* [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx @ 2023-03-01 3:06 xiubli 2023-03-01 15:55 ` Darrick J. Wong 2023-03-02 15:38 ` Zorro Lang 0 siblings, 2 replies; 4+ messages in thread From: xiubli @ 2023-03-01 3:06 UTC (permalink / raw) To: fstests; +Cc: david, djwong, ceph-devel, vshankar, zlang, Xiubo Li From: Xiubo Li <xiubli@redhat.com> We need to save the result of the 'fsx' temporarily. Fixes: https://tracker.ceph.com/issues/58834 Signed-off-by: Xiubo Li <xiubli@redhat.com> --- tests/generic/075 | 6 ++++-- tests/generic/112 | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) diff --git a/tests/generic/075 b/tests/generic/075 index 03a394a6..bc3a11c7 100755 --- a/tests/generic/075 +++ b/tests/generic/075 @@ -53,9 +53,11 @@ _do_test() # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) cd $out - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null + $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null + local res=$? + if [ $res -ne 0 ] then - echo " fsx ($_param) failed, $? - compare $seqres.$_n.{good,bad,fsxlog}" + echo " fsx ($_param) failed, $res - compare $seqres.$_n.{good,bad,fsxlog}" mv $out/$seq.$_n $seqres.$_n.full od -xAx $seqres.$_n.full > $seqres.$_n.bad od -xAx "$RESULT_DIR"/$seq.$_n.fsxgood > $seqres.$_n.good diff --git a/tests/generic/112 b/tests/generic/112 index 971d0467..0e08cbf9 100755 --- a/tests/generic/112 +++ b/tests/generic/112 @@ -53,9 +53,11 @@ _do_test() # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) cd $out - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null + $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null + local res=$? + if [ $res -ne 0 ] then - echo " fsx ($_param) returned $? - see $seq.$_n.full" + echo " fsx ($_param) returned $res - see $seq.$_n.full" mv "$RESULT_DIR"/$seq.$_n.fsxlog $seqres.$_n.full status=1 exit -- 2.31.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx 2023-03-01 3:06 [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx xiubli @ 2023-03-01 15:55 ` Darrick J. Wong 2023-03-02 15:38 ` Zorro Lang 1 sibling, 0 replies; 4+ messages in thread From: Darrick J. Wong @ 2023-03-01 15:55 UTC (permalink / raw) To: xiubli; +Cc: fstests, david, ceph-devel, vshankar, zlang On Wed, Mar 01, 2023 at 11:06:20AM +0800, xiubli@redhat.com wrote: > From: Xiubo Li <xiubli@redhat.com> > > We need to save the result of the 'fsx' temporarily. > > Fixes: https://tracker.ceph.com/issues/58834 > Signed-off-by: Xiubo Li <xiubli@redhat.com> > --- > tests/generic/075 | 6 ++++-- > tests/generic/112 | 6 ++++-- > 2 files changed, 8 insertions(+), 4 deletions(-) > > diff --git a/tests/generic/075 b/tests/generic/075 > index 03a394a6..bc3a11c7 100755 > --- a/tests/generic/075 > +++ b/tests/generic/075 > @@ -53,9 +53,11 @@ _do_test() > > # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) > cd $out > - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null > + $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null > + local res=$? > + if [ $res -ne 0 ] > then > - echo " fsx ($_param) failed, $? - compare $seqres.$_n.{good,bad,fsxlog}" > + echo " fsx ($_param) failed, $res - compare $seqres.$_n.{good,bad,fsxlog}" Heh, oops. Reviewed-by: Darrick J. Wong <djwong@kernel.org> --D > mv $out/$seq.$_n $seqres.$_n.full > od -xAx $seqres.$_n.full > $seqres.$_n.bad > od -xAx "$RESULT_DIR"/$seq.$_n.fsxgood > $seqres.$_n.good > diff --git a/tests/generic/112 b/tests/generic/112 > index 971d0467..0e08cbf9 100755 > --- a/tests/generic/112 > +++ b/tests/generic/112 > @@ -53,9 +53,11 @@ _do_test() > > # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) > cd $out > - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null > + $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null > + local res=$? > + if [ $res -ne 0 ] > then > - echo " fsx ($_param) returned $? - see $seq.$_n.full" > + echo " fsx ($_param) returned $res - see $seq.$_n.full" > mv "$RESULT_DIR"/$seq.$_n.fsxlog $seqres.$_n.full > status=1 > exit > -- > 2.31.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx 2023-03-01 3:06 [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx xiubli 2023-03-01 15:55 ` Darrick J. Wong @ 2023-03-02 15:38 ` Zorro Lang 2023-03-08 2:59 ` Xiubo Li 1 sibling, 1 reply; 4+ messages in thread From: Zorro Lang @ 2023-03-02 15:38 UTC (permalink / raw) To: xiubli; +Cc: fstests, david, djwong, ceph-devel, vshankar On Wed, Mar 01, 2023 at 11:06:20AM +0800, xiubli@redhat.com wrote: > From: Xiubo Li <xiubli@redhat.com> > > We need to save the result of the 'fsx' temporarily. > > Fixes: https://tracker.ceph.com/issues/58834 > Signed-off-by: Xiubo Li <xiubli@redhat.com> > --- Hmm... how did you generate this patch? Did you change something before you send this patch out? I can't merge it simply, always got below errors [1] [2]. May you help to generate this patch again purely? (Of course you can keep the RVB of Darrick) Thanks, Zorro [1] $ git am ./20230301_xiubli_generic_075_112_fix_printing_the_incorrect_return_value_of_fsx.mbx Applying: generic/{075,112}: fix printing the incorrect return value of fsx error: patch failed: tests/generic/075:53 error: tests/generic/075: patch does not apply Patch failed at 0001 generic/{075,112}: fix printing the incorrect return value of fsx hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". [2] $ git am -3 ./20230301_xiubli_generic_075_112_fix_printing_the_incorrect_return_value_of_fsx.mbx Applying: generic/{075,112}: fix printing the incorrect return value of fsx error: sha1 information is lacking or useless (tests/generic/075). error: could not build fake ancestor Patch failed at 0001 generic/{075,112}: fix printing the incorrect return value of fsx hint: Use 'git am --show-current-patch=diff' to see the failed patch When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To restore the original branch and stop patching, run "git am --abort". > tests/generic/075 | 6 ++++-- > tests/generic/112 | 6 ++++-- > 2 files changed, 8 insertions(+), 4 deletions(-) > > diff --git a/tests/generic/075 b/tests/generic/075 > index 03a394a6..bc3a11c7 100755 > --- a/tests/generic/075 > +++ b/tests/generic/075 > @@ -53,9 +53,11 @@ _do_test() > > # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) > cd $out > - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null > + $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null > + local res=$? > + if [ $res -ne 0 ] > then > - echo " fsx ($_param) failed, $? - compare $seqres.$_n.{good,bad,fsxlog}" > + echo " fsx ($_param) failed, $res - compare $seqres.$_n.{good,bad,fsxlog}" > mv $out/$seq.$_n $seqres.$_n.full > od -xAx $seqres.$_n.full > $seqres.$_n.bad > od -xAx "$RESULT_DIR"/$seq.$_n.fsxgood > $seqres.$_n.good > diff --git a/tests/generic/112 b/tests/generic/112 > index 971d0467..0e08cbf9 100755 > --- a/tests/generic/112 > +++ b/tests/generic/112 > @@ -53,9 +53,11 @@ _do_test() > > # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) > cd $out > - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null > + $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null > + local res=$? > + if [ $res -ne 0 ] > then > - echo " fsx ($_param) returned $? - see $seq.$_n.full" > + echo " fsx ($_param) returned $res - see $seq.$_n.full" > mv "$RESULT_DIR"/$seq.$_n.fsxlog $seqres.$_n.full > status=1 > exit > -- > 2.31.1 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx 2023-03-02 15:38 ` Zorro Lang @ 2023-03-08 2:59 ` Xiubo Li 0 siblings, 0 replies; 4+ messages in thread From: Xiubo Li @ 2023-03-08 2:59 UTC (permalink / raw) To: Zorro Lang; +Cc: fstests, david, djwong, ceph-devel, vshankar On 02/03/2023 23:38, Zorro Lang wrote: > On Wed, Mar 01, 2023 at 11:06:20AM +0800, xiubli@redhat.com wrote: >> From: Xiubo Li <xiubli@redhat.com> >> >> We need to save the result of the 'fsx' temporarily. >> >> Fixes: https://tracker.ceph.com/issues/58834 >> Signed-off-by: Xiubo Li <xiubli@redhat.com> >> --- > Hmm... how did you generate this patch? Did you change something before you > send this patch out? I can't merge it simply, always got below errors [1] [2]. > May you help to generate this patch again purely? Hi Zorro, Sorry I missed this. Actually this will depend on the previous patch: "generic/075: no need to move the .fsxlog to the same directory" I forgot to mention that. Thanks - Xiubo > (Of course you can keep the RVB of Darrick) > > Thanks, > Zorro > > [1] > $ git am ./20230301_xiubli_generic_075_112_fix_printing_the_incorrect_return_value_of_fsx.mbx > Applying: generic/{075,112}: fix printing the incorrect return value of fsx > error: patch failed: tests/generic/075:53 > error: tests/generic/075: patch does not apply > Patch failed at 0001 generic/{075,112}: fix printing the incorrect return value of fsx > hint: Use 'git am --show-current-patch=diff' to see the failed patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort". > > [2] > $ git am -3 ./20230301_xiubli_generic_075_112_fix_printing_the_incorrect_return_value_of_fsx.mbx > Applying: generic/{075,112}: fix printing the incorrect return value of fsx > error: sha1 information is lacking or useless (tests/generic/075). > error: could not build fake ancestor > Patch failed at 0001 generic/{075,112}: fix printing the incorrect return value of fsx > hint: Use 'git am --show-current-patch=diff' to see the failed patch > When you have resolved this problem, run "git am --continue". > If you prefer to skip this patch, run "git am --skip" instead. > To restore the original branch and stop patching, run "git am --abort". > >> tests/generic/075 | 6 ++++-- >> tests/generic/112 | 6 ++++-- >> 2 files changed, 8 insertions(+), 4 deletions(-) >> >> diff --git a/tests/generic/075 b/tests/generic/075 >> index 03a394a6..bc3a11c7 100755 >> --- a/tests/generic/075 >> +++ b/tests/generic/075 >> @@ -53,9 +53,11 @@ _do_test() >> >> # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) >> cd $out >> - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null >> + $here/ltp/fsx $_param -P "$RESULT_DIR" $seq.$_n $FSX_AVOID &>/dev/null >> + local res=$? >> + if [ $res -ne 0 ] >> then >> - echo " fsx ($_param) failed, $? - compare $seqres.$_n.{good,bad,fsxlog}" >> + echo " fsx ($_param) failed, $res - compare $seqres.$_n.{good,bad,fsxlog}" >> mv $out/$seq.$_n $seqres.$_n.full >> od -xAx $seqres.$_n.full > $seqres.$_n.bad >> od -xAx "$RESULT_DIR"/$seq.$_n.fsxgood > $seqres.$_n.good >> diff --git a/tests/generic/112 b/tests/generic/112 >> index 971d0467..0e08cbf9 100755 >> --- a/tests/generic/112 >> +++ b/tests/generic/112 >> @@ -53,9 +53,11 @@ _do_test() >> >> # This cd and use of -P gets full debug on "$RESULT_DIR" (not TEST_DEV) >> cd $out >> - if ! $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null >> + $here/ltp/fsx $_param -P "$RESULT_DIR" $FSX_AVOID $seq.$_n &>/dev/null >> + local res=$? >> + if [ $res -ne 0 ] >> then >> - echo " fsx ($_param) returned $? - see $seq.$_n.full" >> + echo " fsx ($_param) returned $res - see $seq.$_n.full" >> mv "$RESULT_DIR"/$seq.$_n.fsxlog $seqres.$_n.full >> status=1 >> exit >> -- >> 2.31.1 >> -- Best Regards, Xiubo Li (李秀波) Email: xiubli@redhat.com/xiubli@ibm.com Slack: @Xiubo Li ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2023-03-08 3:01 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2023-03-01 3:06 [PATCH] generic/{075,112}: fix printing the incorrect return value of fsx xiubli 2023-03-01 15:55 ` Darrick J. Wong 2023-03-02 15:38 ` Zorro Lang 2023-03-08 2:59 ` Xiubo Li
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).