dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Biju Das <biju.das.jz@bp.renesas.com>
To: David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>
Cc: Chris Paterson <Chris.Paterson2@renesas.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Prabhakar Mahadev Lad <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	dri-devel@lists.freedesktop.org,
	Biju Das <biju.das@bp.renesas.com>,
	linux-renesas-soc@vger.kernel.org,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Biju Das <biju.das.jz@bp.renesas.com>
Subject: [PATCH v5 05/10] drm: rcar-du: Add rcar_du_lib_mode_cfg_helper_fns()
Date: Wed, 27 Jul 2022 17:07:48 +0100	[thread overview]
Message-ID: <20220727160753.1774761-6-biju.das.jz@bp.renesas.com> (raw)
In-Reply-To: <20220727160753.1774761-1-biju.das.jz@bp.renesas.com>

Add rcar_du_lib_mode_cfg_helper_fns() in RCar DU kms lib to get the
pointer to rcar_du_mode_config_helper, so that both rcar_du_atomic_
commit_tail() and rcar_du_mode_config_helper can be reused by
rcar_du_modeset_init() and rzg2l_du_modeset_init().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
v5:
 * New patch
---
 drivers/gpu/drm/rcar-du/rcar_du_kms.c     | 44 +-----------------
 drivers/gpu/drm/rcar-du/rcar_du_kms_lib.c | 56 +++++++++++++++++++++++
 drivers/gpu/drm/rcar-du/rcar_du_kms_lib.h |  3 ++
 3 files changed, 60 insertions(+), 43 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms.c b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
index 9d65a7d6d96e..ed8d14701178 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms.c
@@ -64,52 +64,10 @@ static int rcar_du_atomic_check(struct drm_device *dev,
 	return rcar_du_atomic_check_planes(dev, state);
 }
 
-static void rcar_du_atomic_commit_tail(struct drm_atomic_state *old_state)
-{
-	struct drm_device *dev = old_state->dev;
-	struct rcar_du_device *rcdu = to_rcar_du_device(dev);
-	struct drm_crtc_state *crtc_state;
-	struct drm_crtc *crtc;
-	unsigned int i;
-
-	/*
-	 * Store RGB routing to DPAD0 and DPAD1, the hardware will be configured
-	 * when starting the CRTCs.
-	 */
-	rcdu->dpad1_source = -1;
-
-	for_each_new_crtc_in_state(old_state, crtc, crtc_state, i) {
-		struct rcar_du_crtc_state *rcrtc_state =
-			to_rcar_crtc_state(crtc_state);
-		struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
-
-		if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD0))
-			rcdu->dpad0_source = rcrtc->index;
-
-		if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD1))
-			rcdu->dpad1_source = rcrtc->index;
-	}
-
-	/* Apply the atomic update. */
-	drm_atomic_helper_commit_modeset_disables(dev, old_state);
-	drm_atomic_helper_commit_planes(dev, old_state,
-					DRM_PLANE_COMMIT_ACTIVE_ONLY);
-	drm_atomic_helper_commit_modeset_enables(dev, old_state);
-
-	drm_atomic_helper_commit_hw_done(old_state);
-	drm_atomic_helper_wait_for_flip_done(dev, old_state);
-
-	drm_atomic_helper_cleanup_planes(dev, old_state);
-}
-
 /* -----------------------------------------------------------------------------
  * Initialization
  */
 
-static const struct drm_mode_config_helper_funcs rcar_du_mode_config_helper = {
-	.atomic_commit_tail = rcar_du_atomic_commit_tail,
-};
-
 static const struct drm_mode_config_funcs rcar_du_mode_config_funcs = {
 	.fb_create = rcar_du_fb_create,
 	.atomic_check = rcar_du_atomic_check,
@@ -415,7 +373,7 @@ int rcar_du_modeset_init(struct rcar_du_device *rcdu)
 	dev->mode_config.min_height = 0;
 	dev->mode_config.normalize_zpos = true;
 	dev->mode_config.funcs = &rcar_du_mode_config_funcs;
-	dev->mode_config.helper_private = &rcar_du_mode_config_helper;
+	dev->mode_config.helper_private = rcar_du_lib_mode_cfg_helper_fns();
 
 	if (rcdu->info->gen < 3) {
 		dev->mode_config.max_width = 4095;
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.c b/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.c
index d8f778a7b6db..a1027436cfe3 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.c
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.c
@@ -461,3 +461,59 @@ rcar_du_lib_fb_create(struct drm_device *dev, struct drm_file *file_priv,
 
 	return drm_gem_fb_create(dev, file_priv, mode_cmd);
 }
+
+/* -----------------------------------------------------------------------------
+ * Atomic Check and Update
+ */
+
+static void rcar_du_atomic_commit_tail(struct drm_atomic_state *old_state)
+{
+	struct drm_device *dev = old_state->dev;
+	struct rcar_du_device *rcdu = to_rcar_du_device(dev);
+	struct drm_crtc_state *crtc_state;
+	struct drm_crtc *crtc;
+	unsigned int i;
+
+	/*
+	 * Store RGB routing to DPAD0 and DPAD1, the hardware will be configured
+	 * when starting the CRTCs.
+	 */
+	rcdu->dpad1_source = -1;
+
+	for_each_new_crtc_in_state(old_state, crtc, crtc_state, i) {
+		struct rcar_du_crtc_state *rcrtc_state =
+			to_rcar_crtc_state(crtc_state);
+		struct rcar_du_crtc *rcrtc = to_rcar_crtc(crtc);
+
+		if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD0))
+			rcdu->dpad0_source = rcrtc->index;
+
+		if (rcrtc_state->outputs & BIT(RCAR_DU_OUTPUT_DPAD1))
+			rcdu->dpad1_source = rcrtc->index;
+	}
+
+	/* Apply the atomic update. */
+	drm_atomic_helper_commit_modeset_disables(dev, old_state);
+	drm_atomic_helper_commit_planes(dev, old_state,
+					DRM_PLANE_COMMIT_ACTIVE_ONLY);
+	drm_atomic_helper_commit_modeset_enables(dev, old_state);
+
+	drm_atomic_helper_commit_hw_done(old_state);
+	drm_atomic_helper_wait_for_flip_done(dev, old_state);
+
+	drm_atomic_helper_cleanup_planes(dev, old_state);
+}
+
+/* -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static const struct drm_mode_config_helper_funcs rcar_du_mode_config_helper = {
+	.atomic_commit_tail = rcar_du_atomic_commit_tail,
+};
+
+const struct drm_mode_config_helper_funcs *
+rcar_du_lib_mode_cfg_helper_fns(void)
+{
+	return &rcar_du_mode_config_helper;
+}
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.h b/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.h
index 160928dc68b8..8a689ac6c83f 100644
--- a/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.h
+++ b/drivers/gpu/drm/rcar-du/rcar_du_kms_lib.h
@@ -43,4 +43,7 @@ struct drm_framebuffer *
 rcar_du_lib_fb_create(struct drm_device *dev, struct drm_file *file_priv,
 		      const struct drm_mode_fb_cmd2 *mode_cmd);
 
+const struct drm_mode_config_helper_funcs *
+rcar_du_lib_mode_cfg_helper_fns(void);
+
 #endif /* __RCAR_DU_KMS_LIB_H__ */
-- 
2.25.1


  parent reply	other threads:[~2022-07-27 16:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-27 16:07 [PATCH v5 00/10] Add RZ/G2L Display support Biju Das
2022-07-27 16:07 ` [PATCH v5 01/10] drm: rcar-du: Move rcar_du_vsp_plane_prepare_fb() Biju Das
2022-07-27 16:07 ` [PATCH v5 02/10] drm: rcar-du: Move rcar_du_vsp_plane_cleanup_fb() Biju Das
2022-07-27 16:07 ` [PATCH v5 03/10] drm: rcar-du: Move rcar_du_vsp_plane_atomic_update() Biju Das
2022-07-27 16:07 ` [PATCH v5 04/10] drm: rcar-du: Add rcar_du_lib_fb_create() Biju Das
2022-08-18  9:29   ` Geert Uytterhoeven
2022-08-24  8:57     ` Biju Das
2022-07-27 16:07 ` Biju Das [this message]
2022-07-27 16:07 ` [PATCH v5 06/10] drm: rcar-du: Move rcar_du_encoders_init() Biju Das
2022-07-27 16:07 ` [PATCH v5 07/10] drm: rcar-du: Move rcar_du_properties_init() Biju Das
2022-07-27 16:07 ` [PATCH v5 08/10] drm: rcar-du: Add rcar_du_lib_vsps_init() Biju Das
2022-07-27 16:07 ` [PATCH v5 09/10] dt-bindings: display: Document Renesas RZ/G2L DU bindings Biju Das
2022-07-27 16:07 ` [PATCH v5 10/10] drm: rcar-du: Add RZ/G2L DU Support Biju Das

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220727160753.1774761-6-biju.das.jz@bp.renesas.com \
    --to=biju.das.jz@bp.renesas.com \
    --cc=Chris.Paterson2@renesas.com \
    --cc=airlied@linux.ie \
    --cc=biju.das@bp.renesas.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).