* [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board
@ 2023-06-07 6:31 Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 1/6] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
` (6 more replies)
0 siblings, 7 replies; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: Neil Armstrong, Conor Dooley, Dario Binacchi,
Krzysztof Kozlowski, Raphael Gallais-Pou, Yannick Fertre,
Alexandre Torgue, dri-devel, Sam Ravnborg, devicetree,
Rob Herring, Thierry Reding, Philippe Cornu, Maxime Coquelin,
michael, Amarula patchwork, linux-stm32, linux-arm-kernel
The series adds support for the display on the stm32f746-disco board,
along with a generic patch that adds the "bpp" parameter to the stm-drm
module. The intention is to allow users to size, within certain limits,
the memory footprint required by the framebuffer.
Changes in v2:
- Add 'Acked-by' tag of Conor Dooley.
- Fix build warning reported by kernel test robot.
- Add 'Reported-by' tag of kernel test robot.
Dario Binacchi (6):
ARM: dts: stm32: add ltdc support on stm32f746 MCU
ARM: dts: stm32: add pin map for LTDC on stm32f7
ARM: dts: stm32: support display on stm32f746-disco board
dt-bindings: display: simple: add Rocktech RK043FN48H
drm/panel: simple: add support for Rocktech RK043FN48H panel
drm/stm: add an option to change FB bpp
.../bindings/display/panel/panel-simple.yaml | 2 +
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 +++++++++++++
arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++
arch/arm/boot/dts/stm32f746.dtsi | 10 ++++
drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++
drivers/gpu/drm/stm/drv.c | 8 ++-
6 files changed, 134 insertions(+), 1 deletion(-)
--
2.32.0
^ permalink raw reply [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 1/6] ARM: dts: stm32: add ltdc support on stm32f746 MCU
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi
` (5 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, Conor Dooley, Dario Binacchi, Krzysztof Kozlowski,
Raphael Gallais-Pou, Alexandre Torgue, dri-devel, Rob Herring,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
Add LTDC (Lcd-tft Display Controller) support.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
arch/arm/boot/dts/stm32f746.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index dc868e6da40e..9c4ba0b7f239 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -507,6 +507,16 @@ pwm {
};
};
+ ltdc: display-controller@40016800 {
+ compatible = "st,stm32-ltdc";
+ reg = <0x40016800 0x200>;
+ interrupts = <88>, <89>;
+ resets = <&rcc STM32F7_APB2_RESET(LTDC)>;
+ clocks = <&rcc 1 CLK_LCD>;
+ clock-names = "lcd";
+ status = "disabled";
+ };
+
pwrcfg: power-config@40007000 {
compatible = "st,stm32-power-config", "syscon";
reg = <0x40007000 0x400>;
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 1/6] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-08 12:42 ` Alexandre TORGUE
2023-06-07 6:31 ` [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
` (4 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, Conor Dooley, Dario Binacchi, Krzysztof Kozlowski,
Raphael Gallais-Pou, Alexandre Torgue, dri-devel, Rob Herring,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
Add pin configurations for using LTDC (LCD-tft Display Controller) on
stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
index 9f65403295ca..f3f90b9bcd61 100644
--- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
@@ -365,6 +365,41 @@ pins2 {
bias-pull-up;
};
};
+
+
+ ltdc_pins_a: ltdc-pins-a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
+ <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
+ slew-rate = <2>;
+ };
+ };
};
};
};
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 1/6] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-07 6:42 ` Jagan Teki
2023-06-07 6:31 ` [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Dario Binacchi
` (3 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: devicetree, Conor Dooley, Dario Binacchi, Krzysztof Kozlowski,
Raphael Gallais-Pou, Alexandre Torgue, dri-devel, Rob Herring,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
Add support to Rocktech RK043FN48H display on stm32f746-disco board.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
index c11616ed5fc6..cda423b6a874 100644
--- a/arch/arm/boot/dts/stm32f746-disco.dts
+++ b/arch/arm/boot/dts/stm32f746-disco.dts
@@ -60,10 +60,41 @@ memory@c0000000 {
reg = <0xC0000000 0x800000>;
};
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ linux,cma {
+ compatible = "shared-dma-pool";
+ no-map;
+ size = <0x80000>;
+ linux,dma-default;
+ };
+ };
+
aliases {
serial0 = &usart1;
};
+ backlight: backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ panel_rgb: panel-rgb {
+ compatible = "rocktech,rk043fn48h";
+ backlight = <&backlight>;
+ enable-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ port {
+ panel_in_rgb: endpoint {
+ remote-endpoint = <<dc_out_rgb>;
+ };
+ };
+ };
+
usbotg_hs_phy: usb-phy {
#phy-cells = <0>;
compatible = "usb-nop-xceiv";
@@ -99,6 +130,26 @@ &i2c1 {
status = "okay";
};
+&dma1 {
+ status = "okay";
+};
+
+&dma2 {
+ status = "okay";
+};
+
+<dc {
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ port {
+ ltdc_out_rgb: endpoint {
+ remote-endpoint = <&panel_in_rgb>;
+ };
+ };
+};
+
&sdio1 {
status = "okay";
vmmc-supply = <&mmc_vcard>;
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
` (2 preceding siblings ...)
2023-06-07 6:31 ` [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-07 6:40 ` Jagan Teki
2023-06-07 7:16 ` Raphael Gallais-Pou
2023-06-07 6:31 ` [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel Dario Binacchi
` (2 subsequent siblings)
6 siblings, 2 replies; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: Neil Armstrong, Conor Dooley, Dario Binacchi,
Krzysztof Kozlowski, Raphael Gallais-Pou, devicetree,
Alexandre Torgue, dri-devel, Sam Ravnborg, Conor Dooley,
Rob Herring, Thierry Reding, Philippe Cornu, Maxime Coquelin,
michael, Amarula patchwork, linux-stm32, linux-arm-kernel
Add compatible to panel-simple for Rocktech Displays Limited
RK043FN48H 4.3" 480x272 LCD-TFT panel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
Changes in v2:
- Add 'Acked-by' tag of Conor Dooley.
.../devicetree/bindings/display/panel/panel-simple.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 01560fe226dd..bd6a92d2b41c 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -280,6 +280,8 @@ properties:
- rocktech,rk101ii01d-ct
# Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel
- rocktech,rk070er9427
+ # Rocktech Display Ltd. RK043FN48H 4.3" 480x272 LCD-TFT panel
+ - rocktech,rk043fn48h
# Samsung 13.3" FHD (1920x1080 pixels) eDP AMOLED panel
- samsung,atna33xc20
# Samsung 12.2" (2560x1600 pixels) TFT LCD panel
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
` (3 preceding siblings ...)
2023-06-07 6:31 ` [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-07 6:39 ` Jagan Teki
2023-06-07 6:31 ` [RESEND PATCH v2 6/6] drm/stm: add an option to change FB bpp Dario Binacchi
2023-06-07 8:15 ` (subset) [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Neil Armstrong
6 siblings, 1 reply; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: Neil Armstrong, Dario Binacchi, kernel test robot, Sam Ravnborg,
Raphael Gallais-Pou, Alexandre Torgue, dri-devel, Philippe Cornu,
Maxime Coquelin, michael, Amarula patchwork, linux-stm32,
linux-arm-kernel
Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/
---
Changes in v2:
- Fix build warning reported by kernel test robot.
- Add 'Reported-by' tag of kernel test robot.
drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 065f378bba9d..3b10e78d07d9 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -3188,6 +3188,32 @@ static const struct panel_desc qishenglong_gopher2b_lcd = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct display_timing rocktech_rk043fn48h_timing = {
+ .pixelclock = { 6000000, 9000000, 12000000 },
+ .hactive = { 480, 480, 480 },
+ .hback_porch = { 8, 43, 43 },
+ .hfront_porch = { 2, 8, 8 },
+ .hsync_len = { 1, 1, 1 },
+ .vactive = { 272, 272, 272 },
+ .vback_porch = { 2, 12, 12 },
+ .vfront_porch = { 1, 4, 4 },
+ .vsync_len = { 1, 10, 10 },
+ .flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW |
+ DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
+};
+
+static const struct panel_desc rocktech_rk043fn48h = {
+ .timings = &rocktech_rk043fn48h_timing,
+ .num_timings = 1,
+ .bpc = 8,
+ .size = {
+ .width = 95,
+ .height = 54,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct display_timing rocktech_rk070er9427_timing = {
.pixelclock = { 26400000, 33300000, 46800000 },
.hactive = { 800, 800, 800 },
@@ -4218,6 +4244,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "qishenglong,gopher2b-lcd",
.data = &qishenglong_gopher2b_lcd,
+ }, {
+ .compatible = "rocktech,rk043fn48h",
+ .data = &rocktech_rk043fn48h,
}, {
.compatible = "rocktech,rk070er9427",
.data = &rocktech_rk070er9427,
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* [RESEND PATCH v2 6/6] drm/stm: add an option to change FB bpp
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
` (4 preceding siblings ...)
2023-06-07 6:31 ` [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel Dario Binacchi
@ 2023-06-07 6:31 ` Dario Binacchi
2023-06-07 8:15 ` (subset) [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Neil Armstrong
6 siblings, 0 replies; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 6:31 UTC (permalink / raw)
To: linux-kernel
Cc: Dario Binacchi, Raphael Gallais-Pou, Yannick Fertre,
Alexandre Torgue, dri-devel, Philippe Cornu, Maxime Coquelin,
michael, Amarula patchwork, linux-stm32, linux-arm-kernel
Boards that use the STM32F{4,7} series have limited amounts of RAM. The
added parameter allows users to size, within certain limits, the memory
footprint required by the framebuffer.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
---
(no changes since v1)
drivers/gpu/drm/stm/drv.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/stm/drv.c b/drivers/gpu/drm/stm/drv.c
index 422220df7d8c..65be2b442a6a 100644
--- a/drivers/gpu/drm/stm/drv.c
+++ b/drivers/gpu/drm/stm/drv.c
@@ -30,6 +30,11 @@
#define STM_MAX_FB_WIDTH 2048
#define STM_MAX_FB_HEIGHT 2048 /* same as width to handle orientation */
+static uint stm_bpp = 16;
+
+MODULE_PARM_DESC(bpp, "bits-per-pixel (default: 16)");
+module_param_named(bpp, stm_bpp, uint, 0644);
+
static const struct drm_mode_config_funcs drv_mode_config_funcs = {
.fb_create = drm_gem_fb_create,
.atomic_check = drm_atomic_helper_check,
@@ -93,6 +98,7 @@ static int drv_load(struct drm_device *ddev)
ddev->mode_config.min_height = 0;
ddev->mode_config.max_width = STM_MAX_FB_WIDTH;
ddev->mode_config.max_height = STM_MAX_FB_HEIGHT;
+ ddev->mode_config.preferred_depth = stm_bpp;
ddev->mode_config.funcs = &drv_mode_config_funcs;
ddev->mode_config.normalize_zpos = true;
@@ -203,7 +209,7 @@ static int stm_drm_platform_probe(struct platform_device *pdev)
if (ret)
goto err_put;
- drm_fbdev_dma_setup(ddev, 16);
+ drm_fbdev_dma_setup(ddev, stm_bpp);
return 0;
--
2.32.0
^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
2023-06-07 6:31 ` [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel Dario Binacchi
@ 2023-06-07 6:39 ` Jagan Teki
0 siblings, 0 replies; 16+ messages in thread
From: Jagan Teki @ 2023-06-07 6:39 UTC (permalink / raw)
To: Dario Binacchi
Cc: Neil Armstrong, kernel test robot, Sam Ravnborg,
Raphael Gallais-Pou, linux-kernel, dri-devel, Alexandre Torgue,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
On Wed, Jun 7, 2023 at 12:01 PM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> Add support for Rocktech RK043FN48H 4.3" (480x272) LCD-TFT panel.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Reported-by: kernel test robot <lkp@intel.com>
> Closes: https://lore.kernel.org/oe-kbuild-all/202306020343.jNTWeM0P-lkp@intel.com/
>
> ---
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
2023-06-07 6:31 ` [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Dario Binacchi
@ 2023-06-07 6:40 ` Jagan Teki
2023-06-07 7:16 ` Raphael Gallais-Pou
1 sibling, 0 replies; 16+ messages in thread
From: Jagan Teki @ 2023-06-07 6:40 UTC (permalink / raw)
To: Dario Binacchi
Cc: Neil Armstrong, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, devicetree, linux-kernel, dri-devel,
Alexandre Torgue, Sam Ravnborg, Conor Dooley, Rob Herring,
Thierry Reding, Philippe Cornu, Maxime Coquelin, michael,
Amarula patchwork, linux-stm32, linux-arm-kernel
On Wed, Jun 7, 2023 at 12:01 PM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> Add compatible to panel-simple for Rocktech Displays Limited
> RK043FN48H 4.3" 480x272 LCD-TFT panel.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
>
> ---
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board
2023-06-07 6:31 ` [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
@ 2023-06-07 6:42 ` Jagan Teki
2023-06-07 12:49 ` Dario Binacchi
0 siblings, 1 reply; 16+ messages in thread
From: Jagan Teki @ 2023-06-07 6:42 UTC (permalink / raw)
To: Dario Binacchi
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, linux-kernel, dri-devel, Alexandre Torgue,
Rob Herring, Philippe Cornu, Maxime Coquelin, michael,
Amarula patchwork, linux-stm32, linux-arm-kernel
On Wed, Jun 7, 2023 at 12:01 PM Dario Binacchi
<dario.binacchi@amarulasolutions.com> wrote:
>
> Add support to Rocktech RK043FN48H display on stm32f746-disco board.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> (no changes since v1)
>
> arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++++++++++
> 1 file changed, 51 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
> index c11616ed5fc6..cda423b6a874 100644
> --- a/arch/arm/boot/dts/stm32f746-disco.dts
> +++ b/arch/arm/boot/dts/stm32f746-disco.dts
> @@ -60,10 +60,41 @@ memory@c0000000 {
> reg = <0xC0000000 0x800000>;
> };
>
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + linux,cma {
> + compatible = "shared-dma-pool";
> + no-map;
> + size = <0x80000>;
> + linux,dma-default;
> + };
> + };
This looks unrelated to display enablement, isn't it?
Jagan.
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
2023-06-07 6:31 ` [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Dario Binacchi
2023-06-07 6:40 ` Jagan Teki
@ 2023-06-07 7:16 ` Raphael Gallais-Pou
1 sibling, 0 replies; 16+ messages in thread
From: Raphael Gallais-Pou @ 2023-06-07 7:16 UTC (permalink / raw)
To: Dario Binacchi, linux-kernel
Cc: Neil Armstrong, Conor Dooley, Krzysztof Kozlowski, devicetree,
Alexandre Torgue, dri-devel, Sam Ravnborg, Conor Dooley,
Rob Herring, Thierry Reding, Philippe Cornu, Maxime Coquelin,
michael, Amarula patchwork, linux-stm32, linux-arm-kernel
On 6/7/23 08:31, Dario Binacchi wrote:
> Add compatible to panel-simple for Rocktech Displays Limited
> RK043FN48H 4.3" 480x272 LCD-TFT panel.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Thanks,
Raphaël
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: (subset) [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
` (5 preceding siblings ...)
2023-06-07 6:31 ` [RESEND PATCH v2 6/6] drm/stm: add an option to change FB bpp Dario Binacchi
@ 2023-06-07 8:15 ` Neil Armstrong
6 siblings, 0 replies; 16+ messages in thread
From: Neil Armstrong @ 2023-06-07 8:15 UTC (permalink / raw)
To: linux-kernel, Dario Binacchi
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, Yannick Fertre, Alexandre Torgue, dri-devel,
Sam Ravnborg, Rob Herring, Thierry Reding, Philippe Cornu,
Maxime Coquelin, michael, Amarula patchwork, linux-stm32,
linux-arm-kernel
Hi,
On Wed, 07 Jun 2023 08:31:33 +0200, Dario Binacchi wrote:
> The series adds support for the display on the stm32f746-disco board,
> along with a generic patch that adds the "bpp" parameter to the stm-drm
> module. The intention is to allow users to size, within certain limits,
> the memory footprint required by the framebuffer.
>
> Changes in v2:
> - Add 'Acked-by' tag of Conor Dooley.
> - Fix build warning reported by kernel test robot.
> - Add 'Reported-by' tag of kernel test robot.
>
> [...]
Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
[4/6] dt-bindings: display: simple: add Rocktech RK043FN48H
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c42a37a27c777d63961dd634a30f7c887949491a
[5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=13cdd12a9f934158f4ec817cf048fcb4384aa9dc
--
Neil
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board
2023-06-07 6:42 ` Jagan Teki
@ 2023-06-07 12:49 ` Dario Binacchi
0 siblings, 0 replies; 16+ messages in thread
From: Dario Binacchi @ 2023-06-07 12:49 UTC (permalink / raw)
To: Jagan Teki
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, linux-kernel, dri-devel, Alexandre Torgue,
Rob Herring, Philippe Cornu, Maxime Coquelin, michael,
Amarula patchwork, linux-stm32, linux-arm-kernel
Hi Jagan,
On Wed, Jun 7, 2023 at 8:43 AM Jagan Teki <jagan@amarulasolutions.com> wrote:
>
> On Wed, Jun 7, 2023 at 12:01 PM Dario Binacchi
> <dario.binacchi@amarulasolutions.com> wrote:
> >
> > Add support to Rocktech RK043FN48H display on stm32f746-disco board.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > (no changes since v1)
> >
> > arch/arm/boot/dts/stm32f746-disco.dts | 51 +++++++++++++++++++++++++++
> > 1 file changed, 51 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stm32f746-disco.dts b/arch/arm/boot/dts/stm32f746-disco.dts
> > index c11616ed5fc6..cda423b6a874 100644
> > --- a/arch/arm/boot/dts/stm32f746-disco.dts
> > +++ b/arch/arm/boot/dts/stm32f746-disco.dts
> > @@ -60,10 +60,41 @@ memory@c0000000 {
> > reg = <0xC0000000 0x800000>;
> > };
> >
> > + reserved-memory {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > + ranges;
> > +
> > + linux,cma {
> > + compatible = "shared-dma-pool";
> > + no-map;
> > + size = <0x80000>;
> > + linux,dma-default;
> > + };
> > + };
>
> This looks unrelated to display enablement, isn't it?
Without the "reserved-memory" node, it is not possible to allocate
memory for the framebuffer.
I got this error:
stm32-display 40016800.display-controller: [drm] *ERROR* failed to
allocate buffer with size 139264
Thanks and regards,
Dario
>
> Jagan.
--
Dario Binacchi
Senior Embedded Linux Developer
dario.binacchi@amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7
2023-06-07 6:31 ` [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi
@ 2023-06-08 12:42 ` Alexandre TORGUE
2023-06-09 6:21 ` Dario Binacchi
0 siblings, 1 reply; 16+ messages in thread
From: Alexandre TORGUE @ 2023-06-08 12:42 UTC (permalink / raw)
To: Dario Binacchi, linux-kernel
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, dri-devel, Rob Herring, Philippe Cornu,
Maxime Coquelin, michael, Amarula patchwork, linux-stm32,
linux-arm-kernel
Hi Dario
On 6/7/23 08:31, Dario Binacchi wrote:
> Add pin configurations for using LTDC (LCD-tft Display Controller) on
> stm32f746-disco board.
>
> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> ---
>
> (no changes since v1)
>
> arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
>
> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> index 9f65403295ca..f3f90b9bcd61 100644
> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> @@ -365,6 +365,41 @@ pins2 {
> bias-pull-up;
> };
> };
> +
> +
> + ltdc_pins_a: ltdc-pins-a-0 {
ltdc-pins-a-0 --> ltdc-pins-0 is a bit cleaner. I know that I have to
fix sdio pins nodes in this file to keep the same spirit for all group
names.
If there is no V3 I wil do it directly when I'll apply DT patches if you
agree.
Alex
> + pins {
> + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
> + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */
> + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
> + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
> + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
> + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
> + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
> + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
> + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
> + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
> + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
> + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
> + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
> + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
> + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
> + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
> + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
> + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
> + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
> + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
> + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
> + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
> + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
> + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
> + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
> + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
> + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
> + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
> + slew-rate = <2>;
> + };
> + };
> };
> };
> };
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7
2023-06-08 12:42 ` Alexandre TORGUE
@ 2023-06-09 6:21 ` Dario Binacchi
2023-06-12 7:35 ` Alexandre TORGUE
0 siblings, 1 reply; 16+ messages in thread
From: Dario Binacchi @ 2023-06-09 6:21 UTC (permalink / raw)
To: Alexandre TORGUE
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, linux-kernel, dri-devel, Rob Herring,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
Hi Alexandre,
On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
<alexandre.torgue@foss.st.com> wrote:
>
> Hi Dario
>
> On 6/7/23 08:31, Dario Binacchi wrote:
> > Add pin configurations for using LTDC (LCD-tft Display Controller) on
> > stm32f746-disco board.
> >
> > Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
> > ---
> >
> > (no changes since v1)
> >
> > arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > index 9f65403295ca..f3f90b9bcd61 100644
> > --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
> > @@ -365,6 +365,41 @@ pins2 {
> > bias-pull-up;
> > };
> > };
> > +
> > +
> > + ltdc_pins_a: ltdc-pins-a-0 {
>
> ltdc-pins-a-0 --> ltdc-pins-0 is a bit cleaner. I know that I have to
> fix sdio pins nodes in this file to keep the same spirit for all group
> names.
I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
based on the following nodes:
usart1_pins_a: usart1-0
i2c1_pins_b: i2c1-0
can1_pins_a: can1-0
I have decided to rename ltdc-pins-a-0 to ltdc-0.
I hope you agree.
Thanks and regards,
Dario
>
> If there is no V3 I wil do it directly when I'll apply DT patches if you
> agree.
>
> Alex
>
>
> > + pins {
> > + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
> > + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */
> > + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
> > + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
> > + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
> > + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
> > + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
> > + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
> > + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
> > + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
> > + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
> > + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
> > + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
> > + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
> > + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
> > + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
> > + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
> > + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
> > + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
> > + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
> > + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
> > + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
> > + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
> > + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
> > + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
> > + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
> > + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
> > + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
> > + slew-rate = <2>;
> > + };
> > + };
> > };
> > };
> > };
>
--
Dario Binacchi
Senior Embedded Linux Developer
dario.binacchi@amarulasolutions.com
__________________________________
Amarula Solutions SRL
Via Le Canevare 30, 31100 Treviso, Veneto, IT
T. +39 042 243 5310
info@amarulasolutions.com
www.amarulasolutions.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7
2023-06-09 6:21 ` Dario Binacchi
@ 2023-06-12 7:35 ` Alexandre TORGUE
0 siblings, 0 replies; 16+ messages in thread
From: Alexandre TORGUE @ 2023-06-12 7:35 UTC (permalink / raw)
To: Dario Binacchi
Cc: devicetree, Conor Dooley, Krzysztof Kozlowski,
Raphael Gallais-Pou, linux-kernel, dri-devel, Rob Herring,
Philippe Cornu, Maxime Coquelin, michael, Amarula patchwork,
linux-stm32, linux-arm-kernel
hi Dario
On 6/9/23 08:21, Dario Binacchi wrote:
> Hi Alexandre,
>
> On Thu, Jun 8, 2023 at 2:42 PM Alexandre TORGUE
> <alexandre.torgue@foss.st.com> wrote:
>>
>> Hi Dario
>>
>> On 6/7/23 08:31, Dario Binacchi wrote:
>>> Add pin configurations for using LTDC (LCD-tft Display Controller) on
>>> stm32f746-disco board.
>>>
>>> Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
>>> ---
>>>
>>> (no changes since v1)
>>>
>>> arch/arm/boot/dts/stm32f7-pinctrl.dtsi | 35 ++++++++++++++++++++++++++
>>> 1 file changed, 35 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> index 9f65403295ca..f3f90b9bcd61 100644
>>> --- a/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> +++ b/arch/arm/boot/dts/stm32f7-pinctrl.dtsi
>>> @@ -365,6 +365,41 @@ pins2 {
>>> bias-pull-up;
>>> };
>>> };
>>> +
>>> +
>>> + ltdc_pins_a: ltdc-pins-a-0 {
>>
>> ltdc-pins-a-0 --> ltdc-pins-0 is a bit cleaner. I know that I have to
>> fix sdio pins nodes in this file to keep the same spirit for all group
>> names.
>
> I have looked at the file arch/arm/boot/dts/stm32f7-pinctrl.dtsi, and
> based on the following nodes:
> usart1_pins_a: usart1-0
> i2c1_pins_b: i2c1-0
> can1_pins_a: can1-0
>
> I have decided to rename ltdc-pins-a-0 to ltdc-0.
>
> I hope you agree.
Yes! perfect.
Alex
>
> Thanks and regards,
>
> Dario
>
>>
>> If there is no V3 I wil do it directly when I'll apply DT patches if you
>> agree.
>>
>> Alex
>>
>>
>>> + pins {
>>> + pinmux = <STM32_PINMUX('E', 4, AF14)>, /* LCD_B0 */
>>> + <STM32_PINMUX('G',12, AF9)>, /* LCD_B4 */
>>> + <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
>>> + <STM32_PINMUX('I',10, AF14)>, /* LCD_HSYNC */
>>> + <STM32_PINMUX('I',14, AF14)>, /* LCD_CLK */
>>> + <STM32_PINMUX('I',15, AF14)>, /* LCD_R0 */
>>> + <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
>>> + <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
>>> + <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
>>> + <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
>>> + <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
>>> + <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
>>> + <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
>>> + <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
>>> + <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
>>> + <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
>>> + <STM32_PINMUX('J',10, AF14)>, /* LCD_G3 */
>>> + <STM32_PINMUX('J',11, AF14)>, /* LCD_G4 */
>>> + <STM32_PINMUX('J',13, AF14)>, /* LCD_B1 */
>>> + <STM32_PINMUX('J',14, AF14)>, /* LCD_B2 */
>>> + <STM32_PINMUX('J',15, AF14)>, /* LCD_B3 */
>>> + <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
>>> + <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
>>> + <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
>>> + <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
>>> + <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
>>> + <STM32_PINMUX('K', 6, AF14)>, /* LCD_B7 */
>>> + <STM32_PINMUX('K', 7, AF14)>; /* LCD_DE */
>>> + slew-rate = <2>;
>>> + };
>>> + };
>>> };
>>> };
>>> };
>>
>
>
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2023-06-12 7:36 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-07 6:31 [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 1/6] ARM: dts: stm32: add ltdc support on stm32f746 MCU Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 2/6] ARM: dts: stm32: add pin map for LTDC on stm32f7 Dario Binacchi
2023-06-08 12:42 ` Alexandre TORGUE
2023-06-09 6:21 ` Dario Binacchi
2023-06-12 7:35 ` Alexandre TORGUE
2023-06-07 6:31 ` [RESEND PATCH v2 3/6] ARM: dts: stm32: support display on stm32f746-disco board Dario Binacchi
2023-06-07 6:42 ` Jagan Teki
2023-06-07 12:49 ` Dario Binacchi
2023-06-07 6:31 ` [RESEND PATCH v2 4/6] dt-bindings: display: simple: add Rocktech RK043FN48H Dario Binacchi
2023-06-07 6:40 ` Jagan Teki
2023-06-07 7:16 ` Raphael Gallais-Pou
2023-06-07 6:31 ` [RESEND PATCH v2 5/6] drm/panel: simple: add support for Rocktech RK043FN48H panel Dario Binacchi
2023-06-07 6:39 ` Jagan Teki
2023-06-07 6:31 ` [RESEND PATCH v2 6/6] drm/stm: add an option to change FB bpp Dario Binacchi
2023-06-07 8:15 ` (subset) [RESEND PATCH v2 0/6] Add display support on the stm32f746-disco board Neil Armstrong
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).