From: Matthew Auld <matthew.auld@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Mohammed Khajapasha <mohammed.khajapasha@intel.com>,
dri-devel@lists.freedesktop.org
Subject: [PATCH 5/7] drm/i915/fbdev: Use lmem physical addresses for fb_mmap() on discrete
Date: Mon, 26 Apr 2021 11:18:19 +0100 [thread overview]
Message-ID: <20210426101821.42147-5-matthew.auld@intel.com> (raw)
In-Reply-To: <20210426101821.42147-1-matthew.auld@intel.com>
From: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Use local memory io BAR address for fbdev's fb_mmap() operation on
discrete, fbdev uses the physical address of our framebuffer for its
fb_mmap() fn.
Signed-off-by: Mohammed Khajapasha <mohammed.khajapasha@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
---
drivers/gpu/drm/i915/display/intel_fbdev.c | 29 +++++++++++++++++-----
1 file changed, 23 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_fbdev.c b/drivers/gpu/drm/i915/display/intel_fbdev.c
index ccd00e65a5fe..2b37959da747 100644
--- a/drivers/gpu/drm/i915/display/intel_fbdev.c
+++ b/drivers/gpu/drm/i915/display/intel_fbdev.c
@@ -41,6 +41,8 @@
#include <drm/drm_fb_helper.h>
#include <drm/drm_fourcc.h>
+#include "gem/i915_gem_lmem.h"
+
#include "i915_drv.h"
#include "intel_display_types.h"
#include "intel_fbdev.h"
@@ -178,6 +180,7 @@ static int intelfb_create(struct drm_fb_helper *helper,
unsigned long flags = 0;
bool prealloc = false;
void __iomem *vaddr;
+ struct drm_i915_gem_object *obj;
int ret;
if (intel_fb &&
@@ -232,13 +235,27 @@ static int intelfb_create(struct drm_fb_helper *helper,
info->fbops = &intelfb_ops;
/* setup aperture base/size for vesafb takeover */
- info->apertures->ranges[0].base = ggtt->gmadr.start;
- info->apertures->ranges[0].size = ggtt->mappable_end;
+ obj = intel_fb_obj(&intel_fb->base);
+ if (i915_gem_object_is_lmem(obj)) {
+ struct intel_memory_region *mem = obj->mm.region;
+
+ info->apertures->ranges[0].base = mem->io_start;
+ info->apertures->ranges[0].size = mem->total;
+
+ /* Use fbdev's framebuffer from lmem for discrete */
+ info->fix.smem_start =
+ (unsigned long)(mem->io_start +
+ i915_gem_object_get_dma_address(obj, 0));
+ info->fix.smem_len = obj->base.size;
+ } else {
+ info->apertures->ranges[0].base = ggtt->gmadr.start;
+ info->apertures->ranges[0].size = ggtt->mappable_end;
- /* Our framebuffer is the entirety of fbdev's system memory */
- info->fix.smem_start =
- (unsigned long)(ggtt->gmadr.start + vma->node.start);
- info->fix.smem_len = vma->node.size;
+ /* Our framebuffer is the entirety of fbdev's system memory */
+ info->fix.smem_start =
+ (unsigned long)(ggtt->gmadr.start + vma->node.start);
+ info->fix.smem_len = vma->node.size;
+ }
vaddr = i915_vma_pin_iomap(vma);
if (IS_ERR(vaddr)) {
--
2.26.3
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2021-04-26 10:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-26 10:18 [PATCH 1/7] drm/i915/dg1: Fix mapping type for default state object Matthew Auld
2021-04-26 10:18 ` [PATCH 2/7] drm/i915: Update the helper to set correct mapping Matthew Auld
2021-04-26 10:18 ` [PATCH 3/7] drm/i915/gtt: map the PD up front Matthew Auld
2021-04-26 15:20 ` Tvrtko Ursulin
2021-04-26 16:18 ` Matthew Auld
2021-04-27 8:20 ` Tvrtko Ursulin
2021-04-26 10:18 ` [PATCH 4/7] drm/i915/gtt/dgfx: place the PD in LMEM Matthew Auld
2021-04-26 15:22 ` Tvrtko Ursulin
2021-04-26 16:42 ` Matthew Auld
2021-04-26 10:18 ` Matthew Auld [this message]
2021-04-26 10:18 ` [PATCH 6/7] drm/i915/lmem: Bypass aperture when lmem is available Matthew Auld
2021-04-26 10:18 ` [PATCH 7/7] drm/i915: Return error value when bo not in LMEM for discrete Matthew Auld
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210426101821.42147-5-matthew.auld@intel.com \
--to=matthew.auld@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=mohammed.khajapasha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).