Re: [PATCH] gpu/drm/radeon: Fix typo in comments

[Alex Deucher <alexdeucher@gmail.com>]

Applied.  Thanks!

Alex

On Thu, Jul 29, 2021 at 4:21 AM Cai Huoqing <caihuoqing@baidu.com> wrote:
>
> Remove the repeated word 'the' from comments
>
> Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
> ---
>  drivers/gpu/drm/radeon/atombios.h      | 4 ++--
>  drivers/gpu/drm/radeon/r300_reg.h      | 2 +-
>  drivers/gpu/drm/radeon/radeon_device.c | 2 +-
>  drivers/gpu/drm/radeon/radeon_fence.c  | 2 +-
>  drivers/gpu/drm/radeon/radeon_vm.c     | 2 +-
>  5 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
> index 4b86e8b45009..83e8b8547f9b 100644
> --- a/drivers/gpu/drm/radeon/atombios.h
> +++ b/drivers/gpu/drm/radeon/atombios.h
> @@ -2802,8 +2802,8 @@ ucMaxNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of  t
>  ucMinNBVoltageHigh:     Voltage regulator dependent PWM value. High 8 bits of the value for the min voltage.Set this one to 0x00 if VC without PWM or no VC at all.
>
>
> -usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
> -usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
> +usInterNBVoltageLow:    Voltage regulator dependent PWM value. The value makes the voltage >=Min NB voltage but <=InterNBVoltageHigh. Set this to 0x0000 if VC without PWM or no VC at all.
> +usInterNBVoltageHigh:   Voltage regulator dependent PWM value. The value makes the voltage >=InterNBVoltageLow but <=Max NB voltage.Set this to 0x0000 if VC without PWM or no VC at all.
>  */
>
>
> diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
> index 00c0d2ba22d3..60d5413bafa1 100644
> --- a/drivers/gpu/drm/radeon/r300_reg.h
> +++ b/drivers/gpu/drm/radeon/r300_reg.h
> @@ -353,7 +353,7 @@
>  #       define R300_PVS_CNTL_1_PROGRAM_START_SHIFT   0
>  #       define R300_PVS_CNTL_1_POS_END_SHIFT         10
>  #       define R300_PVS_CNTL_1_PROGRAM_END_SHIFT     20
> -/* Addresses are relative the the vertex program parameters area. */
> +/* Addresses are relative the vertex program parameters area. */
>  #define R300_VAP_PVS_CNTL_2                 0x22D4
>  #       define R300_PVS_CNTL_2_PARAM_OFFSET_SHIFT 0
>  #       define R300_PVS_CNTL_2_PARAM_COUNT_SHIFT  16
> diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
> index cec03238e14d..ac8c3251b616 100644
> --- a/drivers/gpu/drm/radeon/radeon_device.c
> +++ b/drivers/gpu/drm/radeon/radeon_device.c
> @@ -406,7 +406,7 @@ void radeon_doorbell_free(struct radeon_device *rdev, u32 doorbell)
>
>  /*
>   * radeon_wb_*()
> - * Writeback is the the method by which the the GPU updates special pages
> + * Writeback is the method by which the GPU updates special pages
>   * in memory with the status of certain GPU events (fences, ring pointers,
>   * etc.).
>   */
> diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
> index 18f2c2e0dfb3..e9c47ec28ade 100644
> --- a/drivers/gpu/drm/radeon/radeon_fence.c
> +++ b/drivers/gpu/drm/radeon/radeon_fence.c
> @@ -50,7 +50,7 @@
>   * for GPU/CPU synchronization.  When the fence is written,
>   * it is expected that all buffers associated with that fence
>   * are no longer in use by the associated ring on the GPU and
> - * that the the relevant GPU caches have been flushed.  Whether
> + * that the relevant GPU caches have been flushed.  Whether
>   * we use a scratch register or memory location depends on the asic
>   * and whether writeback is enabled.
>   */
> diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c
> index 36a38adaaea9..bb53016f3138 100644
> --- a/drivers/gpu/drm/radeon/radeon_vm.c
> +++ b/drivers/gpu/drm/radeon/radeon_vm.c
> @@ -41,7 +41,7 @@
>   * (uncached system pages).
>   * Each VM has an ID associated with it and there is a page table
>   * associated with each VMID.  When execting a command buffer,
> - * the kernel tells the the ring what VMID to use for that command
> + * the kernel tells the ring what VMID to use for that command
>   * buffer.  VMIDs are allocated dynamically as commands are submitted.
>   * The userspace drivers maintain their own address space and the kernel
>   * sets up their pages tables accordingly when they submit their
> --
> 2.25.1
>