* [PATCH] xfstests: add fuse support @ 2020-01-08 19:25 Miklos Szeredi 2020-02-17 10:08 ` Eryu Guan 0 siblings, 1 reply; 4+ messages in thread From: Miklos Szeredi @ 2020-01-08 19:25 UTC (permalink / raw) To: fstests; +Cc: Eryu Guan, linux-fsdevel This allows using any fuse filesystem that can be mounted with mount -t fuse.$SUBTYPE ... Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> --- README.fuse | 28 ++++++++++++++++++++++++++++ check | 2 ++ common/attr | 4 ++-- common/config | 8 +++++++- common/rc | 34 ++++++++++++++++++++++++++++------ 5 files changed, 67 insertions(+), 9 deletions(-) --- a/common/config +++ b/common/config @@ -295,6 +295,9 @@ _mount_opts() 9p) export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS ;; + fuse) + export MOUNT_OPTIONS=$FUSE_MOUNT_OPTIONS + ;; xfs) export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS ;; @@ -353,6 +356,9 @@ _test_mount_opts() 9p) export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS ;; + fuse) + export TEST_FS_MOUNT_OPTS=$FUSE_MOUNT_OPTIONS + ;; cifs) export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS ;; @@ -485,7 +491,7 @@ _check_device() fi case "$FSTYP" in - 9p|tmpfs|virtiofs) + 9p|fuse|tmpfs|virtiofs) # 9p and virtiofs mount tags are just plain strings, so anything is allowed # tmpfs doesn't use mount source, ignore ;; --- a/common/rc +++ b/common/rc @@ -143,6 +143,8 @@ case "$FSTYP" in ;; 9p) ;; + fuse) + ;; ceph) ;; glusterfs) @@ -339,7 +341,7 @@ _try_scratch_mount() _overlay_scratch_mount $* return $? fi - _mount -t $FSTYP `_scratch_mount_options $*` + _mount -t $FSTYP$SUBTYP `_scratch_mount_options $*` } # mount scratch device with given options and _fail if mount fails @@ -422,7 +424,7 @@ _test_mount() return $? fi _test_options mount - _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR + _mount -t $FSTYP$SUBTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR } _test_unmount() @@ -614,6 +616,9 @@ _test_mkfs() 9p) # do nothing for 9p ;; + fuse) + # do nothing for fuse + ;; virtiofs) # do nothing for virtiofs ;; @@ -654,6 +659,9 @@ _mkfs_dev() 9p) # do nothing for 9p ;; + fuse) + # do nothing for fuse + ;; virtiofs) # do nothing for virtiofs ;; @@ -705,6 +713,14 @@ _scratch_cleanup_files() _overlay_mkdirs $OVL_BASE_SCRATCH_MNT # leave base fs mouted so tests can setup lower/upper dir files ;; + fuse) + [ -n "$SCRATCH_MNT" ] || return 1 + _scratch_mount + if [ ! -e $SCRATCH_MNT/bin/sh ]; then + rm -rf $SCRATCH_MNT/* + fi + _scratch_unmount + ;; *) [ -n "$SCRATCH_MNT" ] || return 1 _scratch_mount @@ -721,7 +737,7 @@ _scratch_mkfs() local mkfs_status case $FSTYP in - nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs) + nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|fuse|virtiofs) # unable to re-create this fstyp, just remove all files in # $SCRATCH_MNT to avoid EEXIST caused by the leftover files # created in previous runs @@ -1495,7 +1511,7 @@ _require_scratch_nocheck() _notrun "this test requires a valid \$SCRATCH_MNT" fi ;; - 9p|virtiofs) + 9p|fuse|virtiofs) if [ -z "$SCRATCH_DEV" ]; then _notrun "this test requires a valid \$SCRATCH_DEV" fi @@ -1619,7 +1635,7 @@ _require_test() _notrun "this test requires a valid \$TEST_DIR" fi ;; - 9p|virtiofs) + 9p|fuse|virtiofs) if [ -z "$TEST_DEV" ]; then _notrun "this test requires a valid \$TEST_DEV" fi @@ -2599,7 +2615,7 @@ _mount_or_remount_rw() if [ $USE_REMOUNT -eq 0 ]; then if [ "$FSTYP" != "overlay" ]; then - _mount -t $FSTYP $mount_opts $device $mountpoint + _mount -t $FSTYP$SUBTYP $mount_opts $device $mountpoint else _overlay_mount $device $mountpoint fi @@ -2727,6 +2743,9 @@ _check_test_fs() 9p) # no way to check consistency for 9p ;; + fuse) + # no way to check consistency for fuse + ;; virtiofs) # no way to check consistency for virtiofs ;; @@ -2788,6 +2807,9 @@ _check_scratch_fs() 9p) # no way to check consistency for 9p ;; + fuse) + # no way to check consistency for fuse + ;; virtiofs) # no way to check consistency for virtiofs ;; --- a/check +++ b/check @@ -56,6 +56,7 @@ check options -glusterfs test GlusterFS -cifs test CIFS -9p test 9p + -fuse test fuse -virtiofs test virtiofs -overlay test overlay -pvfs2 test PVFS2 @@ -269,6 +270,7 @@ while [ $# -gt 0 ]; do -glusterfs) FSTYP=glusterfs ;; -cifs) FSTYP=cifs ;; -9p) FSTYP=9p ;; + -fuse) FSTYP=fuse ;; -virtiofs) FSTYP=virtiofs ;; -overlay) FSTYP=overlay; export OVERLAY=true ;; -pvfs2) FSTYP=pvfs2 ;; --- a/common/attr +++ b/common/attr @@ -238,7 +238,7 @@ _getfattr() # set maximum total attr space based on fs type case "$FSTYP" in -xfs|udf|pvfs2|9p|ceph) +xfs|udf|pvfs2|9p|ceph|fuse) MAX_ATTRS=1000 ;; *) @@ -258,7 +258,7 @@ xfs|udf|btrfs) pvfs2) MAX_ATTRVAL_SIZE=8192 ;; -9p|ceph) +9p|ceph|fuse) MAX_ATTRVAL_SIZE=65536 ;; *) --- /dev/null +++ b/README.fuse @@ -0,0 +1,28 @@ +Here are instructions for testing fuse using the passthrough_ll example +filesystem provided in the libfuse source tree: + +git clone git://github.com/libfuse/libfuse.git +cd libfuse +meson build +cd build +ninja +cp example/passthrough_ll /usr/bin +cd +cat << 'EOF' > /sbin/mount.fuse.passthrough_ll +#!/bin/bash +ulimit -n 1048576 +exec /usr/bin/passthrough_ll -ofsname="$@" +EOF +chmod +x /sbin/mount.fuse.passthrough_ll +mkdir -p /mnt/test /mnt/scratch /home/test/test /home/test/scratch + +Use the following config file: + +export TEST_DEV=non1 +export TEST_DIR=/mnt/test +export SCRATCH_DEV=non2 +export SCRATCH_MNT=/mnt/scratch +export FSTYP=fuse +export SUBTYP=.passthrough_ll +export FUSE_MOUNT_OPTIONS="-osource=/home/test/scratch,allow_other,default_permissions" +export TEST_FS_MOUNT_OPTS="-osource=/home/test/test,allow_other,default_permissions" ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] xfstests: add fuse support 2020-01-08 19:25 [PATCH] xfstests: add fuse support Miklos Szeredi @ 2020-02-17 10:08 ` Eryu Guan 2023-01-04 19:39 ` Jakob Unterwurzacher 0 siblings, 1 reply; 4+ messages in thread From: Eryu Guan @ 2020-02-17 10:08 UTC (permalink / raw) To: Miklos Szeredi; +Cc: fstests, linux-fsdevel On Wed, Jan 08, 2020 at 08:25:25PM +0100, Miklos Szeredi wrote: > This allows using any fuse filesystem that can be mounted with > > mount -t fuse.$SUBTYPE ... > > Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> So sorry for being so late to review.. This patch looks fine to me overall, just some minor comments inline. > --- > README.fuse | 28 ++++++++++++++++++++++++++++ > check | 2 ++ > common/attr | 4 ++-- > common/config | 8 +++++++- > common/rc | 34 ++++++++++++++++++++++++++++------ > 5 files changed, 67 insertions(+), 9 deletions(-) > > --- a/common/config > +++ b/common/config > @@ -295,6 +295,9 @@ _mount_opts() > 9p) > export MOUNT_OPTIONS=$PLAN9_MOUNT_OPTIONS > ;; > + fuse) > + export MOUNT_OPTIONS=$FUSE_MOUNT_OPTIONS > + ;; > xfs) > export MOUNT_OPTIONS=$XFS_MOUNT_OPTIONS > ;; > @@ -353,6 +356,9 @@ _test_mount_opts() > 9p) > export TEST_FS_MOUNT_OPTS=$PLAN9_MOUNT_OPTIONS > ;; > + fuse) > + export TEST_FS_MOUNT_OPTS=$FUSE_MOUNT_OPTIONS > + ;; > cifs) > export TEST_FS_MOUNT_OPTS=$CIFS_MOUNT_OPTIONS > ;; > @@ -485,7 +491,7 @@ _check_device() > fi > > case "$FSTYP" in > - 9p|tmpfs|virtiofs) > + 9p|fuse|tmpfs|virtiofs) > # 9p and virtiofs mount tags are just plain strings, so anything is allowed > # tmpfs doesn't use mount source, ignore Update comment above and mention fuse too? > ;; > --- a/common/rc > +++ b/common/rc > @@ -143,6 +143,8 @@ case "$FSTYP" in > ;; > 9p) > ;; > + fuse) > + ;; > ceph) > ;; > glusterfs) > @@ -339,7 +341,7 @@ _try_scratch_mount() > _overlay_scratch_mount $* > return $? > fi > - _mount -t $FSTYP `_scratch_mount_options $*` > + _mount -t $FSTYP$SUBTYP `_scratch_mount_options $*` Or make it more explicit and call it $FUSE_SUBTYP ? So we know it's only useful in fuse testing. > } > > # mount scratch device with given options and _fail if mount fails > @@ -422,7 +424,7 @@ _test_mount() > return $? > fi > _test_options mount > - _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR > + _mount -t $FSTYP$SUBTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR > } > > _test_unmount() > @@ -614,6 +616,9 @@ _test_mkfs() > 9p) > # do nothing for 9p > ;; > + fuse) > + # do nothing for fuse > + ;; > virtiofs) > # do nothing for virtiofs > ;; > @@ -654,6 +659,9 @@ _mkfs_dev() > 9p) > # do nothing for 9p > ;; > + fuse) > + # do nothing for fuse > + ;; > virtiofs) > # do nothing for virtiofs > ;; > @@ -705,6 +713,14 @@ _scratch_cleanup_files() > _overlay_mkdirs $OVL_BASE_SCRATCH_MNT > # leave base fs mouted so tests can setup lower/upper dir files > ;; > + fuse) > + [ -n "$SCRATCH_MNT" ] || return 1 > + _scratch_mount > + if [ ! -e $SCRATCH_MNT/bin/sh ]; then What's the purpose of this check? Avoid deleting / ? I think that has been done by the $SCRATCH_MNT check. > + rm -rf $SCRATCH_MNT/* > + fi > + _scratch_unmount > + ;; > *) > [ -n "$SCRATCH_MNT" ] || return 1 > _scratch_mount > @@ -721,7 +737,7 @@ _scratch_mkfs() > local mkfs_status > > case $FSTYP in > - nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs) > + nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|fuse|virtiofs) > # unable to re-create this fstyp, just remove all files in > # $SCRATCH_MNT to avoid EEXIST caused by the leftover files > # created in previous runs > @@ -1495,7 +1511,7 @@ _require_scratch_nocheck() > _notrun "this test requires a valid \$SCRATCH_MNT" > fi > ;; > - 9p|virtiofs) > + 9p|fuse|virtiofs) > if [ -z "$SCRATCH_DEV" ]; then > _notrun "this test requires a valid \$SCRATCH_DEV" > fi Check for $SCRATCH_MNT as well? > @@ -1619,7 +1635,7 @@ _require_test() > _notrun "this test requires a valid \$TEST_DIR" > fi > ;; > - 9p|virtiofs) > + 9p|fuse|virtiofs) > if [ -z "$TEST_DEV" ]; then > _notrun "this test requires a valid \$TEST_DEV" > fi Same here, should check $TEST_DIR too. > @@ -2599,7 +2615,7 @@ _mount_or_remount_rw() > > if [ $USE_REMOUNT -eq 0 ]; then > if [ "$FSTYP" != "overlay" ]; then > - _mount -t $FSTYP $mount_opts $device $mountpoint > + _mount -t $FSTYP$SUBTYP $mount_opts $device $mountpoint > else > _overlay_mount $device $mountpoint > fi > @@ -2727,6 +2743,9 @@ _check_test_fs() > 9p) > # no way to check consistency for 9p > ;; > + fuse) > + # no way to check consistency for fuse > + ;; > virtiofs) > # no way to check consistency for virtiofs > ;; > @@ -2788,6 +2807,9 @@ _check_scratch_fs() > 9p) > # no way to check consistency for 9p > ;; > + fuse) > + # no way to check consistency for fuse > + ;; > virtiofs) > # no way to check consistency for virtiofs > ;; > --- a/check > +++ b/check > @@ -56,6 +56,7 @@ check options > -glusterfs test GlusterFS > -cifs test CIFS > -9p test 9p > + -fuse test fuse > -virtiofs test virtiofs > -overlay test overlay > -pvfs2 test PVFS2 > @@ -269,6 +270,7 @@ while [ $# -gt 0 ]; do > -glusterfs) FSTYP=glusterfs ;; > -cifs) FSTYP=cifs ;; > -9p) FSTYP=9p ;; > + -fuse) FSTYP=fuse ;; > -virtiofs) FSTYP=virtiofs ;; > -overlay) FSTYP=overlay; export OVERLAY=true ;; > -pvfs2) FSTYP=pvfs2 ;; > --- a/common/attr > +++ b/common/attr > @@ -238,7 +238,7 @@ _getfattr() > > # set maximum total attr space based on fs type > case "$FSTYP" in > -xfs|udf|pvfs2|9p|ceph) > +xfs|udf|pvfs2|9p|ceph|fuse) > MAX_ATTRS=1000 > ;; > *) > @@ -258,7 +258,7 @@ xfs|udf|btrfs) > pvfs2) > MAX_ATTRVAL_SIZE=8192 > ;; > -9p|ceph) > +9p|ceph|fuse) > MAX_ATTRVAL_SIZE=65536 > ;; As you're fuse maintainer, I assume above max attr setting is correct :) Thanks, Eryu > *) > --- /dev/null > +++ b/README.fuse > @@ -0,0 +1,28 @@ > +Here are instructions for testing fuse using the passthrough_ll example > +filesystem provided in the libfuse source tree: > + > +git clone git://github.com/libfuse/libfuse.git > +cd libfuse > +meson build > +cd build > +ninja > +cp example/passthrough_ll /usr/bin > +cd > +cat << 'EOF' > /sbin/mount.fuse.passthrough_ll > +#!/bin/bash > +ulimit -n 1048576 > +exec /usr/bin/passthrough_ll -ofsname="$@" > +EOF > +chmod +x /sbin/mount.fuse.passthrough_ll > +mkdir -p /mnt/test /mnt/scratch /home/test/test /home/test/scratch > + > +Use the following config file: > + > +export TEST_DEV=non1 > +export TEST_DIR=/mnt/test > +export SCRATCH_DEV=non2 > +export SCRATCH_MNT=/mnt/scratch > +export FSTYP=fuse > +export SUBTYP=.passthrough_ll > +export FUSE_MOUNT_OPTIONS="-osource=/home/test/scratch,allow_other,default_permissions" > +export TEST_FS_MOUNT_OPTS="-osource=/home/test/test,allow_other,default_permissions" > > > ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] xfstests: add fuse support 2020-02-17 10:08 ` Eryu Guan @ 2023-01-04 19:39 ` Jakob Unterwurzacher 2023-01-19 19:18 ` Zorro Lang 0 siblings, 1 reply; 4+ messages in thread From: Jakob Unterwurzacher @ 2023-01-04 19:39 UTC (permalink / raw) To: guaneryu Cc: fstests, linux-fsdevel, miklos, Miklos Szeredi, Jakob Unterwurzacher From: Miklos Szeredi <miklos@szeredi.hu> This allows using any fuse filesystem that can be mounted with mount -t fuse.$FUSE_SUBTYP ... Changelog: v2: Jan 3, 2022, Jakob Unterwurzacher * Rebased to master * Instructions updated ** To not fail with libfuse version mismatch on passthrough_ll exe on Fedora ** To use sudo * Review comments from Eryu Guan addressed: ** Comment updated to mention fuse ** Renamed SUBTYP to FUSE_SUBTYP ** Removed $SCRATCH_MNT/bin/sh check before "rm -rf" ** _require_scratch_nocheck for fuse also checks for $SCRATCH_MNT ** _require_test for fuse also checks for $TEST_DIR v1: Jan 8, 2020, Miklos Szeredi * Initial submission * https://patchwork.kernel.org/project/linux-fsdevel/patch/20200108192504.GA893@miu.piliscsaba.redhat.com/ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Jakob Unterwurzacher <jakobunt@gmail.com> --- README.fuse | 26 ++++++++++++++++++++++++++ check | 3 ++- common/config | 9 +++++++-- common/rc | 24 ++++++++++++++++++------ tests/generic/020 | 4 ++-- 5 files changed, 55 insertions(+), 11 deletions(-) create mode 100644 README.fuse diff --git a/README.fuse b/README.fuse new file mode 100644 index 00000000..35ad9c46 --- /dev/null +++ b/README.fuse @@ -0,0 +1,26 @@ +Here are instructions for testing fuse using the passthrough_ll example +filesystem provided in the libfuse source tree: + +git clone git://github.com/libfuse/libfuse.git +cd libfuse +meson build +cd build +ninja +cat << EOF | sudo tee /sbin/mount.fuse.passthrough_ll +#!/bin/bash +ulimit -n 1048576 +exec $(pwd)/example/passthrough_ll -ofsname="\$@" +EOF +sudo chmod +x /sbin/mount.fuse.passthrough_ll +mkdir -p /mnt/test /mnt/scratch /home/test/test /home/test/scratch + +Use the following local.config file: + +export TEST_DEV=non1 +export TEST_DIR=/mnt/test +export SCRATCH_DEV=non2 +export SCRATCH_MNT=/mnt/scratch +export FSTYP=fuse +export FUSE_SUBTYP=.passthrough_ll +export FUSE_MOUNT_OPTIONS="-osource=/home/test/scratch,allow_other,default_permissions" +export TEST_FS_MOUNT_OPTS="-osource=/home/test/test,allow_other,default_permissions" diff --git a/check b/check index 1ff0f44a..e25037f1 100755 --- a/check +++ b/check @@ -60,6 +60,7 @@ check options -glusterfs test GlusterFS -cifs test CIFS -9p test 9p + -fuse test fuse -virtiofs test virtiofs -overlay test overlay -pvfs2 test PVFS2 @@ -279,7 +280,7 @@ while [ $# -gt 0 ]; do case "$1" in -\? | -h | --help) usage ;; - -nfs|-glusterfs|-cifs|-9p|-virtiofs|-pvfs2|-tmpfs|-ubifs) + -nfs|-glusterfs|-cifs|-9p|-fuse|-virtiofs|-pvfs2|-tmpfs|-ubifs) FSTYP="${1:1}" ;; -overlay) diff --git a/common/config b/common/config index e2aba5a9..6c8cb3a5 100644 --- a/common/config +++ b/common/config @@ -341,6 +341,9 @@ _common_mount_opts() 9p) echo $PLAN9_MOUNT_OPTIONS ;; + fuse) + echo $FUSE_MOUNT_OPTIONS + ;; xfs) echo $XFS_MOUNT_OPTIONS ;; @@ -511,6 +514,8 @@ _source_specific_fs() ;; 9p) ;; + fuse) + ;; ceph) . ./common/ceph ;; @@ -583,8 +588,8 @@ _check_device() fi case "$FSTYP" in - 9p|tmpfs|virtiofs) - # 9p and virtiofs mount tags are just plain strings, so anything is allowed + 9p|fuse|tmpfs|virtiofs) + # 9p, fuse and virtiofs mount tags are just plain strings, so anything is allowed # tmpfs doesn't use mount source, ignore ;; ceph) diff --git a/common/rc b/common/rc index 23530413..c17e3f6e 100644 --- a/common/rc +++ b/common/rc @@ -274,7 +274,7 @@ _try_scratch_mount() _overlay_scratch_mount $* return $? fi - _mount -t $FSTYP `_scratch_mount_options $*` + _mount -t $FSTYP$FUSE_SUBTYP `_scratch_mount_options $*` mount_ret=$? [ $mount_ret -ne 0 ] && return $mount_ret _idmapped_mount $SCRATCH_DEV $SCRATCH_MNT @@ -458,7 +458,7 @@ _test_mount() fi _test_options mount - _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR + _mount -t $FSTYP$FUSE_SUBTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR mount_ret=$? [ $mount_ret -ne 0 ] && return $mount_ret _idmapped_mount $TEST_DEV $TEST_DIR @@ -584,6 +584,9 @@ _test_mkfs() 9p) # do nothing for 9p ;; + fuse) + # do nothing for fuse + ;; virtiofs) # do nothing for virtiofs ;; @@ -624,6 +627,9 @@ _mkfs_dev() 9p) # do nothing for 9p ;; + fuse) + # do nothing for fuse + ;; virtiofs) # do nothing for virtiofs ;; @@ -691,7 +697,7 @@ _scratch_mkfs() local mkfs_status case $FSTYP in - nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs) + nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|fuse|virtiofs) # unable to re-create this fstyp, just remove all files in # $SCRATCH_MNT to avoid EEXIST caused by the leftover files # created in previous runs @@ -1587,7 +1593,7 @@ _require_scratch_nocheck() _notrun "this test requires a valid \$SCRATCH_MNT" fi ;; - 9p|virtiofs) + 9p|fuse|virtiofs) if [ -z "$SCRATCH_DEV" ]; then _notrun "this test requires a valid \$SCRATCH_DEV" fi @@ -1787,7 +1793,7 @@ _require_test() _notrun "this test requires a valid \$TEST_DIR" fi ;; - 9p|virtiofs) + 9p|fuse|virtiofs) if [ -z "$TEST_DEV" ]; then _notrun "this test requires a valid \$TEST_DEV" fi @@ -2986,7 +2992,7 @@ _mount_or_remount_rw() if [ $USE_REMOUNT -eq 0 ]; then if [ "$FSTYP" != "overlay" ]; then - _mount -t $FSTYP $mount_opts $device $mountpoint + _mount -t $FSTYP$FUSE_SUBTYP $mount_opts $device $mountpoint _idmapped_mount $device $mountpoint else _overlay_mount $device $mountpoint @@ -3124,6 +3130,9 @@ _check_test_fs() 9p) # no way to check consistency for 9p ;; + fuse) + # no way to check consistency for fuse + ;; virtiofs) # no way to check consistency for virtiofs ;; @@ -3185,6 +3194,9 @@ _check_scratch_fs() 9p) # no way to check consistency for 9p ;; + fuse) + # no way to check consistency for fuse + ;; virtiofs) # no way to check consistency for virtiofs ;; diff --git a/tests/generic/020 b/tests/generic/020 index b91bca34..be5cecad 100755 --- a/tests/generic/020 +++ b/tests/generic/020 @@ -56,7 +56,7 @@ _attr_get_max() { # set maximum total attr space based on fs type case "$FSTYP" in - xfs|udf|pvfs2|9p|ceph|nfs) + xfs|udf|pvfs2|9p|ceph|fuse|nfs) max_attrs=1000 ;; ext2|ext3|ext4) @@ -134,7 +134,7 @@ _attr_get_maxval_size() pvfs2) max_attrval_size=8192 ;; - xfs|udf|9p) + xfs|udf|9p|fuse) max_attrval_size=65536 ;; bcachefs) -- 2.38.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] xfstests: add fuse support 2023-01-04 19:39 ` Jakob Unterwurzacher @ 2023-01-19 19:18 ` Zorro Lang 0 siblings, 0 replies; 4+ messages in thread From: Zorro Lang @ 2023-01-19 19:18 UTC (permalink / raw) To: Jakob Unterwurzacher Cc: guaneryu, fstests, linux-fsdevel, miklos, Miklos Szeredi On Wed, Jan 04, 2023 at 08:39:33PM +0100, Jakob Unterwurzacher wrote: > From: Miklos Szeredi <miklos@szeredi.hu> > > This allows using any fuse filesystem that can be mounted with > > mount -t fuse.$FUSE_SUBTYP ... > > Changelog: > > v2: Jan 3, 2022, Jakob Unterwurzacher > * Rebased to master > * Instructions updated > ** To not fail with libfuse version mismatch on passthrough_ll exe > on Fedora > ** To use sudo > * Review comments from Eryu Guan addressed: > ** Comment updated to mention fuse > ** Renamed SUBTYP to FUSE_SUBTYP > ** Removed $SCRATCH_MNT/bin/sh check before "rm -rf" > ** _require_scratch_nocheck for fuse also checks for $SCRATCH_MNT > ** _require_test for fuse also checks for $TEST_DIR > > v1: Jan 8, 2020, Miklos Szeredi > * Initial submission > * https://patchwork.kernel.org/project/linux-fsdevel/patch/20200108192504.GA893@miu.piliscsaba.redhat.com/ > > Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> > Signed-off-by: Jakob Unterwurzacher <jakobunt@gmail.com> > --- > README.fuse | 26 ++++++++++++++++++++++++++ > check | 3 ++- > common/config | 9 +++++++-- > common/rc | 24 ++++++++++++++++++------ > tests/generic/020 | 4 ++-- > 5 files changed, 55 insertions(+), 11 deletions(-) > create mode 100644 README.fuse > > diff --git a/README.fuse b/README.fuse > new file mode 100644 > index 00000000..35ad9c46 > --- /dev/null > +++ b/README.fuse > @@ -0,0 +1,26 @@ > +Here are instructions for testing fuse using the passthrough_ll example > +filesystem provided in the libfuse source tree: > + > +git clone git://github.com/libfuse/libfuse.git > +cd libfuse > +meson build > +cd build > +ninja > +cat << EOF | sudo tee /sbin/mount.fuse.passthrough_ll > +#!/bin/bash > +ulimit -n 1048576 > +exec $(pwd)/example/passthrough_ll -ofsname="\$@" > +EOF > +sudo chmod +x /sbin/mount.fuse.passthrough_ll > +mkdir -p /mnt/test /mnt/scratch /home/test/test /home/test/scratch > + > +Use the following local.config file: > + > +export TEST_DEV=non1 > +export TEST_DIR=/mnt/test > +export SCRATCH_DEV=non2 > +export SCRATCH_MNT=/mnt/scratch > +export FSTYP=fuse > +export FUSE_SUBTYP=.passthrough_ll > +export FUSE_MOUNT_OPTIONS="-osource=/home/test/scratch,allow_other,default_permissions" > +export TEST_FS_MOUNT_OPTS="-osource=/home/test/test,allow_other,default_permissions" Hi, Long time ago I added glusterfs supporting, for testing kernel fuse module. Now we'll have general fuse supporting, that's good news. More and more things start to use fuse, I'm glad to see fstests support the fuse test :) This version looks good to me, just a tiny problem on the README.fuse. Generally if we want to set mount options for both TEST_DEV and SCRATCH_DEV, we use the the parameter likes FUSE_MOUNT_OPTIONS (refer to _mount_opts(), _test_mount_opts() and _common_mount_opts()). If you just want to set mount options for SCRATCH_DEV particularly, you might want: export MOUNT_OPTIONS="-osource=/home/test/scratch,allow_other,default_permissions" export TEST_FS_MOUNT_OPTS="-osource=/home/test/test,allow_other,default_permissions" Others looks good to me, I'll give it a little testing, and merge it if can't find any issue. Thanks, Zorro > diff --git a/check b/check > index 1ff0f44a..e25037f1 100755 > --- a/check > +++ b/check > @@ -60,6 +60,7 @@ check options > -glusterfs test GlusterFS > -cifs test CIFS > -9p test 9p > + -fuse test fuse > -virtiofs test virtiofs > -overlay test overlay > -pvfs2 test PVFS2 > @@ -279,7 +280,7 @@ while [ $# -gt 0 ]; do > case "$1" in > -\? | -h | --help) usage ;; > > - -nfs|-glusterfs|-cifs|-9p|-virtiofs|-pvfs2|-tmpfs|-ubifs) > + -nfs|-glusterfs|-cifs|-9p|-fuse|-virtiofs|-pvfs2|-tmpfs|-ubifs) > FSTYP="${1:1}" > ;; > -overlay) > diff --git a/common/config b/common/config > index e2aba5a9..6c8cb3a5 100644 > --- a/common/config > +++ b/common/config > @@ -341,6 +341,9 @@ _common_mount_opts() > 9p) > echo $PLAN9_MOUNT_OPTIONS > ;; > + fuse) > + echo $FUSE_MOUNT_OPTIONS > + ;; > xfs) > echo $XFS_MOUNT_OPTIONS > ;; > @@ -511,6 +514,8 @@ _source_specific_fs() > ;; > 9p) > ;; > + fuse) > + ;; > ceph) > . ./common/ceph > ;; > @@ -583,8 +588,8 @@ _check_device() > fi > > case "$FSTYP" in > - 9p|tmpfs|virtiofs) > - # 9p and virtiofs mount tags are just plain strings, so anything is allowed > + 9p|fuse|tmpfs|virtiofs) > + # 9p, fuse and virtiofs mount tags are just plain strings, so anything is allowed > # tmpfs doesn't use mount source, ignore > ;; > ceph) > diff --git a/common/rc b/common/rc > index 23530413..c17e3f6e 100644 > --- a/common/rc > +++ b/common/rc > @@ -274,7 +274,7 @@ _try_scratch_mount() > _overlay_scratch_mount $* > return $? > fi > - _mount -t $FSTYP `_scratch_mount_options $*` > + _mount -t $FSTYP$FUSE_SUBTYP `_scratch_mount_options $*` > mount_ret=$? > [ $mount_ret -ne 0 ] && return $mount_ret > _idmapped_mount $SCRATCH_DEV $SCRATCH_MNT > @@ -458,7 +458,7 @@ _test_mount() > fi > > _test_options mount > - _mount -t $FSTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR > + _mount -t $FSTYP$FUSE_SUBTYP $TEST_OPTIONS $TEST_FS_MOUNT_OPTS $SELINUX_MOUNT_OPTIONS $* $TEST_DEV $TEST_DIR > mount_ret=$? > [ $mount_ret -ne 0 ] && return $mount_ret > _idmapped_mount $TEST_DEV $TEST_DIR > @@ -584,6 +584,9 @@ _test_mkfs() > 9p) > # do nothing for 9p > ;; > + fuse) > + # do nothing for fuse > + ;; > virtiofs) > # do nothing for virtiofs > ;; > @@ -624,6 +627,9 @@ _mkfs_dev() > 9p) > # do nothing for 9p > ;; > + fuse) > + # do nothing for fuse > + ;; > virtiofs) > # do nothing for virtiofs > ;; > @@ -691,7 +697,7 @@ _scratch_mkfs() > local mkfs_status > > case $FSTYP in > - nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|virtiofs) > + nfs*|cifs|ceph|overlay|glusterfs|pvfs2|9p|fuse|virtiofs) > # unable to re-create this fstyp, just remove all files in > # $SCRATCH_MNT to avoid EEXIST caused by the leftover files > # created in previous runs > @@ -1587,7 +1593,7 @@ _require_scratch_nocheck() > _notrun "this test requires a valid \$SCRATCH_MNT" > fi > ;; > - 9p|virtiofs) > + 9p|fuse|virtiofs) > if [ -z "$SCRATCH_DEV" ]; then > _notrun "this test requires a valid \$SCRATCH_DEV" > fi > @@ -1787,7 +1793,7 @@ _require_test() > _notrun "this test requires a valid \$TEST_DIR" > fi > ;; > - 9p|virtiofs) > + 9p|fuse|virtiofs) > if [ -z "$TEST_DEV" ]; then > _notrun "this test requires a valid \$TEST_DEV" > fi > @@ -2986,7 +2992,7 @@ _mount_or_remount_rw() > > if [ $USE_REMOUNT -eq 0 ]; then > if [ "$FSTYP" != "overlay" ]; then > - _mount -t $FSTYP $mount_opts $device $mountpoint > + _mount -t $FSTYP$FUSE_SUBTYP $mount_opts $device $mountpoint > _idmapped_mount $device $mountpoint > else > _overlay_mount $device $mountpoint > @@ -3124,6 +3130,9 @@ _check_test_fs() > 9p) > # no way to check consistency for 9p > ;; > + fuse) > + # no way to check consistency for fuse > + ;; > virtiofs) > # no way to check consistency for virtiofs > ;; > @@ -3185,6 +3194,9 @@ _check_scratch_fs() > 9p) > # no way to check consistency for 9p > ;; > + fuse) > + # no way to check consistency for fuse > + ;; > virtiofs) > # no way to check consistency for virtiofs > ;; > diff --git a/tests/generic/020 b/tests/generic/020 > index b91bca34..be5cecad 100755 > --- a/tests/generic/020 > +++ b/tests/generic/020 > @@ -56,7 +56,7 @@ _attr_get_max() > { > # set maximum total attr space based on fs type > case "$FSTYP" in > - xfs|udf|pvfs2|9p|ceph|nfs) > + xfs|udf|pvfs2|9p|ceph|fuse|nfs) > max_attrs=1000 > ;; > ext2|ext3|ext4) > @@ -134,7 +134,7 @@ _attr_get_maxval_size() > pvfs2) > max_attrval_size=8192 > ;; > - xfs|udf|9p) > + xfs|udf|9p|fuse) > max_attrval_size=65536 > ;; > bcachefs) > -- > 2.38.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-01-19 19:20 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-01-08 19:25 [PATCH] xfstests: add fuse support Miklos Szeredi 2020-02-17 10:08 ` Eryu Guan 2023-01-04 19:39 ` Jakob Unterwurzacher 2023-01-19 19:18 ` Zorro Lang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).