DriverDev-Devel Archive on lore.kernel.org
 help / color / Atom feed
From: Jerome Pouiller <Jerome.Pouiller@silabs.com>
To: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	"David S . Miller" <davem@davemloft.net>,
	Kalle Valo <kvalo@codeaurora.org>
Subject: [PATCH 15/23] wfx: add data_rx.c/data_rx.h
Date: Mon, 12 Oct 2020 12:46:40 +0200
Message-ID: <20201012104648.985256-16-Jerome.Pouiller@silabs.com> (raw)
In-Reply-To: <20201012104648.985256-1-Jerome.Pouiller@silabs.com>

From: Jérôme Pouiller <jerome.pouiller@silabs.com>

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/net/wireless/silabs/wfx/data_rx.c | 93 +++++++++++++++++++++++
 drivers/net/wireless/silabs/wfx/data_rx.h | 18 +++++
 2 files changed, 111 insertions(+)
 create mode 100644 drivers/net/wireless/silabs/wfx/data_rx.c
 create mode 100644 drivers/net/wireless/silabs/wfx/data_rx.h

diff --git a/drivers/net/wireless/silabs/wfx/data_rx.c b/drivers/net/wireless/silabs/wfx/data_rx.c
new file mode 100644
index 000000000000..385f2d42a0e2
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/data_rx.c
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Datapath implementation.
+ *
+ * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#include <linux/etherdevice.h>
+#include <net/mac80211.h>
+
+#include "data_rx.h"
+#include "wfx.h"
+#include "bh.h"
+#include "sta.h"
+
+static void wfx_rx_handle_ba(struct wfx_vif *wvif, struct ieee80211_mgmt *mgmt)
+{
+	int params, tid;
+
+	if (wfx_api_older_than(wvif->wdev, 3, 6))
+		return;
+
+	switch (mgmt->u.action.u.addba_req.action_code) {
+	case WLAN_ACTION_ADDBA_REQ:
+		params = le16_to_cpu(mgmt->u.action.u.addba_req.capab);
+		tid = (params & IEEE80211_ADDBA_PARAM_TID_MASK) >> 2;
+		ieee80211_start_rx_ba_session_offl(wvif->vif, mgmt->sa, tid);
+		break;
+	case WLAN_ACTION_DELBA:
+		params = le16_to_cpu(mgmt->u.action.u.delba.params);
+		tid = (params &  IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
+		ieee80211_stop_rx_ba_session_offl(wvif->vif, mgmt->sa, tid);
+		break;
+	}
+}
+
+void wfx_rx_cb(struct wfx_vif *wvif,
+	       const struct hif_ind_rx *arg, struct sk_buff *skb)
+{
+	struct ieee80211_rx_status *hdr = IEEE80211_SKB_RXCB(skb);
+	struct ieee80211_hdr *frame = (struct ieee80211_hdr *)skb->data;
+	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
+
+	memset(hdr, 0, sizeof(*hdr));
+
+	if (arg->status == HIF_STATUS_RX_FAIL_MIC)
+		hdr->flag |= RX_FLAG_MMIC_ERROR | RX_FLAG_IV_STRIPPED;
+	else if (arg->status)
+		goto drop;
+
+	if (skb->len < sizeof(struct ieee80211_pspoll)) {
+		dev_warn(wvif->wdev->dev, "malformed SDU received\n");
+		goto drop;
+	}
+
+	hdr->band = NL80211_BAND_2GHZ;
+	hdr->freq = ieee80211_channel_to_frequency(arg->channel_number,
+						   hdr->band);
+
+	if (arg->rxed_rate >= 14) {
+		hdr->encoding = RX_ENC_HT;
+		hdr->rate_idx = arg->rxed_rate - 14;
+	} else if (arg->rxed_rate >= 4) {
+		hdr->rate_idx = arg->rxed_rate - 2;
+	} else {
+		hdr->rate_idx = arg->rxed_rate;
+	}
+
+	if (!arg->rcpi_rssi) {
+		hdr->flag |= RX_FLAG_NO_SIGNAL_VAL;
+		dev_info(wvif->wdev->dev, "received frame without RSSI data\n");
+	}
+	hdr->signal = arg->rcpi_rssi / 2 - 110;
+	hdr->antenna = 0;
+
+	if (arg->encryp)
+		hdr->flag |= RX_FLAG_DECRYPTED;
+
+	// Block ack negotiation is offloaded by the firmware. However,
+	// re-ordering must be done by the mac80211.
+	if (ieee80211_is_action(frame->frame_control) &&
+	    mgmt->u.action.category == WLAN_CATEGORY_BACK &&
+	    skb->len > IEEE80211_MIN_ACTION_SIZE) {
+		wfx_rx_handle_ba(wvif, mgmt);
+		goto drop;
+	}
+
+	ieee80211_rx_irqsafe(wvif->wdev->hw, skb);
+	return;
+
+drop:
+	dev_kfree_skb(skb);
+}
diff --git a/drivers/net/wireless/silabs/wfx/data_rx.h b/drivers/net/wireless/silabs/wfx/data_rx.h
new file mode 100644
index 000000000000..4c0da37f2084
--- /dev/null
+++ b/drivers/net/wireless/silabs/wfx/data_rx.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Datapath implementation.
+ *
+ * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
+ * Copyright (c) 2010, ST-Ericsson
+ */
+#ifndef WFX_DATA_RX_H
+#define WFX_DATA_RX_H
+
+struct wfx_vif;
+struct sk_buff;
+struct hif_ind_rx;
+
+void wfx_rx_cb(struct wfx_vif *wvif,
+	       const struct hif_ind_rx *arg, struct sk_buff *skb);
+
+#endif /* WFX_DATA_RX_H */
-- 
2.28.0

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel

  parent reply index

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-12 10:46 [PATCH 00/23] wfx: get out from the staging area Jerome Pouiller
2020-10-12 10:46 ` [PATCH 01/23] dt-bindings: introduce silabs,wfx.yaml Jerome Pouiller
2020-10-13 16:49   ` Rob Herring
2020-10-14 13:49     ` Jérôme Pouiller
2020-11-02 15:58       ` Kalle Valo
2020-10-12 10:46 ` [PATCH 02/23] wfx: add Makefile/Kconfig Jerome Pouiller
2020-10-12 10:46 ` [PATCH 03/23] wfx: add wfx.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 04/23] wfx: add main.c/main.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 05/23] wfx: add bus.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 06/23] wfx: add bus_spi.c Jerome Pouiller
2020-10-12 10:46 ` [PATCH 07/23] wfx: add bus_sdio.c Jerome Pouiller
2020-10-13 20:11   ` Pali Rohár
2020-10-14 11:52     ` Jérôme Pouiller
2020-10-14 12:43       ` Pali Rohár
2020-10-15 14:03         ` Jérôme Pouiller
2020-10-16 11:54           ` Ulf Hansson
2020-11-02 16:02             ` Kalle Valo
2020-10-16 11:30   ` Ulf Hansson
2020-10-16 12:16     ` Jérôme Pouiller
2020-10-12 10:46 ` [PATCH 08/23] wfx: add hwio.c/hwio.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 09/23] wfx: add fwio.c/fwio.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 10/23] wfx: add bh.c/bh.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 11/23] wfx: add hif_api_*.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 12/23] wfx: add hif_tx*.c/hif_tx*.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 13/23] wfx: add key.c/key.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 14/23] wfx: add hif_rx.c/hif_rx.h Jerome Pouiller
2020-10-12 10:46 ` Jerome Pouiller [this message]
2020-10-12 10:46 ` [PATCH 16/23] wfx: add queue.c/queue.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 17/23] wfx: add data_tx.c/data_tx.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 18/23] wfx: add sta.c/sta.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 19/23] wfx: add scan.c/scan.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 20/23] wfx: add debug.c/debug.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 21/23] wfx: add traces.h Jerome Pouiller
2020-10-12 10:46 ` [PATCH 22/23] wfx: remove from the staging area Jerome Pouiller
2020-10-12 10:46 ` [PATCH 23/23] wfx: get out " Jerome Pouiller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201012104648.985256-16-Jerome.Pouiller@silabs.com \
    --to=jerome.pouiller@silabs.com \
    --cc=davem@davemloft.net \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DriverDev-Devel Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/driverdev-devel/0 driverdev-devel/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 driverdev-devel driverdev-devel/ https://lore.kernel.org/driverdev-devel \
		driverdev-devel@linuxdriverproject.org devel@driverdev.osuosl.org
	public-inbox-index driverdev-devel

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.linuxdriverproject.driverdev-devel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git