From: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com> To: "SZEDER Gábor" <szeder.dev@gmail.com> Cc: "Derrick Stolee" <stolee@gmail.com>, "Git List" <git@vger.kernel.org>, "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com> Subject: Re: We should add a "git gc --auto" after "git clone" due to commit graph Date: Wed, 03 Oct 2018 16:01:40 +0200 [thread overview] Message-ID: <87r2h7gmd7.fsf@evledraar.gmail.com> (raw) In-Reply-To: <20181003133650.GN23446@localhost> On Wed, Oct 03 2018, SZEDER Gábor wrote: > On Wed, Oct 03, 2018 at 03:23:57PM +0200, Ævar Arnfjörð Bjarmason wrote: >> Don't have time to patch this now, but thought I'd send a note / RFC >> about this. >> >> Now that we have the commit graph it's nice to be able to set >> e.g. core.commitGraph=true & gc.writeCommitGraph=true in ~/.gitconfig or >> /etc/gitconfig to apply them to all repos. >> >> But when I clone e.g. linux.git stuff like 'tag --contains' will be slow >> until whenever my first "gc" kicks in, which may be quite some time if >> I'm just using it passively. >> >> So we should make "git gc --auto" be run on clone, > > There is no garbage after 'git clone'... "git gc" is really "git gc-or-create-indexes" these days. >> and change the >> need_to_gc() / cmd_gc() behavior so that we detect that the >> gc.writeCommitGraph=true setting is on, but we have no commit graph, and >> then just generate that without doing a full repack. > > Or just teach 'git clone' to run 'git commit-graph write ...' Then when adding something like the commit graph we'd need to patch both git-clone and git-gc, it's much more straightforward to make need_to_gc() more granular. >> As an aside such more granular "gc" would be nice for e.g. pack-refs >> too. It's possible for us to just have one pack, but to have 100k loose >> refs. >> >> It might also be good to have some gc.autoDetachOnClone option and have >> it false by default, so we don't have a race condition where "clone >> linux && git -C linux tag --contains" is slow because the graph hasn't >> been generated yet, and generating the graph initially doesn't take that >> long compared to the time to clone a large repo (and on a small one it >> won't matter either way). >> >> I was going to say "also for midx", but of course after clone we have >> just one pack, so I can't imagine us needing this. But I can see us >> having other such optional side-indexes in the future generated by gc, >> and they'd also benefit from this. >> >> #leftoverbits
next prev parent reply other threads:[~2018-10-03 14:01 UTC|newest] Thread overview: 78+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-03 13:23 Ævar Arnfjörð Bjarmason 2018-10-03 13:36 ` SZEDER Gábor 2018-10-03 13:42 ` Derrick Stolee 2018-10-03 14:18 ` Ævar Arnfjörð Bjarmason 2018-10-03 14:01 ` Ævar Arnfjörð Bjarmason [this message] 2018-10-03 14:17 ` SZEDER Gábor 2018-10-03 14:22 ` Ævar Arnfjörð Bjarmason 2018-10-03 14:53 ` SZEDER Gábor 2018-10-03 15:19 ` Ævar Arnfjörð Bjarmason 2018-10-03 16:59 ` SZEDER Gábor 2018-10-05 6:09 ` Junio C Hamano 2018-10-10 22:07 ` SZEDER Gábor 2018-10-10 23:01 ` Ævar Arnfjörð Bjarmason 2018-10-03 19:08 ` Stefan Beller 2018-10-03 19:21 ` Jeff King 2018-10-03 20:35 ` Ævar Arnfjörð Bjarmason 2018-10-03 17:47 ` Stefan Beller 2018-10-03 18:47 ` Ævar Arnfjörð Bjarmason 2018-10-03 18:51 ` Jeff King 2018-10-03 18:59 ` Derrick Stolee 2018-10-03 19:18 ` Jeff King 2018-10-08 16:41 ` SZEDER Gábor 2018-10-08 16:57 ` Derrick Stolee 2018-10-08 18:10 ` SZEDER Gábor 2018-10-08 18:29 ` Derrick Stolee 2018-10-09 3:08 ` Jeff King 2018-10-09 13:48 ` Bloom Filters (was Re: We should add a "git gc --auto" after "git clone" due to commit graph) Derrick Stolee 2018-10-09 18:45 ` Ævar Arnfjörð Bjarmason 2018-10-09 18:46 ` Jeff King 2018-10-09 19:03 ` Derrick Stolee 2018-10-09 21:14 ` Jeff King 2018-10-09 23:12 ` Bloom Filters Jeff King 2018-10-09 23:13 ` [PoC -- do not apply 1/3] initial tree-bitmap proof of concept Jeff King 2018-10-09 23:14 ` [PoC -- do not apply 2/3] test-tree-bitmap: add "dump" mode Jeff King 2018-10-10 0:48 ` Junio C Hamano 2018-10-11 3:13 ` Jeff King 2018-10-09 23:14 ` [PoC -- do not apply 3/3] test-tree-bitmap: replace ewah with custom rle encoding Jeff King 2018-10-10 0:58 ` Junio C Hamano 2018-10-11 3:20 ` Jeff King 2018-10-11 12:33 ` Bloom Filters Derrick Stolee 2018-10-11 13:43 ` Jeff King 2018-10-09 21:30 ` We should add a "git gc --auto" after "git clone" due to commit graph SZEDER Gábor 2018-10-09 19:34 ` [PATCH 0/4] Bloom filter experiment SZEDER Gábor 2018-10-09 19:34 ` [PATCH 1/4] Add a (very) barebones Bloom filter implementation SZEDER Gábor 2018-10-09 19:34 ` [PATCH 2/4] commit-graph: write a Bloom filter containing changed paths for each commit SZEDER Gábor 2018-10-09 21:06 ` Jeff King 2018-10-09 21:37 ` SZEDER Gábor 2018-10-09 19:34 ` [PATCH 3/4] revision.c: use the Bloom filter to speed up path-limited revision walks SZEDER Gábor 2018-10-09 19:34 ` [PATCH 4/4] revision.c: add GIT_TRACE_BLOOM_FILTER for a bit of statistics SZEDER Gábor 2018-10-09 19:47 ` [PATCH 0/4] Bloom filter experiment Derrick Stolee 2018-10-11 1:21 ` [PATCH 0/2] Per-commit filter proof of concept Jonathan Tan 2018-10-11 1:21 ` [PATCH 1/2] One filter per commit Jonathan Tan 2018-10-11 12:49 ` Derrick Stolee 2018-10-11 19:11 ` [PATCH] Per-commit and per-parent filters for 2 parents Jonathan Tan 2018-10-11 1:21 ` [PATCH 2/2] Only make bloom filter for first parent Jonathan Tan 2018-10-11 7:37 ` [PATCH 0/2] Per-commit filter proof of concept Ævar Arnfjörð Bjarmason 2018-10-15 14:39 ` [PATCH 0/4] Bloom filter experiment Derrick Stolee 2018-10-16 4:45 ` Junio C Hamano 2018-10-16 11:13 ` Derrick Stolee 2018-10-16 12:57 ` Ævar Arnfjörð Bjarmason 2018-10-16 13:03 ` Derrick Stolee 2018-10-18 2:00 ` Junio C Hamano 2018-10-16 23:41 ` Jonathan Tan 2018-10-08 23:02 ` We should add a "git gc --auto" after "git clone" due to commit graph Junio C Hamano 2018-10-03 14:32 ` Duy Nguyen 2018-10-03 16:45 ` Duy Nguyen 2018-10-04 21:42 ` [RFC PATCH] " Ævar Arnfjörð Bjarmason 2018-10-05 12:05 ` Derrick Stolee 2018-10-05 13:05 ` Ævar Arnfjörð Bjarmason 2018-10-05 13:45 ` Derrick Stolee 2018-10-05 14:04 ` Ævar Arnfjörð Bjarmason 2018-10-05 19:21 ` Jeff King 2018-10-05 19:41 ` Derrick Stolee 2018-10-05 19:47 ` Jeff King 2018-10-05 20:00 ` Derrick Stolee 2018-10-05 20:02 ` Jeff King 2018-10-05 20:01 ` Ævar Arnfjörð Bjarmason 2018-10-05 20:09 ` Jeff King
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=87r2h7gmd7.fsf@evledraar.gmail.com \ --to=avarab@gmail.com \ --cc=git@vger.kernel.org \ --cc=pclouds@gmail.com \ --cc=stolee@gmail.com \ --cc=szeder.dev@gmail.com \ --subject='Re: We should add a "git gc --auto" after "git clone" due to commit graph' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).