dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: Angelo Ribeiro <Angelo.Ribeiro@synopsys.com>,
	yannick.fertre@st.com, philippe.cornu@st.com,
	benjamin.gaignard@st.com, airlied@linux.ie, daniel@ffwll.ch,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	dri-devel@lists.freedesktop.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, pop.adrian61@gmail.com
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
	Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>
Subject: Re: [PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs
Date: Mon, 7 Sep 2020 10:09:29 +0200	[thread overview]
Message-ID: <5ecbb66f-1f65-d4c4-3593-49c537378efe@baylibre.com> (raw)
In-Reply-To: <a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com>

Hi,

On 06/04/2020 15:49, Angelo Ribeiro wrote:
> Add support for the video pattern generator (VPG) BER pattern mode and
> configuration in runtime.
> 
> This enables using the debugfs interface to manipulate the VPG after
> the pipeline is set.
> Also, enables the usage of the VPG BER pattern.
> 
> Changes in v2:
>   - Added VID_MODE_VPG_MODE
>   - Solved incompatible return type on __get and __set
> 
> Reported-by: kbuild test robot <lkp@intel.com>
> Reported-by: Adrian Pop <pop.adrian61@gmail.com>
> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> Cc: Joao Pinto <jpinto@synopsys.com>
> Cc: Jose Abreu <jose.abreu@synopsys.com>
> Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 98 ++++++++++++++++++++++++---
>  1 file changed, 90 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index b18351b..9de3645 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -91,6 +91,7 @@
>  #define VID_MODE_TYPE_BURST			0x2
>  #define VID_MODE_TYPE_MASK			0x3
>  #define VID_MODE_VPG_ENABLE		BIT(16)
> +#define VID_MODE_VPG_MODE		BIT(20)
>  #define VID_MODE_VPG_HORIZONTAL		BIT(24)
>  
>  #define DSI_VID_PKT_SIZE		0x3c
> @@ -221,6 +222,21 @@
>  #define PHY_STATUS_TIMEOUT_US		10000
>  #define CMD_PKT_STATUS_TIMEOUT_US	20000
>  
> +#ifdef CONFIG_DEBUG_FS
> +#define VPG_DEFS(name, dsi) \
> +	((void __force *)&((*dsi).vpg_defs.name))
> +
> +#define REGISTER(name, mask, dsi) \
> +	{ #name, VPG_DEFS(name, dsi), mask, dsi }
> +
> +struct debugfs_entries {
> +	const char				*name;
> +	bool					*reg;
> +	u32					mask;
> +	struct dw_mipi_dsi			*dsi;
> +};
> +#endif /* CONFIG_DEBUG_FS */
> +
>  struct dw_mipi_dsi {
>  	struct drm_bridge bridge;
>  	struct mipi_dsi_host dsi_host;
> @@ -238,9 +254,12 @@ struct dw_mipi_dsi {
>  
>  #ifdef CONFIG_DEBUG_FS
>  	struct dentry *debugfs;
> -
> -	bool vpg;
> -	bool vpg_horizontal;
> +	struct debugfs_entries *debugfs_vpg;
> +	struct {
> +		bool vpg;
> +		bool vpg_horizontal;
> +		bool vpg_ber_pattern;
> +	} vpg_defs;
>  #endif /* CONFIG_DEBUG_FS */
>  
>  	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
> @@ -530,9 +549,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
>  		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
>  
>  #ifdef CONFIG_DEBUG_FS
> -	if (dsi->vpg) {
> +	if (dsi->vpg_defs.vpg) {
>  		val |= VID_MODE_VPG_ENABLE;
> -		val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
> +		val |= dsi->vpg_defs.vpg_horizontal ?
> +		       VID_MODE_VPG_HORIZONTAL : 0;
> +		val |= dsi->vpg_defs.vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
>  	}
>  #endif /* CONFIG_DEBUG_FS */
>  
> @@ -961,6 +982,68 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
>  
>  #ifdef CONFIG_DEBUG_FS
>  
> +int dw_mipi_dsi_debugfs_write(void *data, u64 val)
> +{
> +	struct debugfs_entries *vpg = data;
> +	struct dw_mipi_dsi *dsi;
> +	u32 mode_cfg;
> +
> +	if (!vpg)
> +		return -ENODEV;
> +
> +	dsi = vpg->dsi;
> +
> +	*vpg->reg = (bool)val;
> +
> +	mode_cfg = dsi_read(dsi, DSI_VID_MODE_CFG);
> +
> +	if (*vpg->reg)
> +		mode_cfg |= vpg->mask;
> +	else
> +		mode_cfg &= ~vpg->mask;
> +
> +	dsi_write(dsi, DSI_VID_MODE_CFG, mode_cfg);
> +
> +	return 0;
> +}
> +
> +int dw_mipi_dsi_debugfs_show(void *data, u64 *val)
> +{
> +	struct debugfs_entries *vpg = data;
> +
> +	if (!vpg)
> +		return -ENODEV;
> +
> +	*val = *vpg->reg;
> +
> +	return 0;
> +}
> +
> +DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, dw_mipi_dsi_debugfs_show,
> +			 dw_mipi_dsi_debugfs_write, "%llu\n");
> +
> +static void debugfs_create_files(void *data)
> +{
> +	struct dw_mipi_dsi *dsi = data;
> +	struct debugfs_entries debugfs[] = {
> +		REGISTER(vpg, VID_MODE_VPG_ENABLE, dsi),
> +		REGISTER(vpg_horizontal, VID_MODE_VPG_HORIZONTAL, dsi),
> +		REGISTER(vpg_ber_pattern, VID_MODE_VPG_MODE, dsi),
> +	};
> +	int i;
> +
> +	dsi->debugfs_vpg = kmalloc(sizeof(debugfs), GFP_KERNEL);
> +	if (!dsi->debugfs_vpg)
> +		return;
> +
> +	memcpy(dsi->debugfs_vpg, debugfs, sizeof(debugfs));
> +
> +	for (i = 0; i < ARRAY_SIZE(debugfs); i++)
> +		debugfs_create_file(dsi->debugfs_vpg[i].name, 0644,
> +				    dsi->debugfs, &dsi->debugfs_vpg[i],
> +				    &fops_x32);
> +}
> +
>  static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>  {
>  	dsi->debugfs = debugfs_create_dir(dev_name(dsi->dev), NULL);
> @@ -969,14 +1052,13 @@ static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
>  		return;
>  	}
>  
> -	debugfs_create_bool("vpg", 0660, dsi->debugfs, &dsi->vpg);
> -	debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs,
> -			    &dsi->vpg_horizontal);
> +	debugfs_create_files(dsi);
>  }
>  
>  static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
>  {
>  	debugfs_remove_recursive(dsi->debugfs);
> +	kfree(dsi->debugfs_vpg);
>  }
>  
>  #else
> 

Acked-by: Neil Armstrong <narmstrong@baylibre.com>

Applying to drm-misc-next

Thanks,
Neil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

      parent reply	other threads:[~2020-09-07  8:09 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-06 13:49 [PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs Angelo Ribeiro
2020-04-06 17:45 ` Adrian Pop
2020-04-07  6:58   ` Adrian Pop
2020-04-07 16:38     ` Angelo Ribeiro
2020-06-24 15:35 ` Yannick FERTRE
2020-07-08 17:08   ` Angelo Ribeiro
2020-07-08 20:29     ` Neil Armstrong
2020-07-09  7:56     ` Philippe CORNU
2020-07-09  8:51       ` Angelo Ribeiro
2020-09-07  8:09 ` Neil Armstrong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5ecbb66f-1f65-d4c4-3593-49c537378efe@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=Angelo.Ribeiro@synopsys.com \
    --cc=Gustavo.Pimentel@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@st.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=philippe.cornu@st.com \
    --cc=pop.adrian61@gmail.com \
    --cc=yannick.fertre@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).