From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: fernando.pacheco@intel.com, Matthew Auld <matthew.auld@intel.com>
Subject: [Intel-gfx] [PATCH 01/37] drm/i915/rkl: Add DPLL4 support
Date: Wed, 20 May 2020 17:37:27 -0700 [thread overview]
Message-ID: <20200521003803.18936-2-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20200521003803.18936-1-lucas.demarchi@intel.com>
From: Matt Roper <matthew.d.roper@intel.com>
Rocket Lake has a third DPLL (called 'DPLL4') that must be used to
enable a third display. Unlike EHL's variant of DPLL4, the RKL variant
behaves the same as DPLL0/1. And despite its name, the DPLL4 registers
are offset as if it were DPLL2, so no extra offset handling is needed
either.
Bspec: 49202
Bspec: 49443
Bspec: 50288
Bspec: 50289
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-20-matthew.d.roper@intel.com
---
drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 28 +++++++++++++++++--
1 file changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index b45185b80bec..196d9eb3a77b 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3506,13 +3506,19 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
return false;
}
- if (IS_ELKHARTLAKE(dev_priv) && port != PORT_A)
+ if (IS_ROCKETLAKE(dev_priv)) {
dpll_mask =
BIT(DPLL_ID_EHL_DPLL4) |
BIT(DPLL_ID_ICL_DPLL1) |
BIT(DPLL_ID_ICL_DPLL0);
- else
+ } else if (IS_ELKHARTLAKE(dev_priv) && port != PORT_A) {
+ dpll_mask =
+ BIT(DPLL_ID_EHL_DPLL4) |
+ BIT(DPLL_ID_ICL_DPLL1) |
+ BIT(DPLL_ID_ICL_DPLL0);
+ } else {
dpll_mask = BIT(DPLL_ID_ICL_DPLL1) | BIT(DPLL_ID_ICL_DPLL0);
+ }
port_dpll->pll = intel_find_shared_dpll(state, crtc,
&port_dpll->hw_state,
@@ -4275,6 +4281,20 @@ static const struct intel_dpll_mgr tgl_pll_mgr = {
.dump_hw_state = icl_dump_hw_state,
};
+static const struct dpll_info rkl_plls[] = {
+ { "DPLL 0", &combo_pll_funcs, DPLL_ID_ICL_DPLL0, 0 },
+ { "DPLL 1", &combo_pll_funcs, DPLL_ID_ICL_DPLL1, 0 },
+ { "DPLL 4", &combo_pll_funcs, DPLL_ID_EHL_DPLL4, 0 },
+ { },
+};
+
+static const struct intel_dpll_mgr rkl_pll_mgr = {
+ .dpll_info = rkl_plls,
+ .get_dplls = icl_get_dplls,
+ .put_dplls = icl_put_dplls,
+ .dump_hw_state = icl_dump_hw_state,
+};
+
/**
* intel_shared_dpll_init - Initialize shared DPLLs
* @dev: drm device
@@ -4288,7 +4308,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
const struct dpll_info *dpll_info;
int i;
- if (INTEL_GEN(dev_priv) >= 12)
+ if (IS_ROCKETLAKE(dev_priv))
+ dpll_mgr = &rkl_pll_mgr;
+ else if (INTEL_GEN(dev_priv) >= 12)
dpll_mgr = &tgl_pll_mgr;
else if (IS_ELKHARTLAKE(dev_priv))
dpll_mgr = &ehl_pll_mgr;
--
2.26.2
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2020-05-21 0:38 UTC|newest]
Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-21 0:37 [Intel-gfx] [PATCH 00/37] Introduce DG1 Lucas De Marchi
2020-05-21 0:37 ` Lucas De Marchi [this message]
2020-05-21 0:37 ` [Intel-gfx] [PATCH 02/37] drm/i915/rkl: Add DDC pin mapping Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 03/37] drm/i915/rkl: Setup ports/phys Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 04/37] drm/i915/rkl: provide port/phy mapping for vbt Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 05/37] drm/i915/rkl: Handle HTI Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 06/37] drm/i915/rkl: Handle comp master/slave relationships for PHYs Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 07/37] drm/i915/rkl: Add initial workarounds Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 08/37] drm/i915: make intel_{uncore, de}_rmw() more useful Lucas De Marchi
2020-05-21 17:24 ` Souza, Jose
2020-05-21 17:30 ` Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 09/37] drm/i915: Add has_master_unit_irq flag Lucas De Marchi
2020-05-26 18:10 ` Souza, Jose
2020-05-21 0:37 ` [Intel-gfx] [PATCH 10/37] drm/i915: add pcie snoop flag Lucas De Marchi
2020-05-21 8:15 ` Chris Wilson
2020-05-21 0:37 ` [Intel-gfx] [PATCH 11/37] drm/i915/dg1: add initial DG-1 definitions Lucas De Marchi
2020-05-26 17:34 ` Souza, Jose
2020-05-26 17:51 ` Lucas De Marchi
2020-05-26 18:02 ` Souza, Jose
2020-05-26 17:51 ` Souza, Jose
2020-05-21 0:37 ` [Intel-gfx] [PATCH 12/37] drm/i915/dg1: Add DG1 PCI IDs Lucas De Marchi
2020-05-26 17:35 ` Souza, Jose
2020-05-21 0:37 ` [Intel-gfx] [PATCH 13/37] drm/i915/dg1: Add fake PCH Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 14/37] drm/i915/dg1: Initialize RAWCLK properly Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 15/37] drm/i915/dg1: Define MOCS table for DG1 Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 16/37] drm/i915/dg1: Add DG1 power wells Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 17/37] drm/i915/dg1: Increase mmio size to 4MB Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 18/37] drm/i915/dg1: add support for the master unit interrupt Lucas De Marchi
2020-05-26 18:02 ` Souza, Jose
2020-05-21 0:37 ` [Intel-gfx] [PATCH 19/37] drm/i915/dg1: Wait for pcode/uncore handshake at startup Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 20/37] drm/i915/dg1: Add DPLL macros for DG1 Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 21/37] drm/i915/dg1: Add and setup DPLLs " Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 22/37] drm/i915/dg1: Enable DPLL " Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 23/37] drm/i915/dg1: add hpd interrupt handling Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 24/37] drm/i915/dg1: invert HPD pins Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 25/37] drm/i915/dg1: gmbus pin mapping Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 26/37] drm/i915/dg1: Handle GRF/IC ECC error irq Lucas De Marchi
2020-05-21 8:19 ` Chris Wilson
2020-05-21 0:37 ` [Intel-gfx] [PATCH 27/37] drm/i915/dg1: Log counter on SLM ECC error Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 28/37] drm/i915/dg1: Enable first 2 ports for DG1 Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 29/37] drm/i915/dg1: Don't program PHY_MISC for PHY-C and PHY-D Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 30/37] drm/i915/dg1: Update comp master/slave relationships for PHYs Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 31/37] drm/i915/dg1: Update voltage swing tables for DP Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 32/37] drm/i915/dg1: provide port/phy mapping for vbt Lucas De Marchi
2020-05-21 0:37 ` [Intel-gfx] [PATCH 33/37] drm/i915/dg1: map/unmap pll clocks Lucas De Marchi
2020-05-21 0:38 ` [Intel-gfx] [PATCH 34/37] drm/i915/dg1: enable PORT C/D aka D/E Lucas De Marchi
2020-05-21 0:38 ` [Intel-gfx] [PATCH 35/37] drm/i915/dg1: Load DMC Lucas De Marchi
2020-05-26 17:42 ` Souza, Jose
2020-05-26 17:49 ` Lucas De Marchi
2020-05-21 0:38 ` [Intel-gfx] [PATCH 36/37] drm/i915/dg1: Add initial DG1 workarounds Lucas De Marchi
2020-05-21 0:38 ` [Intel-gfx] [PATCH 37/37] drm/i915/dg1: Remove SHPD_FILTER_CNT register programming Lucas De Marchi
2020-05-26 17:44 ` Souza, Jose
2020-05-21 1:05 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce DG1 Patchwork
2020-05-21 1:06 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-05-21 1:26 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-05-21 18:34 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200521003803.18936-2-lucas.demarchi@intel.com \
--to=lucas.demarchi@intel.com \
--cc=fernando.pacheco@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=matthew.auld@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).