From: Ed Maste <emaste@FreeBSD.org>
To: git mailing list <git@vger.kernel.org>
Cc: Derrick Stolee via GitGitGadget <gitgitgadget@gmail.com>,
Ed Maste <emaste@FreeBSD.org>
Subject: [PATCH] sparse-checkout: improve OS ls compatibility
Date: Thu, 19 Dec 2019 01:58:33 +0000 [thread overview]
Message-ID: <20191219015833.49314-1-emaste@FreeBSD.org> (raw)
On FreeBSD, when executed by root ls enables the '-A' option:
-A Include directory entries whose names begin with a dot (`.')
except for . and ... Automatically set for the super-user unless
-I is specified.
Pipe ls's output to grep -v .git to remove the undesired entry. Also
pass the -1 option to ensure one entry per line.
Signed-off-by: Ed Maste <emaste@FreeBSD.org>
---
There are several different ways this could be solved; this approach
felt cleanest to me, but there are at least two other reasonable
alternatives:
* Add -a to the invocations and .git to the expected output
* Add LSFLAGS and set it to -I on BSDs, to turn off the special dot
behaviour
I'll submit a new patch if a different approach is preferred.
t/t1091-sparse-checkout-builtin.sh | 33 +++++++++++++++++-------------
1 file changed, 19 insertions(+), 14 deletions(-)
diff --git a/t/t1091-sparse-checkout-builtin.sh b/t/t1091-sparse-checkout-builtin.sh
index cee98a1c8a..3a3eafa653 100755
--- a/t/t1091-sparse-checkout-builtin.sh
+++ b/t/t1091-sparse-checkout-builtin.sh
@@ -4,6 +4,11 @@ test_description='sparse checkout builtin tests'
. ./test-lib.sh
+ls_no_git()
+{
+ ls -1 "$1" | grep -v .git
+}
+
test_expect_success 'setup' '
git init repo &&
(
@@ -50,7 +55,7 @@ test_expect_success 'git sparse-checkout init' '
EOF
test_cmp expect repo/.git/info/sparse-checkout &&
test_cmp_config -C repo true core.sparsecheckout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
echo a >expect &&
test_cmp expect dir
'
@@ -73,7 +78,7 @@ test_expect_success 'init with existing sparse-checkout' '
*folder*
EOF
test_cmp expect repo/.git/info/sparse-checkout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
folder1
@@ -90,7 +95,7 @@ test_expect_success 'clone --sparse' '
!/*/
EOF
test_cmp expect actual &&
- ls clone >dir &&
+ ls_no_git clone >dir &&
echo a >expect &&
test_cmp expect dir
'
@@ -119,7 +124,7 @@ test_expect_success 'set sparse-checkout using builtin' '
git -C repo sparse-checkout list >actual &&
test_cmp expect actual &&
test_cmp expect repo/.git/info/sparse-checkout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
folder1
@@ -139,7 +144,7 @@ test_expect_success 'set sparse-checkout using --stdin' '
git -C repo sparse-checkout list >actual &&
test_cmp expect actual &&
test_cmp expect repo/.git/info/sparse-checkout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
folder1
@@ -154,7 +159,7 @@ test_expect_success 'cone mode: match patterns' '
git -C repo read-tree -mu HEAD 2>err &&
test_i18ngrep ! "disabling cone patterns" err &&
git -C repo reset --hard &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
folder1
@@ -177,7 +182,7 @@ test_expect_success 'sparse-checkout disable' '
test_path_is_file repo/.git/info/sparse-checkout &&
git -C repo config --list >config &&
test_must_fail git config core.sparseCheckout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
deep
@@ -191,24 +196,24 @@ test_expect_success 'cone mode: init and set' '
git -C repo sparse-checkout init --cone &&
git -C repo config --list >config &&
test_i18ngrep "core.sparsecheckoutcone=true" config &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
echo a >expect &&
test_cmp expect dir &&
git -C repo sparse-checkout set deep/deeper1/deepest/ 2>err &&
test_must_be_empty err &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
deep
EOF
test_cmp expect dir &&
- ls repo/deep >dir &&
+ ls_no_git repo/deep >dir &&
cat >expect <<-EOF &&
a
deeper1
EOF
test_cmp expect dir &&
- ls repo/deep/deeper1 >dir &&
+ ls_no_git repo/deep/deeper1 >dir &&
cat >expect <<-EOF &&
a
deepest
@@ -234,7 +239,7 @@ test_expect_success 'cone mode: init and set' '
folder1
folder2
EOF
- ls repo >dir &&
+ ls_no_git repo >dir &&
test_cmp expect dir
'
@@ -256,7 +261,7 @@ test_expect_success 'revert to old sparse-checkout on bad update' '
test_must_fail git -C repo sparse-checkout set deep/deeper1 2>err &&
test_i18ngrep "cannot set sparse-checkout patterns" err &&
test_cmp repo/.git/info/sparse-checkout expect &&
- ls repo/deep >dir &&
+ ls_no_git repo/deep >dir &&
cat >expect <<-EOF &&
a
deeper1
@@ -313,7 +318,7 @@ test_expect_success 'cone mode: set with core.ignoreCase=true' '
/folder1/
EOF
test_cmp expect repo/.git/info/sparse-checkout &&
- ls repo >dir &&
+ ls_no_git repo >dir &&
cat >expect <<-EOF &&
a
folder1
--
2.24.0
next reply other threads:[~2019-12-19 1:58 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-19 1:58 Ed Maste [this message]
2019-12-19 2:07 ` [PATCH] sparse-checkout: improve OS ls compatibility Derrick Stolee
2019-12-19 2:18 ` Ed Maste
2019-12-19 2:22 ` Derrick Stolee
2019-12-19 2:45 ` Eric Wong
2019-12-19 13:56 ` Derrick Stolee
2019-12-19 16:15 ` Ed Maste
2019-12-19 16:34 ` Derrick Stolee
2019-12-19 18:11 ` Junio C Hamano
2019-12-19 20:56 ` Ed Maste
2019-12-19 22:01 ` Junio C Hamano
2019-12-19 21:45 ` [PATCH v2] " Ed Maste
2019-12-19 22:27 ` Denton Liu
2019-12-20 15:38 ` [PATCH v3] " Ed Maste
2019-12-20 16:05 ` Derrick Stolee
2019-12-20 17:55 ` Junio C Hamano
2019-12-20 17:55 ` Eric Sunshine
2019-12-20 18:15 ` Ed Maste
2019-12-20 18:21 ` Junio C Hamano
2019-12-20 18:34 ` Eric Sunshine
2019-12-20 18:34 ` Ed Maste
2019-12-20 19:23 ` Junio C Hamano
2019-12-20 19:33 ` Eric Sunshine
2019-12-20 19:41 ` [PATCH v4] " Ed Maste
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191219015833.49314-1-emaste@FreeBSD.org \
--to=emaste@freebsd.org \
--cc=git@vger.kernel.org \
--cc=gitgitgadget@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).