* [PATCH] xfs: test mkfs.xfs config files
@ 2020-10-27 20:54 Dave Chinner
2020-10-29 21:27 ` Darrick J. Wong
0 siblings, 1 reply; 6+ messages in thread
From: Dave Chinner @ 2020-10-27 20:54 UTC (permalink / raw)
To: fstests; +Cc: linux-xfs
From: "Darrick J. Wong" <darrick.wong@oracle.com>
Simple tests of the upcoming mkfs.xfs config file feature. First we
have some simple tests of properly formatted config files, then
improperly formatted config files, and finally we try to spot
conflicts between config file options and the cli.
[dchinner: updated for new libinih-based implementation.]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
---
common/xfs | 10 +++
tests/xfs/716 | 219 ++++++++++++++++++++++++++++++++++++++++++++++
tests/xfs/716.out | 16 ++++
tests/xfs/717 | 195 +++++++++++++++++++++++++++++++++++++++++
tests/xfs/717.out | 13 +++
tests/xfs/718 | 65 ++++++++++++++
tests/xfs/718.out | 2 +
tests/xfs/719 | 62 +++++++++++++
tests/xfs/719.out | 2 +
tests/xfs/720 | 64 ++++++++++++++
tests/xfs/720.out | 3 +
tests/xfs/group | 5 ++
12 files changed, 656 insertions(+)
create mode 100755 tests/xfs/716
create mode 100644 tests/xfs/716.out
create mode 100755 tests/xfs/717
create mode 100644 tests/xfs/717.out
create mode 100755 tests/xfs/718
create mode 100644 tests/xfs/718.out
create mode 100755 tests/xfs/719
create mode 100644 tests/xfs/719.out
create mode 100755 tests/xfs/720
create mode 100644 tests/xfs/720.out
diff --git a/common/xfs b/common/xfs
index 79dab058..abfd8a15 100644
--- a/common/xfs
+++ b/common/xfs
@@ -700,6 +700,16 @@ _require_xfs_mkfs_ciname()
|| _notrun "need case-insensitive naming support in mkfs.xfs"
}
+# this test requires mkfs.xfs have configuration file support
+_require_xfs_mkfs_cfgfile()
+{
+ echo > /tmp/a
+ _scratch_mkfs_xfs_supported -c options=/tmp/a >/dev/null 2>&1
+ res=$?
+ rm -rf /tmp/a
+ test $res -eq 0 || _notrun "need configuration file support in mkfs.xfs"
+}
+
# XFS_DEBUG requirements
_require_xfs_debug()
{
diff --git a/tests/xfs/716 b/tests/xfs/716
new file mode 100755
index 00000000..d8ee7350
--- /dev/null
+++ b/tests/xfs/716
@@ -0,0 +1,219 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Oracle. All Rights Reserved.
+#
+# FS QA Test 716
+#
+# Feed valid mkfs config files to the mkfs parser to ensure that they are
+# recognized as valid.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap '_cleanup; exit $status' 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.* $def_cfgfile $fsimg
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch_nocheck
+_require_xfs_mkfs_cfgfile
+
+def_cfgfile=$TEST_DIR/a
+fsimg=$TEST_DIR/a.img
+rm -rf $def_cfgfile $fsimg
+truncate -s 20t $fsimg
+
+test_mkfs_config() {
+ local cfgfile="$1"
+ if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
+ cfgfile=$def_cfgfile
+ cat > $cfgfile
+ fi
+ $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
+ cat $tmp.err | _filter_test_dir
+}
+
+echo Simplest config file
+cat > $def_cfgfile << ENDL
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config $def_cfgfile
+
+echo Piped-in config file
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 1
+ENDL
+
+echo Full line comment
+test_mkfs_config << ENDL
+# This is a full line comment.
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ # This is a full line comment.
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+#This is a full line comment.
+[metadata]
+crc = 0
+ENDL
+
+echo End of line comment
+test_mkfs_config << ENDL
+[metadata]
+crc = 0 ; This is an eol comment.
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 0 ;This is an eol comment.
+ENDL
+
+echo Multiple directives
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+finobt = 0
+ENDL
+
+echo Multiple sections
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+
+[inode]
+sparse = 0
+ENDL
+
+echo No directives at all
+test_mkfs_config << ENDL
+[metadata]
+ENDL
+
+echo Space around the section name
+test_mkfs_config << ENDL
+ [metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [metadata]
+crc = 0
+ENDL
+
+echo Single space around the key/value directive
+test_mkfs_config << ENDL
+[metadata]
+ crc=0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc =0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc= 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc=0
+ENDL
+
+echo Two spaces around the key/value directive
+test_mkfs_config << ENDL
+[metadata]
+ crc =0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+ crc= 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+ crc=0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc =0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc= 0
+ENDL
+
+echo Three spaces around the key/value directive
+test_mkfs_config << ENDL
+[metadata]
+ crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+ crc= 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+ENDL
+
+echo Four spaces around the key/value directive
+test_mkfs_config << ENDL
+[metadata]
+ crc = 0
+ENDL
+
+echo Arbitrary spaces and tabs
+test_mkfs_config << ENDL
+[metadata]
+ crc = 0
+ENDL
+
+echo ambiguous comment/section names
+test_mkfs_config << ENDL
+[metadata]
+#[data]
+crc = 0
+ENDL
+
+echo ambiguous comment/variable names
+test_mkfs_config << ENDL
+[metadata]
+#foo = 0 ; is this a comment or a key '#foo' ?
+ENDL
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/716.out b/tests/xfs/716.out
new file mode 100644
index 00000000..4c6e9fad
--- /dev/null
+++ b/tests/xfs/716.out
@@ -0,0 +1,16 @@
+QA output created by 716
+Simplest config file
+Piped-in config file
+Full line comment
+End of line comment
+Multiple directives
+Multiple sections
+No directives at all
+Space around the section name
+Single space around the key/value directive
+Two spaces around the key/value directive
+Three spaces around the key/value directive
+Four spaces around the key/value directive
+Arbitrary spaces and tabs
+ambiguous comment/section names
+ambiguous comment/variable names
diff --git a/tests/xfs/717 b/tests/xfs/717
new file mode 100755
index 00000000..031d59f1
--- /dev/null
+++ b/tests/xfs/717
@@ -0,0 +1,195 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Oracle. All Rights Reserved.
+#
+# FS QA Test 717
+#
+# Feed invalid mkfs config files to the mkfs parser to ensure that they are
+# recognized as invalid.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap '_cleanup; exit $status' 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.* $def_cfgfile $fsimg
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch_nocheck
+_require_xfs_mkfs_cfgfile
+
+def_cfgfile=$TEST_DIR/a
+fsimg=$TEST_DIR/a.img
+rm -rf $def_cfgfile $fsimg
+truncate -s 20t $fsimg
+
+test_mkfs_config() {
+ local cfgfile="$1"
+ if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
+ cfgfile=$def_cfgfile
+ cat > $cfgfile
+ fi
+ $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
+ if [ $? -eq 0 ]; then
+ echo "Test passed, should have failed! Config file parameters:"
+ cat $cfgfile
+ fi
+}
+
+echo Spaces in a section name
+test_mkfs_config << ENDL
+[meta data]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[meta data]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[ metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[ metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[ metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [ metadata]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [ metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [ metadata ]
+crc = 0
+ENDL
+test_mkfs_config << ENDL
+ [ metadata ]
+crc = 0
+ENDL
+
+echo Spaces in the middle of a key name
+test_mkfs_config << ENDL
+[metadata]
+c rc = 0
+ENDL
+
+echo Invalid value
+test_mkfs_config << ENDL
+[metadata]
+crc = waffles
+ENDL
+
+echo Nonexistent sections
+test_mkfs_config << ENDL
+[goober]
+crc = 0
+ENDL
+
+echo Nonexistent keys
+test_mkfs_config << ENDL
+[metadata]
+goober = 0
+ENDL
+
+echo Only zero or one
+test_mkfs_config << ENDL
+[metadata]
+crc = 50
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = -1
+ENDL
+
+echo sysctl style files
+test_mkfs_config << ENDL
+metadata.crc = 1
+ENDL
+
+echo binaries
+test_mkfs_config $MKFS_XFS_PROG 2>&1 | sed -e "s#$MKFS_XFS_PROG#MKFS_XFS_PROG#g"
+
+echo respecified options
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+crc = 1
+ENDL
+
+echo respecified sections
+test_mkfs_config << ENDL
+[metadata]
+crc = 0
+[metadata]
+crc = 1
+ENDL
+
+echo ambiguous comment/section names
+test_mkfs_config << ENDL
+[meta#data]
+crc = 0
+ENDL
+
+echo ambiguous comment/variable names
+test_mkfs_config << ENDL
+[metadata]
+fo#o = 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+foo#=# 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+foo =# 0
+ENDL
+test_mkfs_config << ENDL
+[metadata]
+crc = 0;This is an eol comment.
+ENDL
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/717.out b/tests/xfs/717.out
new file mode 100644
index 00000000..61fff561
--- /dev/null
+++ b/tests/xfs/717.out
@@ -0,0 +1,13 @@
+QA output created by 717
+Spaces in a section name
+Spaces in the middle of a key name
+Invalid value
+Nonexistent sections
+Nonexistent keys
+Only zero or one
+sysctl style files
+binaries
+respecified options
+respecified sections
+ambiguous comment/section names
+ambiguous comment/variable names
diff --git a/tests/xfs/718 b/tests/xfs/718
new file mode 100755
index 00000000..e2beca41
--- /dev/null
+++ b/tests/xfs/718
@@ -0,0 +1,65 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Oracle. All Rights Reserved.
+#
+# FS QA Test 718
+#
+# Test formatting with a well known config file.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap '_cleanup; exit $status' 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.* $def_cfgfile $fsimg
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch_nocheck
+_require_xfs_mkfs_cfgfile
+
+echo "Silence is golden"
+
+def_cfgfile=$TEST_DIR/a
+fsimg=$TEST_DIR/a.img
+rm -rf $def_cfgfile $fsimg
+truncate -s 20t $fsimg
+
+cat > $def_cfgfile << ENDL
+[metadata]
+crc = 1
+rmapbt = 1
+reflink = 1
+
+[inode]
+sparse = 1
+ENDL
+
+$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs
+cat $tmp.mkfs >> $seqres.full
+grep -q 'crc=1' $tmp.mkfs || echo 'v5 not enabled'
+grep -q 'rmapbt=1' $tmp.mkfs || echo 'rmap not enabled'
+grep -q 'reflink=1' $tmp.mkfs || echo 'reflink not enabled'
+grep -q 'sparse=1' $tmp.mkfs || echo 'sparse inodes not enabled'
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/718.out b/tests/xfs/718.out
new file mode 100644
index 00000000..1dad5ab3
--- /dev/null
+++ b/tests/xfs/718.out
@@ -0,0 +1,2 @@
+QA output created by 718
+Silence is golden
diff --git a/tests/xfs/719 b/tests/xfs/719
new file mode 100755
index 00000000..15ff3f27
--- /dev/null
+++ b/tests/xfs/719
@@ -0,0 +1,62 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Oracle. All Rights Reserved.
+#
+# FS QA Test 719
+#
+# Test formatting with a config file that contains conflicting options.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap '_cleanup; exit $status' 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.* $def_cfgfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch_nocheck
+_require_xfs_mkfs_cfgfile
+
+echo "Silence is golden"
+
+def_cfgfile=$TEST_DIR/a
+rm -rf $def_cfgfile
+
+cat > $def_cfgfile << ENDL
+[metadata]
+crc = 0
+rmapbt = 1
+reflink = 1
+
+[inode]
+sparse = 1
+ENDL
+
+$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs 2>&1
+if [ $? -eq 0 ]; then
+ echo "mkfs.xfs did not fail!"
+ cat $tmp.mkfs
+fi
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/719.out b/tests/xfs/719.out
new file mode 100644
index 00000000..25585fa0
--- /dev/null
+++ b/tests/xfs/719.out
@@ -0,0 +1,2 @@
+QA output created by 719
+Silence is golden
diff --git a/tests/xfs/720 b/tests/xfs/720
new file mode 100755
index 00000000..a917e9a6
--- /dev/null
+++ b/tests/xfs/720
@@ -0,0 +1,64 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Oracle. All Rights Reserved.
+#
+# FS QA Test 720
+#
+# Test formatting with conflicts between the config file and the cli.
+#
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap '_cleanup; exit $status' 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.* $def_cfgfile
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs generic
+_require_test
+_require_scratch_nocheck
+_require_xfs_mkfs_cfgfile
+
+cfgfile=$TEST_DIR/a
+rm -rf $cfgfile
+
+# disable crc in config file, enable rmapbt (which requires crc=1) in cli
+cat > $cfgfile << ENDL
+[metadata]
+crc = 0
+ENDL
+
+$MKFS_XFS_PROG -c options=$cfgfile -f -m rmapbt=1 $SCRATCH_DEV > $tmp.mkfs 2>&1
+cat $tmp.mkfs >> $seqres.full
+grep 'rmapbt not supported without CRC support' $tmp.mkfs
+
+# enable rmapbt (which requires crc=1) in config file, disable crc in cli
+cat > $cfgfile << ENDL
+[metadata]
+rmapbt = 1
+ENDL
+
+$MKFS_XFS_PROG -c options=$cfgfile -f -m crc=0 $SCRATCH_DEV > $tmp.mkfs 2>&1
+cat $tmp.mkfs >> $seqres.full
+grep 'rmapbt not supported without CRC support' $tmp.mkfs
+
+# success, all done
+status=0
+exit
diff --git a/tests/xfs/720.out b/tests/xfs/720.out
new file mode 100644
index 00000000..1d2cf2ef
--- /dev/null
+++ b/tests/xfs/720.out
@@ -0,0 +1,3 @@
+QA output created by 720
+rmapbt not supported without CRC support
+rmapbt not supported without CRC support
diff --git a/tests/xfs/group b/tests/xfs/group
index b89c0a4e..4d558e22 100644
--- a/tests/xfs/group
+++ b/tests/xfs/group
@@ -519,3 +519,8 @@
519 auto quick reflink
520 auto quick reflink
521 auto quick realtime growfs
+716 auto quick mkfs
+717 auto quick mkfs
+718 auto quick mkfs
+719 auto quick mkfs
+720 auto quick mkfs
--
2.28.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] xfs: test mkfs.xfs config files
2020-10-27 20:54 [PATCH] xfs: test mkfs.xfs config files Dave Chinner
@ 2020-10-29 21:27 ` Darrick J. Wong
2021-01-16 1:46 ` Darrick J. Wong
0 siblings, 1 reply; 6+ messages in thread
From: Darrick J. Wong @ 2020-10-29 21:27 UTC (permalink / raw)
To: Dave Chinner; +Cc: fstests, linux-xfs
On Wed, Oct 28, 2020 at 07:54:50AM +1100, Dave Chinner wrote:
> From: "Darrick J. Wong" <darrick.wong@oracle.com>
>
> Simple tests of the upcoming mkfs.xfs config file feature. First we
> have some simple tests of properly formatted config files, then
> improperly formatted config files, and finally we try to spot
> conflicts between config file options and the cli.
>
> [dchinner: updated for new libinih-based implementation.]
>
> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> Signed-off-by: Dave Chinner <dchinner@redhat.com>
> ---
> common/xfs | 10 +++
> tests/xfs/716 | 219 ++++++++++++++++++++++++++++++++++++++++++++++
> tests/xfs/716.out | 16 ++++
> tests/xfs/717 | 195 +++++++++++++++++++++++++++++++++++++++++
> tests/xfs/717.out | 13 +++
> tests/xfs/718 | 65 ++++++++++++++
> tests/xfs/718.out | 2 +
> tests/xfs/719 | 62 +++++++++++++
> tests/xfs/719.out | 2 +
> tests/xfs/720 | 64 ++++++++++++++
> tests/xfs/720.out | 3 +
> tests/xfs/group | 5 ++
> 12 files changed, 656 insertions(+)
> create mode 100755 tests/xfs/716
> create mode 100644 tests/xfs/716.out
> create mode 100755 tests/xfs/717
> create mode 100644 tests/xfs/717.out
> create mode 100755 tests/xfs/718
> create mode 100644 tests/xfs/718.out
> create mode 100755 tests/xfs/719
> create mode 100644 tests/xfs/719.out
> create mode 100755 tests/xfs/720
> create mode 100644 tests/xfs/720.out
>
> diff --git a/common/xfs b/common/xfs
> index 79dab058..abfd8a15 100644
> --- a/common/xfs
> +++ b/common/xfs
> @@ -700,6 +700,16 @@ _require_xfs_mkfs_ciname()
> || _notrun "need case-insensitive naming support in mkfs.xfs"
> }
>
> +# this test requires mkfs.xfs have configuration file support
> +_require_xfs_mkfs_cfgfile()
> +{
> + echo > /tmp/a
> + _scratch_mkfs_xfs_supported -c options=/tmp/a >/dev/null 2>&1
> + res=$?
> + rm -rf /tmp/a
> + test $res -eq 0 || _notrun "need configuration file support in mkfs.xfs"
> +}
> +
> # XFS_DEBUG requirements
> _require_xfs_debug()
> {
> diff --git a/tests/xfs/716 b/tests/xfs/716
> new file mode 100755
> index 00000000..d8ee7350
> --- /dev/null
> +++ b/tests/xfs/716
> @@ -0,0 +1,219 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2020 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 716
> +#
> +# Feed valid mkfs config files to the mkfs parser to ensure that they are
> +# recognized as valid.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap '_cleanup; exit $status' 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $def_cfgfile $fsimg
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test
> +_require_scratch_nocheck
> +_require_xfs_mkfs_cfgfile
> +
> +def_cfgfile=$TEST_DIR/a
> +fsimg=$TEST_DIR/a.img
> +rm -rf $def_cfgfile $fsimg
> +truncate -s 20t $fsimg
> +
> +test_mkfs_config() {
> + local cfgfile="$1"
> + if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
> + cfgfile=$def_cfgfile
> + cat > $cfgfile
> + fi
> + $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
> + cat $tmp.err | _filter_test_dir
> +}
> +
> +echo Simplest config file
> +cat > $def_cfgfile << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config $def_cfgfile
> +
> +echo Piped-in config file
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 1
> +ENDL
> +
> +echo Full line comment
> +test_mkfs_config << ENDL
> +# This is a full line comment.
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + # This is a full line comment.
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +#This is a full line comment.
> +[metadata]
> +crc = 0
> +ENDL
> +
> +echo End of line comment
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0 ; This is an eol comment.
Hey, wait a minute, the manpage didn't say I could use semicolon
comments! :)
The libinih page https://github.com/benhoyt/inih says you can though.
Would you mind making a note of that in patch 5 above, please?
--D
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0 ;This is an eol comment.
> +ENDL
> +
> +echo Multiple directives
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +finobt = 0
> +ENDL
> +
> +echo Multiple sections
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +
> +[inode]
> +sparse = 0
> +ENDL
> +
> +echo No directives at all
> +test_mkfs_config << ENDL
> +[metadata]
> +ENDL
> +
> +echo Space around the section name
> +test_mkfs_config << ENDL
> + [metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [metadata]
> +crc = 0
> +ENDL
> +
> +echo Single space around the key/value directive
> +test_mkfs_config << ENDL
> +[metadata]
> + crc=0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc =0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc= 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc=0
> +ENDL
> +
> +echo Two spaces around the key/value directive
> +test_mkfs_config << ENDL
> +[metadata]
> + crc =0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> + crc= 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> + crc=0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc =0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc= 0
> +ENDL
> +
> +echo Three spaces around the key/value directive
> +test_mkfs_config << ENDL
> +[metadata]
> + crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> + crc= 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +
> +echo Four spaces around the key/value directive
> +test_mkfs_config << ENDL
> +[metadata]
> + crc = 0
> +ENDL
> +
> +echo Arbitrary spaces and tabs
> +test_mkfs_config << ENDL
> +[metadata]
> + crc = 0
> +ENDL
> +
> +echo ambiguous comment/section names
> +test_mkfs_config << ENDL
> +[metadata]
> +#[data]
> +crc = 0
> +ENDL
> +
> +echo ambiguous comment/variable names
> +test_mkfs_config << ENDL
> +[metadata]
> +#foo = 0 ; is this a comment or a key '#foo' ?
> +ENDL
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/716.out b/tests/xfs/716.out
> new file mode 100644
> index 00000000..4c6e9fad
> --- /dev/null
> +++ b/tests/xfs/716.out
> @@ -0,0 +1,16 @@
> +QA output created by 716
> +Simplest config file
> +Piped-in config file
> +Full line comment
> +End of line comment
> +Multiple directives
> +Multiple sections
> +No directives at all
> +Space around the section name
> +Single space around the key/value directive
> +Two spaces around the key/value directive
> +Three spaces around the key/value directive
> +Four spaces around the key/value directive
> +Arbitrary spaces and tabs
> +ambiguous comment/section names
> +ambiguous comment/variable names
> diff --git a/tests/xfs/717 b/tests/xfs/717
> new file mode 100755
> index 00000000..031d59f1
> --- /dev/null
> +++ b/tests/xfs/717
> @@ -0,0 +1,195 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2020 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 717
> +#
> +# Feed invalid mkfs config files to the mkfs parser to ensure that they are
> +# recognized as invalid.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap '_cleanup; exit $status' 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $def_cfgfile $fsimg
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test
> +_require_scratch_nocheck
> +_require_xfs_mkfs_cfgfile
> +
> +def_cfgfile=$TEST_DIR/a
> +fsimg=$TEST_DIR/a.img
> +rm -rf $def_cfgfile $fsimg
> +truncate -s 20t $fsimg
> +
> +test_mkfs_config() {
> + local cfgfile="$1"
> + if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
> + cfgfile=$def_cfgfile
> + cat > $cfgfile
> + fi
> + $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
> + if [ $? -eq 0 ]; then
> + echo "Test passed, should have failed! Config file parameters:"
> + cat $cfgfile
> + fi
> +}
> +
> +echo Spaces in a section name
> +test_mkfs_config << ENDL
> +[meta data]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[meta data]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[ metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[ metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[ metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [ metadata]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [ metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [ metadata ]
> +crc = 0
> +ENDL
> +test_mkfs_config << ENDL
> + [ metadata ]
> +crc = 0
> +ENDL
> +
> +echo Spaces in the middle of a key name
> +test_mkfs_config << ENDL
> +[metadata]
> +c rc = 0
> +ENDL
> +
> +echo Invalid value
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = waffles
> +ENDL
> +
> +echo Nonexistent sections
> +test_mkfs_config << ENDL
> +[goober]
> +crc = 0
> +ENDL
> +
> +echo Nonexistent keys
> +test_mkfs_config << ENDL
> +[metadata]
> +goober = 0
> +ENDL
> +
> +echo Only zero or one
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 50
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = -1
> +ENDL
> +
> +echo sysctl style files
> +test_mkfs_config << ENDL
> +metadata.crc = 1
> +ENDL
> +
> +echo binaries
> +test_mkfs_config $MKFS_XFS_PROG 2>&1 | sed -e "s#$MKFS_XFS_PROG#MKFS_XFS_PROG#g"
> +
> +echo respecified options
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +crc = 1
> +ENDL
> +
> +echo respecified sections
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0
> +[metadata]
> +crc = 1
> +ENDL
> +
> +echo ambiguous comment/section names
> +test_mkfs_config << ENDL
> +[meta#data]
> +crc = 0
> +ENDL
> +
> +echo ambiguous comment/variable names
> +test_mkfs_config << ENDL
> +[metadata]
> +fo#o = 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +foo#=# 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +foo =# 0
> +ENDL
> +test_mkfs_config << ENDL
> +[metadata]
> +crc = 0;This is an eol comment.
> +ENDL
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/717.out b/tests/xfs/717.out
> new file mode 100644
> index 00000000..61fff561
> --- /dev/null
> +++ b/tests/xfs/717.out
> @@ -0,0 +1,13 @@
> +QA output created by 717
> +Spaces in a section name
> +Spaces in the middle of a key name
> +Invalid value
> +Nonexistent sections
> +Nonexistent keys
> +Only zero or one
> +sysctl style files
> +binaries
> +respecified options
> +respecified sections
> +ambiguous comment/section names
> +ambiguous comment/variable names
> diff --git a/tests/xfs/718 b/tests/xfs/718
> new file mode 100755
> index 00000000..e2beca41
> --- /dev/null
> +++ b/tests/xfs/718
> @@ -0,0 +1,65 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2020 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 718
> +#
> +# Test formatting with a well known config file.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap '_cleanup; exit $status' 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $def_cfgfile $fsimg
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test
> +_require_scratch_nocheck
> +_require_xfs_mkfs_cfgfile
> +
> +echo "Silence is golden"
> +
> +def_cfgfile=$TEST_DIR/a
> +fsimg=$TEST_DIR/a.img
> +rm -rf $def_cfgfile $fsimg
> +truncate -s 20t $fsimg
> +
> +cat > $def_cfgfile << ENDL
> +[metadata]
> +crc = 1
> +rmapbt = 1
> +reflink = 1
> +
> +[inode]
> +sparse = 1
> +ENDL
> +
> +$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs
> +cat $tmp.mkfs >> $seqres.full
> +grep -q 'crc=1' $tmp.mkfs || echo 'v5 not enabled'
> +grep -q 'rmapbt=1' $tmp.mkfs || echo 'rmap not enabled'
> +grep -q 'reflink=1' $tmp.mkfs || echo 'reflink not enabled'
> +grep -q 'sparse=1' $tmp.mkfs || echo 'sparse inodes not enabled'
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/718.out b/tests/xfs/718.out
> new file mode 100644
> index 00000000..1dad5ab3
> --- /dev/null
> +++ b/tests/xfs/718.out
> @@ -0,0 +1,2 @@
> +QA output created by 718
> +Silence is golden
> diff --git a/tests/xfs/719 b/tests/xfs/719
> new file mode 100755
> index 00000000..15ff3f27
> --- /dev/null
> +++ b/tests/xfs/719
> @@ -0,0 +1,62 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2020 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 719
> +#
> +# Test formatting with a config file that contains conflicting options.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap '_cleanup; exit $status' 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $def_cfgfile
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test
> +_require_scratch_nocheck
> +_require_xfs_mkfs_cfgfile
> +
> +echo "Silence is golden"
> +
> +def_cfgfile=$TEST_DIR/a
> +rm -rf $def_cfgfile
> +
> +cat > $def_cfgfile << ENDL
> +[metadata]
> +crc = 0
> +rmapbt = 1
> +reflink = 1
> +
> +[inode]
> +sparse = 1
> +ENDL
> +
> +$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs 2>&1
> +if [ $? -eq 0 ]; then
> + echo "mkfs.xfs did not fail!"
> + cat $tmp.mkfs
> +fi
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/719.out b/tests/xfs/719.out
> new file mode 100644
> index 00000000..25585fa0
> --- /dev/null
> +++ b/tests/xfs/719.out
> @@ -0,0 +1,2 @@
> +QA output created by 719
> +Silence is golden
> diff --git a/tests/xfs/720 b/tests/xfs/720
> new file mode 100755
> index 00000000..a917e9a6
> --- /dev/null
> +++ b/tests/xfs/720
> @@ -0,0 +1,64 @@
> +#! /bin/bash
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +# Copyright (c) 2020 Oracle. All Rights Reserved.
> +#
> +# FS QA Test 720
> +#
> +# Test formatting with conflicts between the config file and the cli.
> +#
> +seq=`basename $0`
> +seqres=$RESULT_DIR/$seq
> +echo "QA output created by $seq"
> +
> +here=`pwd`
> +tmp=/tmp/$$
> +status=1 # failure is the default!
> +trap '_cleanup; exit $status' 0 1 2 3 15
> +
> +_cleanup()
> +{
> + cd /
> + rm -f $tmp.* $def_cfgfile
> +}
> +
> +# get standard environment, filters and checks
> +. ./common/rc
> +. ./common/filter
> +
> +# remove previous $seqres.full before test
> +rm -f $seqres.full
> +
> +# real QA test starts here
> +
> +# Modify as appropriate.
> +_supported_fs generic
> +_require_test
> +_require_scratch_nocheck
> +_require_xfs_mkfs_cfgfile
> +
> +cfgfile=$TEST_DIR/a
> +rm -rf $cfgfile
> +
> +# disable crc in config file, enable rmapbt (which requires crc=1) in cli
> +cat > $cfgfile << ENDL
> +[metadata]
> +crc = 0
> +ENDL
> +
> +$MKFS_XFS_PROG -c options=$cfgfile -f -m rmapbt=1 $SCRATCH_DEV > $tmp.mkfs 2>&1
> +cat $tmp.mkfs >> $seqres.full
> +grep 'rmapbt not supported without CRC support' $tmp.mkfs
> +
> +# enable rmapbt (which requires crc=1) in config file, disable crc in cli
> +cat > $cfgfile << ENDL
> +[metadata]
> +rmapbt = 1
> +ENDL
> +
> +$MKFS_XFS_PROG -c options=$cfgfile -f -m crc=0 $SCRATCH_DEV > $tmp.mkfs 2>&1
> +cat $tmp.mkfs >> $seqres.full
> +grep 'rmapbt not supported without CRC support' $tmp.mkfs
> +
> +# success, all done
> +status=0
> +exit
> diff --git a/tests/xfs/720.out b/tests/xfs/720.out
> new file mode 100644
> index 00000000..1d2cf2ef
> --- /dev/null
> +++ b/tests/xfs/720.out
> @@ -0,0 +1,3 @@
> +QA output created by 720
> +rmapbt not supported without CRC support
> +rmapbt not supported without CRC support
> diff --git a/tests/xfs/group b/tests/xfs/group
> index b89c0a4e..4d558e22 100644
> --- a/tests/xfs/group
> +++ b/tests/xfs/group
> @@ -519,3 +519,8 @@
> 519 auto quick reflink
> 520 auto quick reflink
> 521 auto quick realtime growfs
> +716 auto quick mkfs
> +717 auto quick mkfs
> +718 auto quick mkfs
> +719 auto quick mkfs
> +720 auto quick mkfs
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] xfs: test mkfs.xfs config files
2020-10-29 21:27 ` Darrick J. Wong
@ 2021-01-16 1:46 ` Darrick J. Wong
2021-01-17 23:18 ` Dave Chinner
0 siblings, 1 reply; 6+ messages in thread
From: Darrick J. Wong @ 2021-01-16 1:46 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: Dave Chinner, fstests, linux-xfs
On Thu, Oct 29, 2020 at 02:27:13PM -0700, Darrick J. Wong wrote:
> On Wed, Oct 28, 2020 at 07:54:50AM +1100, Dave Chinner wrote:
> > From: "Darrick J. Wong" <darrick.wong@oracle.com>
> >
> > Simple tests of the upcoming mkfs.xfs config file feature. First we
> > have some simple tests of properly formatted config files, then
> > improperly formatted config files, and finally we try to spot
> > conflicts between config file options and the cli.
> >
> > [dchinner: updated for new libinih-based implementation.]
> >
> > Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
> > Signed-off-by: Dave Chinner <dchinner@redhat.com>
> > ---
> > common/xfs | 10 +++
> > tests/xfs/716 | 219 ++++++++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/716.out | 16 ++++
> > tests/xfs/717 | 195 +++++++++++++++++++++++++++++++++++++++++
> > tests/xfs/717.out | 13 +++
> > tests/xfs/718 | 65 ++++++++++++++
> > tests/xfs/718.out | 2 +
> > tests/xfs/719 | 62 +++++++++++++
> > tests/xfs/719.out | 2 +
> > tests/xfs/720 | 64 ++++++++++++++
> > tests/xfs/720.out | 3 +
> > tests/xfs/group | 5 ++
> > 12 files changed, 656 insertions(+)
> > create mode 100755 tests/xfs/716
> > create mode 100644 tests/xfs/716.out
> > create mode 100755 tests/xfs/717
> > create mode 100644 tests/xfs/717.out
> > create mode 100755 tests/xfs/718
> > create mode 100644 tests/xfs/718.out
> > create mode 100755 tests/xfs/719
> > create mode 100644 tests/xfs/719.out
> > create mode 100755 tests/xfs/720
> > create mode 100644 tests/xfs/720.out
> >
> > diff --git a/common/xfs b/common/xfs
> > index 79dab058..abfd8a15 100644
> > --- a/common/xfs
> > +++ b/common/xfs
> > @@ -700,6 +700,16 @@ _require_xfs_mkfs_ciname()
> > || _notrun "need case-insensitive naming support in mkfs.xfs"
> > }
> >
> > +# this test requires mkfs.xfs have configuration file support
> > +_require_xfs_mkfs_cfgfile()
> > +{
> > + echo > /tmp/a
> > + _scratch_mkfs_xfs_supported -c options=/tmp/a >/dev/null 2>&1
> > + res=$?
> > + rm -rf /tmp/a
> > + test $res -eq 0 || _notrun "need configuration file support in mkfs.xfs"
> > +}
> > +
> > # XFS_DEBUG requirements
> > _require_xfs_debug()
> > {
> > diff --git a/tests/xfs/716 b/tests/xfs/716
> > new file mode 100755
> > index 00000000..d8ee7350
> > --- /dev/null
> > +++ b/tests/xfs/716
> > @@ -0,0 +1,219 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2020 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 716
> > +#
> > +# Feed valid mkfs config files to the mkfs parser to ensure that they are
> > +# recognized as valid.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap '_cleanup; exit $status' 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.* $def_cfgfile $fsimg
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +_require_test
> > +_require_scratch_nocheck
> > +_require_xfs_mkfs_cfgfile
> > +
> > +def_cfgfile=$TEST_DIR/a
> > +fsimg=$TEST_DIR/a.img
> > +rm -rf $def_cfgfile $fsimg
> > +truncate -s 20t $fsimg
> > +
> > +test_mkfs_config() {
> > + local cfgfile="$1"
> > + if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
> > + cfgfile=$def_cfgfile
> > + cat > $cfgfile
> > + fi
> > + $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
> > + cat $tmp.err | _filter_test_dir
> > +}
> > +
> > +echo Simplest config file
> > +cat > $def_cfgfile << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config $def_cfgfile
> > +
> > +echo Piped-in config file
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 1
> > +ENDL
> > +
> > +echo Full line comment
> > +test_mkfs_config << ENDL
> > +# This is a full line comment.
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + # This is a full line comment.
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +#This is a full line comment.
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +
> > +echo End of line comment
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0 ; This is an eol comment.
>
> Hey, wait a minute, the manpage didn't say I could use semicolon
> comments! :)
>
> The libinih page https://github.com/benhoyt/inih says you can though.
>
> Would you mind making a note of that in patch 5 above, please?
Ping? The mkfs code has been merged upstream; we ought to land the
functionality tests.
--D
> --D
>
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0 ;This is an eol comment.
> > +ENDL
> > +
> > +echo Multiple directives
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +finobt = 0
> > +ENDL
> > +
> > +echo Multiple sections
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +
> > +[inode]
> > +sparse = 0
> > +ENDL
> > +
> > +echo No directives at all
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +ENDL
> > +
> > +echo Space around the section name
> > +test_mkfs_config << ENDL
> > + [metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [metadata]
> > +crc = 0
> > +ENDL
> > +
> > +echo Single space around the key/value directive
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc=0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc =0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc= 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc=0
> > +ENDL
> > +
> > +echo Two spaces around the key/value directive
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc =0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc= 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc=0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc =0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc= 0
> > +ENDL
> > +
> > +echo Three spaces around the key/value directive
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc= 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +
> > +echo Four spaces around the key/value directive
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc = 0
> > +ENDL
> > +
> > +echo Arbitrary spaces and tabs
> > +test_mkfs_config << ENDL
> > +[metadata]
> > + crc = 0
> > +ENDL
> > +
> > +echo ambiguous comment/section names
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +#[data]
> > +crc = 0
> > +ENDL
> > +
> > +echo ambiguous comment/variable names
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +#foo = 0 ; is this a comment or a key '#foo' ?
> > +ENDL
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/716.out b/tests/xfs/716.out
> > new file mode 100644
> > index 00000000..4c6e9fad
> > --- /dev/null
> > +++ b/tests/xfs/716.out
> > @@ -0,0 +1,16 @@
> > +QA output created by 716
> > +Simplest config file
> > +Piped-in config file
> > +Full line comment
> > +End of line comment
> > +Multiple directives
> > +Multiple sections
> > +No directives at all
> > +Space around the section name
> > +Single space around the key/value directive
> > +Two spaces around the key/value directive
> > +Three spaces around the key/value directive
> > +Four spaces around the key/value directive
> > +Arbitrary spaces and tabs
> > +ambiguous comment/section names
> > +ambiguous comment/variable names
> > diff --git a/tests/xfs/717 b/tests/xfs/717
> > new file mode 100755
> > index 00000000..031d59f1
> > --- /dev/null
> > +++ b/tests/xfs/717
> > @@ -0,0 +1,195 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2020 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 717
> > +#
> > +# Feed invalid mkfs config files to the mkfs parser to ensure that they are
> > +# recognized as invalid.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap '_cleanup; exit $status' 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.* $def_cfgfile $fsimg
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +_require_test
> > +_require_scratch_nocheck
> > +_require_xfs_mkfs_cfgfile
> > +
> > +def_cfgfile=$TEST_DIR/a
> > +fsimg=$TEST_DIR/a.img
> > +rm -rf $def_cfgfile $fsimg
> > +truncate -s 20t $fsimg
> > +
> > +test_mkfs_config() {
> > + local cfgfile="$1"
> > + if [ -z "$cfgfile" ] || [ "$cfgfile" = "-" ]; then
> > + cfgfile=$def_cfgfile
> > + cat > $cfgfile
> > + fi
> > + $MKFS_XFS_PROG -c options=$cfgfile -f -N $fsimg >> $seqres.full 2> $tmp.err
> > + if [ $? -eq 0 ]; then
> > + echo "Test passed, should have failed! Config file parameters:"
> > + cat $cfgfile
> > + fi
> > +}
> > +
> > +echo Spaces in a section name
> > +test_mkfs_config << ENDL
> > +[meta data]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[meta data]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[ metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[ metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[ metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [ metadata]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [ metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [ metadata ]
> > +crc = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > + [ metadata ]
> > +crc = 0
> > +ENDL
> > +
> > +echo Spaces in the middle of a key name
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +c rc = 0
> > +ENDL
> > +
> > +echo Invalid value
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = waffles
> > +ENDL
> > +
> > +echo Nonexistent sections
> > +test_mkfs_config << ENDL
> > +[goober]
> > +crc = 0
> > +ENDL
> > +
> > +echo Nonexistent keys
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +goober = 0
> > +ENDL
> > +
> > +echo Only zero or one
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 50
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = -1
> > +ENDL
> > +
> > +echo sysctl style files
> > +test_mkfs_config << ENDL
> > +metadata.crc = 1
> > +ENDL
> > +
> > +echo binaries
> > +test_mkfs_config $MKFS_XFS_PROG 2>&1 | sed -e "s#$MKFS_XFS_PROG#MKFS_XFS_PROG#g"
> > +
> > +echo respecified options
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +crc = 1
> > +ENDL
> > +
> > +echo respecified sections
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0
> > +[metadata]
> > +crc = 1
> > +ENDL
> > +
> > +echo ambiguous comment/section names
> > +test_mkfs_config << ENDL
> > +[meta#data]
> > +crc = 0
> > +ENDL
> > +
> > +echo ambiguous comment/variable names
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +fo#o = 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +foo#=# 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +foo =# 0
> > +ENDL
> > +test_mkfs_config << ENDL
> > +[metadata]
> > +crc = 0;This is an eol comment.
> > +ENDL
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/717.out b/tests/xfs/717.out
> > new file mode 100644
> > index 00000000..61fff561
> > --- /dev/null
> > +++ b/tests/xfs/717.out
> > @@ -0,0 +1,13 @@
> > +QA output created by 717
> > +Spaces in a section name
> > +Spaces in the middle of a key name
> > +Invalid value
> > +Nonexistent sections
> > +Nonexistent keys
> > +Only zero or one
> > +sysctl style files
> > +binaries
> > +respecified options
> > +respecified sections
> > +ambiguous comment/section names
> > +ambiguous comment/variable names
> > diff --git a/tests/xfs/718 b/tests/xfs/718
> > new file mode 100755
> > index 00000000..e2beca41
> > --- /dev/null
> > +++ b/tests/xfs/718
> > @@ -0,0 +1,65 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2020 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 718
> > +#
> > +# Test formatting with a well known config file.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap '_cleanup; exit $status' 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.* $def_cfgfile $fsimg
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +_require_test
> > +_require_scratch_nocheck
> > +_require_xfs_mkfs_cfgfile
> > +
> > +echo "Silence is golden"
> > +
> > +def_cfgfile=$TEST_DIR/a
> > +fsimg=$TEST_DIR/a.img
> > +rm -rf $def_cfgfile $fsimg
> > +truncate -s 20t $fsimg
> > +
> > +cat > $def_cfgfile << ENDL
> > +[metadata]
> > +crc = 1
> > +rmapbt = 1
> > +reflink = 1
> > +
> > +[inode]
> > +sparse = 1
> > +ENDL
> > +
> > +$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs
> > +cat $tmp.mkfs >> $seqres.full
> > +grep -q 'crc=1' $tmp.mkfs || echo 'v5 not enabled'
> > +grep -q 'rmapbt=1' $tmp.mkfs || echo 'rmap not enabled'
> > +grep -q 'reflink=1' $tmp.mkfs || echo 'reflink not enabled'
> > +grep -q 'sparse=1' $tmp.mkfs || echo 'sparse inodes not enabled'
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/718.out b/tests/xfs/718.out
> > new file mode 100644
> > index 00000000..1dad5ab3
> > --- /dev/null
> > +++ b/tests/xfs/718.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 718
> > +Silence is golden
> > diff --git a/tests/xfs/719 b/tests/xfs/719
> > new file mode 100755
> > index 00000000..15ff3f27
> > --- /dev/null
> > +++ b/tests/xfs/719
> > @@ -0,0 +1,62 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2020 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 719
> > +#
> > +# Test formatting with a config file that contains conflicting options.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap '_cleanup; exit $status' 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.* $def_cfgfile
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +_require_test
> > +_require_scratch_nocheck
> > +_require_xfs_mkfs_cfgfile
> > +
> > +echo "Silence is golden"
> > +
> > +def_cfgfile=$TEST_DIR/a
> > +rm -rf $def_cfgfile
> > +
> > +cat > $def_cfgfile << ENDL
> > +[metadata]
> > +crc = 0
> > +rmapbt = 1
> > +reflink = 1
> > +
> > +[inode]
> > +sparse = 1
> > +ENDL
> > +
> > +$MKFS_XFS_PROG -c options=$def_cfgfile -f $SCRATCH_DEV > $tmp.mkfs 2>&1
> > +if [ $? -eq 0 ]; then
> > + echo "mkfs.xfs did not fail!"
> > + cat $tmp.mkfs
> > +fi
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/719.out b/tests/xfs/719.out
> > new file mode 100644
> > index 00000000..25585fa0
> > --- /dev/null
> > +++ b/tests/xfs/719.out
> > @@ -0,0 +1,2 @@
> > +QA output created by 719
> > +Silence is golden
> > diff --git a/tests/xfs/720 b/tests/xfs/720
> > new file mode 100755
> > index 00000000..a917e9a6
> > --- /dev/null
> > +++ b/tests/xfs/720
> > @@ -0,0 +1,64 @@
> > +#! /bin/bash
> > +# SPDX-License-Identifier: GPL-2.0-or-later
> > +# Copyright (c) 2020 Oracle. All Rights Reserved.
> > +#
> > +# FS QA Test 720
> > +#
> > +# Test formatting with conflicts between the config file and the cli.
> > +#
> > +seq=`basename $0`
> > +seqres=$RESULT_DIR/$seq
> > +echo "QA output created by $seq"
> > +
> > +here=`pwd`
> > +tmp=/tmp/$$
> > +status=1 # failure is the default!
> > +trap '_cleanup; exit $status' 0 1 2 3 15
> > +
> > +_cleanup()
> > +{
> > + cd /
> > + rm -f $tmp.* $def_cfgfile
> > +}
> > +
> > +# get standard environment, filters and checks
> > +. ./common/rc
> > +. ./common/filter
> > +
> > +# remove previous $seqres.full before test
> > +rm -f $seqres.full
> > +
> > +# real QA test starts here
> > +
> > +# Modify as appropriate.
> > +_supported_fs generic
> > +_require_test
> > +_require_scratch_nocheck
> > +_require_xfs_mkfs_cfgfile
> > +
> > +cfgfile=$TEST_DIR/a
> > +rm -rf $cfgfile
> > +
> > +# disable crc in config file, enable rmapbt (which requires crc=1) in cli
> > +cat > $cfgfile << ENDL
> > +[metadata]
> > +crc = 0
> > +ENDL
> > +
> > +$MKFS_XFS_PROG -c options=$cfgfile -f -m rmapbt=1 $SCRATCH_DEV > $tmp.mkfs 2>&1
> > +cat $tmp.mkfs >> $seqres.full
> > +grep 'rmapbt not supported without CRC support' $tmp.mkfs
> > +
> > +# enable rmapbt (which requires crc=1) in config file, disable crc in cli
> > +cat > $cfgfile << ENDL
> > +[metadata]
> > +rmapbt = 1
> > +ENDL
> > +
> > +$MKFS_XFS_PROG -c options=$cfgfile -f -m crc=0 $SCRATCH_DEV > $tmp.mkfs 2>&1
> > +cat $tmp.mkfs >> $seqres.full
> > +grep 'rmapbt not supported without CRC support' $tmp.mkfs
> > +
> > +# success, all done
> > +status=0
> > +exit
> > diff --git a/tests/xfs/720.out b/tests/xfs/720.out
> > new file mode 100644
> > index 00000000..1d2cf2ef
> > --- /dev/null
> > +++ b/tests/xfs/720.out
> > @@ -0,0 +1,3 @@
> > +QA output created by 720
> > +rmapbt not supported without CRC support
> > +rmapbt not supported without CRC support
> > diff --git a/tests/xfs/group b/tests/xfs/group
> > index b89c0a4e..4d558e22 100644
> > --- a/tests/xfs/group
> > +++ b/tests/xfs/group
> > @@ -519,3 +519,8 @@
> > 519 auto quick reflink
> > 520 auto quick reflink
> > 521 auto quick realtime growfs
> > +716 auto quick mkfs
> > +717 auto quick mkfs
> > +718 auto quick mkfs
> > +719 auto quick mkfs
> > +720 auto quick mkfs
> > --
> > 2.28.0
> >
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH] xfs: test mkfs.xfs config files
2021-01-16 1:46 ` Darrick J. Wong
@ 2021-01-17 23:18 ` Dave Chinner
2021-01-18 4:27 ` Darrick J. Wong
0 siblings, 1 reply; 6+ messages in thread
From: Dave Chinner @ 2021-01-17 23:18 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: fstests, linux-xfs
On Fri, Jan 15, 2021 at 05:46:07PM -0800, Darrick J. Wong wrote:
> On Thu, Oct 29, 2020 at 02:27:13PM -0700, Darrick J. Wong wrote:
> > On Wed, Oct 28, 2020 at 07:54:50AM +1100, Dave Chinner wrote:
> > > +echo End of line comment
> > > +test_mkfs_config << ENDL
> > > +[metadata]
> > > +crc = 0 ; This is an eol comment.
> >
> > Hey, wait a minute, the manpage didn't say I could use semicolon
> > comments! :)
> >
> > The libinih page https://github.com/benhoyt/inih says you can though.
> >
> > Would you mind making a note of that in patch 5 above, please?
>
> Ping? The mkfs code has been merged upstream; we ought to land the
> functionality tests.
Nothing in this patch needs to change, AFAIA, because you were
referring to the xfsprogs mkfs patchset in your comment. So this
is really only waiting on review, right? Do I need to repost it?
-Dave.
--
Dave Chinner
david@fromorbit.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] xfs: test mkfs.xfs config files
2021-01-17 23:18 ` Dave Chinner
@ 2021-01-18 4:27 ` Darrick J. Wong
2021-01-24 13:33 ` Eryu Guan
0 siblings, 1 reply; 6+ messages in thread
From: Darrick J. Wong @ 2021-01-18 4:27 UTC (permalink / raw)
To: Dave Chinner; +Cc: fstests, linux-xfs
On Mon, Jan 18, 2021 at 10:18:48AM +1100, Dave Chinner wrote:
> On Fri, Jan 15, 2021 at 05:46:07PM -0800, Darrick J. Wong wrote:
> > On Thu, Oct 29, 2020 at 02:27:13PM -0700, Darrick J. Wong wrote:
> > > On Wed, Oct 28, 2020 at 07:54:50AM +1100, Dave Chinner wrote:
> > > > +echo End of line comment
> > > > +test_mkfs_config << ENDL
> > > > +[metadata]
> > > > +crc = 0 ; This is an eol comment.
> > >
> > > Hey, wait a minute, the manpage didn't say I could use semicolon
> > > comments! :)
> > >
> > > The libinih page https://github.com/benhoyt/inih says you can though.
> > >
> > > Would you mind making a note of that in patch 5 above, please?
> >
> > Ping? The mkfs code has been merged upstream; we ought to land the
> > functionality tests.
>
> Nothing in this patch needs to change, AFAIA, because you were
> referring to the xfsprogs mkfs patchset in your comment. So this
> is really only waiting on review, right? Do I need to repost it?
Probably, as it's entirely possible that it's gotten lost in Eryu's mail
stream.
--D
> -Dave.
> --
> Dave Chinner
> david@fromorbit.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] xfs: test mkfs.xfs config files
2021-01-18 4:27 ` Darrick J. Wong
@ 2021-01-24 13:33 ` Eryu Guan
0 siblings, 0 replies; 6+ messages in thread
From: Eryu Guan @ 2021-01-24 13:33 UTC (permalink / raw)
To: Darrick J. Wong; +Cc: Dave Chinner, fstests, linux-xfs
On Sun, Jan 17, 2021 at 08:27:04PM -0800, Darrick J. Wong wrote:
> On Mon, Jan 18, 2021 at 10:18:48AM +1100, Dave Chinner wrote:
> > On Fri, Jan 15, 2021 at 05:46:07PM -0800, Darrick J. Wong wrote:
> > > On Thu, Oct 29, 2020 at 02:27:13PM -0700, Darrick J. Wong wrote:
> > > > On Wed, Oct 28, 2020 at 07:54:50AM +1100, Dave Chinner wrote:
> > > > > +echo End of line comment
> > > > > +test_mkfs_config << ENDL
> > > > > +[metadata]
> > > > > +crc = 0 ; This is an eol comment.
> > > >
> > > > Hey, wait a minute, the manpage didn't say I could use semicolon
> > > > comments! :)
> > > >
> > > > The libinih page https://github.com/benhoyt/inih says you can though.
> > > >
> > > > Would you mind making a note of that in patch 5 above, please?
> > >
> > > Ping? The mkfs code has been merged upstream; we ought to land the
> > > functionality tests.
> >
> > Nothing in this patch needs to change, AFAIA, because you were
> > referring to the xfsprogs mkfs patchset in your comment. So this
> > is really only waiting on review, right? Do I need to repost it?
>
> Probably, as it's entirely possible that it's gotten lost in Eryu's mail
> stream.
You were right, it's lost in my 'to-review' queue.. Thanks for the
reminder!
I did some minor modifications to the patches, such as update supported
fs from 'generic' to 'xfs', and change truncate command to $XFS_IO_PROG
-c "truncate".
Thanks,
Eryu
>
> --D
>
> > -Dave.
> > --
> > Dave Chinner
> > david@fromorbit.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-01-24 13:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-27 20:54 [PATCH] xfs: test mkfs.xfs config files Dave Chinner
2020-10-29 21:27 ` Darrick J. Wong
2021-01-16 1:46 ` Darrick J. Wong
2021-01-17 23:18 ` Dave Chinner
2021-01-18 4:27 ` Darrick J. Wong
2021-01-24 13:33 ` Eryu Guan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).