* [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes
@ 2022-09-24 9:43 Dmitry Baryshkov
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2022-09-24 9:43 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
Historically HDMI PHY device tree nodes used the hdmi-phy@ names.
Replace them with generic phy@ names.
While there is no such requirement in the DT schema, it's worth doing
that because:
1) The recent qcom DT files already use just phy@ for most of PHY nodes
2) The recommended list from devicetree specs mentions
usb-phy/ethernet-phy, but not <anything>-phy, so I'd think that those
two are mostly for backwards compatibility.
3) I liked the example of sc7280 which switched all MDSS PHYs to just
phy@ (this includes DSI PHY, eDP PHY and, by extension, the HDMI PHY).
Dmitry Baryshkov (2):
ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one
arm64: dts: qcom: msm8996: change HDMI PHY node name to generic one
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
--
2.35.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one
2022-09-24 9:43 [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Dmitry Baryshkov
@ 2022-09-24 9:43 ` Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
2022-09-24 9:43 ` [PATCH 2/2] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
2022-11-07 3:12 ` (subset) [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Bjorn Andersson
2 siblings, 2 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2022-09-24 9:43 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
Change HDMI PHY node names from custom 'hdmi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +-
arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 0322cb88d448..497c4012a65b 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -361,7 +361,7 @@ endpoint {
};
};
- hdmi-phy@4a00400 {
+ phy@4a00400 {
status = "okay";
core-vdda-supply = <&pm8921_hdmi_switch>;
diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 1b704c7ea890..58f239218639 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -1453,7 +1453,7 @@ hdmi_out: endpoint {
};
};
- hdmi_phy: hdmi-phy@4a00400 {
+ hdmi_phy: phy@4a00400 {
compatible = "qcom,hdmi-phy-8960";
reg = <0x4a00400 0x60>,
<0x4a00500 0x100>;
--
2.35.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] arm64: dts: qcom: msm8996: change HDMI PHY node name to generic one
2022-09-24 9:43 [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Dmitry Baryshkov
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
@ 2022-09-24 9:43 ` Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
2022-11-07 3:12 ` (subset) [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Bjorn Andersson
2 siblings, 2 replies; 8+ messages in thread
From: Dmitry Baryshkov @ 2022-09-24 9:43 UTC (permalink / raw)
To: Andy Gross, Bjorn Andersson, Konrad Dybcio, Rob Clark, Sean Paul,
Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
Change HDMI PHY node name from custom 'hdmi-phy' to the generic 'phy'.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index a7d0e5d68141..ed9863854904 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1144,7 +1144,7 @@ hdmi_in: endpoint {
};
};
- hdmi_phy: hdmi-phy@9a0600 {
+ hdmi_phy: phy@9a0600 {
#phy-cells = <0>;
compatible = "qcom,hdmi-phy-8996";
reg = <0x009a0600 0x1c4>,
--
2.35.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
@ 2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
1 sibling, 0 replies; 8+ messages in thread
From: Konrad Dybcio @ 2022-09-24 14:48 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Rob Clark,
Sean Paul, Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
On 24.09.2022 11:43, Dmitry Baryshkov wrote:
> Change HDMI PHY node names from custom 'hdmi-phy' to the generic 'phy'.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +-
> arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> index 0322cb88d448..497c4012a65b 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> @@ -361,7 +361,7 @@ endpoint {
> };
> };
>
> - hdmi-phy@4a00400 {
> + phy@4a00400 {
> status = "okay";
>
> core-vdda-supply = <&pm8921_hdmi_switch>;
> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
> index 1b704c7ea890..58f239218639 100644
> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
> @@ -1453,7 +1453,7 @@ hdmi_out: endpoint {
> };
> };
>
> - hdmi_phy: hdmi-phy@4a00400 {
> + hdmi_phy: phy@4a00400 {
> compatible = "qcom,hdmi-phy-8960";
> reg = <0x4a00400 0x60>,
> <0x4a00500 0x100>;
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: msm8996: change HDMI PHY node name to generic one
2022-09-24 9:43 ` [PATCH 2/2] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
@ 2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
1 sibling, 0 replies; 8+ messages in thread
From: Konrad Dybcio @ 2022-09-24 14:48 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Rob Clark,
Sean Paul, Abhinav Kumar, Rob Herring, Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
On 24.09.2022 11:43, Dmitry Baryshkov wrote:
> Change HDMI PHY node name from custom 'hdmi-phy' to the generic 'phy'.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Konrad
> arch/arm64/boot/dts/qcom/msm8996.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> index a7d0e5d68141..ed9863854904 100644
> --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
> @@ -1144,7 +1144,7 @@ hdmi_in: endpoint {
> };
> };
>
> - hdmi_phy: hdmi-phy@9a0600 {
> + hdmi_phy: phy@9a0600 {
> #phy-cells = <0>;
> compatible = "qcom,hdmi-phy-8996";
> reg = <0x009a0600 0x1c4>,
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
@ 2022-09-29 9:36 ` Krzysztof Kozlowski
1 sibling, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-29 9:36 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
On 24/09/2022 11:43, Dmitry Baryshkov wrote:
> Change HDMI PHY node names from custom 'hdmi-phy' to the generic 'phy'.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2] arm64: dts: qcom: msm8996: change HDMI PHY node name to generic one
2022-09-24 9:43 ` [PATCH 2/2] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
@ 2022-09-29 9:36 ` Krzysztof Kozlowski
1 sibling, 0 replies; 8+ messages in thread
From: Krzysztof Kozlowski @ 2022-09-29 9:36 UTC (permalink / raw)
To: Dmitry Baryshkov, Andy Gross, Bjorn Andersson, Konrad Dybcio,
Rob Clark, Sean Paul, Abhinav Kumar, Rob Herring,
Krzysztof Kozlowski
Cc: devicetree, David Airlie, linux-arm-msm, dri-devel, Stephen Boyd,
freedreno
On 24/09/2022 11:43, Dmitry Baryshkov wrote:
> Change HDMI PHY node name from custom 'hdmi-phy' to the generic 'phy'.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: (subset) [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes
2022-09-24 9:43 [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Dmitry Baryshkov
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
2022-09-24 9:43 ` [PATCH 2/2] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
@ 2022-11-07 3:12 ` Bjorn Andersson
2 siblings, 0 replies; 8+ messages in thread
From: Bjorn Andersson @ 2022-11-07 3:12 UTC (permalink / raw)
To: krzysztof.kozlowski+dt, dmitry.baryshkov, sean, Rob Herring,
quic_abhinavk, konrad.dybcio, robdclark, Andy Gross
Cc: devicetree, airlied, linux-arm-msm, dri-devel, swboyd, freedreno
On Sat, 24 Sep 2022 12:43:45 +0300, Dmitry Baryshkov wrote:
> Historically HDMI PHY device tree nodes used the hdmi-phy@ names.
> Replace them with generic phy@ names.
>
> While there is no such requirement in the DT schema, it's worth doing
> that because:
>
> 1) The recent qcom DT files already use just phy@ for most of PHY nodes
>
> [...]
Applied, thanks!
[1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one
commit: 5743efe0e73e4e1c8d042e982e31bb8145e35baf
Best regards,
--
Bjorn Andersson <andersson@kernel.org>
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-11-07 3:12 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-09-24 9:43 [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Dmitry Baryshkov
2022-09-24 9:43 ` [PATCH 1/2] ARM: dts: qcom-apq8064: change HDMI PHY node name to generic one Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
2022-09-24 9:43 ` [PATCH 2/2] arm64: dts: qcom: msm8996: " Dmitry Baryshkov
2022-09-24 14:48 ` Konrad Dybcio
2022-09-29 9:36 ` Krzysztof Kozlowski
2022-11-07 3:12 ` (subset) [PATCH 0/2] arm: dts: qcom: rename HDMI PHY nodes Bjorn Andersson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).