* [PATCH v3] libdrm: modetest: Allow selecting modes by index
@ 2019-06-27 21:37 John Stultz
2020-01-21 18:42 ` Emil Velikov
0 siblings, 1 reply; 2+ messages in thread
From: John Stultz @ 2019-06-27 21:37 UTC (permalink / raw)
To: dri-devel; +Cc: Rob Clark, Bjorn Andersson
Often there are many similar modes, which cannot be selected
via modetest due to its simple string matching.
This change adds a mode index in the display output, which can
then be used to specify a specific modeline to be set.
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
v2: Reworked mode_str check per Ilia's suggestion
v3: Added index < 0 check per Ilia's suggestion
---
tests/modetest/modetest.c | 23 +++++++++++++++++------
1 file changed, 17 insertions(+), 6 deletions(-)
diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
index 9c85c07b..5e1b623a 100644
--- a/tests/modetest/modetest.c
+++ b/tests/modetest/modetest.c
@@ -204,9 +204,10 @@ static void dump_encoders(struct device *dev)
printf("\n");
}
-static void dump_mode(drmModeModeInfo *mode)
+static void dump_mode(drmModeModeInfo *mode, int index)
{
- printf(" %s %d %d %d %d %d %d %d %d %d %d",
+ printf(" #%i %s %d %d %d %d %d %d %d %d %d %d",
+ index,
mode->name,
mode->vrefresh,
mode->hdisplay,
@@ -443,10 +444,10 @@ static void dump_connectors(struct device *dev)
if (connector->count_modes) {
printf(" modes:\n");
- printf("\tname refresh (Hz) hdisp hss hse htot vdisp "
+ printf("\tindex name refresh (Hz) hdisp hss hse htot vdisp "
"vss vse vtot)\n");
for (j = 0; j < connector->count_modes; j++)
- dump_mode(&connector->modes[j]);
+ dump_mode(&connector->modes[j], j);
}
if (_connector->props) {
@@ -478,7 +479,7 @@ static void dump_crtcs(struct device *dev)
crtc->buffer_id,
crtc->x, crtc->y,
crtc->width, crtc->height);
- dump_mode(&crtc->mode);
+ dump_mode(&crtc->mode, 0);
if (_crtc->props) {
printf(" props:\n");
@@ -829,6 +830,16 @@ connector_find_mode(struct device *dev, uint32_t con_id, const char *mode_str,
if (!connector || !connector->count_modes)
return NULL;
+ /* Pick by Index */
+ if (mode_str[0] == '#') {
+ int index = atoi(mode_str + 1);
+
+ if (index >= connector->count_modes || index < 0)
+ return NULL;
+ return &connector->modes[index];
+ }
+
+ /* Pick by Name */
for (i = 0; i < connector->count_modes; i++) {
mode = &connector->modes[i];
if (!strcmp(mode->name, mode_str)) {
@@ -1752,7 +1763,7 @@ static void usage(char *name)
fprintf(stderr, "\n Test options:\n\n");
fprintf(stderr, "\t-P <plane_id>@<crtc_id>:<w>x<h>[+<x>+<y>][*<scale>][@<format>]\tset a plane\n");
- fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:<mode>[-<vrefresh>][@<format>]\tset a mode\n");
+ fprintf(stderr, "\t-s <connector_id>[,<connector_id>][@<crtc_id>]:[#<mode index>]<mode>[-<vrefresh>][@<format>]\tset a mode\n");
fprintf(stderr, "\t-C\ttest hw cursor\n");
fprintf(stderr, "\t-v\ttest vsynced page flipping\n");
fprintf(stderr, "\t-w <obj_id>:<prop_name>:<value>\tset property\n");
--
2.17.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3] libdrm: modetest: Allow selecting modes by index
2019-06-27 21:37 [PATCH v3] libdrm: modetest: Allow selecting modes by index John Stultz
@ 2020-01-21 18:42 ` Emil Velikov
0 siblings, 0 replies; 2+ messages in thread
From: Emil Velikov @ 2020-01-21 18:42 UTC (permalink / raw)
To: John Stultz; +Cc: Rob Clark, dri-devel, Bjorn Andersson
On Thu, 27 Jun 2019 at 22:37, John Stultz <john.stultz@linaro.org> wrote:
>
> Often there are many similar modes, which cannot be selected
> via modetest due to its simple string matching.
>
> This change adds a mode index in the display output, which can
> then be used to specify a specific modeline to be set.
>
> Cc: Ilia Mirkin <imirkin@alum.mit.edu>
> Cc: Rob Clark <robdclark@chromium.org>
> Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
> Cc: Sumit Semwal <sumit.semwal@linaro.org>
> Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> v2: Reworked mode_str check per Ilia's suggestion
> v3: Added index < 0 check per Ilia's suggestion
> ---
> tests/modetest/modetest.c | 23 +++++++++++++++++------
> 1 file changed, 17 insertions(+), 6 deletions(-)
>
> diff --git a/tests/modetest/modetest.c b/tests/modetest/modetest.c
> index 9c85c07b..5e1b623a 100644
> --- a/tests/modetest/modetest.c
> +++ b/tests/modetest/modetest.c
> @@ -204,9 +204,10 @@ static void dump_encoders(struct device *dev)
> printf("\n");
> }
>
> -static void dump_mode(drmModeModeInfo *mode)
> +static void dump_mode(drmModeModeInfo *mode, int index)
> {
> - printf(" %s %d %d %d %d %d %d %d %d %d %d",
> + printf(" #%i %s %d %d %d %d %d %d %d %d %d %d",
> + index,
> mode->name,
> mode->vrefresh,
> mode->hdisplay,
Thanks John.
Resolved a minor conflict in the above hunk and pushed to master.
Emil
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-01-21 18:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-27 21:37 [PATCH v3] libdrm: modetest: Allow selecting modes by index John Stultz
2020-01-21 18:42 ` Emil Velikov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).