[PATCH v6 0/3] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board

[PATCH v6 0/3] arm64: dts: imx93: add i.Core MX93 EDIMM 2.0 board

[Fabio Aiuto]

Hello all,

this patchset adds support for i.Core MX93 EDIMM 2.0 Starter Kit,
a SoM + Evaluation Board combination from Engicam.

The number of patch has diminished to 3, for I dropped the
patch introducing a change in nxp,pca9450 binding which has
been already submitted in regulator tree.

(Dropped also regulator tree maintainers as recipients for
they aren't anymore involved in this patchset)

This patchset introduces just basic functionality for board.

Thanks in advance,

fabio
---
v5 ---> v6:
	- added property in lpuart5 node
	- removed unused sai1 node
v4 ---> v5:
        - done some property reorder, indentation fixes,
          node rename, drop/add new-lines
        - fixed line wrap in 2nd patch commit log
        - added Reviewed-by tag
v3 ---> v4:
        - drop wl_reg_on regulator in favor of
          mmc-pwrseq-simple
v2 ---> v3:
        - fixed dtschema warnings
        - added Acked/Reviewed-by tags
        - removed regulator-always-on on
          bt_reg_on
        - fixed clock rate assignment on
          sgtl5000 node
        - added wdog_b-warm-reset; property in pmic
        - fixed indentation issue
v1 ---> v2:
        - dropped patch updating nxp,pca9450 binding
        - fixed indentation issue
        - fixed missing space issue
        - improved naming of regulator nodes
        - removed unneeded include
        - fixed email recipients

Fabio Aiuto (3):
  dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit
  arm64: dts: imx93: add Engicam i.Core MX93 SoM
  arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

 .../devicetree/bindings/arm/fsl.yaml          |   7 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 324 ++++++++++++++++++
 .../boot/dts/freescale/imx93-icore-mx93.dtsi  | 269 +++++++++++++++
 4 files changed, 601 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi

-- 
2.34.1

[PATCH v6 1/3] dt-bindings: arm: fsl: add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Aiuto]

i.Core MX93 is a NXP i.MX93 based EDIMM SoM by Engicam.

EDIMM 2.0 Starter Kit is an EDIMM 2.0 Form Factor Capacitive
Evaluation Board by Engicam.

i.Core MX93 needs to be mounted on top of EDIMM 2.0 Starter Kit
to get the full i.Core MX93 EDIMM 2.0 Starter Kit board.

Add bindings for this board.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Reviewed-by: Krzysztof Kozlowsky <krzk@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto@engicam.com>
---
v3 ---> v6:
	- no changes
v2 ---> v3:
	- added {Reviewed,Acked}-by tags
v1 ---> v2:
	- no changes

 Documentation/devicetree/bindings/arm/fsl.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 0027201e19f8..b497a01c7418 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1265,6 +1265,13 @@ properties:
               - fsl,imx93-11x11-evk       # i.MX93 11x11 EVK Board
           - const: fsl,imx93
 
+      - description: Engicam i.Core MX93 based Boards
+        items:
+          - enum:
+              - engicam,icore-mx93-edimm2         # i.MX93 Engicam i.Core MX93 EDIMM 2.0 Starter Kit
+          - const: engicam,icore-mx93             # i.MX93 Engicam i.Core MX93 Som
+          - const: fsl,imx93
+
       - description: i.MXRT1050 based Boards
         items:
           - enum:
-- 
2.34.1

[PATCH v6 2/3] arm64: dts: imx93: add Engicam i.Core MX93 SoM

[Fabio Aiuto]

i.Core MX93 is a NXP i.MX93 based EDIMM SoM by Engicam.

Main features:

CPU:   NXP i.MX 93
MEMORY: Up to 2GB LPDDR4
NETWORKING: 2x Gb Ethernet
USB: USB OTG 2.0, USB HOST 2.0
STORAGE: eMMC starting from 4GB
PERIPHERALS: UART, I2C, SPI, CAN, SDIO, GPIO

The i.Core MX93 needs to be mounted on top of
Engicam baseboards to work.

Add devicetree include file.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto@engicam.com>
---
v5 ---> v6:
	- no changes
v4 ---> v5:
	- added Reviewed-by tag
	- fixed line wrapping in commit msg
	- fixed indentation, dropped newlines, reordered property
v3 ---> v4:
	- no changes
v2 ---> v3:
	- added wdog_b-warm-reset property in pmic
v1 ---> v2:
	- remove unneeded include

 .../boot/dts/freescale/imx93-icore-mx93.dtsi  | 269 ++++++++++++++++++
 1 file changed, 269 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi b/arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi
new file mode 100644
index 000000000000..9c97b620ccfc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-icore-mx93.dtsi
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2024 Engicam s.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/ {
+	model = "Engicam i.Core MX93 SoM";
+	compatible = "engicam,icore-mx93", "fsl,imx93";
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy2>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy2: ethernet-phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <7>;
+		};
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-1 = <&pinctrl_lpi2c2>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		nxp,wdog_b-warm-reset;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {/*SD Card*/
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	max-frequency = <25000000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX93_PAD_ENET1_MDC__ENET_QOS_MDC                        0x53e
+			MX93_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x53e
+			MX93_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x53e
+			MX93_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x53e
+			MX93_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x53e
+			MX93_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x53e
+			MX93_PAD_ENET1_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK  0x53e
+			MX93_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x53e
+			MX93_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x53e
+			MX93_PAD_ENET1_TD1__ENET_QOS_RGMII_TD1                  0x53e
+			MX93_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x53e
+			MX93_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x53e
+			MX93_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x53e
+			MX93_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x53e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX93_PAD_ENET2_MDC__ENET1_MDC                   0x57e
+			MX93_PAD_ENET2_MDIO__ENET1_MDIO                 0x57e
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0             0x57e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1             0x57e
+			MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2             0x57e
+			MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3             0x57e
+			MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC             0x5fe
+			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL       0x57e
+			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0             0x57e
+			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1             0x57e
+			MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2             0x57e
+			MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3             0x57e
+			MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC             0x5fe
+			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL       0x57e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX93_PAD_I2C2_SCL__LPI2C2_SCL		0x40000b9e
+			MX93_PAD_I2C2_SDA__LPI2C2_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK		0x170e
+			MX93_PAD_SD2_CMD__USDHC2_CMD		0x130e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0	0x130e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1        0x130e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2        0x130e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3        0x130e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT	0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00		0x31e
+		>;
+	};
+};
-- 
2.34.1

[PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Aiuto]

i.Core MX93 is a NXP i.MX93 based SoM by Enigcam which needs to be
mounted on top of Engicam baseboards.

Add support for EDIMM 2.0 Starter Kit hosting i.Core MX93.

Starter Kit main features:

2x LVDS interfaces
HDMI output
Audio out
Mic in
Micro SD card slot
USB 3.0 A port
3x USB 2.0 A port
Gb Ethernet
2x CAN bus, 3x UART interfaces
SIM card slot
M.2 KEY_B slot

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Mirko Ardinghi <mirko.ardinghi@engicam.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Fabio Aiuto <fabio.aiuto@engicam.com>
---
v5 ---> v6:
	- added property in lpuart5 node
	- removed unused sai1 node
	- move Cc tag to Reviewed-by tag
v4 ---> v5:
	- done some property reorder, indentation fixes, node rename,
	  drop/add new lines
	- added Reviewed-by tag
v3 ---> v4:
	- drop wl_reg_on regulator in favor of mmc-pwrseq-simple
	- add Cc tag
v2 ---> v3:
	- fixed dtschema warnings
	- removed regulator-always-on on bt_reg_on
	- fixed clock rate assignment on sgtl5000 node
	- fixed indentation issue
v1 ---> v2:
	- fixed indentation issue
	- fixed missing space issue
	- improved naming of regulator nodes
	- removed unneeded include

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../dts/freescale/imx93-icore-mx93-edimm2.dts | 324 ++++++++++++++++++
 2 files changed, 325 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 045250d0a040..d26c0a458a44 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -226,6 +226,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-icore-mx93-edimm2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-phyboard-segin.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
new file mode 100644
index 000000000000..149707d84165
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-icore-mx93-edimm2.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 NXP
+ * Copyright 2024 Engicam s.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx93-icore-mx93.dtsi"
+
+/ {
+	model = "Engicam i.Core MX93 - EDIMM 2 Starterkit";
+	compatible = "engicam,icore-mx93-edimm2", "engicam,icore-mx93",
+		     "fsl,imx93";
+
+	aliases {
+		rtc1 = &bbnsm_rtc;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	bt_reg_on: regulator-btregon {
+		compatible = "regulator-gpio";
+		regulator-name = "BT_REG_ON";
+		regulator-min-microvolt = <100000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 0x1>, <100000 0x0>;
+		gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8_sgtl: regulator-1v8-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8_sgtl";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_avdd_sgtl: regulator-3v3-avdd-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_avdd_sgtl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_sgtl: regulator-3v3-sgtl {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_sgtl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		rsc_table: rsc-table@2021f000 {
+			reg = <0 0x2021f000 0 0x1000>;
+			no-map;
+		};
+
+		vdevbuffer: vdevbuffer@a4020000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4020000 0 0x100000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@a4000000 {
+			reg = <0 0xa4000000 0 0x8000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@a4008000 {
+			reg = <0 0xa4008000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring0: vdev1vring0@a4000000 {
+			reg = <0 0xa4010000 0 0x8000>;
+			no-map;
+		};
+
+		vdev1vring1: vdev1vring1@a4018000 {
+			reg = <0 0xa4018000 0 0x8000>;
+			no-map;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx93-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		/*simple-audio-card,mclk-fs = <1>;*/
+
+		simple-audio-card,cpu {
+			sound-dai = <&sai3>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk IMX93_CLK_SAI3_IPG>;
+		};
+	};
+
+	usdhc3_pwrseq: usdhc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usdhc3_pwrseq>;
+		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cm33 {
+	mbox-names = "tx", "rx", "rxdb";
+	mboxes = <&mu1 0 1>,
+		 <&mu1 1 1>,
+		 <&mu1 3 1>;
+	memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
+			<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>;
+	status = "okay";
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	fsl,stop-mode = <&aonmix_ns_gpr 0x10 4>;
+	status = "okay";
+};
+
+&lpi2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		VDDA-supply = <&reg_3v3_avdd_sgtl>;
+		VDDIO-supply = <&reg_3v3_sgtl>;
+		VDDD-supply = <&reg_1v8_sgtl>;
+		status = "okay";
+	};
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart5 { /* RS485 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&lpuart8 { /* RS232 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart8>;
+	status = "okay";
+};
+
+&micfil {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clk IMX93_CLK_PDM>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <196608000>;
+	status = "okay";
+};
+
+&mu1 {
+	status = "okay";
+};
+
+&mu2 {
+	status = "okay";
+};
+
+&sai3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sai3>;
+	assigned-clocks = <&clk IMX93_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+	assigned-clock-rates = <24576000>;
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&usdhc3 { /* WiFi */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3>;
+	pinctrl-2 = <&pinctrl_usdhc3>;
+	mmc-pwrseq = <&usdhc3_pwrseq>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	max-frequency = <25000000>;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_bluetooth: bluetoothgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO19__GPIO2_IO19		0x31e /* BT_REG_ON */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX93_PAD_PDM_CLK__CAN1_TX		0x139e
+			MX93_PAD_PDM_BIT_STREAM0__CAN1_RX	0x139e
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO25__CAN2_TX		0x139e
+			MX93_PAD_GPIO_IO27__CAN2_RX		0x139e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX93_PAD_I2C1_SCL__LPI2C1_SCL		0x40000b9e
+			MX93_PAD_I2C1_SDA__LPI2C1_SDA		0x40000b9e
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO26__SAI3_TX_SYNC	0x31e
+			MX93_PAD_GPIO_IO16__SAI3_TX_BCLK	0x31e
+			MX93_PAD_GPIO_IO17__SAI3_MCLK		0x31e
+			MX93_PAD_GPIO_IO21__SAI3_TX_DATA00	0x31e
+			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00	0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX		0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX		0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO01__LPUART5_RX		0x31e
+			MX93_PAD_GPIO_IO00__LPUART5_TX		0x31e
+			MX93_PAD_GPIO_IO02__LPUART5_CTS_B	0x31e
+		>;
+	};
+
+	pinctrl_uart8: uart8grp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO13__LPUART8_RX		0x31e
+			MX93_PAD_GPIO_IO12__LPUART8_TX		0x31e
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX93_PAD_SD3_CLK__USDHC3_CLK		0x17fe
+			MX93_PAD_SD3_CMD__USDHC3_CMD		0x13fe
+			MX93_PAD_SD3_DATA0__USDHC3_DATA0	0x13fe
+			MX93_PAD_SD3_DATA1__USDHC3_DATA1        0x13fe
+			MX93_PAD_SD3_DATA2__USDHC3_DATA2        0x13fe
+			MX93_PAD_SD3_DATA3__USDHC3_DATA3        0x13fe
+		>;
+	};
+
+	pinctrl_usdhc3_pwrseq: usdhc3pwrseqgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO22__GPIO2_IO22		0x31e /* WL_REG_ON */
+		>;
+	};
+};
-- 
2.34.1

Re: [PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Estevam]

Hi Fabio,

On Fri, Apr 26, 2024 at 12:31 PM Fabio Aiuto <fabio.aiuto@engicam.com> wrote:

> +&usdhc3 { /* WiFi */
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +       pinctrl-0 = <&pinctrl_usdhc3>;
> +       pinctrl-1 = <&pinctrl_usdhc3>;
> +       pinctrl-2 = <&pinctrl_usdhc3>;
> +       mmc-pwrseq = <&usdhc3_pwrseq>;
> +       bus-width = <4>;
> +       no-1-8-v;
> +       non-removable;
> +       max-frequency = <25000000>;

Is this 25MHz limitation correct?

Re: [PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Michael Nazzareno Trimarchi]

Hi

On Fri, Apr 26, 2024 at 5:56 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> Hi Fabio,
>
> On Fri, Apr 26, 2024 at 12:31 PM Fabio Aiuto <fabio.aiuto@engicam.com> wrote:
>
> > +&usdhc3 { /* WiFi */
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > +       pinctrl-0 = <&pinctrl_usdhc3>;
> > +       pinctrl-1 = <&pinctrl_usdhc3>;
> > +       pinctrl-2 = <&pinctrl_usdhc3>;
> > +       mmc-pwrseq = <&usdhc3_pwrseq>;
> > +       bus-width = <4>;
> > +       no-1-8-v;
> > +       non-removable;
> > +       max-frequency = <25000000>;
>
> Is this 25MHz limitation correct?

This make the wifi a bit slow ;). You should be able to go to ~50Mhz at
3.3v. BTW the other mux
are not needed "state_100mhz", "state_200mhz";

Sorry both Fabio, I did not see before

Michael


Michael




--
Michael Nazzareno Trimarchi
Co-Founder & Chief Executive Officer
M. +39 347 913 2170
michael@amarulasolutions.com
__________________________________

Amarula Solutions BV
Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
T. +31 (0)85 111 9172
info@amarulasolutions.com
www.amarulasolutions.com

Re: [PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Aiuto]

Hello Michael,

Il Fri, Apr 26, 2024 at 05:59:39PM +0200, Michael Nazzareno Trimarchi ha scritto:
> Hi
> 
> On Fri, Apr 26, 2024 at 5:56 PM Fabio Estevam <festevam@gmail.com> wrote:
> >
> > Hi Fabio,
> >
> > On Fri, Apr 26, 2024 at 12:31 PM Fabio Aiuto <fabio.aiuto@engicam.com> wrote:
> >
> > > +&usdhc3 { /* WiFi */
> > > +       #address-cells = <1>;
> > > +       #size-cells = <0>;
> > > +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > > +       pinctrl-0 = <&pinctrl_usdhc3>;
> > > +       pinctrl-1 = <&pinctrl_usdhc3>;
> > > +       pinctrl-2 = <&pinctrl_usdhc3>;
> > > +       mmc-pwrseq = <&usdhc3_pwrseq>;
> > > +       bus-width = <4>;
> > > +       no-1-8-v;
> > > +       non-removable;
> > > +       max-frequency = <25000000>;
> >
> > Is this 25MHz limitation correct?
> 
> This make the wifi a bit slow ;). You should be able to go to ~50Mhz at
> 3.3v. BTW the other mux
> are not needed "state_100mhz", "state_200mhz";
> 
> Sorry both Fabio, I did not see before
> 
> Michael

thanks for your comment, will get in touch with my colleagues
on monday, then I will give a feedback.

kr,

fabio

> 
> 
> Michael
> 
> 
> 
> 
> --
> Michael Nazzareno Trimarchi
> Co-Founder & Chief Executive Officer
> M. +39 347 913 2170
> michael@amarulasolutions.com
> __________________________________
> 
> Amarula Solutions BV
> Joop Geesinkweg 125, 1114 AB, Amsterdam, NL
> T. +31 (0)85 111 9172
> info@amarulasolutions.com
> www.amarulasolutions.com

Re: [PATCH v6 3/3] arm64: dts: imx93: Add Engicam i.Core MX93 EDIMM 2.0 Starter Kit

[Fabio Aiuto]

Dear Fabio,

Il Fri, Apr 26, 2024 at 12:56:11PM -0300, Fabio Estevam ha scritto:
> Hi Fabio,
> 
> On Fri, Apr 26, 2024 at 12:31 PM Fabio Aiuto <fabio.aiuto@engicam.com> wrote:
> 
> > +&usdhc3 { /* WiFi */
> > +       #address-cells = <1>;
> > +       #size-cells = <0>;
> > +       pinctrl-names = "default", "state_100mhz", "state_200mhz";
> > +       pinctrl-0 = <&pinctrl_usdhc3>;
> > +       pinctrl-1 = <&pinctrl_usdhc3>;
> > +       pinctrl-2 = <&pinctrl_usdhc3>;
> > +       mmc-pwrseq = <&usdhc3_pwrseq>;
> > +       bus-width = <4>;
> > +       no-1-8-v;
> > +       non-removable;
> > +       max-frequency = <25000000>;
> 
> Is this 25MHz limitation correct?

I will let you know next week,
thanks for your time spent reviewing,

kr,

fabio