[PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Geert Uytterhoeven]

        Hi all,

This patch series contains fixes and improvements for the XRGB888 to
monochrome conversion in the DRM core, and for its users.

This has been tested on an Adafruit FeatherWing 128x32 OLED, connected
to an OrangeCrab ECP5 FPGA board running a 64 MHz VexRiscv RISC-V
softcore, using a text console with 4x6, 7x14 and 8x8 fonts.

Thanks!

Geert Uytterhoeven (5):
  drm/format-helper: Rename drm_fb_xrgb8888_to_mono_reversed()
  drm/format-helper: Fix XRGB888 to monochrome conversion
  drm/ssd130x: Fix rectangle updates
  drm/ssd130x: Reduce temporary buffer sizes
  drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

 drivers/gpu/drm/drm_format_helper.c | 74 +++++++++++------------------
 drivers/gpu/drm/solomon/ssd130x.c   | 24 +++++++---
 drivers/gpu/drm/tiny/repaper.c      |  4 +-
 include/drm/drm_format_helper.h     |  5 +-
 4 files changed, 48 insertions(+), 59 deletions(-)

-- 
2.25.1

Gr{oetje,eeting}s,

						Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

[PATCH v2 1/5] drm/format-helper: Rename drm_fb_xrgb8888_to_mono_reversed()

[Geert Uytterhoeven]

There is no "reversed" handling in drm_fb_xrgb8888_to_mono_reversed():
the function just converts from color to grayscale, and reduces the
number of grayscale levels from 256 to 2 (i.e. brightness 0-127 is
mapped to 0, 128-255 to 1).  All "reversed" handling is done in the
repaper driver, where this function originated.

Hence make this clear by renaming drm_fb_xrgb8888_to_mono_reversed() to
drm_fb_xrgb8888_to_mono(), and documenting the black/white pixel
mapping.

Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2:
  - Add Acked-by, Reviewed-by,
  - Join 2 lines.
---
 drivers/gpu/drm/drm_format_helper.c | 31 ++++++++++++++---------------
 drivers/gpu/drm/solomon/ssd130x.c   |  2 +-
 drivers/gpu/drm/tiny/repaper.c      |  2 +-
 include/drm/drm_format_helper.h     |  5 ++---
 4 files changed, 19 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index bc0f49773868a9b0..5d9d0c695845f575 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -594,8 +594,8 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for
 }
 EXPORT_SYMBOL(drm_fb_blit_toio);
 
-static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned int pixels,
-					       unsigned int start_offset, unsigned int end_len)
+static void drm_fb_gray8_to_mono_line(u8 *dst, const u8 *src, unsigned int pixels,
+				      unsigned int start_offset, unsigned int end_len)
 {
 	unsigned int xb, i;
 
@@ -621,8 +621,8 @@ static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned
 }
 
 /**
- * drm_fb_xrgb8888_to_mono_reversed - Convert XRGB8888 to reversed monochrome
- * @dst: reversed monochrome destination buffer
+ * drm_fb_xrgb8888_to_mono - Convert XRGB8888 to monochrome
+ * @dst: monochrome destination buffer (0=black, 1=white)
  * @dst_pitch: Number of bytes between two consecutive scanlines within dst
  * @src: XRGB8888 source buffer
  * @fb: DRM framebuffer
@@ -633,10 +633,10 @@ static void drm_fb_gray8_to_mono_reversed_line(u8 *dst, const u8 *src, unsigned
  * and use this function to convert to the native format.
  *
  * This function uses drm_fb_xrgb8888_to_gray8() to convert to grayscale and
- * then the result is converted from grayscale to reversed monohrome.
+ * then the result is converted from grayscale to monochrome.
  */
-void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *vaddr,
-				      const struct drm_framebuffer *fb, const struct drm_rect *clip)
+void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *vaddr,
+			     const struct drm_framebuffer *fb, const struct drm_rect *clip)
 {
 	unsigned int linepixels = drm_rect_width(clip);
 	unsigned int lines = clip->y2 - clip->y1;
@@ -652,8 +652,8 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
 		return;
 
 	/*
-	 * The reversed mono destination buffer contains 1 bit per pixel
-	 * and destination scanlines have to be in multiple of 8 pixels.
+	 * The mono destination buffer contains 1 bit per pixel and
+	 * destination scanlines have to be in multiple of 8 pixels.
 	 */
 	if (!dst_pitch)
 		dst_pitch = DIV_ROUND_UP(linepixels, 8);
@@ -664,9 +664,9 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
 	 * The cma memory is write-combined so reads are uncached.
 	 * Speed up by fetching one line at a time.
 	 *
-	 * Also, format conversion from XR24 to reversed monochrome
-	 * are done line-by-line but are converted to 8-bit grayscale
-	 * as an intermediate step.
+	 * Also, format conversion from XR24 to monochrome are done
+	 * line-by-line but are converted to 8-bit grayscale as an
+	 * intermediate step.
 	 *
 	 * Allocate a buffer to be used for both copying from the cma
 	 * memory and to store the intermediate grayscale line pixels.
@@ -683,7 +683,7 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
 	 * are not aligned to multiple of 8.
 	 *
 	 * Calculate if the start and end pixels are not aligned and set the
-	 * offsets for the reversed mono line conversion function to adjust.
+	 * offsets for the mono line conversion function to adjust.
 	 */
 	start_offset = clip->x1 % 8;
 	end_len = clip->x2 % 8;
@@ -692,12 +692,11 @@ void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const v
 	for (y = 0; y < lines; y++) {
 		src32 = memcpy(src32, vaddr, len_src32);
 		drm_fb_xrgb8888_to_gray8_line(gray8, src32, linepixels);
-		drm_fb_gray8_to_mono_reversed_line(mono, gray8, dst_pitch,
-						   start_offset, end_len);
+		drm_fb_gray8_to_mono_line(mono, gray8, dst_pitch, start_offset, end_len);
 		vaddr += fb->pitches[0];
 		mono += dst_pitch;
 	}
 
 	kfree(src32);
 }
-EXPORT_SYMBOL(drm_fb_xrgb8888_to_mono_reversed);
+EXPORT_SYMBOL(drm_fb_xrgb8888_to_mono);
diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index d08d86ef07bcbe7f..caee851efd5726e7 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -458,7 +458,7 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 	if (!buf)
 		return -ENOMEM;
 
-	drm_fb_xrgb8888_to_mono_reversed(buf, 0, vmap, fb, rect);
+	drm_fb_xrgb8888_to_mono(buf, 0, vmap, fb, rect);
 
 	ssd130x_update_rect(ssd130x, buf, rect);
 
diff --git a/drivers/gpu/drm/tiny/repaper.c b/drivers/gpu/drm/tiny/repaper.c
index 37b6bb90e46e1fe8..a096fb8b83e99dc8 100644
--- a/drivers/gpu/drm/tiny/repaper.c
+++ b/drivers/gpu/drm/tiny/repaper.c
@@ -540,7 +540,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
 	if (ret)
 		goto out_free;
 
-	drm_fb_xrgb8888_to_mono_reversed(buf, 0, cma_obj->vaddr, fb, &clip);
+	drm_fb_xrgb8888_to_mono(buf, 0, cma_obj->vaddr, fb, &clip);
 
 	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
 
diff --git a/include/drm/drm_format_helper.h b/include/drm/drm_format_helper.h
index 0b0937c0b2f6324e..55145eca07828321 100644
--- a/include/drm/drm_format_helper.h
+++ b/include/drm/drm_format_helper.h
@@ -43,8 +43,7 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for
 		     const void *vmap, const struct drm_framebuffer *fb,
 		     const struct drm_rect *rect);
 
-void drm_fb_xrgb8888_to_mono_reversed(void *dst, unsigned int dst_pitch, const void *src,
-				      const struct drm_framebuffer *fb,
-				      const struct drm_rect *clip);
+void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *src,
+			     const struct drm_framebuffer *fb, const struct drm_rect *clip);
 
 #endif /* __LINUX_DRM_FORMAT_HELPER_H */
-- 
2.25.1

[PATCH v2 2/5] drm/format-helper: Fix XRGB888 to monochrome conversion

[Geert Uytterhoeven]

The conversion functions drm_fb_xrgb8888_to_mono() and
drm_fb_gray8_to_mono_line() do not behave correctly when the
horizontal boundaries of the clip rectangle are not multiples of 8:
  a. When x1 % 8 != 0, the calculated pitch is not correct,
  b. When x2 % 8 != 0, the pixel data for the last byte is wrong.

Simplify the code and fix (a) by:
  1. Removing start_offset, and always storing the first pixel in the
     first bit of the monochrome destination buffer.
     Drivers that require the first pixel in a byte to be located at an
     x-coordinate that is a multiple of 8 can always align the clip
     rectangle before calling drm_fb_xrgb8888_to_mono().
     Note that:
       - The ssd130x driver does not need the alignment, as the
	 monochrome buffer is a temporary format,
       - The repaper driver always updates the full screen, so the clip
	 rectangle is always aligned.
  2. Passing the number of pixels to drm_fb_gray8_to_mono_line(),
     instead of the number of bytes, and the number of pixels in the
     last byte.

Fix (b) by explicitly setting the target bit, instead of always setting
bit 7 and shifting the value in each loop iteration.

Remove the bogus pitch check, which operates on bytes instead of pixels,
and triggers when e.g. flashing the cursor on a text console with a font
that is 8 pixels wide.

Drop the confusing comment about scanlines, as a pitch in bytes always
contains a multiple of 8 pixels.

While at it, use the drm_rect_height() helper instead of open-coding the
same operation.

Update the comments accordingly.

Fixes: bcf8b616deb87941 ("drm/format-helper: Add drm_fb_xrgb8888_to_mono_reversed()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2:
  - Add Acked-by, Reviewed-by,
  - Use ">= 128" instead of "& BIT(7)" to increase readability.

I tried hard to fix this in small steps, but everything was no
intertangled that this turned out to be unfeasible.

Note that making these changes does not introduce regressions in the
ssd130x driver, as the latter is broken for x1 != 0 or y1 != 0 anyway.
---
 drivers/gpu/drm/drm_format_helper.c | 55 ++++++++++-------------------
 1 file changed, 18 insertions(+), 37 deletions(-)

diff --git a/drivers/gpu/drm/drm_format_helper.c b/drivers/gpu/drm/drm_format_helper.c
index 5d9d0c695845f575..e085f855a199013f 100644
--- a/drivers/gpu/drm/drm_format_helper.c
+++ b/drivers/gpu/drm/drm_format_helper.c
@@ -594,27 +594,16 @@ int drm_fb_blit_toio(void __iomem *dst, unsigned int dst_pitch, uint32_t dst_for
 }
 EXPORT_SYMBOL(drm_fb_blit_toio);
 
-static void drm_fb_gray8_to_mono_line(u8 *dst, const u8 *src, unsigned int pixels,
-				      unsigned int start_offset, unsigned int end_len)
-{
-	unsigned int xb, i;
-
-	for (xb = 0; xb < pixels; xb++) {
-		unsigned int start = 0, end = 8;
-		u8 byte = 0x00;
-
-		if (xb == 0 && start_offset)
-			start = start_offset;
 
-		if (xb == pixels - 1 && end_len)
-			end = end_len;
-
-		for (i = start; i < end; i++) {
-			unsigned int x = xb * 8 + i;
+static void drm_fb_gray8_to_mono_line(u8 *dst, const u8 *src, unsigned int pixels)
+{
+	while (pixels) {
+		unsigned int i, bits = min(pixels, 8U);
+		u8 byte = 0;
 
-			byte >>= 1;
-			if (src[x] >> 7)
-				byte |= BIT(7);
+		for (i = 0; i < bits; i++, pixels--) {
+			if (*src++ >= 128)
+				byte |= BIT(i);
 		}
 		*dst++ = byte;
 	}
@@ -634,16 +623,22 @@ static void drm_fb_gray8_to_mono_line(u8 *dst, const u8 *src, unsigned int pixel
  *
  * This function uses drm_fb_xrgb8888_to_gray8() to convert to grayscale and
  * then the result is converted from grayscale to monochrome.
+ *
+ * The first pixel (upper left corner of the clip rectangle) will be converted
+ * and copied to the first bit (LSB) in the first byte of the monochrome
+ * destination buffer.
+ * If the caller requires that the first pixel in a byte must be located at an
+ * x-coordinate that is a multiple of 8, then the caller must take care itself
+ * of supplying a suitable clip rectangle.
  */
 void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *vaddr,
 			     const struct drm_framebuffer *fb, const struct drm_rect *clip)
 {
 	unsigned int linepixels = drm_rect_width(clip);
-	unsigned int lines = clip->y2 - clip->y1;
+	unsigned int lines = drm_rect_height(clip);
 	unsigned int cpp = fb->format->cpp[0];
 	unsigned int len_src32 = linepixels * cpp;
 	struct drm_device *dev = fb->dev;
-	unsigned int start_offset, end_len;
 	unsigned int y;
 	u8 *mono = dst, *gray8;
 	u32 *src32;
@@ -652,14 +647,11 @@ void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *vadd
 		return;
 
 	/*
-	 * The mono destination buffer contains 1 bit per pixel and
-	 * destination scanlines have to be in multiple of 8 pixels.
+	 * The mono destination buffer contains 1 bit per pixel
 	 */
 	if (!dst_pitch)
 		dst_pitch = DIV_ROUND_UP(linepixels, 8);
 
-	drm_WARN_ONCE(dev, dst_pitch % 8 != 0, "dst_pitch is not a multiple of 8\n");
-
 	/*
 	 * The cma memory is write-combined so reads are uncached.
 	 * Speed up by fetching one line at a time.
@@ -677,22 +669,11 @@ void drm_fb_xrgb8888_to_mono(void *dst, unsigned int dst_pitch, const void *vadd
 
 	gray8 = (u8 *)src32 + len_src32;
 
-	/*
-	 * For damage handling, it is possible that only parts of the source
-	 * buffer is copied and this could lead to start and end pixels that
-	 * are not aligned to multiple of 8.
-	 *
-	 * Calculate if the start and end pixels are not aligned and set the
-	 * offsets for the mono line conversion function to adjust.
-	 */
-	start_offset = clip->x1 % 8;
-	end_len = clip->x2 % 8;
-
 	vaddr += clip_offset(clip, fb->pitches[0], cpp);
 	for (y = 0; y < lines; y++) {
 		src32 = memcpy(src32, vaddr, len_src32);
 		drm_fb_xrgb8888_to_gray8_line(gray8, src32, linepixels);
-		drm_fb_gray8_to_mono_line(mono, gray8, dst_pitch, start_offset, end_len);
+		drm_fb_gray8_to_mono_line(mono, gray8, linepixels);
 		vaddr += fb->pitches[0];
 		mono += dst_pitch;
 	}
-- 
2.25.1

[PATCH v2 3/5] drm/ssd130x: Fix rectangle updates

[Geert Uytterhoeven]

The rectangle update functions ssd130x_fb_blit_rect() and
ssd130x_update_rect() do not behave correctly when x1 != 0 or y1 !=
0, or when y1 or y2 are not aligned to display page boundaries.
E.g. when used as a text console, only the first line of text is shown
on the display.

  1. The buffer passed by ssd130x_fb_blit_rect() points to the first
     byte of monochrome bitmap data, and thus has its origin at (x1,
     y1), while ssd130x_update_rect() assumes it is at (0, 0).
     Fix ssd130x_update_rect() by changing the vertical and horizontal
     loop ranges, and adding the offsets only when needed.

  2. In ssd130x_fb_blit_rect(), align y1 and y2 to the display page
     boundaries before doing the color conversion, so the full page
     is converted and updated.
     Remove the correction for an unaligned y1 from
     ssd130x_update_rect(), and add a check to make sure y1 is aligned.

Fixes: a61732e808672cfa ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
---
v2:
  - Add Acked-by.

Note that instead of calling drm_fb_xrgb8888_to_mono() and transposing
the bitmap, the image data could be converted to the transposed format
directly.  However, that would preclude exposing a monochrome format to
userspace when a fourcc for such a monochrome format is introduced.
---
 drivers/gpu/drm/solomon/ssd130x.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index caee851efd5726e7..7c99af4ce9dd4e5c 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -355,11 +355,14 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, u8 *buf,
 	unsigned int width = drm_rect_width(rect);
 	unsigned int height = drm_rect_height(rect);
 	unsigned int line_length = DIV_ROUND_UP(width, 8);
-	unsigned int pages = DIV_ROUND_UP(y % 8 + height, 8);
+	unsigned int pages = DIV_ROUND_UP(height, 8);
+	struct drm_device *drm = &ssd130x->drm;
 	u32 array_idx = 0;
 	int ret, i, j, k;
 	u8 *data_array = NULL;
 
+	drm_WARN_ONCE(drm, y % 8 != 0, "y must be aligned to screen page\n");
+
 	data_array = kcalloc(width, pages, GFP_KERNEL);
 	if (!data_array)
 		return -ENOMEM;
@@ -401,13 +404,13 @@ static int ssd130x_update_rect(struct ssd130x_device *ssd130x, u8 *buf,
 	if (ret < 0)
 		goto out_free;
 
-	for (i = y / 8; i < y / 8 + pages; i++) {
+	for (i = 0; i < pages; i++) {
 		int m = 8;
 
 		/* Last page may be partial */
-		if (8 * (i + 1) > ssd130x->height)
+		if (8 * (y / 8 + i + 1) > ssd130x->height)
 			m = ssd130x->height % 8;
-		for (j = x; j < x + width; j++) {
+		for (j = 0; j < width; j++) {
 			u8 data = 0;
 
 			for (k = 0; k < m; k++) {
@@ -454,6 +457,10 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 	int ret = 0;
 	u8 *buf = NULL;
 
+	/* Align y to display page boundaries */
+	rect->y1 = round_down(rect->y1, 8);
+	rect->y2 = min_t(unsigned int, round_up(rect->y2, 8), ssd130x->height);
+
 	buf = kcalloc(fb->width, fb->height, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
-- 
2.25.1

[PATCH v2 4/5] drm/ssd130x: Reduce temporary buffer sizes

[Geert Uytterhoeven]

ssd130x_clear_screen() allocates a temporary buffer sized to hold one
byte per pixel, while it only needs to hold one bit per pixel.

ssd130x_fb_blit_rect() allocates a temporary buffer sized to hold one
byte per pixel for the whole frame buffer, while it only needs to hold
one bit per pixel for the part that is to be updated.
Pass dst_pitch to drm_fb_xrgb8888_to_mono(), as we have already
calculated it anyway.

Fixes: a61732e808672cfa ("drm: Add driver for Solomon SSD130x OLED displays")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
---
v2:
  - Add Acked-by,
  - s/drm_fb_xrgb8888_to_mono_reversed/drm_fb_xrgb8888_to_mono/ in
    description.
---
 drivers/gpu/drm/solomon/ssd130x.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/solomon/ssd130x.c b/drivers/gpu/drm/solomon/ssd130x.c
index 7c99af4ce9dd4e5c..38b6c2c14f53644b 100644
--- a/drivers/gpu/drm/solomon/ssd130x.c
+++ b/drivers/gpu/drm/solomon/ssd130x.c
@@ -440,7 +440,8 @@ static void ssd130x_clear_screen(struct ssd130x_device *ssd130x)
 		.y2 = ssd130x->height,
 	};
 
-	buf = kcalloc(ssd130x->width, ssd130x->height, GFP_KERNEL);
+	buf = kcalloc(DIV_ROUND_UP(ssd130x->width, 8), ssd130x->height,
+		      GFP_KERNEL);
 	if (!buf)
 		return;
 
@@ -454,6 +455,7 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 {
 	struct ssd130x_device *ssd130x = drm_to_ssd130x(fb->dev);
 	void *vmap = map->vaddr; /* TODO: Use mapping abstraction properly */
+	unsigned int dst_pitch;
 	int ret = 0;
 	u8 *buf = NULL;
 
@@ -461,11 +463,12 @@ static int ssd130x_fb_blit_rect(struct drm_framebuffer *fb, const struct iosys_m
 	rect->y1 = round_down(rect->y1, 8);
 	rect->y2 = min_t(unsigned int, round_up(rect->y2, 8), ssd130x->height);
 
-	buf = kcalloc(fb->width, fb->height, GFP_KERNEL);
+	dst_pitch = DIV_ROUND_UP(drm_rect_width(rect), 8);
+	buf = kcalloc(dst_pitch, drm_rect_height(rect), GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
 
-	drm_fb_xrgb8888_to_mono(buf, 0, vmap, fb, rect);
+	drm_fb_xrgb8888_to_mono(buf, dst_pitch, vmap, fb, rect);
 
 	ssd130x_update_rect(ssd130x, buf, rect);
 
-- 
2.25.1

[PATCH v2 5/5] drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

[Geert Uytterhoeven]

As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
---
v2:
  - Add Reviewed-by.

Untested due to lack of hardware.

I replaced kmalloc_array() by kmalloc() to match size calculations in
other locations in this driver.  There is no point in handling a
possible multiplication overflow only here.
---
 drivers/gpu/drm/tiny/repaper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tiny/repaper.c b/drivers/gpu/drm/tiny/repaper.c
index a096fb8b83e99dc8..7738b87f370ad147 100644
--- a/drivers/gpu/drm/tiny/repaper.c
+++ b/drivers/gpu/drm/tiny/repaper.c
@@ -530,7 +530,7 @@ static int repaper_fb_dirty(struct drm_framebuffer *fb)
 	DRM_DEBUG("Flushing [FB:%d] st=%ums\n", fb->base.id,
 		  epd->factored_stage_time);
 
-	buf = kmalloc_array(fb->width, fb->height, GFP_KERNEL);
+	buf = kmalloc(fb->width * fb->height / 8, GFP_KERNEL);
 	if (!buf) {
 		ret = -ENOMEM;
 		goto out_exit;
-- 
2.25.1

Re: [PATCH v2 5/5] drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

[Javier Martinez Canillas]

Geert Uytterhoeven <geert@linux-m68k.org> writes:

> As the temporary buffer is no longer used to store 8-bit grayscale data,
> its size can be reduced to the size needed to store the monochrome
> bitmap data.
>
> Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
> ---

Pushed to drm-misc (drm-misc-next). Thanks!

-- 
Best regards,

Javier Martinez Canillas
Core Platforms
Red Hat

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Javier Martinez Canillas]

Hello Geert,

On 3/17/22 09:18, Geert Uytterhoeven wrote:
>         Hi all,
> 
> This patch series contains fixes and improvements for the XRGB888 to
> monochrome conversion in the DRM core, and for its users.
> 
> This has been tested on an Adafruit FeatherWing 128x32 OLED, connected
> to an OrangeCrab ECP5 FPGA board running a 64 MHz VexRiscv RISC-V
> softcore, using a text console with 4x6, 7x14 and 8x8 fonts.
> 
> Thanks!
> 
> Geert Uytterhoeven (5):
>   drm/format-helper: Rename drm_fb_xrgb8888_to_mono_reversed()
>   drm/format-helper: Fix XRGB888 to monochrome conversion
>   drm/ssd130x: Fix rectangle updates
>   drm/ssd130x: Reduce temporary buffer sizes
>   drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()
>

Thanks for re-spinning this series and again for fixing my bugs!

I pushed patches 1-4 to drm-misc (drm-misc-next) but left patch 5 since
would like to give Noralf the opportunity to review/test before pushing.

By the way, you should probably request commit access to the drm-misc tree:

https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html

-- 
Best regards,

Javier Martinez Canillas
Linux Engineering
Red Hat

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Andy Shevchenko]

On Thu, Mar 17, 2022 at 12:39:57PM +0100, Javier Martinez Canillas wrote:
> On 3/17/22 09:18, Geert Uytterhoeven wrote:

> By the way, you should probably request commit access to the drm-misc tree:
> 
> https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html

Does it really work? I tried and no one replied to request.
Keeping silent is a bad service. If people don't want a person
to have such access it should be well communicated.

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 707 bytes --]

On Fri, Mar 18, 2022 at 03:42:48PM +0200, Andy Shevchenko wrote:
> On Thu, Mar 17, 2022 at 12:39:57PM +0100, Javier Martinez Canillas wrote:
> > On 3/17/22 09:18, Geert Uytterhoeven wrote:
> 
> > By the way, you should probably request commit access to the drm-misc tree:
> > 
> > https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html
> 
> Does it really work? I tried and no one replied to request.
> Keeping silent is a bad service. If people don't want a person
> to have such access it should be well communicated.

I don't see any issue on Gitlab to request commit access, so I'm not
sure what you did exactly but it's not surprising you didn't get any
answer.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Andy Shevchenko]

On Fri, Mar 18, 2022 at 03:21:45PM +0100, Maxime Ripard wrote:
> On Fri, Mar 18, 2022 at 03:42:48PM +0200, Andy Shevchenko wrote:
> > On Thu, Mar 17, 2022 at 12:39:57PM +0100, Javier Martinez Canillas wrote:
> > > On 3/17/22 09:18, Geert Uytterhoeven wrote:
> > 
> > > By the way, you should probably request commit access to the drm-misc tree:
> > > 
> > > https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html
> > 
> > Does it really work? I tried and no one replied to request.
> > Keeping silent is a bad service. If people don't want a person
> > to have such access it should be well communicated.
> 
> I don't see any issue on Gitlab to request commit access, so I'm not
> sure what you did exactly but it's not surprising you didn't get any
> answer.

https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/311


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1535 bytes --]

On Fri, Mar 18, 2022 at 04:33:19PM +0200, Andy Shevchenko wrote:
> On Fri, Mar 18, 2022 at 03:21:45PM +0100, Maxime Ripard wrote:
> > On Fri, Mar 18, 2022 at 03:42:48PM +0200, Andy Shevchenko wrote:
> > > On Thu, Mar 17, 2022 at 12:39:57PM +0100, Javier Martinez Canillas wrote:
> > > > On 3/17/22 09:18, Geert Uytterhoeven wrote:
> > > 
> > > > By the way, you should probably request commit access to the drm-misc tree:
> > > > 
> > > > https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html
> > > 
> > > Does it really work? I tried and no one replied to request.
> > > Keeping silent is a bad service. If people don't want a person
> > > to have such access it should be well communicated.
> > 
> > I don't see any issue on Gitlab to request commit access, so I'm not
> > sure what you did exactly but it's not surprising you didn't get any
> > answer.
> 
> https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/311

Indeed, I wasn't expecting it to be that old.

I'm not sure why it fell through the cracks, sorry for that.

That being said, the criteria for requesting drm-misc commit access are
listed here:
https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html#drm-misc

And looking at your commit history so far, I'm not sure you qualifies
yet for the first criteria. All your patches to drivers/gpu/drm, while
definitely useful, only seem to be conversions to helpers and general
best practices changes, which could be classified as trivial.

Maxime

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v2 0/5] drm: Fix monochrome conversion for sdd130x

[Andy Shevchenko]

On Fri, Apr 08, 2022 at 03:54:13PM +0200, Maxime Ripard wrote:
> On Fri, Mar 18, 2022 at 04:33:19PM +0200, Andy Shevchenko wrote:
> > On Fri, Mar 18, 2022 at 03:21:45PM +0100, Maxime Ripard wrote:
> > > On Fri, Mar 18, 2022 at 03:42:48PM +0200, Andy Shevchenko wrote:
> > > > On Thu, Mar 17, 2022 at 12:39:57PM +0100, Javier Martinez Canillas wrote:
> > > > > On 3/17/22 09:18, Geert Uytterhoeven wrote:
> > > > 
> > > > > By the way, you should probably request commit access to the drm-misc tree:
> > > > > 
> > > > > https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html
> > > > 
> > > > Does it really work? I tried and no one replied to request.
> > > > Keeping silent is a bad service. If people don't want a person
> > > > to have such access it should be well communicated.
> > > 
> > > I don't see any issue on Gitlab to request commit access, so I'm not
> > > sure what you did exactly but it's not surprising you didn't get any
> > > answer.
> > 
> > https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/311
> 
> Indeed, I wasn't expecting it to be that old.

That's part of "non-working" process.

> I'm not sure why it fell through the cracks, sorry for that.
> 
> That being said, the criteria for requesting drm-misc commit access are
> listed here:
> https://drm.pages.freedesktop.org/maintainer-tools/commit-access.html#drm-misc
> 
> And looking at your commit history so far, I'm not sure you qualifies
> yet for the first criteria. All your patches to drivers/gpu/drm, while
> definitely useful, only seem to be conversions to helpers and general
> best practices changes, which could be classified as trivial.

Can you, please, comment it there then and close the request?

-- 
With Best Regards,
Andy Shevchenko