From: Maxime Ripard <maxime@cerno.tech>
To: dri-devel@lists.freedesktop.org
Cc: Dom Cobley <popcornmix@gmail.com>,
Ryutaroh Matsumoto <ryutaroh@ict.e.titech.ac.jp>,
Lucas Nussbaum <lucas@debian.org>,
Maxime Ripard <maxime@cerno.tech>,
Dave Stevenson <dave.stevenson@raspberrypi.com>
Subject: [PATCH 2/2] drm/vc4: Correct POS1_SCL for hvs5
Date: Thu, 21 Jan 2021 11:57:59 +0100 [thread overview]
Message-ID: <20210121105759.1262699-2-maxime@cerno.tech> (raw)
In-Reply-To: <20210121105759.1262699-1-maxime@cerno.tech>
From: Dom Cobley <popcornmix@gmail.com>
Fixes failure with 4096x1080 resolutions
[ 284.315379] WARNING: CPU: 1 PID: 901 at drivers/gpu/drm/vc4/vc4_plane.c:981 vc4_plane_mode_set+0x1374/0x13c4
[ 284.315385] Modules linked in: ir_rc5_decoder rpivid_hevc(C) bcm2835_codec(C) bcm2835_isp(C) bcm2835_mmal_vchiq(C) bcm2835_gpiomem v4l2_mem2mem videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc cdc_acm xpad ir_rc6_decoder rc_rc6_mce gpio_ir_recv fuse
[ 284.315509] CPU: 1 PID: 901 Comm: kodi.bin Tainted: G C 5.10.7 #1
[ 284.315514] Hardware name: BCM2711
[ 284.315518] Backtrace:
[ 284.315533] [<c0cc5ca0>] (dump_backtrace) from [<c0cc6014>] (show_stack+0x20/0x24)
[ 284.315540] r7:ffffffff r6:00000000 r5:68000013 r4:c18ecf1c
[ 284.315549] [<c0cc5ff4>] (show_stack) from [<c0cca638>] (dump_stack+0xc4/0xf0)
[ 284.315558] [<c0cca574>] (dump_stack) from [<c022314c>] (__warn+0xfc/0x158)
[ 284.315564] r9:00000000 r8:00000009 r7:000003d5 r6:00000009 r5:c08cc7dc r4:c0fd09b8
[ 284.315572] [<c0223050>] (__warn) from [<c0cc67ec>] (warn_slowpath_fmt+0x74/0xe4)
[ 284.315577] r7:c08cc7dc r6:000003d5 r5:c0fd09b8 r4:00000000
[ 284.315584] [<c0cc677c>] (warn_slowpath_fmt) from [<c08cc7dc>] (vc4_plane_mode_set+0x1374/0x13c4)
[ 284.315589] r8:00000000 r7:00000000 r6:00001000 r5:c404c600 r4:c2e34600
[ 284.315596] [<c08cb468>] (vc4_plane_mode_set) from [<c08cc984>] (vc4_plane_atomic_check+0x40/0x1c0)
[ 284.315601] r10:00000001 r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0
[ 284.315605] r4:c2e34600
[ 284.315614] [<c08cc944>] (vc4_plane_atomic_check) from [<c0860504>] (drm_atomic_helper_check_planes+0xec/0x1ec)
[ 284.315620] r9:c2e34600 r8:c0e67068 r7:c0fc44e0 r6:c2ce3640 r5:c3d636c0 r4:00000006
[ 284.315627] [<c0860418>] (drm_atomic_helper_check_planes) from [<c0860658>] (drm_atomic_helper_check+0x54/0x9c)
[ 284.315633] r9:c2e35400 r8:00000006 r7:00000000 r6:c2ba7800 r5:c3d636c0 r4:00000000
[ 284.315641] [<c0860604>] (drm_atomic_helper_check) from [<c08b7ca8>] (vc4_atomic_check+0x25c/0x454)
[ 284.315645] r7:00000000 r6:c2ba7800 r5:00000001 r4:c3d636c0
[ 284.315652] [<c08b7a4c>] (vc4_atomic_check) from [<c0881278>] (drm_atomic_check_only+0x5cc/0x7e0)
[ 284.315658] r10:c404c6c8 r9:ffffffff r8:c472c480 r7:00000003 r6:c3d636c0 r5:00000000
[ 284.315662] r4:0000003c r3:c08b7a4c
[ 284.315670] [<c0880cac>] (drm_atomic_check_only) from [<c089ba60>] (drm_mode_atomic_ioctl+0x758/0xa7c)
[ 284.315675] r10:c3d46000 r9:c3d636c0 r8:c2ce8a70 r7:027e3a54 r6:00000043 r5:c1fbb800
[ 284.315679] r4:0281a858
[ 284.315688] [<c089b308>] (drm_mode_atomic_ioctl) from [<c086e9f8>] (drm_ioctl_kernel+0xc4/0x108)
[ 284.315693] r10:c03864bc r9:c1fbb800 r8:c3d47e64 r7:c089b308 r6:00000002 r5:c2ba7800
[ 284.315697] r4:00000000
[ 284.315705] [<c086e934>] (drm_ioctl_kernel) from [<c086ee28>] (drm_ioctl+0x1e8/0x3a0)
[ 284.315711] r9:c1fbb800 r8:000000bc r7:c3d47e64 r6:00000038 r5:c0e59570 r4:00000038
[ 284.315719] [<c086ec40>] (drm_ioctl) from [<c041f354>] (sys_ioctl+0x35c/0x914)
[ 284.315724] r10:c2d08200 r9:00000000 r8:c36fa300 r7:befdd870 r6:c03864bc r5:c36fa301
[ 284.315728] r4:c03864bc
[ 284.315735] [<c041eff8>] (sys_ioctl) from [<c0200040>] (ret_fast_syscall+0x0/0x28)
[ 284.315739] Exception stack(0xc3d47fa8 to 0xc3d47ff0)
[ 284.315745] 7fa0: 027eb750 befdd870 00000000 c03864bc befdd870 00000000
[ 284.315750] 7fc0: 027eb750 befdd870 c03864bc 00000036 027e3948 0281a640 0281a850 027e3a50
[ 284.315756] 7fe0: b4b64100 befdd844 b4b5ba2c b49c994c
[ 284.315762] r10:00000036 r9:c3d46000 r8:c0200204 r7:00000036 r6:c03864bc r5:befdd870
[ 284.315765] r4:027eb750
Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_plane.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index b98eabb52920..8c55679cbaef 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -917,9 +917,9 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
if (!vc4_state->is_unity) {
vc4_dlist_write(vc4_state,
VC4_SET_FIELD(vc4_state->crtc_w,
- SCALER_POS1_SCL_WIDTH) |
+ SCALER5_POS1_SCL_WIDTH) |
VC4_SET_FIELD(vc4_state->crtc_h,
- SCALER_POS1_SCL_HEIGHT));
+ SCALER5_POS1_SCL_HEIGHT));
}
/* Position Word 2: Source Image Size */
--
2.29.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-01-22 8:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-21 10:57 [PATCH 1/2] drm/vc4: Correct lbm size and calculation Maxime Ripard
2021-01-21 10:57 ` Maxime Ripard [this message]
2021-01-22 10:14 ` [PATCH 2/2] drm/vc4: Correct POS1_SCL for hvs5 Dave Stevenson
2021-01-23 8:05 ` Lucas Nussbaum
2021-01-23 11:14 ` Ryutaroh Matsumoto
2021-01-25 10:54 ` Maxime Ripard
2021-01-21 11:04 ` [PATCH 1/2] drm/vc4: Correct lbm size and calculation Maxime Ripard
2021-01-21 16:26 ` Lucas Nussbaum
2021-01-22 5:11 ` Ryutaroh Matsumoto
2021-01-22 10:54 ` Maxime Ripard
2021-01-22 10:12 ` Dave Stevenson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210121105759.1262699-2-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=lucas@debian.org \
--cc=popcornmix@gmail.com \
--cc=ryutaroh@ict.e.titech.ac.jp \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).