From: Shreeya Patel <shreeya.patel23498@gmail.com>
To: Larry.Finger@lwfinger.net, gregkh@linuxfoundation.org,
devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org,
outreachy-kernel@googlegroups.com
Cc: Shreeya Patel <shreeya.patel23498@gmail.com>
Subject: [Outreachy kernel] [PATCH 04/11] Staging: rtl8188eu: phy: Add space around operators
Date: Sun, 22 Mar 2020 03:54:20 +0530 [thread overview]
Message-ID: <9ae02593b7645c9b1b5fa4fb86623466fa70ef19.1584826154.git.shreeya.patel23498@gmail.com> (raw)
In-Reply-To: <cover.1584826154.git.shreeya.patel23498@gmail.com>
Add space around operators for improving the code
readability.
Reported by checkpatch.pl
git diff -w shows no difference.
diff of the .o files before and after the changes shows no difference.
Signed-off-by: Shreeya Patel <shreeya.patel23498@gmail.com>
---
shreeya@Shreeya-Patel:~git/kernels/staging$ git diff -w drivers/staging/rtl8188eu/hal/phy.c
shreeya@Shreeya-Patel:~git/kernels/staging$
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$ diff phy_old.o phy.o
shreeya@Shreeya-Patel:~git/kernels/staging/drivers/staging/rtl8188eu/hal$
drivers/staging/rtl8188eu/hal/phy.c | 138 ++++++++++++++--------------
1 file changed, 69 insertions(+), 69 deletions(-)
diff --git a/drivers/staging/rtl8188eu/hal/phy.c b/drivers/staging/rtl8188eu/hal/phy.c
index afaf9e55195a..b9025815b682 100644
--- a/drivers/staging/rtl8188eu/hal/phy.c
+++ b/drivers/staging/rtl8188eu/hal/phy.c
@@ -69,10 +69,10 @@ static u32 rf_serial_read(struct adapter *adapt,
bMaskDWord);
tmplong2 = (tmplong2 & (~bLSSIReadAddress)) |
- (offset<<23) | bLSSIReadEdge;
+ (offset << 23) | bLSSIReadEdge;
phy_set_bb_reg(adapt, rFPGA0_XA_HSSIParameter2, bMaskDWord,
- tmplong&(~bLSSIReadEdge));
+ tmplong & (~bLSSIReadEdge));
udelay(10);
phy_set_bb_reg(adapt, phyreg->rfHSSIPara2, bMaskDWord, tmplong2);
@@ -102,7 +102,7 @@ static void rf_serial_write(struct adapter *adapt,
struct bb_reg_def *phyreg = &adapt->HalData->PHYRegDef[rfpath];
offset &= 0xff;
- data_and_addr = ((offset<<20) | (data&0x000fffff)) & 0x0fffffff;
+ data_and_addr = ((offset << 20) | (data & 0x000fffff)) & 0x0fffffff;
phy_set_bb_reg(adapt, phyreg->rf3wireOffset, bMaskDWord, data_and_addr);
}
@@ -143,20 +143,20 @@ static void get_tx_power_index(struct adapter *adapt, u8 channel, u8 *cck_pwr,
for (TxCount = 0; TxCount < path_nums; TxCount++) {
if (TxCount == RF_PATH_A) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->OFDM_24G_Diff[TxCount][RF_PATH_A];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][RF_PATH_A];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
} else if (TxCount == RF_PATH_B) {
cck_pwr[TxCount] = hal_data->Index24G_CCK_Base[TxCount][index];
- ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[RF_PATH_A][index]+
+ ofdm_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[RF_PATH_A][index] +
hal_data->BW20_24G_Diff[TxCount][index];
- bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index]+
- hal_data->BW20_24G_Diff[TxCount][RF_PATH_A]+
+ bw20_pwr[TxCount] = hal_data->Index24G_BW40_Base[RF_PATH_A][index] +
+ hal_data->BW20_24G_Diff[TxCount][RF_PATH_A] +
hal_data->BW20_24G_Diff[TxCount][index];
bw40_pwr[TxCount] = hal_data->Index24G_BW40_Base[TxCount][index];
}
@@ -205,7 +205,7 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
/* Set MAC register */
reg_bw_opmode = usb_read8(adapt, REG_BWOPMODE);
- reg_prsr_rsc = usb_read8(adapt, REG_RRSR+2);
+ reg_prsr_rsc = usb_read8(adapt, REG_RRSR + 2);
switch (hal_data->CurrentChannelBW) {
case HT_CHANNEL_WIDTH_20:
@@ -215,9 +215,9 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
case HT_CHANNEL_WIDTH_40:
reg_bw_opmode &= ~BW_OPMODE_20MHZ;
usb_write8(adapt, REG_BWOPMODE, reg_bw_opmode);
- reg_prsr_rsc = (reg_prsr_rsc&0x90) |
- (hal_data->nCur40MhzPrimeSC<<5);
- usb_write8(adapt, REG_RRSR+2, reg_prsr_rsc);
+ reg_prsr_rsc = (reg_prsr_rsc & 0x90) |
+ (hal_data->nCur40MhzPrimeSC << 5);
+ usb_write8(adapt, REG_RRSR + 2, reg_prsr_rsc);
break;
default:
break;
@@ -236,7 +236,7 @@ static void phy_set_bw_mode_callback(struct adapter *adapt)
* These settings are required only for 40MHz
*/
phy_set_bb_reg(adapt, rCCK0_System, bCCKSideBand,
- (hal_data->nCur40MhzPrimeSC>>1));
+ (hal_data->nCur40MhzPrimeSC >> 1));
phy_set_bb_reg(adapt, rOFDM1_LSTF, 0xC00,
hal_data->nCur40MhzPrimeSC);
phy_set_bb_reg(adapt, 0x818, (BIT(26) | BIT(27)),
@@ -337,8 +337,8 @@ void rtl88eu_dm_txpower_track_adjust(struct odm_dm_struct *dm_odm, u8 type,
if (pwr_value >= ODM_TXPWRTRACK_MAX_IDX_88E && *direction == 1)
pwr_value = ODM_TXPWRTRACK_MAX_IDX_88E;
- *out_write_val = pwr_value | (pwr_value<<8) | (pwr_value<<16) |
- (pwr_value<<24);
+ *out_write_val = pwr_value | (pwr_value << 8) | (pwr_value << 16) |
+ (pwr_value << 24);
}
static void dm_txpwr_track_setpwr(struct odm_dm_struct *dm_odm)
@@ -389,9 +389,9 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
if (thermal_val) {
/* Query OFDM path A default setting */
- ele_d = phy_query_bb_reg(adapt, rOFDM0_XATxIQImbalance, bMaskDWord)&bMaskOFDM_D;
+ ele_d = phy_query_bb_reg(adapt, rOFDM0_XATxIQImbalance, bMaskDWord) & bMaskOFDM_D;
for (i = 0; i < OFDM_TABLE_SIZE_92D; i++) {
- if (ele_d == (OFDMSwingTable[i]&bMaskOFDM_D)) {
+ if (ele_d == (OFDMSwingTable[i] & bMaskOFDM_D)) {
ofdm_index_old[0] = (u8)i;
dm_odm->BbSwingIdxOfdmBase = (u8)i;
break;
@@ -472,18 +472,18 @@ void rtl88eu_dm_txpower_tracking_callback_thermalmeter(struct adapter *adapt)
}
}
if (offset >= index_mapping_NUM_88E)
- offset = index_mapping_NUM_88E-1;
+ offset = index_mapping_NUM_88E - 1;
/* Updating ofdm_index values with new OFDM / CCK offset */
ofdm_index[0] = dm_odm->RFCalibrateInfo.OFDM_index[0] + ofdm_index_mapping[j][offset];
- if (ofdm_index[0] > OFDM_TABLE_SIZE_92D-1)
- ofdm_index[0] = OFDM_TABLE_SIZE_92D-1;
+ if (ofdm_index[0] > OFDM_TABLE_SIZE_92D - 1)
+ ofdm_index[0] = OFDM_TABLE_SIZE_92D - 1;
else if (ofdm_index[0] < ofdm_min_index)
ofdm_index[0] = ofdm_min_index;
cck_index = dm_odm->RFCalibrateInfo.CCK_index + ofdm_index_mapping[j][offset];
- if (cck_index > CCK_TABLE_SIZE-1)
- cck_index = CCK_TABLE_SIZE-1;
+ if (cck_index > CCK_TABLE_SIZE - 1)
+ cck_index = CCK_TABLE_SIZE - 1;
else if (cck_index < 0)
cck_index = 0;
@@ -548,8 +548,8 @@ static u8 phy_path_a_iqk(struct adapter *adapt, bool config_pathb)
reg_e9c = phy_query_bb_reg(adapt, rTx_Power_After_IQK_A, bMaskDWord);
if (!(reg_eac & BIT(28)) &&
- (((reg_e94 & 0x03FF0000)>>16) != 0x142) &&
- (((reg_e9c & 0x03FF0000)>>16) != 0x42))
+ (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+ (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
return result;
}
@@ -600,13 +600,13 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
reg_e9c = phy_query_bb_reg(adapt, rTx_Power_After_IQK_A, bMaskDWord);
if (!(reg_eac & BIT(28)) &&
- (((reg_e94 & 0x03FF0000)>>16) != 0x142) &&
- (((reg_e9c & 0x03FF0000)>>16) != 0x42))
+ (((reg_e94 & 0x03FF0000) >> 16) != 0x142) &&
+ (((reg_e9c & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
else /* if Tx not OK, ignore Rx */
return result;
- u4tmp = 0x80007C00 | (reg_e94&0x3FF0000) | ((reg_e9c&0x3FF0000) >> 16);
+ u4tmp = 0x80007C00 | (reg_e94 & 0x3FF0000) | ((reg_e9c & 0x3FF0000) >> 16);
phy_set_bb_reg(adapt, rTx_IQK, bMaskDWord, u4tmp);
/* 1 RX IQK */
@@ -648,8 +648,8 @@ static u8 phy_path_a_rx_iqk(struct adapter *adapt, bool configPathB)
phy_set_rf_reg(adapt, RF_PATH_A, 0xdf, bRFRegOffsetMask, 0x180);
if (!(reg_eac & BIT(27)) && /* if Tx is OK, check whether Rx is OK */
- (((reg_ea4 & 0x03FF0000)>>16) != 0x132) &&
- (((reg_eac & 0x03FF0000)>>16) != 0x36))
+ (((reg_ea4 & 0x03FF0000) >> 16) != 0x132) &&
+ (((reg_eac & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
else
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
@@ -677,15 +677,15 @@ static u8 phy_path_b_iqk(struct adapter *adapt)
regecc = phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2, bMaskDWord);
if (!(regeac & BIT(31)) &&
- (((regeb4 & 0x03FF0000)>>16) != 0x142) &&
- (((regebc & 0x03FF0000)>>16) != 0x42))
+ (((regeb4 & 0x03FF0000) >> 16) != 0x142) &&
+ (((regebc & 0x03FF0000) >> 16) != 0x42))
result |= 0x01;
else
return result;
if (!(regeac & BIT(30)) &&
- (((regec4 & 0x03FF0000)>>16) != 0x132) &&
- (((regecc & 0x03FF0000)>>16) != 0x36))
+ (((regec4 & 0x03FF0000) >> 16) != 0x132) &&
+ (((regecc & 0x03FF0000) >> 16) != 0x36))
result |= 0x02;
else
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION,
@@ -711,7 +711,7 @@ static void patha_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx0_a = (x * oldval_0) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XATxIQImbalance, 0x3FF, tx0_a);
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(31),
- ((x * oldval_0>>7) & 0x1));
+ ((x * oldval_0 >> 7) & 0x1));
y = result[final_candidate][1];
if ((y & 0x00000200) != 0)
@@ -719,11 +719,11 @@ static void patha_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx0_c = (y * oldval_0) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XCTxAFE, 0xF0000000,
- ((tx0_c&0x3C0)>>6));
+ ((tx0_c & 0x3C0) >> 6));
phy_set_bb_reg(adapt, rOFDM0_XATxIQImbalance, 0x003F0000,
- (tx0_c&0x3F));
+ (tx0_c & 0x3F));
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(29),
- ((y * oldval_0>>7) & 0x1));
+ ((y * oldval_0 >> 7) & 0x1));
if (txonly)
return;
@@ -757,7 +757,7 @@ static void pathb_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
phy_set_bb_reg(adapt, rOFDM0_XBTxIQImbalance, 0x3FF, tx1_a);
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(27),
- ((x * oldval_1>>7) & 0x1));
+ ((x * oldval_1 >> 7) & 0x1));
y = result[final_candidate][5];
if ((y & 0x00000200) != 0)
@@ -766,11 +766,11 @@ static void pathb_fill_iqk(struct adapter *adapt, bool iqkok, s32 result[][8],
tx1_c = (y * oldval_1) >> 8;
phy_set_bb_reg(adapt, rOFDM0_XDTxAFE, 0xF0000000,
- ((tx1_c&0x3C0)>>6));
+ ((tx1_c & 0x3C0) >> 6));
phy_set_bb_reg(adapt, rOFDM0_XBTxIQImbalance, 0x003F0000,
- (tx1_c&0x3F));
+ (tx1_c & 0x3F));
phy_set_bb_reg(adapt, rOFDM0_ECCAThreshold, BIT(25),
- ((y * oldval_1>>7) & 0x1));
+ ((y * oldval_1 >> 7) & 0x1));
if (txonly)
return;
@@ -851,9 +851,9 @@ static void mac_setting_calibration(struct adapter *adapt, u32 *mac_reg, u32 *ba
usb_write8(adapt, mac_reg[i], 0x3F);
for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++)
- usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT(3))));
+ usb_write8(adapt, mac_reg[i], (u8)(backup[i] & (~BIT(3))));
- usb_write8(adapt, mac_reg[i], (u8)(backup[i]&(~BIT(5))));
+ usb_write8(adapt, mac_reg[i], (u8)(backup[i] & (~BIT(5))));
}
static void path_a_standby(struct adapter *adapt)
@@ -902,22 +902,22 @@ static bool simularity_compare(struct adapter *adapt, s32 resulta[][8],
if (diff > MAX_TOLERANCE) {
if ((i == 2 || i == 6) && !sim_bitmap) {
- if (resulta[c1][i] + resulta[c1][i+1] == 0)
- final_candidate[(i/4)] = c2;
- else if (resulta[c2][i] + resulta[c2][i+1] == 0)
- final_candidate[(i/4)] = c1;
+ if (resulta[c1][i] + resulta[c1][i + 1] == 0)
+ final_candidate[(i / 4)] = c2;
+ else if (resulta[c2][i] + resulta[c2][i + 1] == 0)
+ final_candidate[(i / 4)] = c1;
else
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
} else {
- sim_bitmap = sim_bitmap | (1<<i);
+ sim_bitmap = sim_bitmap | (1 << i);
}
}
}
if (sim_bitmap == 0) {
- for (i = 0; i < (bound/4); i++) {
+ for (i = 0; i < (bound / 4); i++) {
if (final_candidate[i] != 0xFF) {
- for (j = i*4; j < (i+1)*4-2; j++)
+ for (j = i * 4; j < (i + 1) * 4 - 2; j++)
resulta[3][j] = resulta[final_candidate[i]][j];
result = false;
}
@@ -1038,9 +1038,9 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_a_ok = phy_path_a_iqk(adapt, is2t);
if (path_a_ok == 0x01) {
result[t][0] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_A,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][1] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_A,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
}
}
@@ -1049,9 +1049,9 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_a_ok = phy_path_a_rx_iqk(adapt, is2t);
if (path_a_ok == 0x03) {
result[t][2] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_A_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][3] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_A_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
}
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD,
@@ -1073,19 +1073,19 @@ static void phy_iq_calibrate(struct adapter *adapt, s32 result[][8],
path_b_ok = phy_path_b_iqk(adapt);
if (path_b_ok == 0x03) {
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][6] = (phy_query_bb_reg(adapt, rRx_Power_Before_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][7] = (phy_query_bb_reg(adapt, rRx_Power_After_IQK_B_2,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
break;
} else if (i == (retry_count - 1) && path_b_ok == 0x01) { /* Tx IQK OK */
result[t][4] = (phy_query_bb_reg(adapt, rTx_Power_Before_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
result[t][5] = (phy_query_bb_reg(adapt, rTx_Power_After_IQK_B,
- bMaskDWord)&0x3FF0000)>>16;
+ bMaskDWord) & 0x3FF0000) >> 16;
}
}
@@ -1138,12 +1138,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* Check continuous TX and Packet TX */
tmpreg = usb_read8(adapt, 0xd03);
- if ((tmpreg&0x70) != 0)
- usb_write8(adapt, 0xd03, tmpreg&0x8F);
+ if ((tmpreg & 0x70) != 0)
+ usb_write8(adapt, 0xd03, tmpreg & 0x8F);
else
usb_write8(adapt, REG_TXPAUSE, 0xFF);
- if ((tmpreg&0x70) != 0) {
+ if ((tmpreg & 0x70) != 0) {
/* 1. Read original RF mode */
/* Path-A */
rf_a_mode = rtw_hal_read_rfreg(adapt, RF_PATH_A, RF_AC,
@@ -1157,12 +1157,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 2. Set RF mode = standby mode */
/* Path-A */
phy_set_rf_reg(adapt, RF_PATH_A, RF_AC, bMask12Bits,
- (rf_a_mode&0x8FFFF)|0x10000);
+ (rf_a_mode & 0x8FFFF) | 0x10000);
/* Path-B */
if (is2t)
phy_set_rf_reg(adapt, RF_PATH_B, RF_AC, bMask12Bits,
- (rf_b_mode&0x8FFFF)|0x10000);
+ (rf_b_mode & 0x8FFFF) | 0x10000);
}
/* 3. Read RF reg18 */
@@ -1170,12 +1170,12 @@ static void phy_lc_calibrate(struct adapter *adapt, bool is2t)
/* 4. Set LC calibration begin bit15 */
phy_set_rf_reg(adapt, RF_PATH_A, RF_CHNLBW, bMask12Bits,
- lc_cal|0x08000);
+ lc_cal | 0x08000);
msleep(100);
/* Restore original situation */
- if ((tmpreg&0x70) != 0) {
+ if ((tmpreg & 0x70) != 0) {
/* Deal with continuous TX case */
/* Path-A */
usb_write8(adapt, 0xd03, tmpreg);
--
2.17.1
_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2020-03-21 22:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-21 22:19 [Outreachy kernel] [PATCH 00/11] Staging: rtl8188eu: hal: Add space around operators Shreeya Patel
2020-03-21 22:21 ` [Outreachy kernel] [PATCH 01/11] Staging: rtl8188eu: hal_com: " Shreeya Patel
2020-03-22 11:27 ` Greg KH
2020-03-22 15:09 ` Joe Perches
2020-03-22 23:18 ` Shreeya Patel
2020-03-23 1:04 ` Stefano Brivio
2020-03-23 10:10 ` Shreeya Patel
2020-03-21 22:22 ` [Outreachy kernel] [PATCH 02/11] Staging: rtl8188eu: odm: " Shreeya Patel
2020-03-21 22:23 ` [Outreachy kernel] [PATCH 03/11] Staging: rtl8188eu: odm_hwconfig: " Shreeya Patel
2020-03-21 22:24 ` Shreeya Patel [this message]
2020-03-21 22:25 ` [Outreachy kernel] [PATCH 05/11] Staging: rtl8188eu: pwrseqcmd: " Shreeya Patel
2020-03-21 22:25 ` [Outreachy kernel] [PATCH 06/11] Staging: rtl8188eu: rf: " Shreeya Patel
2020-03-21 22:26 ` [Outreachy kernel] [PATCH 07/11] Staging: rtl8188eu: rf_cfg: " Shreeya Patel
2020-03-21 22:27 ` [Outreachy kernel] [PATCH 08/11] Staging: rtl8188eu: rtl8188e_cmd: " Shreeya Patel
2020-03-21 22:28 ` [Outreachy kernel] [PATCH 09/11] Staging: rtl8188eu: rtl8188e_hal_init: " Shreeya Patel
2020-03-21 22:29 ` [Outreachy kernel] [PATCH 10/11] Staging: rtl8188eu: rtl8188e_rxdesc: " Shreeya Patel
2020-03-21 22:30 ` [Outreachy kernel] [PATCH 11/11] Staging: rtl8188eu: rtl8188eu_xmit: " Shreeya Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9ae02593b7645c9b1b5fa4fb86623466fa70ef19.1584826154.git.shreeya.patel23498@gmail.com \
--to=shreeya.patel23498@gmail.com \
--cc=Larry.Finger@lwfinger.net \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=outreachy-kernel@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).