[PATCH AUTOSEL 5.15 05/39] drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

[PATCH AUTOSEL 5.15 05/39] drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY

[Sasha Levin]

From: Julian Braha <julianbraha@gmail.com>

[ Upstream commit bb162bb2b4394108c8f055d1b115735331205e28 ]

When PHY_SUN6I_MIPI_DPHY is selected, and RESET_CONTROLLER
is not selected, Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for PHY_SUN6I_MIPI_DPHY
  Depends on [n]: (ARCH_SUNXI [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y] && COMMON_CLK [=y] && RESET_CONTROLLER [=n]
  Selected by [y]:
  - DRM_SUN6I_DSI [=y] && HAS_IOMEM [=y] && DRM_SUN4I [=y]

This is because DRM_SUN6I_DSI selects PHY_SUN6I_MIPI_DPHY
without selecting or depending on RESET_CONTROLLER, despite
PHY_SUN6I_MIPI_DPHY depending on RESET_CONTROLLER.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise if this
is not the appropriate solution.

v2:
Fixed indentation to match the rest of the file.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109032351.43322-1-julianbraha@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/sun4i/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/sun4i/Kconfig b/drivers/gpu/drm/sun4i/Kconfig
index 5755f0432e774..8c796de53222c 100644
--- a/drivers/gpu/drm/sun4i/Kconfig
+++ b/drivers/gpu/drm/sun4i/Kconfig
@@ -46,6 +46,7 @@ config DRM_SUN6I_DSI
 	default MACH_SUN8I
 	select CRC_CCITT
 	select DRM_MIPI_DSI
+	select RESET_CONTROLLER
 	select PHY_SUN6I_MIPI_DPHY
 	help
 	  Choose this option if you want have an Allwinner SoC with
-- 
2.33.0

[PATCH AUTOSEL 5.15 24/39] drm/amd/pm: Remove artificial freq level on Navi1x

[Sasha Levin]

From: Lijo Lazar <lijo.lazar@amd.com>

[ Upstream commit be83a5676767c99c2417083c29d42aa1e109a69d ]

Print Navi1x fine grained clocks in a consistent manner with other SOCs.
Don't show aritificial DPM level when the current clock equals min or max.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
index b1ad451af06bd..dfba0bc732073 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -1265,7 +1265,7 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 			enum smu_clk_type clk_type, char *buf)
 {
 	uint16_t *curve_settings;
-	int i, size = 0, ret = 0;
+	int i, levels, size = 0, ret = 0;
 	uint32_t cur_value = 0, value = 0, count = 0;
 	uint32_t freq_values[3] = {0};
 	uint32_t mark_index = 0;
@@ -1319,14 +1319,17 @@ static int navi10_print_clk_levels(struct smu_context *smu,
 			freq_values[1] = cur_value;
 			mark_index = cur_value == freq_values[0] ? 0 :
 				     cur_value == freq_values[2] ? 2 : 1;
-			if (mark_index != 1)
-				freq_values[1] = (freq_values[0] + freq_values[2]) / 2;
 
-			for (i = 0; i < 3; i++) {
+			levels = 3;
+			if (mark_index != 1) {
+				levels = 2;
+				freq_values[1] = freq_values[2];
+			}
+
+			for (i = 0; i < levels; i++) {
 				size += sysfs_emit_at(buf, size, "%d: %uMhz %s\n", i, freq_values[i],
 						i == mark_index ? "*" : "");
 			}
-
 		}
 		break;
 	case SMU_PCIE:
-- 
2.33.0

[PATCH AUTOSEL 5.15 25/39] drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again

[Sasha Levin]

From: shaoyunl <shaoyun.liu@amd.com>

[ Upstream commit 2cf49e00d40d5132e3d067b5aa6d84791929ab15 ]

In SRIOV configuration, the reset may failed to bring asic back to normal but stop cpsch
already been called, the start_cpsch will not be called since there is no resume in this
case.  When reset been triggered again, driver should avoid to do uninitialization again.

Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
index f8fce9d05f50c..4f2e0cc8a51a8 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
@@ -1225,6 +1225,11 @@ static int stop_cpsch(struct device_queue_manager *dqm)
 	bool hanging;
 
 	dqm_lock(dqm);
+	if (!dqm->sched_running) {
+		dqm_unlock(dqm);
+		return 0;
+	}
+
 	if (!dqm->is_hws_hang)
 		unmap_queues_cpsch(dqm, KFD_UNMAP_QUEUES_FILTER_ALL_QUEUES, 0);
 	hanging = dqm->is_hws_hang || dqm->is_resetting;
-- 
2.33.0

[PATCH AUTOSEL 5.15 26/39] drm/amd/amdgpu: fix potential memleak

[Sasha Levin]

From: Bernard Zhao <bernard@vivo.com>

[ Upstream commit 27dfaedc0d321b4ea4e10c53e4679d6911ab17aa ]

In function amdgpu_get_xgmi_hive, when kobject_init_and_add failed
There is a potential memleak if not call kobject_put.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bernard Zhao <bernard@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
index 978ac927ac11d..a799e0b1ff736 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_xgmi.c
@@ -386,6 +386,7 @@ struct amdgpu_hive_info *amdgpu_get_xgmi_hive(struct amdgpu_device *adev)
 			"%s", "xgmi_hive_info");
 	if (ret) {
 		dev_err(adev->dev, "XGMI: failed initializing kobject for xgmi hive\n");
+		kobject_put(&hive->kobj);
 		kfree(hive);
 		hive = NULL;
 		goto pro_end;
-- 
2.33.0