From: Maxime Ripard <maxime@cerno.tech>
To: dri-devel@lists.freedesktop.org,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Thomas Zimmermann <tzimmermann@suse.de>,
Maxime Ripard <maxime@cerno.tech>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
Dave Stevenson <dave.stevenson@raspberrypi.com>,
David Airlie <airlied@linux.ie>,
bcm-kernel-feedback-list@broadcom.com,
linux-rpi-kernel@lists.infradead.org,
Daniel Vetter <daniel.vetter@intel.com>,
Phil Elwell <phil@raspberrypi.com>,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Subject: [PATCH v3 0/9] drm/vc4: hdmi: Support the 4k @ 60Hz modes
Date: Tue, 13 Apr 2021 16:54:32 +0200 [thread overview]
Message-ID: <20210413145441.483977-1-maxime@cerno.tech> (raw)
Hi,
Here is a series that enables the higher resolutions on the HDMI0 Controller
found in the BCM2711 (RPi4).
In order to work it needs a few adjustments to config.txt, most notably to
enable the enable_hdmi_4kp60 option.
The firmware also has a glitch at the moment and will not properly release the
BSC controllers, which will make the EDID retrieval fail.
We can work around this using the following config.txt options:
disable_fw_kms_setup=1
hdmi_edid_file:0=1
hdmi_edid_filename:0=1366x768.bin
hdmi_ignore_edid:0=1
hdmi_edid_file:1=1
hdmi_edid_filename:1=1366x768.bin
hdmi_ignore_edid:1=1
A fix will come for the firmware eventually.
Let me know what you think,
Maxime
---
Changes from v2:
- Gathered the various tags
- Added Cc stable when relevant
- Split out the check to test whether the scrambler is required into
an helper
- Fixed a bug where the scrambler state wouldn't be tracked properly
if it was enabled at boot
Changes from v1:
- Dropped the range accessors
- Drop the mention of force_turbo
- Reordered the SCRAMBLER_CTL register to match the offset
- Removed duplicate HDMI_14_MAX_TMDS_CLK define
- Warn about enable_hdmi_4kp60 only if there's some modes that can't be reached
- Rework the BVB clock computation
Maxime Ripard (9):
drm/vc4: txp: Properly set the possible_crtcs mask
drm/vc4: crtc: Skip the TXP
drm/vc4: Rework the encoder retrieval code
drm/vc4: hdmi: Prevent clock unbalance
drm/vc4: hvs: Make the HVS bind first
drm/vc4: hdmi: Properly compute the BVB clock rate
drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies
drm/vc4: hdmi: Enable the scrambler
drm/vc4: hdmi: Raise the maximum clock rate
drivers/gpu/drm/vc4/vc4_crtc.c | 28 ++++++-
drivers/gpu/drm/vc4/vc4_drv.c | 47 ++++++++++-
drivers/gpu/drm/vc4/vc4_drv.h | 10 +++
drivers/gpu/drm/vc4/vc4_hdmi.c | 122 ++++++++++++++++++++++++++--
drivers/gpu/drm/vc4/vc4_hdmi.h | 8 ++
drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 3 +
drivers/gpu/drm/vc4/vc4_txp.c | 2 +-
7 files changed, 207 insertions(+), 13 deletions(-)
--
2.30.2
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2021-04-13 14:54 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-13 14:54 Maxime Ripard [this message]
2021-04-13 14:54 ` [PATCH v3 1/9] drm/vc4: txp: Properly set the possible_crtcs mask Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 2/9] drm/vc4: crtc: Skip the TXP Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 3/9] drm/vc4: Rework the encoder retrieval code Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 4/9] drm/vc4: hdmi: Prevent clock unbalance Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 5/9] drm/vc4: hvs: Make the HVS bind first Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 6/9] drm/vc4: hdmi: Properly compute the BVB clock rate Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 7/9] drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 8/9] drm/vc4: hdmi: Enable the scrambler Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 9/9] drm/vc4: hdmi: Raise the maximum clock rate Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210413145441.483977-1-maxime@cerno.tech \
--to=maxime@cerno.tech \
--cc=airlied@linux.ie \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=daniel.vetter@intel.com \
--cc=dave.stevenson@raspberrypi.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-rpi-kernel@lists.infradead.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=nsaenzjulienne@suse.de \
--cc=phil@raspberrypi.com \
--cc=tim.gover@raspberrypi.com \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).