* [PATCH v4 0/3] vimdiff: new implementation with layout support
@ 2021-12-04 9:03 Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 1/3] " Fernando Ramos
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Fernando Ramos @ 2021-12-04 9:03 UTC (permalink / raw)
To: git; +Cc: avarab, gitster, davvid, sunshine, seth, levraiphilippeblain, rogi
A few weeks ago I presented this RFC [1] where I introduced a new variant of the
vimdiff merge tool ("vimdiff4") that creates three tabs (instead of just one)
that look like this:
------------------------------------------
| <TAB #1> | TAB #2 | TAB #3 | |
------------------------------------------
| | | |
| LOCAL | BASE | REMOTE |
| | | | <---- Same information
------------------------------------------ presented by the
| | "standard" vimdiff
| MERGED | merge tool
| |
------------------------------------------
------------------------------------------
| TAB #1 | <TAB #2> | TAB #3 | |
------------------------------------------
| | |
| | |
| | |
| BASE | LOCAL | <---- Only differences
| | | between BASE and
| | | LOCAL are shown
| | |
------------------------------------------
------------------------------------------
| TAB #1 | TAB #2 | <TAB #3> | |
------------------------------------------
| | |
| | |
| | |
| BASE | REMOTE | <---- Only differences
| | | between BASE and
| | | REMOTE are shown
| | |
------------------------------------------
The motivation behind this was that, for non-trivial merges, the three way diff
presented in the first tab tends to be very confusing and in these cases
individual diffs between BASE and LOCAL and between BASE and REMOTE are very
useful.
I have been using a "custom" merge tool for months to achieve this same result
by adding these lines to my .gitconfig file:
[mergetool "supermerge"]
cmd = vim -f -d -c \"4wincmd w | wincmd J | tabnew | edit $LOCAL | vertical diffsplit $BASE | tabnew | edit $REMOTE | vertical diffsplit $BASE | 2tabprevious\" \"$LOCAL\" \"$BASE\" \"$REMOTE\" \"$MERGED\"
trustExitCode = true
...and, because I found this "trick" very useful, I thought it would be a good
idea to add it as a git built-in merge tool (called "vimdiff4" because 1, 2 and
3 had already been taken) for everyone to use... and that's exactly what the RFC
I published did.
Now... as you can see in the RFC thread [1], David and Juno suggested that
maybe, instead of creating *yet another vimdiff variant*, we should take this
opportunity to:
* Come up with a more general way of defining arbitrary vim layouts.
* Re-implement "vimdiff1", "vimdiff2" and "vimdiff3" using this new mechanism
(after all, the only difference among them is that they present different
layouts to the user)
* Add documentation to all of this.
And the result of that work is what I'm presenting today :)
Some things I would like to mention:
1. There are three commits in this patch series:
- The first one implements the logic to generate new arbitrary layouts and
also re-defines "vimdiff1", "vimdiff2" and "vimdiff3" on top of it.
- The second one adds documentation. It is probably a good idea to start
reviewing this commit before the first one!
- The last commit *is not meant to be merged now*. It removes "vimdiff1",
"vimdiff2" and "vimdiff3", which is something that should only be done
after one or two releases with a deprecation notice and only if everyone
agrees to do so :)
2. "mergetools/vimdiff" is now a ~800 lines bash script, but most of it is
documentation (which is embedded in the tool itself for easier maintenance)
and unit tests.
I have only tested it with bash, but I've tried not to use any command not
already being used somewhere else, so I expect it to work in the same
places it was working before (however, let me know if there are some shell
compatibility requirements and I'll try to check them).
3. Regarding unit tests, "mergetool/vimdiff" contains instructions on how to
run them (just call the script without arguments after making changes, to
make sure you didn't break anything).
Right now it prints "OK" on all test cases (obviously) [2]
3. The "git {diff,merge}tool --tool-help" command now also prints the
documentation for each tool (instead of just its name, as before).
You can see an example of the output here ([3] and [4])
Finally, let me say that, while I like what this patch series achieves, I would
also *completely* understand if you decide not to merge it due to being a
complex solution to a simple problem that can be solved (as I had been doing up
until today) by just adding three line to one's .gitconfig.
[mergetool "supermerge"]
cmd = vim -f -d -c ...(custom complex sequence of vim commands)...
trustExitCode = true
Let me know what you think.
Thanks.
References:
[1] https://lore.kernel.org/git/20211019212020.25385-1-greenfoo@u92.eu/#r
[2] https://pastebin.com/kuQ5pETG
[3] https://pastebin.com/yvLWxeiM
[4] https://pastebin.com/qNc7qymp
New in v2:
* Remove deprecation of vimdiff{1,2,3} (they will remain for backwards
compatibility, but built on top of the new generic layout mechanism)
* Remove unnecessary "IFS="
* Replace DEBUG --> GIT_MERGETOOL_VIMDIFF_DEBUG
* Stop using "local" (turns out it was not necessary)
* Stop using bash arrays (use arrays of variables instead)
* Stop using bash substring expansion (use a new "substring" function
instead).
* Refactor some of the internal loops to make the code faster. This was needed
because the two previous changes (specially the one where I stop using
"substring expansion") slowed down the script to a point where I had to wait
for a few *seconds* before the "layout" string was resolved (recursion +
bash forks are a recipe for sluggishness). Fortunately we are back to the
low hundreds of milliseconds range.
* Change markers:
- File to save: * --> @
- New tab : ; --> +
- Vert split : | --> ,
- Horz split : - --> /
* Rewrite examples to use as few parenthesis as possible (typically zero)
and better explain operators priority.
* Other fixes to remove problems reported by "shellcheck --shell=sh" (which
checks syntax agains the POSIX shell spec)
* Rename "index_..." vars to make more obvious what they do.
* Use "$" inside arithmetic expressions $((...))
NOTE: "shellcheck" issues a warning stating that "$" is not needed inside
arithmetic expressions.
* Use "test -n" instead of "! test -z"
* Use "=" instead of "==" in "test"
* Use "= 0" instead of "-eq 0"
* Do not use "eval" nor "--" when copying a file to MERGED
* Do not use "-o" with grep
* Use <<-\EOF instead of <<\ENDOFMESSAGE and remove extra indent in "here
docs".
* Also, let me put here some answers to questions made in the replies to
version v1 of this patch set:
> What do backticks do in here?
>
> some_var=(
> `# Name` "Rick Deckard"
> `# Age` "Unknown"
> `# Occupation` "Blade runner"
> )
The backticks execute the code inside, which is a comment (everything after
a "#" is considered a comment by the shell), thus it does nothing.
The `# ...` trick can be used to insert inline comments in bash. Another
example:
$ ls -l `# long format` -h `# human readable` *.txt
In any case, as you can see in this new revision, because I'm no longer
using bash arrays, this trick to comment each test case is not needed
anymore.
> Why is "eval" needed here:
>
> eval "$merge_tool_path" \
> -f "$FINAL_CMD" "$LOCAL" "$BASE" "$REMOTE" "$MERGED"
Variable "$FINAL_CMD" contains a string that looks like this:
$ echo $FINAL_CMD
-c "vim cmd 1 | vim cmd 2 | ..." -c "tabfirst"
We need to call "vim" exactly like that, but if we do this...
$ vim $FINAL_CMD
...then "vim" will be excev'ed with the following arguments:
1. -c
2. "vim
3. cmd
4. 1
...
...instead of the desired scenario:
1. -c
2. cmd 1 | cmd 2 | ...
3. -c
4. tabfirst
Using "eval" fixes this. A shorter example shows how this works:
$ A="1 \"2 3\""
$ ls $A
ls: cannot access '1': No such file or directory
ls: cannot access '"2': No such file or directory
ls: cannot access '3"': No such file or directory
$ eval ls $A
ls: cannot access '1': No such file or directory
ls: cannot access '2 3': No such file or directory
* Finally, I think I have addressed all comments to v1 *except for two
things*:
1. Moving the documentation to "Documentation/" instead of having it
embedded inside the "mergetools/vimdiff" script.
2. Move unit tests to the "test suit"
For (1) I would like more details. Is the idea not to print any
documentation when running "git mergetool --tool-help" and have all the
details included in "git help mergetool" instead?
Right now "git help mergetool" does not mention any tool specific details
and, instead, redirects the user to "git mergetool --tool-help" (that's why
I originally placed the new documentation there).
In any case, all the doc has been placed on its own commit, so once we
decide how to proceed its just a matter of reverting it.
For (2) I still need to investigate how this is done and prepare a "v3" if
needed :)
New in v3:
* Rebase on top of latest master
* Documentation moved to "Documentation/". Running "git mergetool
--tool-help" now works like before (ie. it just lists all available merge
tools) except that a one line reference to a "man" entry is also printed for
those entries providing one (right now, only vimdiff):
$ git mergetool --tool-help
'git mergetool --tool=<tool>' may be set to one of the following:
araxis
meld
vimdiff
Run 'man git-mergetool--vimdiff' for details
vimdiff1
Run 'man git-mergetool--vimdiff' for details
...
* New test file "t/7609-mergetool--lib.sh" created. Right now it only
contains one test which calls "mergetools/vimdiff" with a special
environment set, causing layout unit tests to run.
New in v4:
* Rebase on top of latest master
* Stop using "$" inside arithmetic expressions.
* Remove "!/bin/bash" from the top of the "vimdiff" script.
* Update comment explaining how the "vimdiff" script can be run.
* Fix spaces/tabs.
* Change the way unit tests are run (now the script is directly sourced
instead of calling bash)
* Remove unnecessary "case/esac" structure.
* Fix typo in documentation
Fernando Ramos (3):
vimdiff: new implementation with layout support
vimdiff: add tool documentation
vimdiff: integrate layout tests in the unit tests framework ('t'
folder)
Documentation/git-difftool--vimdiff.txt | 40 ++
Documentation/git-mergetool--vimdiff.txt | 195 ++++++++
git-mergetool--lib.sh | 14 +
mergetools/vimdiff | 560 +++++++++++++++++++++--
t/t7609-mergetool--lib.sh | 15 +
5 files changed, 797 insertions(+), 27 deletions(-)
create mode 100644 Documentation/git-difftool--vimdiff.txt
create mode 100644 Documentation/git-mergetool--vimdiff.txt
create mode 100755 t/t7609-mergetool--lib.sh
base-commit: abe6bb3905392d5eb6b01fa6e54d7e784e0522aa
--
2.34.0
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v4 1/3] vimdiff: new implementation with layout support
2021-12-04 9:03 [PATCH v4 0/3] vimdiff: new implementation with layout support Fernando Ramos
@ 2021-12-04 9:03 ` Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 2/3] vimdiff: add tool documentation Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 3/3] vimdiff: integrate layout tests in the unit tests framework ('t' folder) Fernando Ramos
2 siblings, 0 replies; 8+ messages in thread
From: Fernando Ramos @ 2021-12-04 9:03 UTC (permalink / raw)
To: git; +Cc: avarab, gitster, davvid, sunshine, seth, levraiphilippeblain, rogi
When running 'git mergetool -t vimdiff', a new configuration option
('mergetool.vimdiff.layout') can now be used to select how the user
wants the different windows, tabs and buffers to be displayed.
If the option is not provided, the layout will be the same one that was
being used before this commit (ie. two rows with LOCAL, BASE and COMMIT
in the top one and MERGED in the bottom one).
The 'vimdiff' variants ('vimdiff{1,2,3}') still work but, because they
represented nothing else than different layouts, are now internally
implemented as a subcase of 'vimdiff' with the corresponding
pre-configured 'layout'.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
---
mergetools/vimdiff | 548 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 521 insertions(+), 27 deletions(-)
diff --git a/mergetools/vimdiff b/mergetools/vimdiff
index 96f6209a04..5bf77a5388 100644
--- a/mergetools/vimdiff
+++ b/mergetools/vimdiff
@@ -1,48 +1,440 @@
+# This script can be run in two different contexts:
+#
+# - From git, when the user invokes the "vimdiff" merge tool. In this context
+# this script expects the following environment variables (among others) to
+# be defined (which is something "git" takes care of):
+#
+# - $BASE
+# - $LOCAL
+# - $REMOTE
+# - $MERGED
+#
+# In this mode, all this script does is to run the next command:
+#
+# vim -f -c ... $LOCAL $BASE $REMOTE $MERGED
+#
+# ...where the "..." string depends on the value of the
+# "mergetool.vimdiff.layout" configuration variable and is used to open vim
+# with a certain layout of buffers, windows and tabs.
+#
+# - From the unit tests framework ("t" folder) by sourcing this script and
+# then manually calling "run_unit_tests", which will run a battery of unit
+# tests to make sure nothing breaks.
+# In this context this script does not expect any particular environment
+# variable to be set.
+
+
+################################################################################
+## Internal functions (not meant to be used outside this script)
+################################################################################
+
+debug_print() {
+ # Send message to stderr if global variable DEBUG is set to "true"
+
+ if test -n "$GIT_MERGETOOL_VIMDIFF_DEBUG"
+ then
+ >&2 echo "$@"
+ fi
+}
+
+substring() {
+ # Return a substring of $1 containing $3 characters starting at
+ # zero-based offset $2.
+ #
+ # Examples:
+ #
+ # substring "Hello world" 0 4 --> "Hell"
+ # substring "Hello world" 3 4 --> "lo w"
+ # substring "Hello world" 3 10 --> "lo world"
+
+ STRING=$1
+ START=$2
+ LEN=$3
+
+ echo "$STRING" | cut -c$(( START + 1 ))-$(( START + $LEN))
+}
+
+gen_cmd_aux() {
+ # Auxiliary function used from "gen_cmd()".
+ # Read that other function documentation for more details.
+
+ LAYOUT=$1
+ CMD=$2 # This is a second (hidden) argument used for recursion
+
+ debug_print
+ debug_print "LAYOUT : $LAYOUT"
+ debug_print "CMD : $CMD"
+
+ if test -z "$CMD"
+ then
+ CMD="echo" # vim "nop" operator
+ fi
+
+ start=0
+ end=${#LAYOUT}
+
+ nested=0
+ nested_min=100
+
+
+ # Step 1:
+ #
+ # Increase/decrease "start"/"end" indices respectively to get rid of
+ # outer parenthesis.
+ #
+ # Example:
+ #
+ # - BEFORE: (( LOCAL , BASE ) / MERGED )
+ # - AFTER : ( LOCAL , BASE ) / MERGED
+
+ oldIFS=$IFS
+ IFS=#
+ for c in $(echo "$LAYOUT" | sed 's:.:&#:g')
+ do
+ if test "$c" = " "
+ then
+ continue
+ fi
+
+ if test "$c" = "("
+ then
+ nested=$(( nested + 1 ))
+ continue
+ fi
+
+ if test "$c" = ")"
+ then
+ nested=$(( nested - 1 ))
+ continue
+ fi
+
+ if test "$nested" -lt "$nested_min"
+ then
+ nested_min=$nested
+ fi
+ done
+ IFS=$oldIFS
+
+ debug_print "NESTED MIN: $nested_min"
+
+ while test "$nested_min" -gt "0"
+ do
+ start=$(( start + 1 ))
+ end=$(( end - 1 ))
+
+ start_minus_one=$(( start - 1 ))
+
+ while ! test "$(substring "$LAYOUT" "$start_minus_one" 1)" = "("
+ do
+ start=$(( start + 1 ))
+ start_minus_one=$(( start_minus_one + 1 ))
+ done
+
+ while ! test "$(substring "$LAYOUT" "$end" 1)" = ")"
+ do
+ end=$(( end - 1 ))
+ done
+
+ nested_min=$(( nested_min - 1 ))
+ done
+
+ debug_print "CLEAN : $(substring "$LAYOUT" "$start" "$(( end - start ))")"
+
+
+ # Step 2:
+ #
+ # Search for all valid separators ("+", "/" or ",") which are *not*
+ # inside parenthesis. Save the index at which each of them makes the
+ # first appearance.
+
+ index_new_tab=""
+ index_horizontal_split=""
+ index_vertical_split=""
+
+ nested=0
+ i=$(( start - 1 ))
+
+ oldIFS=$IFS
+ IFS=#
+ for c in $(substring "$LAYOUT" "$start" "$(( end - start ))" | sed 's:.:&#:g');
+ do
+ i=$(( i + 1 ))
+
+ if test "$c" = " "
+ then
+ continue
+ fi
+
+ if test "$c" = "("
+ then
+ nested=$(( nested + 1 ))
+ continue
+ fi
+
+ if test "$c" = ")"
+ then
+ nested=$(( nested - 1 ))
+ continue
+ fi
+
+ if test "$nested" = 0
+ then
+ current=$c
+
+ if test "$current" = "+"
+ then
+ if test -z "$index_new_tab"
+ then
+ index_new_tab=$i
+ fi
+
+ elif test "$current" = "/"
+ then
+ if test -z "$index_horizontal_split"
+ then
+ index_horizontal_split=$i
+ fi
+
+ elif test "$current" = ","
+ then
+ if test -z "$index_vertical_split"
+ then
+ index_vertical_split=$i
+ fi
+ fi
+ fi
+ done
+ IFS=$oldIFS
+
+
+ # Step 3:
+ #
+ # Process the separator with the highest order of precedence
+ # (";" has the highest precedence and "|" the lowest one).
+ #
+ # By "process" I mean recursively call this function twice: the first
+ # one with the substring at the left of the separator and the second one
+ # with the one at its right.
+
+ terminate="false"
+
+ if ! test -z "$index_new_tab"
+ then
+ before="-tabnew"
+ after="tabnext"
+ index=$index_new_tab
+ terminate="true"
+
+ elif ! test -z "$index_horizontal_split"
+ then
+ before="split"
+ after="wincmd j"
+ index=$index_horizontal_split
+ terminate="true"
+
+ elif ! test -z "$index_vertical_split"
+ then
+ before="vertical split"
+ after="wincmd l"
+ index=$index_vertical_split
+ terminate="true"
+ fi
+
+ if test "$terminate" = "true"
+ then
+ CMD="$CMD | $before"
+ CMD=$(gen_cmd_aux "$(substring "$LAYOUT" "$start" "$(( index - start ))")" "$CMD")
+ CMD="$CMD | $after"
+ CMD=$(gen_cmd_aux "$(substring "$LAYOUT" "$(( index + 1 ))" "$(( ${#LAYOUT} - index ))")" "$CMD")
+ echo "$CMD"
+ return
+ fi
+
+
+ # Step 4:
+ #
+ # If we reach this point, it means there are no separators and we just
+ # need to print the command to display the specified buffer
+
+ target=$(substring "$LAYOUT" "$start" "$(( end - start ))" | sed 's:[ @();|-]::g')
+
+ if test "$target" = "LOCAL"
+ then
+ CMD="$CMD | 1b"
+
+ elif test "$target" = "BASE"
+ then
+ CMD="$CMD | 2b"
+
+ elif test "$target" = "REMOTE"
+ then
+ CMD="$CMD | 3b"
+
+ elif test "$target" = "MERGED"
+ then
+ CMD="$CMD | 4b"
+
+ else
+ CMD="$CMD | ERROR: >$target<"
+ fi
+
+ echo "$CMD"
+ return
+}
+
+
+gen_cmd() {
+ # This function returns (in global variable FINAL_CMD) the string that
+ # you can use when invoking "vim" (as shown next) to obtain a given
+ # layout:
+ #
+ # $ vim -f $FINAL_CMD "$LOCAL" "$BASE" "$REMOTE" "$MERGED"
+ #
+ # It takes one single argument: a string containing the desired layout
+ # definition.
+ #
+ # The syntax of the "layout definitions" is explained in ... (TODO)...
+ # but you can already intuitively understand how it works by knowing
+ # that...
+ #
+ # * ";" means "a new vim tab"
+ # * "-" means "a new vim horizontal split"
+ # * "|" means "a new vim vertical split"
+ #
+ # It also returns (in global variable FINAL_TARGET) the name ("LOCAL",
+ # "BASE", "REMOTE" or "MERGED") of the file that is marked with an "@",
+ # or "MERGED" if none of them is.
+ #
+ # Example:
+ #
+ # gen_cmd "@LOCAL , REMOTE"
+ # |
+ # `-> FINAL_CMD == "-c \"echo | vertical split | 1b | wincmd l | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ # FINAL_TARGET == "LOCAL"
+
+ LAYOUT=$1
+
+
+ # Search for a "@" in one of the files identifiers ("LOCAL", "BASE",
+ # "REMOTE", "MERGED"). If not found, use "MERGE" as the default file
+ # where changes will be saved.
+
+ if echo "$LAYOUT" | grep @LOCAL >/dev/null
+ then
+ FINAL_TARGET="LOCAL"
+ elif echo "$LAYOUT" | grep @BASE >/dev/null
+ then
+ FINAL_TARGET="BASE"
+ else
+ FINAL_TARGET="MERGED"
+ fi
+
+
+ # Obtain the first part of vim "-c" option to obtain the desired layout
+
+ CMD=$(gen_cmd_aux "$LAYOUT")
+
+
+ # Adjust the just obtained script depending on whether more than one
+ # windows are visible or not
+
+ if echo "$LAYOUT" | grep ",\|/" >/dev/null
+ then
+ CMD="$CMD | tabdo windo diffthis"
+ else
+ CMD="$CMD | bufdo diffthis"
+ fi
+
+
+ # Add an extra "-c" option to move to the first tab (notice that we
+ # can't simply append the command to the previous "-c" string as
+ # explained here: https://github.com/vim/vim/issues/9076
+
+ FINAL_CMD="-c \"$CMD\" -c \"tabfirst\""
+}
+
+
+################################################################################
+## API functions (called from "git-mergetool--lib.sh")
+################################################################################
+
diff_cmd () {
"$merge_tool_path" -R -f -d \
-c 'wincmd l' -c 'cd $GIT_PREFIX' "$LOCAL" "$REMOTE"
}
+
merge_cmd () {
+ layout=$(git config mergetool.$merge_tool.layout)
+
case "$1" in
*vimdiff)
- if $base_present
+ if test -z "$layout"
then
- "$merge_tool_path" -f -d -c '4wincmd w | wincmd J' \
- "$LOCAL" "$BASE" "$REMOTE" "$MERGED"
- else
- "$merge_tool_path" -f -d -c 'wincmd l' \
- "$LOCAL" "$MERGED" "$REMOTE"
+ # Default layout when none is specified
+ layout="(LOCAL,BASE,REMOTE)/MERGED"
fi
;;
*vimdiff1)
- "$merge_tool_path" -f -d \
- -c 'echon "Resolve conflicts leftward then save. Use :cq to abort."' \
- "$LOCAL" "$REMOTE"
- ret="$?"
- if test "$ret" -eq 0
- then
- cp -- "$LOCAL" "$MERGED"
- fi
- return "$ret"
+ layout="@LOCAL,MERGED"
;;
*vimdiff2)
- "$merge_tool_path" -f -d -c 'wincmd l' \
- "$LOCAL" "$MERGED" "$REMOTE"
+ layout="LOCAL,MERGED,REMOTE"
;;
*vimdiff3)
- if $base_present
- then
- "$merge_tool_path" -f -d -c 'hid | hid | hid' \
- "$LOCAL" "$REMOTE" "$BASE" "$MERGED"
- else
- "$merge_tool_path" -f -d -c 'hid | hid' \
- "$LOCAL" "$REMOTE" "$MERGED"
- fi
+ layout="MERGED"
;;
esac
+
+ gen_cmd "$layout"
+
+ debug_print ""
+ debug_print "FINAL CMD : $FINAL_CMD"
+ debug_print "FINAL TAR : $FINAL_TARGET"
+
+ if $base_present
+ then
+ eval "$merge_tool_path" \
+ -f "$FINAL_CMD" "$LOCAL" "$BASE" "$REMOTE" "$MERGED"
+ else
+ # If there is no BASE (example: a merge conflict in a new file
+ # with the same name created in both braches which didn't exist
+ # before), close all BASE windows using vim's "quit" command
+
+ FINAL_CMD=$(echo "$FINAL_CMD" | \
+ sed -e 's:2b:quit:g' -e 's:3b:2b:g' -e 's:4b:3b:g')
+
+ eval "$merge_tool_path" \
+ -f "$FINAL_CMD" "$LOCAL" "$REMOTE" "$MERGED"
+ fi
+
+ ret="$?"
+
+ if test "$ret" -eq 0
+ then
+ case "$FINAL_TARGET" in
+ LOCAL)
+ source_path="$LOCAL"
+ ;;
+ REMOTE)
+ source_path="$REMOTE"
+ ;;
+ MERGED|*)
+ # Do nothing
+ source_path=
+ ;;
+ esac
+
+ if test -n "$source_path"
+ then
+ cp "$source_path" "$MERGED"
+ fi
+ fi
+
+ return "$ret"
}
+
translate_merge_tool_path() {
case "$1" in
nvimdiff*)
@@ -57,14 +449,116 @@ translate_merge_tool_path() {
esac
}
+
exit_code_trustable () {
true
}
+
list_tool_variants () {
- for prefix in '' g n; do
- for suffix in '' 1 2 3; do
+ for prefix in '' g n
+ do
+ for suffix in '' 1 2 3
+ do
echo "${prefix}vimdiff${suffix}"
done
done
}
+
+
+################################################################################
+## Unit tests (called from scripts inside the "t" folder)
+################################################################################
+
+run_unit_tests() {
+ # Function to make sure that we don't break anything when modifying this
+ # script.
+ #
+ # This function is automatically executed when you execute this directly
+ # from the shell
+
+ NUMBER_OF_TEST_CASES=16
+
+ TEST_CASE_01="LOCAL,MERGED,REMOTE"
+ TEST_CASE_02="LOCAL/MERGED/REMOTE"
+ TEST_CASE_03="(LOCAL/REMOTE),MERGED"
+ TEST_CASE_04="MERGED,(LOCAL/REMOTE)"
+ TEST_CASE_05="(LOCAL,REMOTE)/MERGED"
+ TEST_CASE_06="MERGED/(LOCAL,REMOTE)"
+ TEST_CASE_07="(LOCAL,BASE,REMOTE)/MERGED"
+ TEST_CASE_08="(LOCAL/BASE/REMOTE),MERGED"
+ TEST_CASE_09="@LOCAL,REMOTE"
+ TEST_CASE_10="MERGED"
+ TEST_CASE_11="(LOCAL,BASE,REMOTE)/MERGED+BASE,LOCAL+BASE,REMOTE+(LOCAL/BASE/REMOTE),MERGED"
+ TEST_CASE_12="((LOCAL,REMOTE)/BASE),MERGED"
+ TEST_CASE_13="((LOCAL,REMOTE)/BASE),((LOCAL/REMOTE),MERGED)"
+ TEST_CASE_14="BASE,REMOTE+BASE,LOCAL"
+ TEST_CASE_15=" (( (LOCAL , BASE , REMOTE) / MERGED)) +(BASE) , LOCAL+ BASE , REMOTE+ (((LOCAL / BASE / REMOTE)) , MERGED ) "
+ TEST_CASE_16="LOCAL,BASE,REMOTE / MERGED + BASE,LOCAL + BASE,REMOTE + (LOCAL / BASE / REMOTE),MERGED"
+
+ EXPECTED_CMD_01="-c \"echo | vertical split | 1b | wincmd l | vertical split | 4b | wincmd l | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_02="-c \"echo | split | 1b | wincmd j | split | 4b | wincmd j | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_03="-c \"echo | vertical split | split | 1b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_04="-c \"echo | vertical split | 4b | wincmd l | split | 1b | wincmd j | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_05="-c \"echo | split | vertical split | 1b | wincmd l | 3b | wincmd j | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_06="-c \"echo | split | 4b | wincmd j | vertical split | 1b | wincmd l | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_07="-c \"echo | split | vertical split | 1b | wincmd l | vertical split | 2b | wincmd l | 3b | wincmd j | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_08="-c \"echo | vertical split | split | 1b | wincmd j | split | 2b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_09="-c \"echo | vertical split | 1b | wincmd l | 3b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_10="-c \"echo | 4b | bufdo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_11="-c \"echo | -tabnew | split | vertical split | 1b | wincmd l | vertical split | 2b | wincmd l | 3b | wincmd j | 4b | tabnext | -tabnew | vertical split | 2b | wincmd l | 1b | tabnext | -tabnew | vertical split | 2b | wincmd l | 3b | tabnext | vertical split | split | 1b | wincmd j | split | 2b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_12="-c \"echo | vertical split | split | vertical split | 1b | wincmd l | 3b | wincmd j | 2b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_13="-c \"echo | vertical split | split | vertical split | 1b | wincmd l | 3b | wincmd j | 2b | wincmd l | vertical split | split | 1b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_14="-c \"echo | -tabnew | vertical split | 2b | wincmd l | 3b | tabnext | vertical split | 2b | wincmd l | 1b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_15="-c \"echo | -tabnew | split | vertical split | 1b | wincmd l | vertical split | 2b | wincmd l | 3b | wincmd j | 4b | tabnext | -tabnew | vertical split | 2b | wincmd l | 1b | tabnext | -tabnew | vertical split | 2b | wincmd l | 3b | tabnext | vertical split | split | 1b | wincmd j | split | 2b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+ EXPECTED_CMD_16="-c \"echo | -tabnew | split | vertical split | 1b | wincmd l | vertical split | 2b | wincmd l | 3b | wincmd j | 4b | tabnext | -tabnew | vertical split | 2b | wincmd l | 1b | tabnext | -tabnew | vertical split | 2b | wincmd l | 3b | tabnext | vertical split | split | 1b | wincmd j | split | 2b | wincmd j | 3b | wincmd l | 4b | tabdo windo diffthis\" -c \"tabfirst\""
+
+ EXPECTED_TARGET_01="MERGED"
+ EXPECTED_TARGET_02="MERGED"
+ EXPECTED_TARGET_03="MERGED"
+ EXPECTED_TARGET_04="MERGED"
+ EXPECTED_TARGET_05="MERGED"
+ EXPECTED_TARGET_06="MERGED"
+ EXPECTED_TARGET_07="MERGED"
+ EXPECTED_TARGET_08="MERGED"
+ EXPECTED_TARGET_09="LOCAL"
+ EXPECTED_TARGET_10="MERGED"
+ EXPECTED_TARGET_11="MERGED"
+ EXPECTED_TARGET_12="MERGED"
+ EXPECTED_TARGET_13="MERGED"
+ EXPECTED_TARGET_14="MERGED"
+ EXPECTED_TARGET_15="MERGED"
+ EXPECTED_TARGET_16="MERGED"
+
+ at_least_one_ko="false"
+
+ for i in $(seq -w 1 99)
+ do
+ if test "$i" -gt $NUMBER_OF_TEST_CASES
+ then
+ break
+ fi
+
+ gen_cmd "$(eval echo \${TEST_CASE_"$i"})"
+
+ if test "$FINAL_CMD" = "$(eval echo \${EXPECTED_CMD_"$i"})" \
+ && test "$FINAL_TARGET" = "$(eval echo \${EXPECTED_TARGET_"$i"})"
+ then
+ printf "Test Case #%02d: OK\n" "$(echo "$i" | sed 's/^0*//')"
+ else
+ printf "Test Case #%02d: KO !!!!\n" "$(echo "$i" | sed 's/^0*//')"
+ echo " FINAL_CMD : $FINAL_CMD"
+ echo " FINAL_CMD (expected) : $(eval echo \${EXPECTED_CMD_"$i"})"
+ echo " FINAL_TARGET : $FINAL_TARGET"
+ echo " FINAL_TARGET (expected): $(eval echo \${EXPECTED_TARGET_"$i"})"
+ at_least_one_ko="true"
+ fi
+ done
+
+ if test "$at_least_one_ko" = "true"
+ then
+ return 255
+ else
+ return 0
+ fi
+}
--
2.34.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 2/3] vimdiff: add tool documentation
2021-12-04 9:03 [PATCH v4 0/3] vimdiff: new implementation with layout support Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 1/3] " Fernando Ramos
@ 2021-12-04 9:03 ` Fernando Ramos
2021-12-10 2:58 ` David Aguilar
2021-12-04 9:03 ` [PATCH v4 3/3] vimdiff: integrate layout tests in the unit tests framework ('t' folder) Fernando Ramos
2 siblings, 1 reply; 8+ messages in thread
From: Fernando Ramos @ 2021-12-04 9:03 UTC (permalink / raw)
To: git; +Cc: avarab, gitster, davvid, sunshine, seth, levraiphilippeblain, rogi
Running 'git {merge,diff}tool --tool-help' now also prints usage
information about the vimdiff tool (and its variantes) instead of just
its name.
Two new functions ('diff_cmd_help()' and 'merge_cmd_help()') have been
added to the set of functions that each merge tool (ie. scripts found
inside "mergetools/") can overwrite to provided tool specific
information.
Right now, only 'mergetools/vimdiff' implements these functions, but
other tools are encouraged to do so in the future, specially if they
take configuration options not explained anywhere else (as it is the
case with the 'vimdiff' tool and the new 'layout' option)
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
---
Documentation/git-difftool--vimdiff.txt | 40 +++++
Documentation/git-mergetool--vimdiff.txt | 195 +++++++++++++++++++++++
git-mergetool--lib.sh | 14 ++
mergetools/vimdiff | 12 ++
4 files changed, 261 insertions(+)
create mode 100644 Documentation/git-difftool--vimdiff.txt
create mode 100644 Documentation/git-mergetool--vimdiff.txt
diff --git a/Documentation/git-difftool--vimdiff.txt b/Documentation/git-difftool--vimdiff.txt
new file mode 100644
index 0000000000..5788f8e149
--- /dev/null
+++ b/Documentation/git-difftool--vimdiff.txt
@@ -0,0 +1,40 @@
+git-mergetool{litdd}vimdiff(1)
+==============================
+
+NAME
+----
+git-difftool--vimdiff - Helper script to run vim as a diff tool
+
+SYNOPSIS
+--------
+[verse]
+'git difftool' --tool=vimdiff ... (rest of 'git difftool' options)
+
+DESCRIPTION
+-----------
+When specifying '--tool=vimdiff' in 'git difftool', git will open vim with a
+with two vertical windows: LOCAL changes will be placed in the left window and
+REMOTE changes in the right one.
+
+ ------------------------------------------
+ | | |
+ | | |
+ | | |
+ | LOCAL | REMOTE |
+ | | |
+ | | |
+ | | |
+ ------------------------------------------
+
+VARIANTS
+--------
+Instead of '--tool=vimdiff', you can also use these other variants:
+
+ * '--tool=gvimdiff', to open gvim instead of vim.
+
+ * '--tool=nvimdiff', to open nvim ('neovim') instead of vim.
+
+GIT
+---
+Part of the linkgit:git[1] suite
+
diff --git a/Documentation/git-mergetool--vimdiff.txt b/Documentation/git-mergetool--vimdiff.txt
new file mode 100644
index 0000000000..fb69443d3d
--- /dev/null
+++ b/Documentation/git-mergetool--vimdiff.txt
@@ -0,0 +1,195 @@
+git-difftool{litdd}vimdiff(1)
+=============================
+
+NAME
+----
+git-mergetool--vimdiff - Helper script to run vim as a merge tool
+
+SYNOPSIS
+--------
+[verse]
+'git mergetool' --tool=vimdiff ... (rest of 'git mergetool' options)
+
+DESCRIPTION
+-----------
+When specifying '--tool=vimdiff' in 'git mergetool' git will open vim with a 4
+windows layout distributed in the following way:
+
+ ------------------------------------------
+ | | | |
+ | LOCAL | BASE | REMOTE |
+ | | | |
+ ------------------------------------------
+ | |
+ | MERGED |
+ | |
+ ------------------------------------------
+
+"LOCAL", "BASE" and "REMOTE" are read-only buffers showing the contents of the
+conflicting file in a specific git commit ("commit you are merging into",
+"common ancestor commit" and "commit you are merging from" respectively)
+
+"MERGED" is a writable buffer where you have to resolve the conflicts (using the
+other read-only buffers as a reference). Once you are done, save and exit "vim"
+as usual (":wq") or, if you want to abort, exit using ":cq".
+
+LAYOUT CONFIGURATION
+--------------------
+You can change the windows layout used by vim by setting configuration variable
+"mergetool.vimdiff.layout" which accepts a string where the following separators
+have special meaning:
+
+ - "+" is used to "open a new tab"
+ - "," is used to "open a new vertical split"
+ - "/" is used to "open a new horizontal split"
+ - "@" is used to indicate which is the file containing the final version after
+ solving the conflicts. In not present, "MERGED" will be used by default.
+
+The precedence of the operators is this one (you can use parenthesis to change
+it):
+
+ @ > + > / > ,
+
+Let's see some examples to understand how it works:
+
+ * layout = "(LOCAL,BASE,REMOTE)/MERGED"
+
+ This is exactly the same as the default layout we have already seen.
+
+ Note that "/" has precedence over "," and thus the parenthesis are not
+ needed in this case. The next layout definition is equivalent:
+
+ layout = "LOCAL,BASE,REMOTE / MERGED"
+
+ * layout = "LOCAL,MERGED,REMOTE"
+
+ If, for some reason, we are not interested in the "BASE" buffer.
+
+ ------------------------------------------
+ | | | |
+ | | | |
+ | LOCAL | MERGED | REMOTE |
+ | | | |
+ | | | |
+ ------------------------------------------
+
+ * layout = "MERGED"
+
+ Only the "MERGED" buffer will be shown. Note, however, that all the other
+ ones are still loaded in vim, and you can access them with the "buffers"
+ command.
+
+ ------------------------------------------
+ | |
+ | |
+ | MERGED |
+ | |
+ | |
+ ------------------------------------------
+
+ * layout = "@LOCAL,REMOTE"
+
+ When "MERGED" is not present in the layout, you must "mark" one of the
+ buffers with an asterisk. That will become the buffer you need to edit and
+ save after resolving the conflicts.
+
+ ------------------------------------------
+ | | |
+ | | |
+ | | |
+ | LOCAL | REMOTE |
+ | | |
+ | | |
+ | | |
+ ------------------------------------------
+
+ * layout = "LOCAL,BASE,REMOTE / MERGED + BASE,LOCAL + BASE,REMOTE"
+
+ Three tabs will open: the first one is a copy of the default layout, while
+ the other two only show the differences between "BASE" and "LOCAL" and
+ "BASE" and "REMOTE" respectively.
+
+ ------------------------------------------
+ | <TAB #1> | TAB #2 | TAB #3 | |
+ ------------------------------------------
+ | | | |
+ | LOCAL | BASE | REMOTE |
+ | | | |
+ ------------------------------------------
+ | |
+ | MERGED |
+ | |
+ ------------------------------------------
+
+ ------------------------------------------
+ | TAB #1 | <TAB #2> | TAB #3 | |
+ ------------------------------------------
+ | | |
+ | | |
+ | | |
+ | BASE | LOCAL |
+ | | |
+ | | |
+ | | |
+ ------------------------------------------
+
+ ------------------------------------------
+ | TAB #1 | TAB #2 | <TAB #3> | |
+ ------------------------------------------
+ | | |
+ | | |
+ | | |
+ | BASE | REMOTE |
+ | | |
+ | | |
+ | | |
+ ------------------------------------------
+
+ * layout = "LOCAL,BASE,REMOTE / MERGED + BASE,LOCAL + BASE,REMOTE + (LOCAL/BASE/REMOTE),MERGED"
+
+ Same as the previous example, but adds a fourth tab with the same
+ information as the first tab, with a different layout.
+
+ ---------------------------------------------
+ | TAB #1 | TAB #2 | TAB #3 | <TAB #4> |
+ ---------------------------------------------
+ | LOCAL | |
+ |---------------------| |
+ | BASE | MERGED |
+ |---------------------| |
+ | REMOTE | |
+ ---------------------------------------------
+
+ Note how in the third tab definition we need to use parenthesis to make ","
+ have precedence over "/".
+
+VARIANTS
+--------
+Instead of '--tool=vimdiff', you can also use these other variants:
+
+ * '--tool=gvimdiff', to open gvim instead of vim.
+
+ * '--tool=nvimdiff', to open nvim ('neovim') instead of vim.
+
+When using these variants, in order to specify a custom layout you will have to
+set configuration variables 'mergetool.gvimdiff.layout' and
+'mergetool.nvimdiff.layout' instead of 'mergetool.vimdiff.layout'
+
+In addition, for backwards compatibility with previous git versions, you can
+also append '1', '2' or '3' to either 'vimdiff' or any of the variants (ex:
+'vimdiff3', 'nvimdiff1', etc...) to use a predefined layout.
+In other words, using '--tool=[g,n,]vimdiffx' is the same as using
+'--tool=[g,n,]vimdiff' and setting configuration variable
+'mergetool.[g,n,]vimdiff.layout' to...
+
+ * x=1 --> "@LOCAL, REMOTE"
+ * x=2 --> "LOCAL, MERGED, REMOTE"
+ * x=3 --> "MERGED"
+
+Example: using '--tool=gvimdiff2' will open 'gvim' with three columns (LOCAL,
+MERGED and REMOTE).
+
+GIT
+---
+Part of the linkgit:git[1] suite
+
diff --git a/git-mergetool--lib.sh b/git-mergetool--lib.sh
index 542a6a75eb..956c276e1d 100644
--- a/git-mergetool--lib.sh
+++ b/git-mergetool--lib.sh
@@ -64,6 +64,12 @@ $(list_tool_variants)"
fi
shown_any=yes
printf "%s%s\n" "$per_line_prefix" "$toolname"
+
+ (diff_mode && diff_cmd_help "$toolname" || merge_cmd_help "$toolname") |
+ while read -r line
+ do
+ printf "%s\t%s\n" "$per_line_prefix" "$line"
+ done
fi
done
@@ -162,10 +168,18 @@ setup_tool () {
return 1
}
+ diff_cmd_help () {
+ return 0
+ }
+
merge_cmd () {
return 1
}
+ merge_cmd_help () {
+ return 0
+ }
+
hide_resolved_enabled () {
return 0
}
diff --git a/mergetools/vimdiff b/mergetools/vimdiff
index 5bf77a5388..db6cb75728 100644
--- a/mergetools/vimdiff
+++ b/mergetools/vimdiff
@@ -364,6 +364,12 @@ diff_cmd () {
}
+diff_cmd_help() {
+ echo "Run 'man git-difftool--vimdiff' for details"
+ return 0
+}
+
+
merge_cmd () {
layout=$(git config mergetool.$merge_tool.layout)
@@ -435,6 +441,12 @@ merge_cmd () {
}
+merge_cmd_help() {
+ echo "Run 'man git-mergetool--vimdiff' for details"
+ return 0
+}
+
+
translate_merge_tool_path() {
case "$1" in
nvimdiff*)
--
2.34.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH v4 3/3] vimdiff: integrate layout tests in the unit tests framework ('t' folder)
2021-12-04 9:03 [PATCH v4 0/3] vimdiff: new implementation with layout support Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 1/3] " Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 2/3] vimdiff: add tool documentation Fernando Ramos
@ 2021-12-04 9:03 ` Fernando Ramos
2 siblings, 0 replies; 8+ messages in thread
From: Fernando Ramos @ 2021-12-04 9:03 UTC (permalink / raw)
To: git; +Cc: avarab, gitster, davvid, sunshine, seth, levraiphilippeblain, rogi
Create a new test case file for the different available merge tools.
Right now it only tests the 'mergetool.vimdiff.layout' options. Other
merge tools might be interested in adding their own tests here too.
Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
---
t/t7609-mergetool--lib.sh | 15 +++++++++++++++
1 file changed, 15 insertions(+)
create mode 100755 t/t7609-mergetool--lib.sh
diff --git a/t/t7609-mergetool--lib.sh b/t/t7609-mergetool--lib.sh
new file mode 100755
index 0000000000..8cfc22e27c
--- /dev/null
+++ b/t/t7609-mergetool--lib.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+test_description='git mergetool
+
+Testing basic merge tools options'
+
+. ./test-lib.sh
+
+test_expect_success 'mergetool --tool=vimdiff creates the expected layout' '
+ . $GIT_BUILD_DIR/mergetools/vimdiff &&
+ run_unit_tests
+'
+
+test_done
+
--
2.34.0
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/3] vimdiff: add tool documentation
2021-12-04 9:03 ` [PATCH v4 2/3] vimdiff: add tool documentation Fernando Ramos
@ 2021-12-10 2:58 ` David Aguilar
2021-12-10 21:47 ` Junio C Hamano
2021-12-11 10:46 ` Fernando Ramos
0 siblings, 2 replies; 8+ messages in thread
From: David Aguilar @ 2021-12-10 2:58 UTC (permalink / raw)
To: Fernando Ramos
Cc: Git Mailing List, Ævar Arnfjörð Bjarmason,
Junio C Hamano, Eric Sunshine, Seth House, levraiphilippeblain,
rogi
On Sat, Dec 4, 2021 at 1:04 AM Fernando Ramos <greenfoo@u92.eu> wrote:
>
> Running 'git {merge,diff}tool --tool-help' now also prints usage
> information about the vimdiff tool (and its variantes) instead of just
> its name.
>
> Two new functions ('diff_cmd_help()' and 'merge_cmd_help()') have been
> added to the set of functions that each merge tool (ie. scripts found
> inside "mergetools/") can overwrite to provided tool specific
> information.
>
> Right now, only 'mergetools/vimdiff' implements these functions, but
> other tools are encouraged to do so in the future, specially if they
> take configuration options not explained anywhere else (as it is the
> case with the 'vimdiff' tool and the new 'layout' option)
>
> Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
> ---
> Documentation/git-difftool--vimdiff.txt | 40 +++++
> Documentation/git-mergetool--vimdiff.txt | 195 +++++++++++++++++++++++
> git-mergetool--lib.sh | 14 ++
> mergetools/vimdiff | 12 ++
> 4 files changed, 261 insertions(+)
> create mode 100644 Documentation/git-difftool--vimdiff.txt
> create mode 100644 Documentation/git-mergetool--vimdiff.txt
Should these be referenced from elsewhere in the Documentation/
tree in order to make them more discoverable?
Documentation/git-{difftool,mergetool}.txt seem like they should
include or link to these.
> diff --git a/mergetools/vimdiff b/mergetools/vimdiff
> index 5bf77a5388..db6cb75728 100644
> --- a/mergetools/vimdiff
> +++ b/mergetools/vimdiff
> @@ -364,6 +364,12 @@ diff_cmd () {
> }
>
>
> +diff_cmd_help() {
> + echo "Run 'man git-difftool--vimdiff' for details"
> + return 0
> +}
> +
> +
> merge_cmd () {
> layout=$(git config mergetool.$merge_tool.layout)
>
> @@ -435,6 +441,12 @@ merge_cmd () {
> }
>
>
> +merge_cmd_help() {
> + echo "Run 'man git-mergetool--vimdiff' for details"
> + return 0
> +}
> +
> +
> translate_merge_tool_path() {
> case "$1" in
> nvimdiff*)
> --
My understanding is that we prefer "git help" instead of "man" when
providing hints.
That means we should suggest something like this instead:
echo "Run 'git help mergetool--vimdiff' for details"
--
David
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/3] vimdiff: add tool documentation
2021-12-10 2:58 ` David Aguilar
@ 2021-12-10 21:47 ` Junio C Hamano
2021-12-11 10:46 ` Fernando Ramos
1 sibling, 0 replies; 8+ messages in thread
From: Junio C Hamano @ 2021-12-10 21:47 UTC (permalink / raw)
To: David Aguilar
Cc: Fernando Ramos, Git Mailing List,
Ævar Arnfjörð Bjarmason, Eric Sunshine,
Seth House, levraiphilippeblain, rogi
David Aguilar <davvid@gmail.com> writes:
>> +merge_cmd_help() {
>> + echo "Run 'man git-mergetool--vimdiff' for details"
>> + return 0
>> +}
>> +
>> +
>> translate_merge_tool_path() {
>> case "$1" in
>> nvimdiff*)
>> --
>
>
> My understanding is that we prefer "git help" instead of "man" when
> providing hints.
>
> That means we should suggest something like this instead:
>
> echo "Run 'git help mergetool--vimdiff' for details"
Thanks for pointing it out. Yes, not all platforms we support our
documentation pages have the "man" command as the primary means to
get to them.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/3] vimdiff: add tool documentation
2021-12-10 2:58 ` David Aguilar
2021-12-10 21:47 ` Junio C Hamano
@ 2021-12-11 10:46 ` Fernando Ramos
2022-01-04 20:38 ` Fernando Ramos
1 sibling, 1 reply; 8+ messages in thread
From: Fernando Ramos @ 2021-12-11 10:46 UTC (permalink / raw)
To: David Aguilar
Cc: Git Mailing List, Ævar Arnfjörð Bjarmason,
Junio C Hamano, Eric Sunshine, Seth House, levraiphilippeblain,
rogi
On 21/12/09 06:58PM, David Aguilar wrote:
> On Sat, Dec 4, 2021 at 1:04 AM Fernando Ramos <greenfoo@u92.eu> wrote:
> >
> > Running 'git {merge,diff}tool --tool-help' now also prints usage
> > information about the vimdiff tool (and its variantes) instead of just
> > its name.
> >
> > Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
> > ---
> > Documentation/git-difftool--vimdiff.txt | 40 +++++
> > Documentation/git-mergetool--vimdiff.txt | 195 +++++++++++++++++++++++
>
>
> Should these be referenced from elsewhere in the Documentation/
> tree in order to make them more discoverable?
>
> Documentation/git-{difftool,mergetool}.txt seem like they should
> include or link to these.
Those files (Documentation/git-{difftool,mergetool}.txt) contain this piece of
text:
--tool-help
Print a list of diff tools that may be used with --tool.
When you then run with "--tool-help", not only the list of available tools is
listed, but also a short message explaining how to obtain more details is
presented (for those tools that have more information):
vimdiff
Run 'man git-difftool--vimdiff' for details
In other words: there is one level of "indirection" that decouples the
documentation of each tool from the generic documentation contained in
Documentation/git-{difftool,mergetool}.txt.
Thanks to this, when documentation for a new tool is created in the future, as
long as the "diff_cmd_help()/merge_cmd_help()" functions are overwritten,
everything will "just work" without having to edit
Documentation/git-{difftool,mergetool}.txt each time.
I thought this was the best option but I have not problem adding a reference to
it if you prefer that (maybe at the end, in the "SEE ALSO" section?)
Let me know what you think.
> > +merge_cmd_help() {
> > + echo "Run 'man git-mergetool--vimdiff' for details"
> > + return 0
> > +}
> > +
> > +
>
> My understanding is that we prefer "git help" instead of "man" when
> providing hints.
>
> That means we should suggest something like this instead:
>
> echo "Run 'git help mergetool--vimdiff' for details"
I originally typed that, but then I noticed something in my system: all entries
in "Documentation/" seem to be available as "man" pages, but only a subset of
them are also available through "git help". Examples:
* man git-mergetool --> works
* man git-mergetool--lib --> works
* git help mergetool --> works
* git help mergetool--lib --> does not work!
That's why I ended up using "man".
PS: Now that I have revisited the issue, it looks like the command that is
failing is trying to run "man gitmergetool--lib" under the hood (notice there is
a missing "-"). The problem seems to be in "builtin/help.c:cmd_to_page()":
if is_git_command(x)
return xstrfmt("git-%s", x);
else
return xstrfmt("git%s", x);
Because "mergetool--lib" is not a regular git command, it removes the "-". The
same would happen to the new "git help mergetool--vimdiff" if I add it. Is
this the intended behavior?
There are two options:
A) This is actually an error in help.c logic that needs to be fixed and then
I can update the docs to "git help mergetool--vimdiff".
B) This is the intended behavior and I leave "man git-mergetool--vimdiff" in
the docs.
I would say the right option is (A), but need your input regarding how to fix
it.
Thanks.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v4 2/3] vimdiff: add tool documentation
2021-12-11 10:46 ` Fernando Ramos
@ 2022-01-04 20:38 ` Fernando Ramos
0 siblings, 0 replies; 8+ messages in thread
From: Fernando Ramos @ 2022-01-04 20:38 UTC (permalink / raw)
To: David Aguilar
Cc: Git Mailing List, Ævar Arnfjörð Bjarmason,
Junio C Hamano, Eric Sunshine, Seth House, levraiphilippeblain,
rogi
On 21/12/11 11:46AM, Fernando Ramos wrote:
> On 21/12/09 06:58PM, David Aguilar wrote:
> > On Sat, Dec 4, 2021 at 1:04 AM Fernando Ramos <greenfoo@u92.eu> wrote:
> > >
> > > Running 'git {merge,diff}tool --tool-help' now also prints usage
> > > information about the vimdiff tool (and its variantes) instead of just
> > > its name.
> > >
> > > Signed-off-by: Fernando Ramos <greenfoo@u92.eu>
> > > ---
> > > Documentation/git-difftool--vimdiff.txt | 40 +++++
> > > Documentation/git-mergetool--vimdiff.txt | 195 +++++++++++++++++++++++
> >
> >
> > Should these be referenced from elsewhere in the Documentation/
> > tree in order to make them more discoverable?
> >
> > Documentation/git-{difftool,mergetool}.txt seem like they should
> > include or link to these.
>
> Those files (Documentation/git-{difftool,mergetool}.txt) contain this piece of
> text:
>
> --tool-help
> Print a list of diff tools that may be used with --tool.
>
> When you then run with "--tool-help", not only the list of available tools is
> listed, but also a short message explaining how to obtain more details is
> presented (for those tools that have more information):
>
> vimdiff
> Run 'man git-difftool--vimdiff' for details
>
> In other words: there is one level of "indirection" that decouples the
> documentation of each tool from the generic documentation contained in
> Documentation/git-{difftool,mergetool}.txt.
>
> Thanks to this, when documentation for a new tool is created in the future, as
> long as the "diff_cmd_help()/merge_cmd_help()" functions are overwritten,
> everything will "just work" without having to edit
> Documentation/git-{difftool,mergetool}.txt each time.
>
> I thought this was the best option but I have not problem adding a reference to
> it if you prefer that (maybe at the end, in the "SEE ALSO" section?)
>
> Let me know what you think.
>
>
> > > +merge_cmd_help() {
> > > + echo "Run 'man git-mergetool--vimdiff' for details"
> > > + return 0
> > > +}
> > > +
> > > +
> >
> > My understanding is that we prefer "git help" instead of "man" when
> > providing hints.
> >
> > That means we should suggest something like this instead:
> >
> > echo "Run 'git help mergetool--vimdiff' for details"
>
> I originally typed that, but then I noticed something in my system: all entries
> in "Documentation/" seem to be available as "man" pages, but only a subset of
> them are also available through "git help". Examples:
>
> * man git-mergetool --> works
> * man git-mergetool--lib --> works
>
> * git help mergetool --> works
> * git help mergetool--lib --> does not work!
>
> That's why I ended up using "man".
>
> PS: Now that I have revisited the issue, it looks like the command that is
> failing is trying to run "man gitmergetool--lib" under the hood (notice there is
> a missing "-"). The problem seems to be in "builtin/help.c:cmd_to_page()":
>
> if is_git_command(x)
> return xstrfmt("git-%s", x);
> else
> return xstrfmt("git%s", x);
>
> Because "mergetool--lib" is not a regular git command, it removes the "-". The
> same would happen to the new "git help mergetool--vimdiff" if I add it. Is
> this the intended behavior?
>
> There are two options:
>
> A) This is actually an error in help.c logic that needs to be fixed and then
> I can update the docs to "git help mergetool--vimdiff".
>
> B) This is the intended behavior and I leave "man git-mergetool--vimdiff" in
> the docs.
>
> I would say the right option is (A), but need your input regarding how to fix
> it.
>
> Thanks.
>
Any extra thoughts on these considerations?
Thanks!
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2022-01-04 20:38 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-12-04 9:03 [PATCH v4 0/3] vimdiff: new implementation with layout support Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 1/3] " Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 2/3] vimdiff: add tool documentation Fernando Ramos
2021-12-10 2:58 ` David Aguilar
2021-12-10 21:47 ` Junio C Hamano
2021-12-11 10:46 ` Fernando Ramos
2022-01-04 20:38 ` Fernando Ramos
2021-12-04 9:03 ` [PATCH v4 3/3] vimdiff: integrate layout tests in the unit tests framework ('t' folder) Fernando Ramos
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).