From: Chandra Annamaneni <chandra627@gmail.com>
To: gregkh@linuxfoundation.org
Cc: devel@driverdev.osuosl.org, gneukum1@gmail.com,
chandra627@gmail.com, michael.scheiderer@fau.de,
fabian.krueger@fau.de, linux-kernel@vger.kernel.org,
simon@nikanor.nu
Subject: [PATCH] KPC2000: kpc2000_spi.c: Fix alignment and style problems.
Date: Tue, 8 Oct 2019 20:50:39 -0700 [thread overview]
Message-ID: <1570593039-19059-1-git-send-email-chandra627@gmail.com> (raw)
Fixed alignment and style issues raised by checkpatch.pl
Signed-off-by: Chandra Annamaneni <chandra627@gmail.com>
---
drivers/staging/kpc2000/kpc2000_spi.c | 49 ++++++++++++++++++++---------------
1 file changed, 28 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/kpc2000/kpc2000_spi.c b/drivers/staging/kpc2000/kpc2000_spi.c
index 3be33c4..a20f2d7 100644
--- a/drivers/staging/kpc2000/kpc2000_spi.c
+++ b/drivers/staging/kpc2000/kpc2000_spi.c
@@ -30,19 +30,27 @@
#include "kpc.h"
static struct mtd_partition p2kr0_spi0_parts[] = {
- { .name = "SLOT_0", .size = 7798784, .offset = 0, },
- { .name = "SLOT_1", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "SLOT_2", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "SLOT_3", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "CS0_EXTRA", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_0", .size = 7798784, .offset = 0,},
+ { .name = "SLOT_1", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_2", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_3", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "CS0_EXTRA", .size = MTDPART_SIZ_FULL, .offset =
+ MTDPART_OFS_NXTBLK},
};
static struct mtd_partition p2kr0_spi1_parts[] = {
- { .name = "SLOT_4", .size = 7798784, .offset = 0, },
- { .name = "SLOT_5", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "SLOT_6", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "SLOT_7", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
- { .name = "CS1_EXTRA", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_4", .size = 7798784, .offset = 0,},
+ { .name = "SLOT_5", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_6", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "SLOT_7", .size = 7798784, .offset =
+ MTDPART_OFS_NXTBLK},
+ { .name = "CS1_EXTRA", .size = MTDPART_SIZ_FULL, .offset =
+ MTDPART_OFS_NXTBLK},
};
static struct flash_platform_data p2kr0_spi0_pdata = {
@@ -50,6 +58,7 @@ static struct flash_platform_data p2kr0_spi0_pdata = {
.nr_parts = ARRAY_SIZE(p2kr0_spi0_parts),
.parts = p2kr0_spi0_parts,
};
+
static struct flash_platform_data p2kr0_spi1_pdata = {
.name = "SPI1",
.nr_parts = ARRAY_SIZE(p2kr0_spi1_parts),
@@ -165,7 +174,7 @@ kp_spi_read_reg(struct kp_spi_controller_state *cs, int idx)
u64 val;
addr += idx;
- if ((idx == KP_SPI_REG_CONFIG) && (cs->conf_cache >= 0))
+ if (idx == KP_SPI_REG_CONFIG && cs->conf_cache >= 0)
return cs->conf_cache;
val = readq(addr);
@@ -227,8 +236,7 @@ kp_spi_txrx_pio(struct spi_device *spidev, struct spi_transfer *transfer)
kp_spi_write_reg(cs, KP_SPI_REG_TXDATA, val);
processed++;
}
- }
- else if (rx) {
+ } else if (rx) {
for (i = 0 ; i < c ; i++) {
char test = 0;
@@ -315,19 +323,18 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)
if (transfer->speed_hz > KP_SPI_CLK ||
(len && !(rx_buf || tx_buf))) {
dev_dbg(kpspi->dev, " transfer: %d Hz, %d %s%s, %d bpw\n",
- transfer->speed_hz,
- len,
- tx_buf ? "tx" : "",
- rx_buf ? "rx" : "",
- transfer->bits_per_word);
+ transfer->speed_hz,
+ len,
+ tx_buf ? "tx" : "",
+ rx_buf ? "rx" : "",
+ transfer->bits_per_word);
dev_dbg(kpspi->dev, " transfer -EINVAL\n");
return -EINVAL;
}
if (transfer->speed_hz &&
transfer->speed_hz < (KP_SPI_CLK >> 15)) {
dev_dbg(kpspi->dev, "speed_hz %d below minimum %d Hz\n",
- transfer->speed_hz,
- KP_SPI_CLK >> 15);
+ transfer->speed_hz, KP_SPI_CLK >> 15);
dev_dbg(kpspi->dev, " speed_hz -EINVAL\n");
return -EINVAL;
}
@@ -478,7 +485,7 @@ kp_spi_probe(struct platform_device *pldev)
/* register the slave boards */
#define NEW_SPI_DEVICE_FROM_BOARD_INFO_TABLE(table) \
for (i = 0 ; i < ARRAY_SIZE(table) ; i++) { \
- spi_new_device(master, &(table[i])); \
+ spi_new_device(master, &table[i]); \
}
switch ((drvdata->card_id & 0xFFFF0000) >> 16) {
--
2.7.4
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next reply other threads:[~2019-10-09 3:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-09 3:50 Chandra Annamaneni [this message]
2019-10-09 7:43 ` [PATCH] KPC2000: kpc2000_spi.c: Fix alignment and style problems Greg KH
2019-10-09 7:57 ` Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1570593039-19059-1-git-send-email-chandra627@gmail.com \
--to=chandra627@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=fabian.krueger@fau.de \
--cc=gneukum1@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.scheiderer@fau.de \
--cc=simon@nikanor.nu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).