dri-devel.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: Angelo Ribeiro <Angelo.Ribeiro@synopsys.com>
To: yannick.fertre@st.com, philippe.cornu@st.com,
	benjamin.gaignard@st.com, airlied@linux.ie, daniel@ffwll.ch,
	mcoquelin.stm32@gmail.com, alexandre.torgue@st.com,
	dri-devel@lists.freedesktop.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, pop.adrian61@gmail.com
Cc: Jose Abreu <Jose.Abreu@synopsys.com>,
	Gustavo Pimentel <Gustavo.Pimentel@synopsys.com>,
	Joao Pinto <Joao.Pinto@synopsys.com>,
	Angelo Ribeiro <Angelo.Ribeiro@synopsys.com>
Subject: [PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs
Date: Mon,  6 Apr 2020 15:49:03 +0200	[thread overview]
Message-ID: <a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com> (raw)

Add support for the video pattern generator (VPG) BER pattern mode and
configuration in runtime.

This enables using the debugfs interface to manipulate the VPG after
the pipeline is set.
Also, enables the usage of the VPG BER pattern.

Changes in v2:
  - Added VID_MODE_VPG_MODE
  - Solved incompatible return type on __get and __set

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Adrian Pop <pop.adrian61@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jose Abreu <jose.abreu@synopsys.com>
Signed-off-by: Angelo Ribeiro <angelo.ribeiro@synopsys.com>
---
 drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 98 ++++++++++++++++++++++++---
 1 file changed, 90 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index b18351b..9de3645 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -91,6 +91,7 @@
 #define VID_MODE_TYPE_BURST			0x2
 #define VID_MODE_TYPE_MASK			0x3
 #define VID_MODE_VPG_ENABLE		BIT(16)
+#define VID_MODE_VPG_MODE		BIT(20)
 #define VID_MODE_VPG_HORIZONTAL		BIT(24)
 
 #define DSI_VID_PKT_SIZE		0x3c
@@ -221,6 +222,21 @@
 #define PHY_STATUS_TIMEOUT_US		10000
 #define CMD_PKT_STATUS_TIMEOUT_US	20000
 
+#ifdef CONFIG_DEBUG_FS
+#define VPG_DEFS(name, dsi) \
+	((void __force *)&((*dsi).vpg_defs.name))
+
+#define REGISTER(name, mask, dsi) \
+	{ #name, VPG_DEFS(name, dsi), mask, dsi }
+
+struct debugfs_entries {
+	const char				*name;
+	bool					*reg;
+	u32					mask;
+	struct dw_mipi_dsi			*dsi;
+};
+#endif /* CONFIG_DEBUG_FS */
+
 struct dw_mipi_dsi {
 	struct drm_bridge bridge;
 	struct mipi_dsi_host dsi_host;
@@ -238,9 +254,12 @@ struct dw_mipi_dsi {
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *debugfs;
-
-	bool vpg;
-	bool vpg_horizontal;
+	struct debugfs_entries *debugfs_vpg;
+	struct {
+		bool vpg;
+		bool vpg_horizontal;
+		bool vpg_ber_pattern;
+	} vpg_defs;
 #endif /* CONFIG_DEBUG_FS */
 
 	struct dw_mipi_dsi *master; /* dual-dsi master ptr */
@@ -530,9 +549,11 @@ static void dw_mipi_dsi_video_mode_config(struct dw_mipi_dsi *dsi)
 		val |= VID_MODE_TYPE_NON_BURST_SYNC_EVENTS;
 
 #ifdef CONFIG_DEBUG_FS
-	if (dsi->vpg) {
+	if (dsi->vpg_defs.vpg) {
 		val |= VID_MODE_VPG_ENABLE;
-		val |= dsi->vpg_horizontal ? VID_MODE_VPG_HORIZONTAL : 0;
+		val |= dsi->vpg_defs.vpg_horizontal ?
+		       VID_MODE_VPG_HORIZONTAL : 0;
+		val |= dsi->vpg_defs.vpg_ber_pattern ? VID_MODE_VPG_MODE : 0;
 	}
 #endif /* CONFIG_DEBUG_FS */
 
@@ -961,6 +982,68 @@ static const struct drm_bridge_funcs dw_mipi_dsi_bridge_funcs = {
 
 #ifdef CONFIG_DEBUG_FS
 
+int dw_mipi_dsi_debugfs_write(void *data, u64 val)
+{
+	struct debugfs_entries *vpg = data;
+	struct dw_mipi_dsi *dsi;
+	u32 mode_cfg;
+
+	if (!vpg)
+		return -ENODEV;
+
+	dsi = vpg->dsi;
+
+	*vpg->reg = (bool)val;
+
+	mode_cfg = dsi_read(dsi, DSI_VID_MODE_CFG);
+
+	if (*vpg->reg)
+		mode_cfg |= vpg->mask;
+	else
+		mode_cfg &= ~vpg->mask;
+
+	dsi_write(dsi, DSI_VID_MODE_CFG, mode_cfg);
+
+	return 0;
+}
+
+int dw_mipi_dsi_debugfs_show(void *data, u64 *val)
+{
+	struct debugfs_entries *vpg = data;
+
+	if (!vpg)
+		return -ENODEV;
+
+	*val = *vpg->reg;
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, dw_mipi_dsi_debugfs_show,
+			 dw_mipi_dsi_debugfs_write, "%llu\n");
+
+static void debugfs_create_files(void *data)
+{
+	struct dw_mipi_dsi *dsi = data;
+	struct debugfs_entries debugfs[] = {
+		REGISTER(vpg, VID_MODE_VPG_ENABLE, dsi),
+		REGISTER(vpg_horizontal, VID_MODE_VPG_HORIZONTAL, dsi),
+		REGISTER(vpg_ber_pattern, VID_MODE_VPG_MODE, dsi),
+	};
+	int i;
+
+	dsi->debugfs_vpg = kmalloc(sizeof(debugfs), GFP_KERNEL);
+	if (!dsi->debugfs_vpg)
+		return;
+
+	memcpy(dsi->debugfs_vpg, debugfs, sizeof(debugfs));
+
+	for (i = 0; i < ARRAY_SIZE(debugfs); i++)
+		debugfs_create_file(dsi->debugfs_vpg[i].name, 0644,
+				    dsi->debugfs, &dsi->debugfs_vpg[i],
+				    &fops_x32);
+}
+
 static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
 {
 	dsi->debugfs = debugfs_create_dir(dev_name(dsi->dev), NULL);
@@ -969,14 +1052,13 @@ static void dw_mipi_dsi_debugfs_init(struct dw_mipi_dsi *dsi)
 		return;
 	}
 
-	debugfs_create_bool("vpg", 0660, dsi->debugfs, &dsi->vpg);
-	debugfs_create_bool("vpg_horizontal", 0660, dsi->debugfs,
-			    &dsi->vpg_horizontal);
+	debugfs_create_files(dsi);
 }
 
 static void dw_mipi_dsi_debugfs_remove(struct dw_mipi_dsi *dsi)
 {
 	debugfs_remove_recursive(dsi->debugfs);
+	kfree(dsi->debugfs_vpg);
 }
 
 #else
-- 
2.7.4

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-04-07  8:10 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-06 13:49 Angelo Ribeiro [this message]
2020-04-06 17:45 ` [PATCH v2] drm/bridge: dw-mipi-dsi.c: Add VPG runtime config through debugfs Adrian Pop
2020-04-07  6:58   ` Adrian Pop
2020-04-07 16:38     ` Angelo Ribeiro
2020-06-24 15:35 ` Yannick FERTRE
2020-07-08 17:08   ` Angelo Ribeiro
2020-07-08 20:29     ` Neil Armstrong
2020-07-09  7:56     ` Philippe CORNU
2020-07-09  8:51       ` Angelo Ribeiro
2020-09-07  8:09 ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a809feb7d7153a92e323416f744f1565e995da01.1586180592.git.angelo.ribeiro@synopsys.com \
    --to=angelo.ribeiro@synopsys.com \
    --cc=Gustavo.Pimentel@synopsys.com \
    --cc=Joao.Pinto@synopsys.com \
    --cc=Jose.Abreu@synopsys.com \
    --cc=airlied@linux.ie \
    --cc=alexandre.torgue@st.com \
    --cc=benjamin.gaignard@st.com \
    --cc=daniel@ffwll.ch \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=philippe.cornu@st.com \
    --cc=pop.adrian61@gmail.com \
    --cc=yannick.fertre@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).