DRV_NAME,
> > + .of_match_table = mantix_of_match,
> > + },
> > +};
> > +module_mipi_dsi_driver(mantix_driver);
> > +
> > +MODULE_AUTHOR("Guido Günther <agx@sigxcpu.org>");
> > +MODULE_DESCRIPTION("DRM driver for Mantix MLAF057WE51-X MIPI DSI panel");
> > +MODULE_LICENSE("GPL v2");
> > --
> > 2.26.2
> >
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel@lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-08-15 10:40 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-14 13:36 [PATCH 0/3] drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel Guido Günther
2020-08-14 13:36 ` [PATCH 1/3] dt-bindings: vendor-prefixes: Add mantix vendor prefix Guido Günther
2020-08-14 13:36 ` [PATCH 2/3] dt-bindings: Add Mantix MLAF057WE51-X panel bindings Guido Günther
2020-08-15 8:39 ` Sam Ravnborg
2020-08-15 16:47 ` Guido Günther
2020-08-15 21:08 ` Sam Ravnborg
2020-08-14 13:36 ` [PATCH 3/3] drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panel Guido Günther
2020-08-15 9:32 ` Sam Ravnborg
2020-08-15 21:28 ` Guido Günther
2020-08-15 10:02 ` Sam Ravnborg
2020-08-15 10:40 ` Guido Günther [this message]
2020-08-15 10:46 ` Sam Ravnborg
2020-08-15 12:55 ` Sam Ravnborg
2020-08-15 16:25 ` Guido Günther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200815104022.GA5641@bogon.m.sigxcpu.org \
--to=agx@sigxcpu.org \
--cc=airlied@linux.ie \
--cc=allen.chen@ite.com.tw \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=daniel@0x0f.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko.stuebner@theobroma-systems.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lkundrak@v3.sk \
--cc=mchehab+huawei@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).