From: Jeff King <peff@peff.net>
To: git@vger.kernel.org
Subject: [PATCH 12/25] t: avoid using ":" for comments
Date: Fri, 20 Mar 2015 06:12:37 -0400 [thread overview]
Message-ID: <20150320101237.GL12543@peff.net> (raw)
In-Reply-To: <20150320100429.GA17354@peff.net>
The ":" is not a comment marker, but rather a noop command.
Using it as a comment like:
: do something
cmd1 &&
: something else
cmd2
breaks the &&-chain, and we would fail to notice if "cmd1"
failed in this instance. We can just use regular "#"
comments instead.
Signed-off-by: Jeff King <peff@peff.net>
---
t/t4104-apply-boundary.sh | 18 +++++++++---------
t/t5533-push-cas.sh | 2 +-
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/t/t4104-apply-boundary.sh b/t/t4104-apply-boundary.sh
index c97aad1..497afdc 100755
--- a/t/t4104-apply-boundary.sh
+++ b/t/t4104-apply-boundary.sh
@@ -18,7 +18,7 @@ test_expect_success setup '
cat victim >original &&
git update-index --add victim &&
- : add to the head
+ # add to the head
for i in a b '"$L"' y
do
echo $i
@@ -27,7 +27,7 @@ test_expect_success setup '
git diff victim >add-a-patch.with &&
git diff --unified=0 >add-a-patch.without &&
- : insert at line two
+ # insert at line two
for i in b a '"$L"' y
do
echo $i
@@ -36,7 +36,7 @@ test_expect_success setup '
git diff victim >insert-a-patch.with &&
git diff --unified=0 >insert-a-patch.without &&
- : modify at the head
+ # modify at the head
for i in a '"$L"' y
do
echo $i
@@ -45,16 +45,16 @@ test_expect_success setup '
git diff victim >mod-a-patch.with &&
git diff --unified=0 >mod-a-patch.without &&
- : remove from the head
+ # remove from the head
for i in '"$L"' y
do
echo $i
done >victim &&
cat victim >del-a-expect &&
- git diff victim >del-a-patch.with
+ git diff victim >del-a-patch.with &&
git diff --unified=0 >del-a-patch.without &&
- : add to the tail
+ # add to the tail
for i in b '"$L"' y z
do
echo $i
@@ -63,7 +63,7 @@ test_expect_success setup '
git diff victim >add-z-patch.with &&
git diff --unified=0 >add-z-patch.without &&
- : modify at the tail
+ # modify at the tail
for i in b '"$L"' z
do
echo $i
@@ -72,7 +72,7 @@ test_expect_success setup '
git diff victim >mod-z-patch.with &&
git diff --unified=0 >mod-z-patch.without &&
- : remove from the tail
+ # remove from the tail
for i in b '"$L"'
do
echo $i
@@ -81,7 +81,7 @@ test_expect_success setup '
git diff victim >del-z-patch.with &&
git diff --unified=0 >del-z-patch.without
- : done
+ # done
'
for with in with without
diff --git a/t/t5533-push-cas.sh b/t/t5533-push-cas.sh
index dccf8a6..c402d8d 100755
--- a/t/t5533-push-cas.sh
+++ b/t/t5533-push-cas.sh
@@ -14,7 +14,7 @@ setup_srcdst_basic () {
}
test_expect_success setup '
- : create template repository
+ # create template repository
test_commit A &&
test_commit B &&
test_commit C
--
2.3.3.520.g3cfbb5d
next prev parent reply other threads:[~2015-03-20 10:12 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-20 10:04 [PATCH 0/25] detecting &&-chain breakage Jeff King
2015-03-20 10:05 ` [PATCH 01/25] t/test-lib: introduce --chain-lint option Jeff King
2015-03-25 2:53 ` SZEDER Gábor
2015-03-25 3:05 ` Jeff King
2015-03-20 10:06 ` [PATCH 02/25] t: fix severe &&-chain breakage Jeff King
2015-03-20 10:06 ` [PATCH 03/25] t: fix moderate " Jeff King
2015-03-20 10:07 ` [PATCH 04/25] t: fix trivial " Jeff King
2015-03-20 10:07 ` [PATCH 05/25] t: assume test_cmp produces verbose output Jeff King
2015-03-20 10:09 ` [PATCH 06/25] t: use verbose instead of hand-rolled errors Jeff King
2015-03-20 10:09 ` [PATCH 07/25] t: use test_must_fail instead of hand-rolled blocks Jeff King
2015-03-20 10:10 ` [PATCH 08/25] t: fix &&-chaining issues around setup which might fail Jeff King
2015-03-20 10:11 ` [PATCH 09/25] t: use test_might_fail for diff and grep Jeff King
2015-03-20 10:11 ` [PATCH 10/25] t: use test_expect_code instead of hand-rolled comparison Jeff King
2015-03-20 10:12 ` [PATCH 11/25] t: wrap complicated expect_code users in a block Jeff King
2015-03-20 10:12 ` Jeff King [this message]
2015-03-20 10:12 ` [PATCH 13/25] t3600: fix &&-chain breakage for setup commands Jeff King
2015-03-20 10:12 ` [PATCH 14/25] t7201: fix &&-chain breakage Jeff King
2015-03-20 10:13 ` [PATCH 15/25] t9502: " Jeff King
2015-03-20 17:48 ` Johannes Sixt
2015-03-20 18:03 ` Jeff King
2015-03-20 10:13 ` [PATCH 16/25] t6030: use modern test_* helpers Jeff King
2015-03-20 10:13 ` [PATCH 17/25] t0020: " Jeff King
2015-03-25 0:23 ` SZEDER Gábor
2015-03-25 2:56 ` Jeff King
2015-03-25 5:24 ` [PATCH 0/8] more &&-chaining test fixups Jeff King
2015-03-25 5:25 ` [PATCH 1/8] perf-lib: fix ignored exit code inside loop Jeff King
2015-03-25 5:28 ` [PATCH 2/8] t0020: fix ignored exit code inside loops Jeff King
2015-03-25 5:28 ` [PATCH 3/8] t3305: fix ignored exit code inside loop Jeff King
2015-03-25 8:40 ` Johan Herland
2015-03-25 5:29 ` [PATCH 4/8] t7701: " Jeff King
2015-03-25 5:29 ` [PATCH 5/8] t: fix some trivial cases of ignored exit codes in loops Jeff King
2015-03-25 5:30 ` [PATCH 6/8] t: simplify loop exit-code status variables Jeff King
2015-03-25 17:27 ` Junio C Hamano
2015-03-25 17:43 ` Jeff King
2015-03-25 5:31 ` [PATCH 7/8] t0020: use test_* helpers instead of hand-rolled messages Jeff King
2015-03-25 5:32 ` [PATCH 8/8] t9001: drop save_confirm helper Jeff King
2015-03-25 17:29 ` [PATCH 0/8] more &&-chaining test fixups Junio C Hamano
2015-03-20 10:13 ` [PATCH 18/25] t1301: use modern test_* helpers Jeff King
2015-03-24 23:51 ` SZEDER Gábor
2015-03-25 2:45 ` Jeff King
2015-03-20 10:13 ` [PATCH 19/25] t6034: " Jeff King
2015-03-24 23:43 ` SZEDER Gábor
2015-03-20 10:13 ` [PATCH 20/25] t4117: " Jeff King
2015-03-20 10:13 ` [PATCH 21/25] t9001: use test_when_finished Jeff King
2015-03-25 2:00 ` SZEDER Gábor
2015-03-25 2:47 ` Jeff King
2015-03-20 10:13 ` [PATCH 22/25] t0050: appease --chain-lint Jeff King
2015-03-20 10:13 ` [PATCH 23/25] t7004: fix embedded single-quotes Jeff King
2015-03-20 10:13 ` [PATCH 24/25] t0005: fix broken &&-chains Jeff King
2015-03-20 10:13 ` [PATCH 25/25] t4104: drop hand-rolled error reporting Jeff King
2015-03-20 10:23 ` [PATCH 0/25] detecting &&-chain breakage Jeff King
2015-03-20 14:28 ` Michael J Gruber
2015-03-20 14:32 ` [PATCH 26/27] t/*svn*: fix moderate " Michael J Gruber
2015-03-20 14:32 ` [PATCH 27/27] t9104: fix test for following larger parents Michael J Gruber
2015-03-20 18:04 ` [PATCH 26/27] t/*svn*: fix moderate &&-chain breakage Junio C Hamano
2015-03-20 19:35 ` Junio C Hamano
2015-03-20 20:02 ` Jeff King
2015-03-20 20:13 ` Jeff King
2015-03-23 9:36 ` Michael J Gruber
2015-03-20 17:57 ` [PATCH 0/25] detecting " Jeff King
2015-03-20 17:44 ` Junio C Hamano
2015-03-20 18:00 ` Junio C Hamano
2015-03-20 18:04 ` Jeff King
2015-03-20 18:33 ` Junio C Hamano
2015-03-20 23:18 ` Eric Sunshine
2015-03-21 8:19 ` Jeff King
2015-03-21 18:01 ` Junio C Hamano
2015-03-21 22:23 ` Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150320101237.GL12543@peff.net \
--to=peff@peff.net \
--cc=git@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).