dri-devel Archive on lore.kernel.org
 help / color / Atom feed
From: Maxime Ripard <maxime@cerno.tech>
To: dri-devel@lists.freedesktop.org,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	Maxime Ripard <maxime@cerno.tech>
Cc: Tim Gover <tim.gover@raspberrypi.com>,
	Dave Stevenson <dave.stevenson@raspberrypi.com>,
	David Airlie <airlied@linux.ie>,
	bcm-kernel-feedback-list@broadcom.com,
	linux-rpi-kernel@lists.infradead.org,
	Daniel Vetter <daniel.vetter@intel.com>,
	Phil Elwell <phil@raspberrypi.com>,
	Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Subject: [PATCH v3 7/9] drm/vc4: hdmi: Check and warn if we can't reach 4kp60 frequencies
Date: Tue, 13 Apr 2021 16:54:39 +0200
Message-ID: <20210413145441.483977-8-maxime@cerno.tech> (raw)
In-Reply-To: <20210413145441.483977-1-maxime@cerno.tech>

In order to reach the frequencies needed to output at 594MHz, the
firmware needs to be configured with the appropriate parameters in the
config.txt file (enable_hdmi_4kp60 and force_turbo).

Let's detect it at bind time, warn the user if we can't, and filter out
the relevant modes.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 31 +++++++++++++++++++++++++++++++
 drivers/gpu/drm/vc4/vc4_hdmi.h |  8 ++++++++
 2 files changed, 39 insertions(+)

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index c50dc5a59b2f..01d24ce8a795 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -94,6 +94,11 @@
 
 #define HDMI_14_MAX_TMDS_CLK   (340 * 1000 * 1000)
 
+static bool vc4_hdmi_mode_needs_scrambling(const struct drm_display_mode *mode)
+{
+	return (mode->clock * 1000) > HDMI_14_MAX_TMDS_CLK;
+}
+
 static int vc4_hdmi_debugfs_regs(struct seq_file *m, void *unused)
 {
 	struct drm_info_node *node = (struct drm_info_node *)m->private;
@@ -210,6 +215,18 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
 	ret = drm_add_edid_modes(connector, edid);
 	kfree(edid);
 
+	if (vc4_hdmi->disable_4kp60) {
+		struct drm_device *drm = connector->dev;
+		struct drm_display_mode *mode;
+
+		list_for_each_entry(mode, &connector->probed_modes, head) {
+			if (vc4_hdmi_mode_needs_scrambling(mode)) {
+				drm_warn_once(drm, "The core clock cannot reach frequencies high enough to support 4k @ 60Hz.");
+				drm_warn_once(drm, "Please change your config.txt file to add hdmi_enable_4kp60.");
+			}
+		}
+	}
+
 	return ret;
 }
 
@@ -959,6 +976,9 @@ static int vc4_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
 	if (pixel_rate > vc4_hdmi->variant->max_pixel_clock)
 		return -EINVAL;
 
+	if (vc4_hdmi->disable_4kp60 && (pixel_rate > HDMI_14_MAX_TMDS_CLK))
+		return -EINVAL;
+
 	vc4_state->pixel_rate = pixel_rate;
 
 	return 0;
@@ -978,6 +998,9 @@ vc4_hdmi_encoder_mode_valid(struct drm_encoder *encoder,
 	if ((mode->clock * 1000) > vc4_hdmi->variant->max_pixel_clock)
 		return MODE_CLOCK_HIGH;
 
+	if (vc4_hdmi->disable_4kp60 && vc4_hdmi_mode_needs_scrambling(mode))
+		return MODE_CLOCK_HIGH;
+
 	return MODE_OK;
 }
 
@@ -1993,6 +2016,14 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)
 	vc4_hdmi->disable_wifi_frequencies =
 		of_property_read_bool(dev->of_node, "wifi-2.4ghz-coexistence");
 
+	if (variant->max_pixel_clock == 600000000) {
+		struct vc4_dev *vc4 = to_vc4_dev(drm);
+		long max_rate = clk_round_rate(vc4->hvs->core_clk, 550000000);
+
+		if (max_rate < 550000000)
+			vc4_hdmi->disable_4kp60 = true;
+	}
+
 	if (vc4_hdmi->variant->reset)
 		vc4_hdmi->variant->reset(vc4_hdmi);
 
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
index 3cebd1fd00fc..3cd021136402 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.h
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
@@ -154,6 +154,14 @@ struct vc4_hdmi {
 	 */
 	bool disable_wifi_frequencies;
 
+	/*
+	 * Even if HDMI0 on the RPi4 can output modes requiring a pixel
+	 * rate higher than 297MHz, it needs some adjustments in the
+	 * config.txt file to be able to do so and thus won't always be
+	 * available.
+	 */
+	bool disable_4kp60;
+
 	struct cec_adapter *cec_adap;
 	struct cec_msg cec_rx_msg;
 	bool cec_tx_ok;
-- 
2.30.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply index

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-13 14:54 [PATCH v3 0/9] drm/vc4: hdmi: Support the 4k @ 60Hz modes Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 1/9] drm/vc4: txp: Properly set the possible_crtcs mask Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 2/9] drm/vc4: crtc: Skip the TXP Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 3/9] drm/vc4: Rework the encoder retrieval code Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 4/9] drm/vc4: hdmi: Prevent clock unbalance Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 5/9] drm/vc4: hvs: Make the HVS bind first Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 6/9] drm/vc4: hdmi: Properly compute the BVB clock rate Maxime Ripard
2021-04-13 14:54 ` Maxime Ripard [this message]
2021-04-13 14:54 ` [PATCH v3 8/9] drm/vc4: hdmi: Enable the scrambler Maxime Ripard
2021-04-13 14:54 ` [PATCH v3 9/9] drm/vc4: hdmi: Raise the maximum clock rate Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210413145441.483977-8-maxime@cerno.tech \
    --to=maxime@cerno.tech \
    --cc=airlied@linux.ie \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=daniel.vetter@intel.com \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=phil@raspberrypi.com \
    --cc=tim.gover@raspberrypi.com \
    --cc=tzimmermann@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

dri-devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/dri-devel/0 dri-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dri-devel dri-devel/ https://lore.kernel.org/dri-devel \
		dri-devel@lists.freedesktop.org
	public-inbox-index dri-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.freedesktop.lists.dri-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git