From: neil.armstrong@linaro.org
To: Chris Morgan <macroalpha82@gmail.com>,
linux-rockchip@lists.infradead.org
Cc: devicetree@vger.kernel.org, conor+dt@kernel.org,
Chris Morgan <macromorgan@hotmail.com>,
krzysztof.kozlowski+dt@linaro.org, sboyd@kernel.org,
sam@ravnborg.org, mturquette@baylibre.com, javierm@redhat.com,
dri-devel@lists.freedesktop.org, robh+dt@kernel.org,
mripard@kernel.org, tzimmermann@suse.de,
quic_jesszhan@quicinc.com, linux-clk@vger.kernel.org
Subject: Re: [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for Powkiddy X55 panel
Date: Tue, 5 Dec 2023 08:57:48 +0100 [thread overview]
Message-ID: <f38df966-5c82-47be-8ea4-b7df8ebc173a@linaro.org> (raw)
In-Reply-To: <20231204185719.569021-7-macroalpha82@gmail.com>
On 04/12/2023 19:57, Chris Morgan wrote:
> From: Chris Morgan <macromorgan@hotmail.com>
>
> Add support for the Powkiddy X55 panel as used on the Powkiddy X55
> handheld gaming console. This panel uses a Himax HX8394 display
> controller and requires a vendor provided init sequence. The display
> resolution is 720x1280 and is 67mm by 121mm as measured with calipers.
>
> Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
> ---
> drivers/gpu/drm/panel/panel-himax-hx8394.c | 137 +++++++++++++++++++++
> 1 file changed, 137 insertions(+)
>
> diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> index b68ea09f4725..ff0dc08b9829 100644
> --- a/drivers/gpu/drm/panel/panel-himax-hx8394.c
> +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c
> @@ -38,6 +38,7 @@
> #define HX8394_CMD_SETMIPI 0xba
> #define HX8394_CMD_SETOTP 0xbb
> #define HX8394_CMD_SETREGBANK 0xbd
> +#define HX8394_CMD_UNKNOWN5 0xbf
> #define HX8394_CMD_UNKNOWN1 0xc0
> #define HX8394_CMD_SETDGCLUT 0xc1
> #define HX8394_CMD_SETID 0xc3
> @@ -52,6 +53,7 @@
> #define HX8394_CMD_SETGIP1 0xd5
> #define HX8394_CMD_SETGIP2 0xd6
> #define HX8394_CMD_SETGPO 0xd6
> +#define HX8394_CMD_UNKNOWN4 0xd8
> #define HX8394_CMD_SETSCALING 0xdd
> #define HX8394_CMD_SETIDLE 0xdf
> #define HX8394_CMD_SETGAMMA 0xe0
> @@ -203,6 +205,140 @@ static const struct hx8394_panel_desc hsd060bhw4_desc = {
> .init_sequence = hsd060bhw4_init_sequence,
> };
>
> +static int powkiddy_x55_init_sequence(struct hx8394 *ctx)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> +
> + /* 5.19.8 SETEXTC: Set extension command (B9h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETEXTC,
> + 0xff, 0x83, 0x94);
> +
> + /* 5.19.9 SETMIPI: Set MIPI control (BAh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETMIPI,
> + 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0);
> +
> + /* 5.19.2 SETPOWER: Set power (B1h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> + 0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47);
> +
> + /* 5.19.3 SETDISP: Set display related register (B2h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETDISP,
> + 0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f);
> +
> + /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETCYC,
> + 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75,
> + 0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c,
> + 0x86);
> +
> + /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETVCOM,
> + 0x6e, 0x6e);
> +
> + /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP0,
> + 0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10,
> + 0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15,
> + 0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07,
> + 0x07, 0x0c, 0x40);
> +
> + /* 5.19.20 Set GIP Option1 (D5h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP1,
> + 0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05,
> + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18,
> + 0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21,
> + 0x18, 0x18, 0x18, 0x18);
> +
> + /* 5.19.21 Set GIP Option2 (D6h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGIP2,
> + 0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
> + 0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18,
> + 0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18,
> + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24,
> + 0x18, 0x18, 0x18, 0x18);
> +
> + /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETGAMMA,
> + 0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56,
> + 0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8,
> + 0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00,
> + 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65,
> + 0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba,
> + 0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN1,
> + 0x1f, 0x31);
> +
> + /* 5.19.17 SETPANEL (CCh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPANEL,
> + 0x0b);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN3,
> + 0x02);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x02);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN4,
> + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
> + 0xff, 0xff);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x00);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x01);
> +
> + /* 5.19.2 SETPOWER: Set power (B1h) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETPOWER,
> + 0x00);
> +
> + /* 5.19.11 Set register bank (BDh) */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_SETREGBANK,
> + 0x00);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN5,
> + 0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01);
> +
> + /* Unknown command, not listed in the HX8394-F datasheet */
> + mipi_dsi_dcs_write_seq(dsi, HX8394_CMD_UNKNOWN2,
> + 0xed);
> +
> + return 0;
> +}
> +
> +static const struct drm_display_mode powkiddy_x55_mode = {
> + .hdisplay = 720,
> + .hsync_start = 720 + 44,
> + .hsync_end = 720 + 44 + 20,
> + .htotal = 720 + 44 + 20 + 20,
> + .vdisplay = 1280,
> + .vsync_start = 1280 + 12,
> + .vsync_end = 1280 + 12 + 10,
> + .vtotal = 1280 + 12 + 10 + 10,
> + .clock = 63290,
> + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
> + .width_mm = 67,
> + .height_mm = 121,
> +};
> +
> +static const struct hx8394_panel_desc powkiddy_x55_desc = {
> + .mode = &powkiddy_x55_mode,
> + .lanes = 4,
> + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
> + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET,
> + .format = MIPI_DSI_FMT_RGB888,
> + .init_sequence = powkiddy_x55_init_sequence,
> +};
> +
> static int hx8394_enable(struct drm_panel *panel)
> {
> struct hx8394 *ctx = panel_to_hx8394(panel);
> @@ -419,6 +555,7 @@ static void hx8394_remove(struct mipi_dsi_device *dsi)
>
> static const struct of_device_id hx8394_of_match[] = {
> { .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc },
> + { .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc },
> { /* sentinel */ }
> };
> MODULE_DEVICE_TABLE(of, hx8394_of_match);
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
next prev parent reply other threads:[~2023-12-05 7:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-04 18:57 [PATCH V2 00/10] rockchip: Add Powkiddy X55 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 01/10] drm/panel: himax-hx8394: Drop prepare/unprepare tracking Chris Morgan
2023-12-05 7:55 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 02/10] drm/panel: himax-hx8394: Drop shutdown logic Chris Morgan
2023-12-05 7:57 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 03/10] dt-bindings: display: Document Himax HX8394 panel rotation Chris Morgan
2023-12-04 18:57 ` [PATCH V2 04/10] drm/panel: himax-hx8394: Add Panel Rotation Support Chris Morgan
2023-12-05 7:56 ` neil.armstrong
2023-12-04 18:57 ` [PATCH V2 05/10] dt-bindings: display: himax-hx8394: Add Powkiddy X55 panel Chris Morgan
2023-12-04 18:57 ` [PATCH V2 06/10] drm/panel: himax-hx8394: Add Support for " Chris Morgan
2023-12-05 7:57 ` neil.armstrong [this message]
2023-12-04 18:57 ` [PATCH V2 07/10] clk: rockchip: Mark pclk_usb as critical on rk3568 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 08/10] clk: rockchip: rk3568: Add PLL rate for 126.4MHz Chris Morgan
2023-12-04 18:57 ` [PATCH V2 09/10] dt-bindings: arm: rockchip: Add Powkiddy X55 Chris Morgan
2023-12-04 18:57 ` [PATCH V2 10/10] arm64: dts: " Chris Morgan
2023-12-05 8:26 ` [PATCH V2 00/10] " Neil Armstrong
2023-12-05 8:28 ` Neil Armstrong
2023-12-05 9:41 ` Heiko Stübner
2023-12-05 9:52 ` (subset) " Heiko Stuebner
2023-12-05 9:59 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f38df966-5c82-47be-8ea4-b7df8ebc173a@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=javierm@redhat.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=macroalpha82@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=mripard@kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_jesszhan@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=sboyd@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).