[PATCH -next] backlight: ktd253: Switch to use dev_err_probe() helper

[PATCH -next] backlight: ktd253: Switch to use dev_err_probe() helper

[Yang Yingliang]

In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.
---
 drivers/video/backlight/ktd253-backlight.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
index 37aa5a669530..d7d43454f64a 100644
--- a/drivers/video/backlight/ktd253-backlight.c
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -173,12 +173,9 @@ static int ktd253_backlight_probe(struct platform_device *pdev)
 	}
 
 	ktd253->gpiod = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
-	if (IS_ERR(ktd253->gpiod)) {
-		ret = PTR_ERR(ktd253->gpiod);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "gpio line missing or invalid.\n");
-		return ret;
-	}
+	if (IS_ERR(ktd253->gpiod))
+		return dev_err_probe(dev, PTR_ERR(ktd253->gpiod),
+				     "gpio line missing or invalid.\n");
 	gpiod_set_consumer_name(ktd253->gpiod, dev_name(dev));
 	/* Bring backlight to a known off state */
 	msleep(KTD253_T_OFF_MS);
-- 
2.25.1

Re: [PATCH -next] backlight: ktd253: Switch to use dev_err_probe() helper

[Daniel Thompson]

On Mon, Sep 26, 2022 at 09:35:25PM +0800, Yang Yingliang wrote:
> In the probe path, dev_err() can be replaced with dev_err_probe()
> which will check if error code is -EPROBE_DEFER and prints the
> error name. It also sets the defer probe reason which can be
> checked later through debugfs. It's more simple in error path.

Please add a SoB and resend.

Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>


Daniel.