From: Florian Fainelli <f.fainelli@gmail.com> To: Stefan Wahren <stefan.wahren@i2se.com>, Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, Adrian Hunter <adrian.hunter@intel.com>, Ulf Hansson <ulf.hansson@linaro.org> Cc: Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, iivanov@suse.de, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH V2 00/10] ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support Date: Sun, 22 Aug 2021 12:31:58 +0200 [thread overview] Message-ID: <fb80f7a5-8fd4-73e3-4c64-77f120546cc4@gmail.com> (raw) In-Reply-To: <1628334401-6577-1-git-send-email-stefan.wahren@i2se.com> On 8/7/2021 1:06 PM, Stefan Wahren wrote: > This series add support for the Raspberry Pi Compute Module 4 and its > IO board. > > Changes in V2: > - drop emmc2bus patch as it affects userspace (thanks to Marc Zyngier) > - tested with CM4 and integrate sdhci patches from Nicolas (just include kHz fixups) > - add Rob's Acked-by > - add HS200 property to emmc2 node for a slight performance gain > - move antenna comment to the proper position Nicolas, I am assuming you will be picking up these patches and submit a BCM283x pull request with them. Thanks! > > Nicolas Saenz Julienne (2): > mmc: sdhci-iproc: Cap min clock frequency on BCM2711 > mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711 > > Stefan Wahren (8): > ARM: dts: bcm2711: fix MDIO #address- and #size-cells > ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states > dt-bindings: display: bcm2835: add optional property power-domains > ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi > dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4 > ARM: dts: Add Raspberry Pi Compute Module 4 > ARM: dts: Add Raspberry Pi Compute Module 4 IO Board > arm64: dts: broadcom: Add reference to RPi CM4 IO Board > > .../devicetree/bindings/arm/bcm/bcm2835.yaml | 1 + > .../bindings/display/brcm,bcm2835-dsi0.yaml | 3 + > .../bindings/display/brcm,bcm2835-hdmi.yaml | 3 + > .../bindings/display/brcm,bcm2835-v3d.yaml | 3 + > .../bindings/display/brcm,bcm2835-vec.yaml | 3 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 42 ++----- > arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts | 138 +++++++++++++++++++++ > arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi | 113 +++++++++++++++++ > arch/arm/boot/dts/bcm2711.dtsi | 4 +- > arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 31 ++--- > arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 36 ++---- > arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 36 ++---- > arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 36 ++---- > arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi | 34 +++++ > arch/arm64/boot/dts/broadcom/Makefile | 1 + > .../arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 2 + > drivers/mmc/host/sdhci-iproc.c | 21 +++- > 18 files changed, 366 insertions(+), 142 deletions(-) > create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts > create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi > create mode 100644 arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi > create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts > -- Florian
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com> To: Stefan Wahren <stefan.wahren@i2se.com>, Rob Herring <robh+dt@kernel.org>, Nicolas Saenz Julienne <nsaenz@kernel.org>, Florian Fainelli <f.fainelli@gmail.com>, Adrian Hunter <adrian.hunter@intel.com>, Ulf Hansson <ulf.hansson@linaro.org> Cc: Ray Jui <rjui@broadcom.com>, Scott Branden <sbranden@broadcom.com>, bcm-kernel-feedback-list@broadcom.com, Maxime Ripard <maxime@cerno.tech>, iivanov@suse.de, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: Re: [PATCH V2 00/10] ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support Date: Sun, 22 Aug 2021 12:31:58 +0200 [thread overview] Message-ID: <fb80f7a5-8fd4-73e3-4c64-77f120546cc4@gmail.com> (raw) In-Reply-To: <1628334401-6577-1-git-send-email-stefan.wahren@i2se.com> On 8/7/2021 1:06 PM, Stefan Wahren wrote: > This series add support for the Raspberry Pi Compute Module 4 and its > IO board. > > Changes in V2: > - drop emmc2bus patch as it affects userspace (thanks to Marc Zyngier) > - tested with CM4 and integrate sdhci patches from Nicolas (just include kHz fixups) > - add Rob's Acked-by > - add HS200 property to emmc2 node for a slight performance gain > - move antenna comment to the proper position Nicolas, I am assuming you will be picking up these patches and submit a BCM283x pull request with them. Thanks! > > Nicolas Saenz Julienne (2): > mmc: sdhci-iproc: Cap min clock frequency on BCM2711 > mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711 > > Stefan Wahren (8): > ARM: dts: bcm2711: fix MDIO #address- and #size-cells > ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states > dt-bindings: display: bcm2835: add optional property power-domains > ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi > dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4 > ARM: dts: Add Raspberry Pi Compute Module 4 > ARM: dts: Add Raspberry Pi Compute Module 4 IO Board > arm64: dts: broadcom: Add reference to RPi CM4 IO Board > > .../devicetree/bindings/arm/bcm/bcm2835.yaml | 1 + > .../bindings/display/brcm,bcm2835-dsi0.yaml | 3 + > .../bindings/display/brcm,bcm2835-hdmi.yaml | 3 + > .../bindings/display/brcm,bcm2835-v3d.yaml | 3 + > .../bindings/display/brcm,bcm2835-vec.yaml | 3 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 42 ++----- > arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts | 138 +++++++++++++++++++++ > arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi | 113 +++++++++++++++++ > arch/arm/boot/dts/bcm2711.dtsi | 4 +- > arch/arm/boot/dts/bcm2835-rpi-zero-w.dts | 31 ++--- > arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts | 36 ++---- > arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts | 36 ++---- > arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 36 ++---- > arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi | 34 +++++ > arch/arm64/boot/dts/broadcom/Makefile | 1 + > .../arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts | 2 + > drivers/mmc/host/sdhci-iproc.c | 21 +++- > 18 files changed, 366 insertions(+), 142 deletions(-) > create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts > create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi > create mode 100644 arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi > create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts > -- Florian _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2021-08-22 10:32 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-07 11:06 [PATCH V2 00/10] ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 01/10] ARM: dts: bcm2711: fix MDIO #address- and #size-cells Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 02/10] ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 03/10] dt-bindings: display: bcm2835: add optional property power-domains Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 04/10] mmc: sdhci-iproc: Cap min clock frequency on BCM2711 Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-16 13:59 ` Ulf Hansson 2021-08-16 13:59 ` Ulf Hansson 2021-08-07 11:06 ` [PATCH V2 05/10] mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN " Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-16 13:59 ` Ulf Hansson 2021-08-16 13:59 ` Ulf Hansson 2021-08-26 6:36 ` Jeremy Linton 2021-08-26 6:36 ` Jeremy Linton 2021-08-26 9:22 ` Ulf Hansson 2021-08-26 9:22 ` Ulf Hansson 2021-08-26 11:18 ` Stefan Wahren 2021-08-26 11:18 ` Stefan Wahren 2021-08-27 14:44 ` Ulf Hansson 2021-08-27 14:44 ` Ulf Hansson 2021-08-07 11:06 ` [PATCH V2 06/10] ARM: dts: bcm283x-rpi: Move Wifi/BT into separate dtsi Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 07/10] dt-bindings: arm: bcm2835: Add Raspberry Pi Compute Module 4 Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 08/10] ARM: dts: " Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 09/10] ARM: dts: Add Raspberry Pi Compute Module 4 IO Board Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-09-04 14:52 ` nicolas saenz julienne 2021-09-04 14:52 ` nicolas saenz julienne 2021-09-05 10:33 ` Stefan Wahren 2021-09-05 10:33 ` Stefan Wahren 2021-08-07 11:06 ` [PATCH V2 10/10] arm64: dts: broadcom: Add reference to RPi CM4 " Stefan Wahren 2021-08-07 11:06 ` Stefan Wahren 2021-08-22 10:31 ` Florian Fainelli [this message] 2021-08-22 10:31 ` [PATCH V2 00/10] ARM: dts: Add Raspberry Pi CM4 & CM4 IO Board support Florian Fainelli 2021-08-30 8:46 ` nicolas saenz julienne 2021-08-30 8:46 ` nicolas saenz julienne 2021-09-04 14:45 ` nicolas saenz julienne 2021-09-04 14:45 ` nicolas saenz julienne
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=fb80f7a5-8fd4-73e3-4c64-77f120546cc4@gmail.com \ --to=f.fainelli@gmail.com \ --cc=adrian.hunter@intel.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=iivanov@suse.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-rpi-kernel@lists.infradead.org \ --cc=maxime@cerno.tech \ --cc=nsaenz@kernel.org \ --cc=rjui@broadcom.com \ --cc=robh+dt@kernel.org \ --cc=sbranden@broadcom.com \ --cc=stefan.wahren@i2se.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.