[Intel-gfx] [V3 5/7] drm/i915: Get proper min cdclk if vDSC enabled

[Lee Shawn C <shawn.c.lee@intel.com>]

VDSC engine can process only 1 pixel per Cd clock. In case
VDSC is used and max slice count == 1, max supported pixel
clock should be 100% of CD clock. Then do min_cdclk and
pixel clock comparison to get proper min cdclk.

v2:
- Check for dsc enable and slice count ==1 then allow to
  double confirm min cdclk value.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Cc: William Tseng <william.tseng@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 71067a62264d..3e09f6370d27 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -2159,6 +2159,16 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
 	/* Account for additional needs from the planes */
 	min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
 
+	/*
+	 * VDSC engine can process only 1 pixel per Cd clock.
+	 * In case VDSC is used and max slice count == 1,
+	 * max supported pixel clock should be 100% of CD clock.
+	 * Then do min_cdclk and pixel clock comparison to get cdclk.
+	 */
+	if (crtc_state->dsc.compression_enable &&
+	    crtc_state->dsc.slice_count == 1)
+		min_cdclk = max(min_cdclk, (int)crtc_state->pixel_rate);
+
 	/*
 	 * HACK. Currently for TGL platforms we calculate
 	 * min_cdclk initially based on pixel_rate divided
-- 
2.17.1

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx