* [PATCH] drm/exynos: dsi: fix workaround for the legacy clock name
[not found] <CGME20200220123022eucas1p21d015e2880680ae1c16e4b2a1d0ebb18@eucas1p2.samsung.com>
@ 2020-02-20 12:30 ` Marek Szyprowski
2020-02-27 8:58 ` Andrzej Hajda
0 siblings, 1 reply; 2+ messages in thread
From: Marek Szyprowski @ 2020-02-20 12:30 UTC (permalink / raw)
To: dri-devel, linux-samsung-soc
Cc: Andrzej Hajda, Bartlomiej Zolnierkiewicz, Seung-Woo Kim,
Marek Szyprowski
Writing to the built-in strings arrays doesn't work if driver is loaded
as kernel module. This is also considered as a bad pattern. Fix this by
adding a call to clk_get() with legacy clock name. This fixes following
kernel oops if driver is loaded as module:
Unable to handle kernel paging request at virtual address bf047978
pgd = (ptrval)
[bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
Internal error: Oops: 80f [#1] SMP ARM
Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
videodev: Linux video capture interface: v2.00
Hardware name: Samsung Exynos (Flattened Device Tree)
PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
...
Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
...
[<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
[<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
[<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
[<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
[<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
[<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
[<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
[<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
[<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
[<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
[<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
[<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
[<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
[<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0xd979bfa8 to 0xd979bff0)
...
---[ end trace db16efe05faab470 ]---
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index 33628d85edad..08a8ce3f499c 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -1787,9 +1787,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
if (IS_ERR(dsi->clks[i])) {
if (strcmp(clk_names[i], "sclk_mipi") == 0) {
- strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
- i--;
- continue;
+ dsi->clks[i] = devm_clk_get(dev,
+ OLD_SCLK_MIPI_CLK_NAME);
+ if (!IS_ERR(dsi->clks[i]))
+ continue;
}
dev_info(dev, "failed to get the clock: %s\n",
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] drm/exynos: dsi: fix workaround for the legacy clock name
2020-02-20 12:30 ` [PATCH] drm/exynos: dsi: fix workaround for the legacy clock name Marek Szyprowski
@ 2020-02-27 8:58 ` Andrzej Hajda
0 siblings, 0 replies; 2+ messages in thread
From: Andrzej Hajda @ 2020-02-27 8:58 UTC (permalink / raw)
To: Marek Szyprowski, dri-devel, linux-samsung-soc
Cc: Seung-Woo Kim, Bartlomiej Zolnierkiewicz
On 20.02.2020 13:30, Marek Szyprowski wrote:
> Writing to the built-in strings arrays doesn't work if driver is loaded
> as kernel module. This is also considered as a bad pattern. Fix this by
> adding a call to clk_get() with legacy clock name. This fixes following
> kernel oops if driver is loaded as module:
>
> Unable to handle kernel paging request at virtual address bf047978
> pgd = (ptrval)
> [bf047978] *pgd=59344811, *pte=5903c6df, *ppte=5903c65f
> Internal error: Oops: 80f [#1] SMP ARM
> Modules linked in: mc exynosdrm(+) analogix_dp rtc_s3c exynos_ppmu i2c_gpio
> CPU: 1 PID: 212 Comm: systemd-udevd Not tainted 5.6.0-rc2-next-20200219 #326
> videodev: Linux video capture interface: v2.00
> Hardware name: Samsung Exynos (Flattened Device Tree)
> PC is at exynos_dsi_probe+0x1f0/0x384 [exynosdrm]
> LR is at exynos_dsi_probe+0x1dc/0x384 [exynosdrm]
> ...
> Process systemd-udevd (pid: 212, stack limit = 0x(ptrval))
> ...
> [<bf03cf14>] (exynos_dsi_probe [exynosdrm]) from [<c09b1ca0>] (platform_drv_probe+0x6c/0xa4)
> [<c09b1ca0>] (platform_drv_probe) from [<c09afcb8>] (really_probe+0x210/0x350)
> [<c09afcb8>] (really_probe) from [<c09aff74>] (driver_probe_device+0x60/0x1a0)
> [<c09aff74>] (driver_probe_device) from [<c09b0254>] (device_driver_attach+0x58/0x60)
> [<c09b0254>] (device_driver_attach) from [<c09b02dc>] (__driver_attach+0x80/0xbc)
> [<c09b02dc>] (__driver_attach) from [<c09ade00>] (bus_for_each_dev+0x68/0xb4)
> [<c09ade00>] (bus_for_each_dev) from [<c09aefd8>] (bus_add_driver+0x130/0x1e8)
> [<c09aefd8>] (bus_add_driver) from [<c09b0d64>] (driver_register+0x78/0x110)
> [<c09b0d64>] (driver_register) from [<bf038558>] (exynos_drm_init+0xe8/0x11c [exynosdrm])
> [<bf038558>] (exynos_drm_init [exynosdrm]) from [<c0302fa8>] (do_one_initcall+0x50/0x220)
> [<c0302fa8>] (do_one_initcall) from [<c03dd02c>] (do_init_module+0x60/0x210)
> [<c03dd02c>] (do_init_module) from [<c03dbf44>] (load_module+0x1c0c/0x2310)
> [<c03dbf44>] (load_module) from [<c03dc85c>] (sys_finit_module+0xac/0xbc)
> [<c03dc85c>] (sys_finit_module) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
> Exception stack(0xd979bfa8 to 0xd979bff0)
> ...
> ---[ end trace db16efe05faab470 ]---
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Why did it worked with build-in driver remains mystery.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
--
Regards
Andrzej
> ---
> drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> index 33628d85edad..08a8ce3f499c 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> @@ -1787,9 +1787,10 @@ static int exynos_dsi_probe(struct platform_device *pdev)
> dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
> if (IS_ERR(dsi->clks[i])) {
> if (strcmp(clk_names[i], "sclk_mipi") == 0) {
> - strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
> - i--;
> - continue;
> + dsi->clks[i] = devm_clk_get(dev,
> + OLD_SCLK_MIPI_CLK_NAME);
> + if (!IS_ERR(dsi->clks[i]))
> + continue;
> }
>
> dev_info(dev, "failed to get the clock: %s\n",
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-27 8:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200220123022eucas1p21d015e2880680ae1c16e4b2a1d0ebb18@eucas1p2.samsung.com>
2020-02-20 12:30 ` [PATCH] drm/exynos: dsi: fix workaround for the legacy clock name Marek Szyprowski
2020-02-27 8:58 ` Andrzej Hajda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).