[Intel-gfx] [PATCH 0/7] drm/i915: Add HWMON support

[Intel-gfx] [PATCH 0/7] drm/i915: Add HWMON support

[Badal Nilawar]

This series adds the HWMON support for DGFX

v2:
  - Reorganized series. Created first patch as infrastructure patch
    followed by feature patches. (Ashutosh)
  - Fixed review comments (Jani)
  - Fixed review comments (Ashutosh)

v3:
  - Fixed review comments from Guenter
  - Exposed energy inferface as standard hwmon interface (Ashutosh)
  - For power interface added entries for critical power and maintained
    standard interface for all the entries except 
    power1_max_interval
  - Extended support for XEHPSDV (Ashutosh)

v4:
  - Fixed review comment from Guenter
  - Cleaned up unused code

Ashutosh Dixit (2):
  drm/i915/hwmon: Expose card reactive critical power
  drm/i915/hwmon: Expose power1_max_interval

Dale B Stimson (4):
  drm/i915/hwmon: Add HWMON infrastructure
  drm/i915/hwmon: Power PL1 limit and TDP setting
  drm/i915/hwmon: Show device level energy usage
  drm/i915/hwmon: Extend power/energy for XEHPSDV

Riana Tauro (1):
  drm/i915/hwmon: Add HWMON current voltage support

 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  75 ++
 drivers/gpu/drm/i915/Makefile                 |   3 +
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |   8 +
 drivers/gpu/drm/i915/i915_driver.c            |   7 +
 drivers/gpu/drm/i915/i915_drv.h               |   2 +
 drivers/gpu/drm/i915/i915_hwmon.c             | 787 ++++++++++++++++++
 drivers/gpu/drm/i915/i915_hwmon.h             |  21 +
 drivers/gpu/drm/i915/i915_reg.h               |  22 +
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |  13 +
 9 files changed, 938 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h

-- 
2.25.1

[Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Badal Nilawar]

From: Dale B Stimson <dale.b.stimson@intel.com>

The i915 HWMON module will be used to expose voltage, power and energy
values for dGfx. Here we set up i915 hwmon infrastructure including i915
hwmon registration, basic data structures and functions.

v2:
  - Create HWMON infra patch (Ashutosh)
  - Fixed review comments (Jani)
  - Remove "select HWMON" from i915/Kconfig (Jani)
v3: Use hwm_ prefix for static functions (Ashutosh)
v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
    doesn't work if hwmon is compiled as a module (Guenter)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
---
 drivers/gpu/drm/i915/Makefile      |   3 +
 drivers/gpu/drm/i915/i915_driver.c |   7 ++
 drivers/gpu/drm/i915/i915_drv.h    |   2 +
 drivers/gpu/drm/i915/i915_hwmon.c  | 135 +++++++++++++++++++++++++++++
 drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
 5 files changed, 167 insertions(+)
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
 create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h

diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 522ef9b4aff3..2b235f747490 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -208,6 +208,9 @@ i915-y += gt/uc/intel_uc.o \
 # graphics system controller (GSC) support
 i915-y += gt/intel_gsc.o
 
+# graphics hardware monitoring (HWMON) support
+i915-$(CONFIG_HWMON) += i915_hwmon.o
+
 # modesetting core code
 i915-y += \
 	display/hsw_ips.o \
diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
index deb8a8b76965..62340cd01dde 100644
--- a/drivers/gpu/drm/i915/i915_driver.c
+++ b/drivers/gpu/drm/i915/i915_driver.c
@@ -80,6 +80,7 @@
 #include "i915_drm_client.h"
 #include "i915_drv.h"
 #include "i915_getparam.h"
+#include "i915_hwmon.h"
 #include "i915_ioc32.h"
 #include "i915_ioctl.h"
 #include "i915_irq.h"
@@ -736,6 +737,9 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
 
 	intel_gt_driver_register(to_gt(dev_priv));
 
+#if IS_REACHABLE(CONFIG_HWMON)
+	i915_hwmon_register(dev_priv);
+#endif
 	intel_display_driver_register(dev_priv);
 
 	intel_power_domains_enable(dev_priv);
@@ -762,6 +766,9 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
 
 	intel_display_driver_unregister(dev_priv);
 
+#if IS_REACHABLE(CONFIG_HWMON)
+	i915_hwmon_unregister(dev_priv);
+#endif
 	intel_gt_driver_unregister(to_gt(dev_priv));
 
 	i915_perf_unregister(dev_priv);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 086bbe8945d6..d437d588dec9 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -705,6 +705,8 @@ struct drm_i915_private {
 
 	struct i915_perf perf;
 
+	struct i915_hwmon *hwmon;
+
 	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
 	struct intel_gt gt0;
 
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
new file mode 100644
index 000000000000..5b80a0f024f0
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/types.h>
+
+#include "i915_drv.h"
+#include "i915_hwmon.h"
+#include "intel_mchbar_regs.h"
+
+struct hwm_reg {
+};
+
+struct hwm_drvdata {
+	struct i915_hwmon *hwmon;
+	struct intel_uncore *uncore;
+	struct device *hwmon_dev;
+	char name[12];
+};
+
+struct i915_hwmon {
+	struct hwm_drvdata ddat;
+	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
+	struct hwm_reg rg;
+};
+
+static const struct hwmon_channel_info *hwm_info[] = {
+	NULL
+};
+
+static umode_t
+hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+	       u32 attr, int channel)
+{
+	switch (type) {
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	 int channel, long *val)
+{
+	switch (type) {
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	  int channel, long val)
+{
+	switch (type) {
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops hwm_ops = {
+	.is_visible = hwm_is_visible,
+	.read = hwm_read,
+	.write = hwm_write,
+};
+
+static const struct hwmon_chip_info hwm_chip_info = {
+	.ops = &hwm_ops,
+	.info = hwm_info,
+};
+
+static void
+hwm_get_preregistration_info(struct drm_i915_private *i915)
+{
+}
+
+void i915_hwmon_register(struct drm_i915_private *i915)
+{
+	struct device *dev = i915->drm.dev;
+	struct i915_hwmon *hwmon;
+	struct device *hwmon_dev;
+	struct hwm_drvdata *ddat;
+
+	/* hwmon is available only for dGfx */
+	if (!IS_DGFX(i915))
+		return;
+
+	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
+	if (!hwmon)
+		return;
+
+	i915->hwmon = hwmon;
+	mutex_init(&hwmon->hwmon_lock);
+	ddat = &hwmon->ddat;
+
+	ddat->hwmon = hwmon;
+	ddat->uncore = &i915->uncore;
+	snprintf(ddat->name, sizeof(ddat->name), "i915");
+
+	hwm_get_preregistration_info(i915);
+
+	/*  hwmon_dev points to device hwmon<i> */
+	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
+						    ddat,
+						    &hwm_chip_info,
+						    NULL);
+	if (IS_ERR(hwmon_dev)) {
+		mutex_destroy(&hwmon->hwmon_lock);
+		i915->hwmon = NULL;
+		kfree(hwmon);
+		return;
+	}
+
+	ddat->hwmon_dev = hwmon_dev;
+}
+
+void i915_hwmon_unregister(struct drm_i915_private *i915)
+{
+	struct i915_hwmon *hwmon;
+	struct hwm_drvdata *ddat;
+
+	hwmon = fetch_and_zero(&i915->hwmon);
+	if (!hwmon)
+		return;
+
+	ddat = &hwmon->ddat;
+	if (ddat->hwmon_dev)
+		hwmon_device_unregister(ddat->hwmon_dev);
+
+	mutex_destroy(&hwmon->hwmon_lock);
+	kfree(hwmon);
+}
diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
new file mode 100644
index 000000000000..921ae76099d3
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_hwmon.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: MIT */
+
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __I915_HWMON_H__
+#define __I915_HWMON_H__
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+#include "i915_reg.h"
+
+struct drm_i915_private;
+
+void i915_hwmon_register(struct drm_i915_private *i915);
+void i915_hwmon_unregister(struct drm_i915_private *i915);
+
+#endif /* __I915_HWMON_H__ */
-- 
2.25.1

[Intel-gfx] [PATCH 2/7] drm/i915/hwmon: Add HWMON current voltage support

[Badal Nilawar]

From: Riana Tauro <riana.tauro@intel.com>

Use i915 HWMON subsystem to display current input voltage.

v2:
  - Updated date and kernel version in feature description
  - Fixed review comments (Ashutosh)
v3: Use macro HWMON_CHANNEL_INFO to define hwmon channel (Guenter)
v4:
  - Fixed review comments (Ashutosh)
  - Use hwm_ prefix for static functions (Ashutosh)

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  7 +++
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |  3 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 47 +++++++++++++++++++
 3 files changed, 57 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
new file mode 100644
index 000000000000..24c4b7477d51
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -0,0 +1,7 @@
+What:		/sys/devices/.../hwmon/hwmon<i>/in0_input
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RO. Current Voltage in millivolt.
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
index 94f9ddcfb3a5..5d4fbda4d326 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
@@ -1508,6 +1508,9 @@
 #define VLV_RENDER_C0_COUNT			_MMIO(0x138118)
 #define VLV_MEDIA_C0_COUNT			_MMIO(0x13811c)
 
+#define GEN12_RPSTAT1				_MMIO(0x1381b4)
+#define   GEN12_VOLTAGE_MASK			REG_GENMASK(10, 0)
+
 #define GEN11_GT_INTR_DW(x)			_MMIO(0x190018 + ((x) * 4))
 #define   GEN11_CSME				(31)
 #define   GEN11_GUNIT				(28)
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 5b80a0f024f0..1893efe796a4 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -10,8 +10,10 @@
 #include "i915_drv.h"
 #include "i915_hwmon.h"
 #include "intel_mchbar_regs.h"
+#include "gt/intel_gt_regs.h"
 
 struct hwm_reg {
+	i915_reg_t gt_perf_status;
 };
 
 struct hwm_drvdata {
@@ -28,14 +30,49 @@ struct i915_hwmon {
 };
 
 static const struct hwmon_channel_info *hwm_info[] = {
+	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	NULL
 };
 
+static umode_t
+hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	switch (attr) {
+	case hwmon_in_input:
+		return i915_mmio_reg_valid(ddat->hwmon->rg.gt_perf_status) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 reg_value;
+
+	switch (attr) {
+	case hwmon_in_input:
+		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+			reg_value = intel_uncore_read(ddat->uncore, hwmon->rg.gt_perf_status);
+		/* In units of 2.5 millivolt */
+		*val = DIV_ROUND_CLOSEST(REG_FIELD_GET(GEN12_VOLTAGE_MASK, reg_value) * 25, 10);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
 {
+	struct hwm_drvdata *ddat = (struct hwm_drvdata *)drvdata;
+
 	switch (type) {
+	case hwmon_in:
+		return hwm_in_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -45,7 +82,11 @@ static int
 hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	 int channel, long *val)
 {
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
 	switch (type) {
+	case hwmon_in:
+		return hwm_in_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -75,6 +116,12 @@ static const struct hwmon_chip_info hwm_chip_info = {
 static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
+	struct i915_hwmon *hwmon = i915->hwmon;
+
+	if (IS_DG1(i915) || IS_DG2(i915))
+		hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
+	else
+		hwmon->rg.gt_perf_status = INVALID_MMIO_REG;
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
-- 
2.25.1

[Intel-gfx] [PATCH 3/7] drm/i915/hwmon: Power PL1 limit and TDP setting

[Badal Nilawar]

From: Dale B Stimson <dale.b.stimson@intel.com>

Use i915 HWMON to display/modify dGfx power PL1 limit and TDP setting.

v2:
  - Fix review comments (Ashutosh)
  - Do not restore power1_max upon module unload/load sequence
    because on production systems modules are always loaded
    and not unloaded/reloaded (Ashutosh)
  - Fix review comments (Jani)
  - Remove endianness conversion (Ashutosh)
v3: Add power1_rated_max (Ashutosh)
v4:
  - Use macro HWMON_CHANNEL_INFO to define power channel (Guenter)
  - Update the date and kernel version in Documentation (Badal)
v5: Use hwm_ prefix for static functions (Ashutosh)

Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |  20 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 175 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  16 ++
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 +
 4 files changed, 216 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 24c4b7477d51..9a2d10edfce8 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -5,3 +5,23 @@ Contact:	dri-devel@lists.freedesktop.org
 Description:	RO. Current Voltage in millivolt.
 
 		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive sustained  (PL1/Tau) power limit in microwatts.
+
+		The power controller will throttle the operating frequency
+		if the power averaged over a window (typically seconds)
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_rated_max
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RO. Card default power limit (default TDP setting).
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 1893efe796a4..ccda7b690435 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -12,8 +12,22 @@
 #include "intel_mchbar_regs.h"
 #include "gt/intel_gt_regs.h"
 
+/*
+ * SF_* - scale factors for particular quantities according to hwmon spec.
+ * - power  - microwatts
+ */
+#define SF_POWER	1000000
+
+#define FIELD_SHIFT(__mask)				    \
+	(BUILD_BUG_ON_ZERO(!__builtin_constant_p(__mask)) + \
+		BUILD_BUG_ON_ZERO((__mask) == 0) +	    \
+		__bf_shf(__mask))
+
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
+	i915_reg_t pkg_power_sku_unit;
+	i915_reg_t pkg_power_sku;
+	i915_reg_t pkg_rapl_limit;
 };
 
 struct hwm_drvdata {
@@ -27,10 +41,69 @@ struct i915_hwmon {
 	struct hwm_drvdata ddat;
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
+	int scl_shift_power;
 };
 
+static void
+hwm_locked_with_pm_intel_uncore_rmw(struct hwm_drvdata *ddat,
+				    i915_reg_t reg, u32 clear, u32 set)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	struct intel_uncore *uncore = ddat->uncore;
+	intel_wakeref_t wakeref;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		intel_uncore_rmw(uncore, reg, clear, set);
+
+	mutex_unlock(&hwmon->hwmon_lock);
+}
+
+/*
+ * This function's return type of u64 allows for the case where the scaling
+ * of the field taken from the 32-bit register value might cause a result to
+ * exceed 32 bits.
+ */
+static u64
+hwm_field_read_and_scale(struct hwm_drvdata *ddat, i915_reg_t rgadr,
+			 u32 field_msk, int field_shift,
+			 int nshift, u32 scale_factor)
+{
+	struct intel_uncore *uncore = ddat->uncore;
+	intel_wakeref_t wakeref;
+	u32 reg_value;
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		reg_value = intel_uncore_read(uncore, rgadr);
+
+	reg_value = (reg_value & field_msk) >> field_shift;
+
+	return mul_u64_u32_shr(reg_value, scale_factor, nshift);
+}
+
+static void
+hwm_field_scale_and_write(struct hwm_drvdata *ddat, i915_reg_t rgadr,
+			  u32 field_msk, int field_shift,
+			  int nshift, unsigned int scale_factor, long lval)
+{
+	u32 nval;
+	u32 bits_to_clear;
+	u32 bits_to_set;
+
+	/* Computation in 64-bits to avoid overflow. Round to nearest. */
+	nval = DIV_ROUND_CLOSEST_ULL((u64)lval << nshift, scale_factor);
+
+	bits_to_clear = field_msk;
+	bits_to_set = (nval << field_shift) & field_msk;
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, rgadr,
+					    bits_to_clear, bits_to_set);
+}
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
 	NULL
 };
 
@@ -64,6 +137,67 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
+	case hwmon_power_rated_max:
+		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		*val = hwm_field_read_and_scale(ddat,
+						hwmon->rg.pkg_rapl_limit,
+						PKG_PWR_LIM_1,
+						FIELD_SHIFT(PKG_PWR_LIM_1),
+						hwmon->scl_shift_power,
+						SF_POWER);
+		return 0;
+	case hwmon_power_rated_max:
+		*val = hwm_field_read_and_scale(ddat,
+						hwmon->rg.pkg_power_sku,
+						PKG_PKG_TDP,
+						FIELD_SHIFT(PKG_PKG_TDP),
+						hwmon->scl_shift_power,
+						SF_POWER);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	switch (attr) {
+	case hwmon_power_max:
+		hwm_field_scale_and_write(ddat,
+					  hwmon->rg.pkg_rapl_limit,
+					  PKG_PWR_LIM_1,
+					  FIELD_SHIFT(PKG_PWR_LIM_1),
+					  hwmon->scl_shift_power,
+					  SF_POWER, val);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -73,6 +207,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	switch (type) {
 	case hwmon_in:
 		return hwm_in_is_visible(ddat, attr);
+	case hwmon_power:
+		return hwm_power_is_visible(ddat, attr, channel);
 	default:
 		return 0;
 	}
@@ -87,6 +223,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_in:
 		return hwm_in_read(ddat, attr, val);
+	case hwmon_power:
+		return hwm_power_read(ddat, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -96,7 +234,11 @@ static int
 hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	  int channel, long val)
 {
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
 	switch (type) {
+	case hwmon_power:
+		return hwm_power_write(ddat, attr, channel, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -117,11 +259,40 @@ static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
 	struct i915_hwmon *hwmon = i915->hwmon;
+	struct intel_uncore *uncore = &i915->uncore;
+	intel_wakeref_t wakeref;
+	u32 val_sku_unit;
 
-	if (IS_DG1(i915) || IS_DG2(i915))
+	if (IS_DG1(i915) || IS_DG2(i915)) {
 		hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
-	else
+		hwmon->rg.pkg_power_sku_unit = PCU_PACKAGE_POWER_SKU_UNIT;
+		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
+		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
+	} else {
 		hwmon->rg.gt_perf_status = INVALID_MMIO_REG;
+		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
+		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
+		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
+	}
+
+	with_intel_runtime_pm(uncore->rpm, wakeref) {
+		/*
+		 * The contents of register hwmon->rg.pkg_power_sku_unit do not change,
+		 * so read it once and store the shift values.
+		 *
+		 * For some platforms, this value is defined as available "for all
+		 * tiles", with the values consistent across all tiles.
+		 * In this case, use the tile 0 value for all.
+		 */
+		if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku_unit)) {
+			val_sku_unit = intel_uncore_read(uncore,
+							 hwmon->rg.pkg_power_sku_unit);
+		} else {
+			val_sku_unit = 0;
+		}
+
+		hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
+	}
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 50d7bfd541ad..78c7ce781c22 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1866,6 +1866,22 @@
 #define   POWER_LIMIT_1_MASK		REG_BIT(11)
 #define   POWER_LIMIT_2_MASK		REG_BIT(12)
 
+/*
+ * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
+ * Used herein as a 64-bit register.
+ * These masks are defined using GENMASK_ULL as REG_GENMASK is limited to u32
+ * and as GENMASK is "long" and therefore 32-bits on a 32-bit system.
+ * PKG_PKG_TDP, PKG_MIN_PWR, and PKG_MAX_PWR are scaled in the same way as
+ * PKG_PWR_LIM_*, above.
+ * PKG_MAX_WIN has sub-fields for x and y, and has the value: is 1.x * 2^y.
+ */
+#define   PKG_PKG_TDP			GENMASK_ULL(14, 0)
+#define   PKG_MIN_PWR			GENMASK_ULL(30, 16)
+#define   PKG_MAX_PWR			GENMASK_ULL(46, 32)
+#define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_Y		GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_X		GENMASK_ULL(52, 48)
+
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
 #define   CLK_CTL2_CZCOUNT_30NS_SHIFT	28
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 2aad2f0cc8db..4ba5f30b7901 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -189,6 +189,10 @@
 #define  DG1_QCLK_RATIO_MASK			REG_GENMASK(9, 2)
 #define  DG1_QCLK_REFERENCE			REG_BIT(10)
 
+#define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
+#define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
+#define   PKG_TIME_UNIT				REG_GENMASK(19, 16)
+
 #define GEN6_GT_PERF_STATUS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5948)
 #define GEN6_RP_STATE_LIMITS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994)
 #define GEN6_RP_STATE_CAP			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5998)
@@ -196,6 +200,9 @@
 #define   RP1_CAP_MASK				REG_GENMASK(15, 8)
 #define   RPN_CAP_MASK				REG_GENMASK(23, 16)
 
+#define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
+#define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
 #define   SSKPD_NEW_WM0_MASK_HSW		REG_GENMASK64(63, 56)
-- 
2.25.1

[Intel-gfx] [PATCH 4/7] drm/i915/hwmon: Show device level energy usage

[Badal Nilawar]

From: Dale B Stimson <dale.b.stimson@intel.com>

Use i915 HWMON to display device level energy input.

v2:
  - Updated the date and kernel version in feature description

Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   8 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 119 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_hwmon.h             |   1 +
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   2 +
 4 files changed, 128 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 9a2d10edfce8..03d71c6869d3 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -25,3 +25,11 @@ Contact:	dri-devel@lists.freedesktop.org
 Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RO. Energy input of device in microjoules.
+
+		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index ccda7b690435..d6334f829c8c 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -15,8 +15,10 @@
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - power  - microwatts
+ * - energy - microjoules
  */
 #define SF_POWER	1000000
+#define SF_ENERGY	1000000
 
 #define FIELD_SHIFT(__mask)				    \
 	(BUILD_BUG_ON_ZERO(!__builtin_constant_p(__mask)) + \
@@ -28,12 +30,19 @@ struct hwm_reg {
 	i915_reg_t pkg_power_sku_unit;
 	i915_reg_t pkg_power_sku;
 	i915_reg_t pkg_rapl_limit;
+	i915_reg_t energy_status_all;
+};
+
+struct hwm_energy_info {
+	u32 reg_val_prev;
+	long accum_energy;			/* Accumulated energy for energy1_input */
 };
 
 struct hwm_drvdata {
 	struct i915_hwmon *hwmon;
 	struct intel_uncore *uncore;
 	struct device *hwmon_dev;
+	struct hwm_energy_info ei;		/*  Energy info for energy1_input */
 	char name[12];
 };
 
@@ -42,6 +51,7 @@ struct i915_hwmon {
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
 	int scl_shift_power;
+	int scl_shift_energy;
 };
 
 static void
@@ -101,9 +111,72 @@ hwm_field_scale_and_write(struct hwm_drvdata *ddat, i915_reg_t rgadr,
 					    bits_to_clear, bits_to_set);
 }
 
+/*
+ * hwm_energy - Obtain energy value
+ *
+ * The underlying energy hardware register is 32-bits and is subject to
+ * overflow. How long before overflow? For example, with an example
+ * scaling bit shift of 14 bits (see register *PACKAGE_POWER_SKU_UNIT) and
+ * a power draw of 1000 watts, the 32-bit counter will overflow in
+ * approximately 4.36 minutes.
+ *
+ * Examples:
+ *    1 watt:  (2^32 >> 14) /    1 W / (60 * 60 * 24) secs/day -> 3 days
+ * 1000 watts: (2^32 >> 14) / 1000 W / 60             secs/min -> 4.36 minutes
+ *
+ * The function significantly increases overflow duration (from 4.36
+ * minutes) by accumulating the energy register into a 'long' as allowed by
+ * the hwmon API. Using x86_64 128 bit arithmetic (see mul_u64_u32_shr()),
+ * a 'long' of 63 bits, SF_ENERGY of 1e6 (~20 bits) and
+ * hwmon->scl_shift_energy of 14 bits we have 57 (63 - 20 + 14) bits before
+ * energy1_input overflows. This at 1000 W is an overflow duration of 278 years.
+ */
+static int
+hwm_energy(struct hwm_drvdata *ddat, long *energy)
+{
+	struct intel_uncore *uncore = ddat->uncore;
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	struct hwm_energy_info *ei = &ddat->ei;
+	intel_wakeref_t wakeref;
+	i915_reg_t rgaddr;
+	u32 reg_val;
+
+	rgaddr = hwmon->rg.energy_status_all;
+
+	if (!i915_mmio_reg_valid(rgaddr))
+		return -EOPNOTSUPP;
+
+	mutex_lock(&hwmon->hwmon_lock);
+
+	with_intel_runtime_pm(uncore->rpm, wakeref)
+		reg_val = intel_uncore_read(uncore, rgaddr);
+
+	if (reg_val >= ei->reg_val_prev)
+		ei->accum_energy += reg_val - ei->reg_val_prev;
+	else
+		ei->accum_energy += UINT_MAX - ei->reg_val_prev + reg_val;
+	ei->reg_val_prev = reg_val;
+
+	*energy = mul_u64_u32_shr(ei->accum_energy, SF_ENERGY,
+				  hwmon->scl_shift_energy);
+	mutex_unlock(&hwmon->hwmon_lock);
+
+	return 0;
+}
+
+int
+i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
+{
+	struct i915_hwmon *hwmon = i915->hwmon;
+	struct hwm_drvdata *ddat = &hwmon->ddat;
+
+	return hwm_energy(ddat, energy);
+}
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
 	NULL
 };
 
@@ -198,6 +271,32 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 	}
 }
 
+static umode_t
+hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	i915_reg_t rgaddr;
+
+	switch (attr) {
+	case hwmon_energy_input:
+		rgaddr = hwmon->rg.energy_status_all;
+		return i915_mmio_reg_valid(rgaddr) ? 0444 : 0;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	switch (attr) {
+	case hwmon_energy_input:
+		return hwm_energy(ddat, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -209,6 +308,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_in_is_visible(ddat, attr);
 	case hwmon_power:
 		return hwm_power_is_visible(ddat, attr, channel);
+	case hwmon_energy:
+		return hwm_energy_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -225,6 +326,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_in_read(ddat, attr, val);
 	case hwmon_power:
 		return hwm_power_read(ddat, attr, channel, val);
+	case hwmon_energy:
+		return hwm_energy_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -260,19 +363,23 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
 	struct i915_hwmon *hwmon = i915->hwmon;
 	struct intel_uncore *uncore = &i915->uncore;
+	struct hwm_drvdata *ddat = &hwmon->ddat;
 	intel_wakeref_t wakeref;
 	u32 val_sku_unit;
+	long energy;
 
 	if (IS_DG1(i915) || IS_DG2(i915)) {
 		hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
 		hwmon->rg.pkg_power_sku_unit = PCU_PACKAGE_POWER_SKU_UNIT;
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
+		hwmon->rg.energy_status_all = PCU_PACKAGE_ENERGY_STATUS;
 	} else {
 		hwmon->rg.gt_perf_status = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
+		hwmon->rg.energy_status_all = INVALID_MMIO_REG;
 	}
 
 	with_intel_runtime_pm(uncore->rpm, wakeref) {
@@ -290,9 +397,17 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		} else {
 			val_sku_unit = 0;
 		}
-
-		hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	}
+
+	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
+	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+
+	/*
+	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
+	 * first value of the energy register read
+	 */
+	if (i915_mmio_reg_valid(hwmon->rg.energy_status_all))
+		hwm_energy(ddat, &energy);
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
index 921ae76099d3..d5d7f4a0bf4e 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.h
+++ b/drivers/gpu/drm/i915/i915_hwmon.h
@@ -17,4 +17,5 @@ struct drm_i915_private;
 void i915_hwmon_register(struct drm_i915_private *i915);
 void i915_hwmon_unregister(struct drm_i915_private *i915);
 
+int i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy);
 #endif /* __I915_HWMON_H__ */
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 4ba5f30b7901..18fcfc39ca2f 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -191,7 +191,9 @@
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
+#define   PKG_ENERGY_UNIT                      REG_GENMASK(12, 8)
 #define   PKG_TIME_UNIT				REG_GENMASK(19, 16)
+#define PCU_PACKAGE_ENERGY_STATUS              _MMIO(MCHBAR_MIRROR_BASE_SNB + 0x593c)
 
 #define GEN6_GT_PERF_STATUS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5948)
 #define GEN6_RP_STATE_LIMITS			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5994)
-- 
2.25.1

[Intel-gfx] [PATCH 5/7] drm/i915/hwmon: Expose card reactive critical power

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose the card reactive critical (I1) power. I1 is exposed as
power1_crit in microwatts (typically for client products) or as
curr1_crit in milliamperes (typically for server).

v2: Add curr1_crit functionality (Ashutosh)
v3:
  - Use HWMON_CHANNEL_INFO to define power1_crit, curr1_crit (Badal)
  - Update date and kernel version in Documentation.
v4: Use hwm_ prefix for static functions (Ashutosh)

Acked-by: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon | 26 +++++
 drivers/gpu/drm/i915/i915_hwmon.c             | 95 ++++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |  6 ++
 3 files changed, 126 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 03d71c6869d3..bb1101757154 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,32 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in microwatts.
+
+		Card reactive critical (I1) power limit in microwatts is exposed
+		for client products. The power controller will throttle the
+		operating frequency if the power averaged over a window exceeds
+		this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
+What:		/sys/devices/.../hwmon/hwmon<i>/curr1_crit
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Card reactive critical (I1) power limit in milliamperes.
+
+		Card reactive critical (I1) power limit in milliamperes is
+		exposed for server products. The power controller will throttle
+		the operating frequency if the power averaged over a window
+		exceeds this limit.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index d6334f829c8c..1eedcefbf511 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -10,14 +10,17 @@
 #include "i915_drv.h"
 #include "i915_hwmon.h"
 #include "intel_mchbar_regs.h"
+#include "intel_pcode.h"
 #include "gt/intel_gt_regs.h"
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
  * - power  - microwatts
+ * - curr   - milliamperes
  * - energy - microjoules
  */
 #define SF_POWER	1000000
+#define SF_CURR		1000
 #define SF_ENERGY	1000000
 
 #define FIELD_SHIFT(__mask)				    \
@@ -175,11 +178,25 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
-	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX),
+	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
 	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	HWMON_CHANNEL_INFO(curr, HWMON_C_CRIT),
 	NULL
 };
 
+/* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
+static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
+{
+	return snb_pcode_read_p(&i915->uncore, PCODE_POWER_SETUP,
+				POWER_SETUP_SUBCOMMAND_READ_I1, 0, uval);
+}
+
+static int hwm_pcode_write_i1(struct drm_i915_private *i915, u32 uval)
+{
+	return  snb_pcode_write_p(&i915->uncore, PCODE_POWER_SETUP,
+				  POWER_SETUP_SUBCOMMAND_WRITE_I1, 0, uval);
+}
+
 static umode_t
 hwm_in_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 {
@@ -213,13 +230,18 @@ hwm_in_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 static umode_t
 hwm_power_is_visible(const struct hwm_drvdata *ddat, u32 attr, int chan)
 {
+	struct drm_i915_private *i915 = ddat->uncore->i915;
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? 0664 : 0;
 	case hwmon_power_rated_max:
 		return i915_mmio_reg_valid(hwmon->rg.pkg_power_sku) ? 0444 : 0;
+	case hwmon_power_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			!(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
 	default:
 		return 0;
 	}
@@ -229,6 +251,8 @@ static int
 hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	int ret;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -247,6 +271,15 @@ hwm_power_read(struct hwm_drvdata *ddat, u32 attr, int chan, long *val)
 						hwmon->scl_shift_power,
 						SF_POWER);
 		return 0;
+	case hwmon_power_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (!(uval & POWER_SETUP_I1_WATTS))
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_POWER, POWER_SETUP_I1_SHIFT);
+		return 0;
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -256,6 +289,7 @@ static int
 hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 {
 	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 uval;
 
 	switch (attr) {
 	case hwmon_power_max:
@@ -266,6 +300,9 @@ hwm_power_write(struct hwm_drvdata *ddat, u32 attr, int chan, long val)
 					  hwmon->scl_shift_power,
 					  SF_POWER, val);
 		return 0;
+	case hwmon_power_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_POWER);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -297,6 +334,56 @@ hwm_energy_read(struct hwm_drvdata *ddat, u32 attr, long *val)
 	}
 }
 
+static umode_t
+hwm_curr_is_visible(const struct hwm_drvdata *ddat, u32 attr)
+{
+	struct drm_i915_private *i915 = ddat->uncore->i915;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		return (hwm_pcode_read_i1(i915, &uval) ||
+			(uval & POWER_SETUP_I1_WATTS)) ? 0 : 0644;
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_curr_read(struct hwm_drvdata *ddat, u32 attr, long *val)
+{
+	int ret;
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		ret = hwm_pcode_read_i1(ddat->uncore->i915, &uval);
+		if (ret)
+			return ret;
+		if (uval & POWER_SETUP_I1_WATTS)
+			return -ENODEV;
+		*val = mul_u64_u32_shr(REG_FIELD_GET(POWER_SETUP_I1_DATA_MASK, uval),
+				       SF_CURR, POWER_SETUP_I1_SHIFT);
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int
+hwm_curr_write(struct hwm_drvdata *ddat, u32 attr, long val)
+{
+	u32 uval;
+
+	switch (attr) {
+	case hwmon_curr_crit:
+		uval = DIV_ROUND_CLOSEST_ULL(val << POWER_SETUP_I1_SHIFT, SF_CURR);
+		return hwm_pcode_write_i1(ddat->uncore->i915, uval);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static umode_t
 hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 	       u32 attr, int channel)
@@ -310,6 +397,8 @@ hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
 		return hwm_power_is_visible(ddat, attr, channel);
 	case hwmon_energy:
 		return hwm_energy_is_visible(ddat, attr);
+	case hwmon_curr:
+		return hwm_curr_is_visible(ddat, attr);
 	default:
 		return 0;
 	}
@@ -328,6 +417,8 @@ hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 		return hwm_power_read(ddat, attr, channel, val);
 	case hwmon_energy:
 		return hwm_energy_read(ddat, attr, val);
+	case hwmon_curr:
+		return hwm_curr_read(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -342,6 +433,8 @@ hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
 	switch (type) {
 	case hwmon_power:
 		return hwm_power_write(ddat, attr, channel, val);
+	case hwmon_curr:
+		return hwm_curr_write(ddat, attr, val);
 	default:
 		return -EOPNOTSUPP;
 	}
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 78c7ce781c22..3d50b4cda382 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -6676,6 +6676,12 @@
 #define   DG1_PCODE_STATUS			0x7E
 #define     DG1_UNCORE_GET_INIT_STATUS		0x0
 #define     DG1_UNCORE_INIT_STATUS_COMPLETE	0x1
+#define   PCODE_POWER_SETUP			0x7C
+#define     POWER_SETUP_SUBCOMMAND_READ_I1	0x4
+#define     POWER_SETUP_SUBCOMMAND_WRITE_I1	0x5
+#define	    POWER_SETUP_I1_WATTS		REG_BIT(31)
+#define	    POWER_SETUP_I1_SHIFT		6	/* 10.6 fixed point format */
+#define	    POWER_SETUP_I1_DATA_MASK		REG_GENMASK(15, 0)
 #define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US	0x23
 #define   XEHP_PCODE_FREQUENCY_CONFIG		0x6e	/* xehpsdv, pvc */
 /* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */
-- 
2.25.1

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 114 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |   4 +-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
 4 files changed, 128 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index bb1101757154..34668f6c2dc4 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 1eedcefbf511..9fb39db880a2 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -15,10 +15,12 @@
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
+ * - time   - milliseconds
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
  */
+#define SF_TIME            1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
@@ -55,6 +57,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -176,6 +179,114 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 	return hwm_energy(ddat, energy);
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -494,6 +605,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -532,7 +644,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
 						    ddat,
 						    &hwm_chip_info,
-						    NULL);
+						    hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		mutex_destroy(&hwmon->hwmon_lock);
 		i915->hwmon = NULL;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 3d50b4cda382..af006b08c811 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1879,8 +1879,8 @@
 #define   PKG_MIN_PWR			GENMASK_ULL(30, 16)
 #define   PKG_MAX_PWR			GENMASK_ULL(46, 32)
 #define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
-#define     PKG_MAX_WIN_Y		GENMASK_ULL(54, 53)
-#define     PKG_MAX_WIN_X		GENMASK_ULL(52, 48)
+#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
 
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 18fcfc39ca2f..930cb4d76bbb 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -204,6 +204,10 @@
 
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

[Intel-gfx] [PATCH 7/7] drm/i915/hwmon: Extend power/energy for XEHPSDV

[Badal Nilawar]

From: Dale B Stimson <dale.b.stimson@intel.com>

Extend hwmon power/energy for XEHPSDV especially per gt level energy
usage.

v2: Update to latest HWMON spec (Ashutosh)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   7 +-
 drivers/gpu/drm/i915/gt/intel_gt_regs.h       |   5 +
 drivers/gpu/drm/i915/i915_hwmon.c             | 120 +++++++++++++++++-
 3 files changed, 128 insertions(+), 4 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index 34668f6c2dc4..e69bc43d4c9e 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -65,6 +65,11 @@ What:		/sys/devices/.../hwmon/hwmon<i>/energy1_input
 Date:		June 2022
 KernelVersion:	5.19
 Contact:	dri-devel@lists.freedesktop.org
-Description:	RO. Energy input of device in microjoules.
+Description:	RO. Energy input of device or gt in microjoules.
+
+		For i915 device level hwmon devices (name "i915") this
+		reflects energy input for the entire device. For gt level
+		hwmon devices (name "i915_gtN") this reflects energy input
+		for the gt.
 
 		Only supported for particular Intel i915 graphics platforms.
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_regs.h b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
index 5d4fbda4d326..b7b343cec2da 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_regs.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_regs.h
@@ -1579,4 +1579,9 @@
 
 #define GEN12_SFC_DONE(n)			_MMIO(0x1cc000 + (n) * 0x1000)
 
+#define GT0_PACKAGE_ENERGY_STATUS		_MMIO(0x250004)
+#define GT0_PACKAGE_RAPL_LIMIT			_MMIO(0x250008)
+#define GT0_PACKAGE_POWER_SKU_UNIT		_MMIO(0x250068)
+#define GT0_PLATFORM_ENERGY_STATUS		_MMIO(0x25006c)
+
 #endif /* __INTEL_GT_REGS__ */
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 9fb39db880a2..cb3750b689d3 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -11,6 +11,7 @@
 #include "i915_hwmon.h"
 #include "intel_mchbar_regs.h"
 #include "intel_pcode.h"
+#include "gt/intel_gt.h"
 #include "gt/intel_gt_regs.h"
 
 /*
@@ -20,7 +21,7 @@
  * - curr   - milliamperes
  * - energy - microjoules
  */
-#define SF_TIME            1000
+#define SF_TIME		1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
@@ -36,6 +37,7 @@ struct hwm_reg {
 	i915_reg_t pkg_power_sku;
 	i915_reg_t pkg_rapl_limit;
 	i915_reg_t energy_status_all;
+	i915_reg_t energy_status_tile;
 };
 
 struct hwm_energy_info {
@@ -49,10 +51,12 @@ struct hwm_drvdata {
 	struct device *hwmon_dev;
 	struct hwm_energy_info ei;		/*  Energy info for energy1_input */
 	char name[12];
+	int gt_n;
 };
 
 struct i915_hwmon {
 	struct hwm_drvdata ddat;
+	struct hwm_drvdata ddat_gt[I915_MAX_GT];
 	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
 	struct hwm_reg rg;
 	int scl_shift_power;
@@ -147,7 +151,10 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	i915_reg_t rgaddr;
 	u32 reg_val;
 
-	rgaddr = hwmon->rg.energy_status_all;
+	if (ddat->gt_n >= 0)
+		rgaddr = hwmon->rg.energy_status_tile;
+	else
+		rgaddr = hwmon->rg.energy_status_all;
 
 	if (!i915_mmio_reg_valid(rgaddr))
 		return -EOPNOTSUPP;
@@ -295,6 +302,11 @@ static const struct hwmon_channel_info *hwm_info[] = {
 	NULL
 };
 
+static const struct hwmon_channel_info *hwm_gt_info[] = {
+	HWMON_CHANNEL_INFO(energy, HWMON_E_INPUT),
+	NULL
+};
+
 /* I1 is exposed as power_crit or as curr_crit depending on bit 31 */
 static int hwm_pcode_read_i1(struct drm_i915_private *i915, u32 *uval)
 {
@@ -427,7 +439,10 @@ hwm_energy_is_visible(const struct hwm_drvdata *ddat, u32 attr)
 
 	switch (attr) {
 	case hwmon_energy_input:
-		rgaddr = hwmon->rg.energy_status_all;
+		if (ddat->gt_n >= 0)
+			rgaddr = hwmon->rg.energy_status_tile;
+		else
+			rgaddr = hwmon->rg.energy_status_all;
 		return i915_mmio_reg_valid(rgaddr) ? 0444 : 0;
 	default:
 		return 0;
@@ -562,6 +577,44 @@ static const struct hwmon_chip_info hwm_chip_info = {
 	.info = hwm_info,
 };
 
+static umode_t
+hwm_gt_is_visible(const void *drvdata, enum hwmon_sensor_types type,
+		  u32 attr, int channel)
+{
+	struct hwm_drvdata *ddat = (struct hwm_drvdata *)drvdata;
+
+	switch (type) {
+	case hwmon_energy:
+		return hwm_energy_is_visible(ddat, attr);
+	default:
+		return 0;
+	}
+}
+
+static int
+hwm_gt_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
+	    int channel, long *val)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+
+	switch (type) {
+	case hwmon_energy:
+		return hwm_energy_read(ddat, attr, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static const struct hwmon_ops hwm_gt_ops = {
+	.is_visible = hwm_gt_is_visible,
+	.read = hwm_gt_read,
+};
+
+static const struct hwmon_chip_info hwm_gt_chip_info = {
+	.ops = &hwm_gt_ops,
+	.info = hwm_gt_info,
+};
+
 static void
 hwm_get_preregistration_info(struct drm_i915_private *i915)
 {
@@ -570,7 +623,9 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 	struct hwm_drvdata *ddat = &hwmon->ddat;
 	intel_wakeref_t wakeref;
 	u32 val_sku_unit;
+	struct intel_gt *gt;
 	long energy;
+	int i;
 
 	if (IS_DG1(i915) || IS_DG2(i915)) {
 		hwmon->rg.gt_perf_status = GEN12_RPSTAT1;
@@ -578,12 +633,21 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = PCU_PACKAGE_RAPL_LIMIT;
 		hwmon->rg.energy_status_all = PCU_PACKAGE_ENERGY_STATUS;
+		hwmon->rg.energy_status_tile = INVALID_MMIO_REG;
+	} else if (IS_XEHPSDV(i915)) {
+		hwmon->rg.pkg_power_sku_unit = GT0_PACKAGE_POWER_SKU_UNIT;
+		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
+		hwmon->rg.pkg_rapl_limit = GT0_PACKAGE_RAPL_LIMIT;
+		hwmon->rg.energy_status_all = GT0_PLATFORM_ENERGY_STATUS;
+		hwmon->rg.energy_status_tile = GT0_PACKAGE_ENERGY_STATUS;
+		hwmon->rg.gt_perf_status = INVALID_MMIO_REG;
 	} else {
 		hwmon->rg.gt_perf_status = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku_unit = INVALID_MMIO_REG;
 		hwmon->rg.pkg_power_sku = INVALID_MMIO_REG;
 		hwmon->rg.pkg_rapl_limit = INVALID_MMIO_REG;
 		hwmon->rg.energy_status_all = INVALID_MMIO_REG;
+		hwmon->rg.energy_status_tile = INVALID_MMIO_REG;
 	}
 
 	with_intel_runtime_pm(uncore->rpm, wakeref) {
@@ -613,6 +677,10 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 	 */
 	if (i915_mmio_reg_valid(hwmon->rg.energy_status_all))
 		hwm_energy(ddat, &energy);
+	if (i915_mmio_reg_valid(hwmon->rg.energy_status_tile)) {
+		for_each_gt(gt, i915, i)
+			hwm_energy(&hwmon->ddat_gt[i], &energy);
+	}
 }
 
 void i915_hwmon_register(struct drm_i915_private *i915)
@@ -621,6 +689,10 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	struct i915_hwmon *hwmon;
 	struct device *hwmon_dev;
 	struct hwm_drvdata *ddat;
+	struct hwm_drvdata *ddat_gt;
+	struct intel_gt *gt;
+	const char *ddname;
+	int i;
 
 	/* hwmon is available only for dGfx */
 	if (!IS_DGFX(i915))
@@ -637,6 +709,16 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	ddat->hwmon = hwmon;
 	ddat->uncore = &i915->uncore;
 	snprintf(ddat->name, sizeof(ddat->name), "i915");
+	ddat->gt_n = -1;
+
+	for_each_gt(gt, i915, i) {
+		ddat_gt = hwmon->ddat_gt + i;
+
+		ddat_gt->hwmon = hwmon;
+		ddat_gt->uncore = gt->uncore;
+		snprintf(ddat_gt->name, sizeof(ddat_gt->name), "i915_gt%u", i);
+		ddat_gt->gt_n = i;
+	}
 
 	hwm_get_preregistration_info(i915);
 
@@ -653,18 +735,50 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	}
 
 	ddat->hwmon_dev = hwmon_dev;
+
+	for_each_gt(gt, i915, i) {
+		ddat_gt = hwmon->ddat_gt + i;
+		/*
+		 * Create per-gt directories only if a per-gt attribute is
+		 * visible. Currently this is only energy
+		 */
+		if (!hwm_gt_is_visible(ddat_gt, hwmon_energy, hwmon_energy_input, 0))
+			continue;
+
+		ddname = ddat_gt->name;
+		hwmon_dev = hwmon_device_register_with_info(dev, ddname,
+							    ddat_gt,
+							    &hwm_gt_chip_info,
+							    NULL);
+		if (!IS_ERR(hwmon_dev))
+			ddat_gt->hwmon_dev = hwmon_dev;
+	}
 }
 
 void i915_hwmon_unregister(struct drm_i915_private *i915)
 {
 	struct i915_hwmon *hwmon;
 	struct hwm_drvdata *ddat;
+	struct intel_gt *gt;
+	int i;
 
 	hwmon = fetch_and_zero(&i915->hwmon);
 	if (!hwmon)
 		return;
 
 	ddat = &hwmon->ddat;
+
+	for_each_gt(gt, i915, i) {
+		struct hwm_drvdata *ddat_gt;
+
+		ddat_gt = hwmon->ddat_gt + i;
+
+		if (ddat_gt->hwmon_dev) {
+			hwmon_device_unregister(ddat_gt->hwmon_dev);
+			ddat_gt->hwmon_dev = NULL;
+		}
+	}
+
 	if (ddat->hwmon_dev)
 		hwmon_device_unregister(ddat->hwmon_dev);
 
-- 
2.25.1

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Jani Nikula]

On Fri, 19 Aug 2022, Badal Nilawar <badal.nilawar@intel.com> wrote:
> From: Dale B Stimson <dale.b.stimson@intel.com>
>
> The i915 HWMON module will be used to expose voltage, power and energy
> values for dGfx. Here we set up i915 hwmon infrastructure including i915
> hwmon registration, basic data structures and functions.
>
> v2:
>   - Create HWMON infra patch (Ashutosh)
>   - Fixed review comments (Jani)
>   - Remove "select HWMON" from i915/Kconfig (Jani)
> v3: Use hwm_ prefix for static functions (Ashutosh)
> v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
>     doesn't work if hwmon is compiled as a module (Guenter)

Is this really what we want to do?

In my books, it's a misconfiguration to have CONFIG_HWMON=m with
CONFIG_DRM_I915=y. That's really the problematic combo, not just
CONFIG_HWMON=m, right? Why do we allow it at the kconfig level, and then
have ugly hacks around it at the code level? Especially as
CONFIG_DRM_I915=y should really be thought of as a corner case.

So why not do this in i915 Kconfig:

config DRM_I915
	...
	depends on HWMON || HWMON=n

Which rejects the CONFIG_HWMON=m && CONFIG_DRM_I915=y combo.

>
> Cc: Guenter Roeck <linux@roeck-us.net>
> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> ---
>  drivers/gpu/drm/i915/Makefile      |   3 +
>  drivers/gpu/drm/i915/i915_driver.c |   7 ++
>  drivers/gpu/drm/i915/i915_drv.h    |   2 +
>  drivers/gpu/drm/i915/i915_hwmon.c  | 135 +++++++++++++++++++++++++++++
>  drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
>  5 files changed, 167 insertions(+)
>  create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
>  create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h
>
> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> index 522ef9b4aff3..2b235f747490 100644
> --- a/drivers/gpu/drm/i915/Makefile
> +++ b/drivers/gpu/drm/i915/Makefile
> @@ -208,6 +208,9 @@ i915-y += gt/uc/intel_uc.o \
>  # graphics system controller (GSC) support
>  i915-y += gt/intel_gsc.o
>  
> +# graphics hardware monitoring (HWMON) support
> +i915-$(CONFIG_HWMON) += i915_hwmon.o

Moreover, this builds i915_hwmon.o as part of i915.ko (or kernel as it's
builtin) even if we can't use it!


BR,
Jani.


> +
>  # modesetting core code
>  i915-y += \
>  	display/hsw_ips.o \
> diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
> index deb8a8b76965..62340cd01dde 100644
> --- a/drivers/gpu/drm/i915/i915_driver.c
> +++ b/drivers/gpu/drm/i915/i915_driver.c
> @@ -80,6 +80,7 @@
>  #include "i915_drm_client.h"
>  #include "i915_drv.h"
>  #include "i915_getparam.h"
> +#include "i915_hwmon.h"
>  #include "i915_ioc32.h"
>  #include "i915_ioctl.h"
>  #include "i915_irq.h"
> @@ -736,6 +737,9 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
>  
>  	intel_gt_driver_register(to_gt(dev_priv));
>  
> +#if IS_REACHABLE(CONFIG_HWMON)
> +	i915_hwmon_register(dev_priv);
> +#endif
>  	intel_display_driver_register(dev_priv);
>  
>  	intel_power_domains_enable(dev_priv);
> @@ -762,6 +766,9 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
>  
>  	intel_display_driver_unregister(dev_priv);
>  
> +#if IS_REACHABLE(CONFIG_HWMON)
> +	i915_hwmon_unregister(dev_priv);
> +#endif
>  	intel_gt_driver_unregister(to_gt(dev_priv));
>  
>  	i915_perf_unregister(dev_priv);
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 086bbe8945d6..d437d588dec9 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -705,6 +705,8 @@ struct drm_i915_private {
>  
>  	struct i915_perf perf;
>  
> +	struct i915_hwmon *hwmon;
> +
>  	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
>  	struct intel_gt gt0;
>  
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> new file mode 100644
> index 000000000000..5b80a0f024f0
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -0,0 +1,135 @@
> +// SPDX-License-Identifier: MIT
> +/*
> + * Copyright © 2022 Intel Corporation
> + */
> +
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/types.h>
> +
> +#include "i915_drv.h"
> +#include "i915_hwmon.h"
> +#include "intel_mchbar_regs.h"
> +
> +struct hwm_reg {
> +};
> +
> +struct hwm_drvdata {
> +	struct i915_hwmon *hwmon;
> +	struct intel_uncore *uncore;
> +	struct device *hwmon_dev;
> +	char name[12];
> +};
> +
> +struct i915_hwmon {
> +	struct hwm_drvdata ddat;
> +	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
> +	struct hwm_reg rg;
> +};
> +
> +static const struct hwmon_channel_info *hwm_info[] = {
> +	NULL
> +};
> +
> +static umode_t
> +hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
> +	       u32 attr, int channel)
> +{
> +	switch (type) {
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int
> +hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +	 int channel, long *val)
> +{
> +	switch (type) {
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int
> +hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +	  int channel, long val)
> +{
> +	switch (type) {
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static const struct hwmon_ops hwm_ops = {
> +	.is_visible = hwm_is_visible,
> +	.read = hwm_read,
> +	.write = hwm_write,
> +};
> +
> +static const struct hwmon_chip_info hwm_chip_info = {
> +	.ops = &hwm_ops,
> +	.info = hwm_info,
> +};
> +
> +static void
> +hwm_get_preregistration_info(struct drm_i915_private *i915)
> +{
> +}
> +
> +void i915_hwmon_register(struct drm_i915_private *i915)
> +{
> +	struct device *dev = i915->drm.dev;
> +	struct i915_hwmon *hwmon;
> +	struct device *hwmon_dev;
> +	struct hwm_drvdata *ddat;
> +
> +	/* hwmon is available only for dGfx */
> +	if (!IS_DGFX(i915))
> +		return;
> +
> +	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
> +	if (!hwmon)
> +		return;
> +
> +	i915->hwmon = hwmon;
> +	mutex_init(&hwmon->hwmon_lock);
> +	ddat = &hwmon->ddat;
> +
> +	ddat->hwmon = hwmon;
> +	ddat->uncore = &i915->uncore;
> +	snprintf(ddat->name, sizeof(ddat->name), "i915");
> +
> +	hwm_get_preregistration_info(i915);
> +
> +	/*  hwmon_dev points to device hwmon<i> */
> +	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
> +						    ddat,
> +						    &hwm_chip_info,
> +						    NULL);
> +	if (IS_ERR(hwmon_dev)) {
> +		mutex_destroy(&hwmon->hwmon_lock);
> +		i915->hwmon = NULL;
> +		kfree(hwmon);
> +		return;
> +	}
> +
> +	ddat->hwmon_dev = hwmon_dev;
> +}
> +
> +void i915_hwmon_unregister(struct drm_i915_private *i915)
> +{
> +	struct i915_hwmon *hwmon;
> +	struct hwm_drvdata *ddat;
> +
> +	hwmon = fetch_and_zero(&i915->hwmon);
> +	if (!hwmon)
> +		return;
> +
> +	ddat = &hwmon->ddat;
> +	if (ddat->hwmon_dev)
> +		hwmon_device_unregister(ddat->hwmon_dev);
> +
> +	mutex_destroy(&hwmon->hwmon_lock);
> +	kfree(hwmon);
> +}
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
> new file mode 100644
> index 000000000000..921ae76099d3
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: MIT */
> +
> +/*
> + * Copyright © 2022 Intel Corporation
> + */
> +
> +#ifndef __I915_HWMON_H__
> +#define __I915_HWMON_H__
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +#include "i915_reg.h"
> +
> +struct drm_i915_private;
> +
> +void i915_hwmon_register(struct drm_i915_private *i915);
> +void i915_hwmon_unregister(struct drm_i915_private *i915);
> +
> +#endif /* __I915_HWMON_H__ */

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Jani Nikula]

On Fri, 19 Aug 2022, Badal Nilawar <badal.nilawar@intel.com> wrote:
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
> new file mode 100644
> index 000000000000..921ae76099d3
> --- /dev/null
> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
> @@ -0,0 +1,20 @@
> +/* SPDX-License-Identifier: MIT */
> +
> +/*
> + * Copyright © 2022 Intel Corporation
> + */
> +
> +#ifndef __I915_HWMON_H__
> +#define __I915_HWMON_H__
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +#include "i915_reg.h"

All of the above #includes are unnecessary. Please remove.

BR,
Jani.

> +
> +struct drm_i915_private;
> +
> +void i915_hwmon_register(struct drm_i915_private *i915);
> +void i915_hwmon_unregister(struct drm_i915_private *i915);
> +
> +#endif /* __I915_HWMON_H__ */

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Guenter Roeck]

On Fri, Aug 19, 2022 at 01:35:52PM +0300, Jani Nikula wrote:
> On Fri, 19 Aug 2022, Badal Nilawar <badal.nilawar@intel.com> wrote:
> > From: Dale B Stimson <dale.b.stimson@intel.com>
> >
> > The i915 HWMON module will be used to expose voltage, power and energy
> > values for dGfx. Here we set up i915 hwmon infrastructure including i915
> > hwmon registration, basic data structures and functions.
> >
> > v2:
> >   - Create HWMON infra patch (Ashutosh)
> >   - Fixed review comments (Jani)
> >   - Remove "select HWMON" from i915/Kconfig (Jani)
> > v3: Use hwm_ prefix for static functions (Ashutosh)
> > v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
> >     doesn't work if hwmon is compiled as a module (Guenter)
> 
> Is this really what we want to do?
> 
> In my books, it's a misconfiguration to have CONFIG_HWMON=m with
> CONFIG_DRM_I915=y. That's really the problematic combo, not just
> CONFIG_HWMON=m, right? Why do we allow it at the kconfig level, and then
> have ugly hacks around it at the code level? Especially as
> CONFIG_DRM_I915=y should really be thought of as a corner case.
> 
> So why not do this in i915 Kconfig:
> 
> config DRM_I915
> 	...
> 	depends on HWMON || HWMON=n
> 

Ok with me, but not my call to make. The ifdef should then use
IS_ENABLED(), though.

Guenter

> Which rejects the CONFIG_HWMON=m && CONFIG_DRM_I915=y combo.
> 
> >
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
> > Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> > Signed-off-by: Riana Tauro <riana.tauro@intel.com>
> > Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> > ---
> >  drivers/gpu/drm/i915/Makefile      |   3 +
> >  drivers/gpu/drm/i915/i915_driver.c |   7 ++
> >  drivers/gpu/drm/i915/i915_drv.h    |   2 +
> >  drivers/gpu/drm/i915/i915_hwmon.c  | 135 +++++++++++++++++++++++++++++
> >  drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
> >  5 files changed, 167 insertions(+)
> >  create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
> >  create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h
> >
> > diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
> > index 522ef9b4aff3..2b235f747490 100644
> > --- a/drivers/gpu/drm/i915/Makefile
> > +++ b/drivers/gpu/drm/i915/Makefile
> > @@ -208,6 +208,9 @@ i915-y += gt/uc/intel_uc.o \
> >  # graphics system controller (GSC) support
> >  i915-y += gt/intel_gsc.o
> >  
> > +# graphics hardware monitoring (HWMON) support
> > +i915-$(CONFIG_HWMON) += i915_hwmon.o
> 
> Moreover, this builds i915_hwmon.o as part of i915.ko (or kernel as it's
> builtin) even if we can't use it!
> 
> 
> BR,
> Jani.
> 
> 
> > +
> >  # modesetting core code
> >  i915-y += \
> >  	display/hsw_ips.o \
> > diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
> > index deb8a8b76965..62340cd01dde 100644
> > --- a/drivers/gpu/drm/i915/i915_driver.c
> > +++ b/drivers/gpu/drm/i915/i915_driver.c
> > @@ -80,6 +80,7 @@
> >  #include "i915_drm_client.h"
> >  #include "i915_drv.h"
> >  #include "i915_getparam.h"
> > +#include "i915_hwmon.h"
> >  #include "i915_ioc32.h"
> >  #include "i915_ioctl.h"
> >  #include "i915_irq.h"
> > @@ -736,6 +737,9 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
> >  
> >  	intel_gt_driver_register(to_gt(dev_priv));
> >  
> > +#if IS_REACHABLE(CONFIG_HWMON)
> > +	i915_hwmon_register(dev_priv);
> > +#endif
> >  	intel_display_driver_register(dev_priv);
> >  
> >  	intel_power_domains_enable(dev_priv);
> > @@ -762,6 +766,9 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
> >  
> >  	intel_display_driver_unregister(dev_priv);
> >  
> > +#if IS_REACHABLE(CONFIG_HWMON)
> > +	i915_hwmon_unregister(dev_priv);
> > +#endif
> >  	intel_gt_driver_unregister(to_gt(dev_priv));
> >  
> >  	i915_perf_unregister(dev_priv);
> > diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> > index 086bbe8945d6..d437d588dec9 100644
> > --- a/drivers/gpu/drm/i915/i915_drv.h
> > +++ b/drivers/gpu/drm/i915/i915_drv.h
> > @@ -705,6 +705,8 @@ struct drm_i915_private {
> >  
> >  	struct i915_perf perf;
> >  
> > +	struct i915_hwmon *hwmon;
> > +
> >  	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
> >  	struct intel_gt gt0;
> >  
> > diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> > new file mode 100644
> > index 000000000000..5b80a0f024f0
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> > @@ -0,0 +1,135 @@
> > +// SPDX-License-Identifier: MIT
> > +/*
> > + * Copyright © 2022 Intel Corporation
> > + */
> > +
> > +#include <linux/hwmon.h>
> > +#include <linux/hwmon-sysfs.h>
> > +#include <linux/types.h>
> > +
> > +#include "i915_drv.h"
> > +#include "i915_hwmon.h"
> > +#include "intel_mchbar_regs.h"
> > +
> > +struct hwm_reg {
> > +};
> > +
> > +struct hwm_drvdata {
> > +	struct i915_hwmon *hwmon;
> > +	struct intel_uncore *uncore;
> > +	struct device *hwmon_dev;
> > +	char name[12];
> > +};
> > +
> > +struct i915_hwmon {
> > +	struct hwm_drvdata ddat;
> > +	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
> > +	struct hwm_reg rg;
> > +};
> > +
> > +static const struct hwmon_channel_info *hwm_info[] = {
> > +	NULL
> > +};
> > +
> > +static umode_t
> > +hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
> > +	       u32 attr, int channel)
> > +{
> > +	switch (type) {
> > +	default:
> > +		return 0;
> > +	}
> > +}
> > +
> > +static int
> > +hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> > +	 int channel, long *val)
> > +{
> > +	switch (type) {
> > +	default:
> > +		return -EOPNOTSUPP;
> > +	}
> > +}
> > +
> > +static int
> > +hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> > +	  int channel, long val)
> > +{
> > +	switch (type) {
> > +	default:
> > +		return -EOPNOTSUPP;
> > +	}
> > +}
> > +
> > +static const struct hwmon_ops hwm_ops = {
> > +	.is_visible = hwm_is_visible,
> > +	.read = hwm_read,
> > +	.write = hwm_write,
> > +};
> > +
> > +static const struct hwmon_chip_info hwm_chip_info = {
> > +	.ops = &hwm_ops,
> > +	.info = hwm_info,
> > +};
> > +
> > +static void
> > +hwm_get_preregistration_info(struct drm_i915_private *i915)
> > +{
> > +}
> > +
> > +void i915_hwmon_register(struct drm_i915_private *i915)
> > +{
> > +	struct device *dev = i915->drm.dev;
> > +	struct i915_hwmon *hwmon;
> > +	struct device *hwmon_dev;
> > +	struct hwm_drvdata *ddat;
> > +
> > +	/* hwmon is available only for dGfx */
> > +	if (!IS_DGFX(i915))
> > +		return;
> > +
> > +	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
> > +	if (!hwmon)
> > +		return;
> > +
> > +	i915->hwmon = hwmon;
> > +	mutex_init(&hwmon->hwmon_lock);
> > +	ddat = &hwmon->ddat;
> > +
> > +	ddat->hwmon = hwmon;
> > +	ddat->uncore = &i915->uncore;
> > +	snprintf(ddat->name, sizeof(ddat->name), "i915");
> > +
> > +	hwm_get_preregistration_info(i915);
> > +
> > +	/*  hwmon_dev points to device hwmon<i> */
> > +	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
> > +						    ddat,
> > +						    &hwm_chip_info,
> > +						    NULL);
> > +	if (IS_ERR(hwmon_dev)) {
> > +		mutex_destroy(&hwmon->hwmon_lock);
> > +		i915->hwmon = NULL;
> > +		kfree(hwmon);
> > +		return;
> > +	}
> > +
> > +	ddat->hwmon_dev = hwmon_dev;
> > +}
> > +
> > +void i915_hwmon_unregister(struct drm_i915_private *i915)
> > +{
> > +	struct i915_hwmon *hwmon;
> > +	struct hwm_drvdata *ddat;
> > +
> > +	hwmon = fetch_and_zero(&i915->hwmon);
> > +	if (!hwmon)
> > +		return;
> > +
> > +	ddat = &hwmon->ddat;
> > +	if (ddat->hwmon_dev)
> > +		hwmon_device_unregister(ddat->hwmon_dev);
> > +
> > +	mutex_destroy(&hwmon->hwmon_lock);
> > +	kfree(hwmon);
> > +}
> > diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
> > new file mode 100644
> > index 000000000000..921ae76099d3
> > --- /dev/null
> > +++ b/drivers/gpu/drm/i915/i915_hwmon.h
> > @@ -0,0 +1,20 @@
> > +/* SPDX-License-Identifier: MIT */
> > +
> > +/*
> > + * Copyright © 2022 Intel Corporation
> > + */
> > +
> > +#ifndef __I915_HWMON_H__
> > +#define __I915_HWMON_H__
> > +
> > +#include <linux/device.h>
> > +#include <linux/mutex.h>
> > +#include <linux/types.h>
> > +#include "i915_reg.h"
> > +
> > +struct drm_i915_private;
> > +
> > +void i915_hwmon_register(struct drm_i915_private *i915);
> > +void i915_hwmon_unregister(struct drm_i915_private *i915);
> > +
> > +#endif /* __I915_HWMON_H__ */
> 
> -- 
> Jani Nikula, Intel Open Source Graphics Center

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Nilawar, Badal]

On 19-08-2022 16:05, Jani Nikula wrote:
> On Fri, 19 Aug 2022, Badal Nilawar <badal.nilawar@intel.com> wrote:
>> From: Dale B Stimson <dale.b.stimson@intel.com>
>>
>> The i915 HWMON module will be used to expose voltage, power and energy
>> values for dGfx. Here we set up i915 hwmon infrastructure including i915
>> hwmon registration, basic data structures and functions.
>>
>> v2:
>>    - Create HWMON infra patch (Ashutosh)
>>    - Fixed review comments (Jani)
>>    - Remove "select HWMON" from i915/Kconfig (Jani)
>> v3: Use hwm_ prefix for static functions (Ashutosh)
>> v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
>>      doesn't work if hwmon is compiled as a module (Guenter)
> 
> Is this really what we want to do?
> 
> In my books, it's a misconfiguration to have CONFIG_HWMON=m with
> CONFIG_DRM_I915=y. That's really the problematic combo, not just
> CONFIG_HWMON=m, right? Why do we allow it at the kconfig level, and then
> have ugly hacks around it at the code level? Especially as
> CONFIG_DRM_I915=y should really be thought of as a corner case.
> 
> So why not do this in i915 Kconfig:
> 
> config DRM_I915
> 	...
> 	depends on HWMON || HWMON=n
With this change I am getting recursive dependancy error when I run make 
oldconfig

badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
   HOSTCC  scripts/basic/fixdep
   HOSTCC  scripts/kconfig/conf.o
   HOSTCC  scripts/kconfig/confdata.o
   HOSTCC  scripts/kconfig/expr.o
   LEX     scripts/kconfig/lexer.lex.c
   YACC    scripts/kconfig/parser.tab.[ch]
   HOSTCC  scripts/kconfig/lexer.lex.o
   HOSTCC  scripts/kconfig/menu.o
   HOSTCC  scripts/kconfig/parser.tab.o
   HOSTCC  scripts/kconfig/preprocess.o
   HOSTCC  scripts/kconfig/symbol.o
   HOSTCC  scripts/kconfig/util.o
   HOSTLD  scripts/kconfig/conf
drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
For a resolution refer to Documentation/kbuild/kconfig-language.rst
subsection "Kconfig recursive dependency limitations"

make[1]: *** [scripts/kconfig/Makefile:77: oldconfig] Error 1
make: *** [Makefile:632: oldconfig] Error 2


> 
> Which rejects the CONFIG_HWMON=m && CONFIG_DRM_I915=y combo.
> 
>>
>> Cc: Guenter Roeck <linux@roeck-us.net>
>> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
>> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
>> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
>> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
>> ---
>>   drivers/gpu/drm/i915/Makefile      |   3 +
>>   drivers/gpu/drm/i915/i915_driver.c |   7 ++
>>   drivers/gpu/drm/i915/i915_drv.h    |   2 +
>>   drivers/gpu/drm/i915/i915_hwmon.c  | 135 +++++++++++++++++++++++++++++
>>   drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
>>   5 files changed, 167 insertions(+)
>>   create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
>>   create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h
>>
>> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>> index 522ef9b4aff3..2b235f747490 100644
>> --- a/drivers/gpu/drm/i915/Makefile
>> +++ b/drivers/gpu/drm/i915/Makefile
>> @@ -208,6 +208,9 @@ i915-y += gt/uc/intel_uc.o \
>>   # graphics system controller (GSC) support
>>   i915-y += gt/intel_gsc.o
>>   
>> +# graphics hardware monitoring (HWMON) support
>> +i915-$(CONFIG_HWMON) += i915_hwmon.o
> 
> Moreover, this builds i915_hwmon.o as part of i915.ko (or kernel as it's
> builtin) even if we can't use it!
For CONFIG_HWMON=m && CONFIG_DRM_I915=y combo i915_hwmon.o didn't get 
build. It is only getting build for below combos
CONFIG_HWMON=m && CONFIG_DRM_I915=y
CONFIG_HWMON=m && CONFIG_DRM_I915=m
CONFIG_HWMON=y && CONFIG_DRM_I915=m

Regards,
Badal
> 
> 
> BR,
> Jani.
> 
> 
>> +
>>   # modesetting core code
>>   i915-y += \
>>   	display/hsw_ips.o \
>> diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
>> index deb8a8b76965..62340cd01dde 100644
>> --- a/drivers/gpu/drm/i915/i915_driver.c
>> +++ b/drivers/gpu/drm/i915/i915_driver.c
>> @@ -80,6 +80,7 @@
>>   #include "i915_drm_client.h"
>>   #include "i915_drv.h"
>>   #include "i915_getparam.h"
>> +#include "i915_hwmon.h"
>>   #include "i915_ioc32.h"
>>   #include "i915_ioctl.h"
>>   #include "i915_irq.h"
>> @@ -736,6 +737,9 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
>>   
>>   	intel_gt_driver_register(to_gt(dev_priv));
>>   
>> +#if IS_REACHABLE(CONFIG_HWMON)
>> +	i915_hwmon_register(dev_priv);
>> +#endif
>>   	intel_display_driver_register(dev_priv);
>>   
>>   	intel_power_domains_enable(dev_priv);
>> @@ -762,6 +766,9 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
>>   
>>   	intel_display_driver_unregister(dev_priv);
>>   
>> +#if IS_REACHABLE(CONFIG_HWMON)
>> +	i915_hwmon_unregister(dev_priv);
>> +#endif
>>   	intel_gt_driver_unregister(to_gt(dev_priv));
>>   
>>   	i915_perf_unregister(dev_priv);
>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>> index 086bbe8945d6..d437d588dec9 100644
>> --- a/drivers/gpu/drm/i915/i915_drv.h
>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>> @@ -705,6 +705,8 @@ struct drm_i915_private {
>>   
>>   	struct i915_perf perf;
>>   
>> +	struct i915_hwmon *hwmon;
>> +
>>   	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
>>   	struct intel_gt gt0;
>>   
>> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
>> new file mode 100644
>> index 000000000000..5b80a0f024f0
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
>> @@ -0,0 +1,135 @@
>> +// SPDX-License-Identifier: MIT
>> +/*
>> + * Copyright © 2022 Intel Corporation
>> + */
>> +
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>> +#include <linux/types.h>
>> +
>> +#include "i915_drv.h"
>> +#include "i915_hwmon.h"
>> +#include "intel_mchbar_regs.h"
>> +
>> +struct hwm_reg {
>> +};
>> +
>> +struct hwm_drvdata {
>> +	struct i915_hwmon *hwmon;
>> +	struct intel_uncore *uncore;
>> +	struct device *hwmon_dev;
>> +	char name[12];
>> +};
>> +
>> +struct i915_hwmon {
>> +	struct hwm_drvdata ddat;
>> +	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
>> +	struct hwm_reg rg;
>> +};
>> +
>> +static const struct hwmon_channel_info *hwm_info[] = {
>> +	NULL
>> +};
>> +
>> +static umode_t
>> +hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>> +	       u32 attr, int channel)
>> +{
>> +	switch (type) {
>> +	default:
>> +		return 0;
>> +	}
>> +}
>> +
>> +static int
>> +hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>> +	 int channel, long *val)
>> +{
>> +	switch (type) {
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
>> +}
>> +
>> +static int
>> +hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>> +	  int channel, long val)
>> +{
>> +	switch (type) {
>> +	default:
>> +		return -EOPNOTSUPP;
>> +	}
>> +}
>> +
>> +static const struct hwmon_ops hwm_ops = {
>> +	.is_visible = hwm_is_visible,
>> +	.read = hwm_read,
>> +	.write = hwm_write,
>> +};
>> +
>> +static const struct hwmon_chip_info hwm_chip_info = {
>> +	.ops = &hwm_ops,
>> +	.info = hwm_info,
>> +};
>> +
>> +static void
>> +hwm_get_preregistration_info(struct drm_i915_private *i915)
>> +{
>> +}
>> +
>> +void i915_hwmon_register(struct drm_i915_private *i915)
>> +{
>> +	struct device *dev = i915->drm.dev;
>> +	struct i915_hwmon *hwmon;
>> +	struct device *hwmon_dev;
>> +	struct hwm_drvdata *ddat;
>> +
>> +	/* hwmon is available only for dGfx */
>> +	if (!IS_DGFX(i915))
>> +		return;
>> +
>> +	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
>> +	if (!hwmon)
>> +		return;
>> +
>> +	i915->hwmon = hwmon;
>> +	mutex_init(&hwmon->hwmon_lock);
>> +	ddat = &hwmon->ddat;
>> +
>> +	ddat->hwmon = hwmon;
>> +	ddat->uncore = &i915->uncore;
>> +	snprintf(ddat->name, sizeof(ddat->name), "i915");
>> +
>> +	hwm_get_preregistration_info(i915);
>> +
>> +	/*  hwmon_dev points to device hwmon<i> */
>> +	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
>> +						    ddat,
>> +						    &hwm_chip_info,
>> +						    NULL);
>> +	if (IS_ERR(hwmon_dev)) {
>> +		mutex_destroy(&hwmon->hwmon_lock);
>> +		i915->hwmon = NULL;
>> +		kfree(hwmon);
>> +		return;
>> +	}
>> +
>> +	ddat->hwmon_dev = hwmon_dev;
>> +}
>> +
>> +void i915_hwmon_unregister(struct drm_i915_private *i915)
>> +{
>> +	struct i915_hwmon *hwmon;
>> +	struct hwm_drvdata *ddat;
>> +
>> +	hwmon = fetch_and_zero(&i915->hwmon);
>> +	if (!hwmon)
>> +		return;
>> +
>> +	ddat = &hwmon->ddat;
>> +	if (ddat->hwmon_dev)
>> +		hwmon_device_unregister(ddat->hwmon_dev);
>> +
>> +	mutex_destroy(&hwmon->hwmon_lock);
>> +	kfree(hwmon);
>> +}
>> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
>> new file mode 100644
>> index 000000000000..921ae76099d3
>> --- /dev/null
>> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
>> @@ -0,0 +1,20 @@
>> +/* SPDX-License-Identifier: MIT */
>> +
>> +/*
>> + * Copyright © 2022 Intel Corporation
>> + */
>> +
>> +#ifndef __I915_HWMON_H__
>> +#define __I915_HWMON_H__
>> +
>> +#include <linux/device.h>
>> +#include <linux/mutex.h>
>> +#include <linux/types.h>
>> +#include "i915_reg.h"
>> +
>> +struct drm_i915_private;
>> +
>> +void i915_hwmon_register(struct drm_i915_private *i915);
>> +void i915_hwmon_unregister(struct drm_i915_private *i915);
>> +
>> +#endif /* __I915_HWMON_H__ */
> 

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Jani Nikula]

On Tue, 23 Aug 2022, "Nilawar, Badal" <badal.nilawar@intel.com> wrote:
> On 19-08-2022 16:05, Jani Nikula wrote:
>> On Fri, 19 Aug 2022, Badal Nilawar <badal.nilawar@intel.com> wrote:
>>> From: Dale B Stimson <dale.b.stimson@intel.com>
>>>
>>> The i915 HWMON module will be used to expose voltage, power and energy
>>> values for dGfx. Here we set up i915 hwmon infrastructure including i915
>>> hwmon registration, basic data structures and functions.
>>>
>>> v2:
>>>    - Create HWMON infra patch (Ashutosh)
>>>    - Fixed review comments (Jani)
>>>    - Remove "select HWMON" from i915/Kconfig (Jani)
>>> v3: Use hwm_ prefix for static functions (Ashutosh)
>>> v4: s/#ifdef CONFIG_HWMON/#if IS_REACHABLE(CONFIG_HWMON)/ since the former
>>>      doesn't work if hwmon is compiled as a module (Guenter)
>> 
>> Is this really what we want to do?
>> 
>> In my books, it's a misconfiguration to have CONFIG_HWMON=m with
>> CONFIG_DRM_I915=y. That's really the problematic combo, not just
>> CONFIG_HWMON=m, right? Why do we allow it at the kconfig level, and then
>> have ugly hacks around it at the code level? Especially as
>> CONFIG_DRM_I915=y should really be thought of as a corner case.
>> 
>> So why not do this in i915 Kconfig:
>> 
>> config DRM_I915
>> 	...
>> 	depends on HWMON || HWMON=n
> With this change I am getting recursive dependancy error when I run make 
> oldconfig
>
> badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
>    HOSTCC  scripts/basic/fixdep
>    HOSTCC  scripts/kconfig/conf.o
>    HOSTCC  scripts/kconfig/confdata.o
>    HOSTCC  scripts/kconfig/expr.o
>    LEX     scripts/kconfig/lexer.lex.c
>    YACC    scripts/kconfig/parser.tab.[ch]
>    HOSTCC  scripts/kconfig/lexer.lex.o
>    HOSTCC  scripts/kconfig/menu.o
>    HOSTCC  scripts/kconfig/parser.tab.o
>    HOSTCC  scripts/kconfig/preprocess.o
>    HOSTCC  scripts/kconfig/symbol.o
>    HOSTCC  scripts/kconfig/util.o
>    HOSTLD  scripts/kconfig/conf
> drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
> drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
> drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
> drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
> drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
> For a resolution refer to Documentation/kbuild/kconfig-language.rst
> subsection "Kconfig recursive dependency limitations"

*sigh*

  Note:
	select should be used with care. select will force
	a symbol to a value without visiting the dependencies.
	By abusing select you are able to select a symbol FOO even
	if FOO depends on BAR that is not set.
	In general use select only for non-visible symbols
	(no prompts anywhere) and for symbols with no dependencies.
	That will limit the usefulness but on the other hand avoid
	the illegal configurations all over.

One day someone's going to need to fix menuconfig to first start
complaining about selecting stuff that shouldn't be selected, and then
eventually refusing to select stuff that shouldn't be selected. This is
an endless whack-a-mole, preventing people from adding reasonable
dependencies.

BR,
Jani.


>
> make[1]: *** [scripts/kconfig/Makefile:77: oldconfig] Error 1
> make: *** [Makefile:632: oldconfig] Error 2
>
>
>> 
>> Which rejects the CONFIG_HWMON=m && CONFIG_DRM_I915=y combo.
>> 
>>>
>>> Cc: Guenter Roeck <linux@roeck-us.net>
>>> Signed-off-by: Dale B Stimson <dale.b.stimson@intel.com>
>>> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
>>> Signed-off-by: Riana Tauro <riana.tauro@intel.com>
>>> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
>>> ---
>>>   drivers/gpu/drm/i915/Makefile      |   3 +
>>>   drivers/gpu/drm/i915/i915_driver.c |   7 ++
>>>   drivers/gpu/drm/i915/i915_drv.h    |   2 +
>>>   drivers/gpu/drm/i915/i915_hwmon.c  | 135 +++++++++++++++++++++++++++++
>>>   drivers/gpu/drm/i915/i915_hwmon.h  |  20 +++++
>>>   5 files changed, 167 insertions(+)
>>>   create mode 100644 drivers/gpu/drm/i915/i915_hwmon.c
>>>   create mode 100644 drivers/gpu/drm/i915/i915_hwmon.h
>>>
>>> diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>>> index 522ef9b4aff3..2b235f747490 100644
>>> --- a/drivers/gpu/drm/i915/Makefile
>>> +++ b/drivers/gpu/drm/i915/Makefile
>>> @@ -208,6 +208,9 @@ i915-y += gt/uc/intel_uc.o \
>>>   # graphics system controller (GSC) support
>>>   i915-y += gt/intel_gsc.o
>>>   
>>> +# graphics hardware monitoring (HWMON) support
>>> +i915-$(CONFIG_HWMON) += i915_hwmon.o
>> 
>> Moreover, this builds i915_hwmon.o as part of i915.ko (or kernel as it's
>> builtin) even if we can't use it!
> For CONFIG_HWMON=m && CONFIG_DRM_I915=y combo i915_hwmon.o didn't get 
> build. It is only getting build for below combos
> CONFIG_HWMON=m && CONFIG_DRM_I915=y
> CONFIG_HWMON=m && CONFIG_DRM_I915=m
> CONFIG_HWMON=y && CONFIG_DRM_I915=m
>
> Regards,
> Badal
>> 
>> 
>> BR,
>> Jani.
>> 
>> 
>>> +
>>>   # modesetting core code
>>>   i915-y += \
>>>   	display/hsw_ips.o \
>>> diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c
>>> index deb8a8b76965..62340cd01dde 100644
>>> --- a/drivers/gpu/drm/i915/i915_driver.c
>>> +++ b/drivers/gpu/drm/i915/i915_driver.c
>>> @@ -80,6 +80,7 @@
>>>   #include "i915_drm_client.h"
>>>   #include "i915_drv.h"
>>>   #include "i915_getparam.h"
>>> +#include "i915_hwmon.h"
>>>   #include "i915_ioc32.h"
>>>   #include "i915_ioctl.h"
>>>   #include "i915_irq.h"
>>> @@ -736,6 +737,9 @@ static void i915_driver_register(struct drm_i915_private *dev_priv)
>>>   
>>>   	intel_gt_driver_register(to_gt(dev_priv));
>>>   
>>> +#if IS_REACHABLE(CONFIG_HWMON)
>>> +	i915_hwmon_register(dev_priv);
>>> +#endif
>>>   	intel_display_driver_register(dev_priv);
>>>   
>>>   	intel_power_domains_enable(dev_priv);
>>> @@ -762,6 +766,9 @@ static void i915_driver_unregister(struct drm_i915_private *dev_priv)
>>>   
>>>   	intel_display_driver_unregister(dev_priv);
>>>   
>>> +#if IS_REACHABLE(CONFIG_HWMON)
>>> +	i915_hwmon_unregister(dev_priv);
>>> +#endif
>>>   	intel_gt_driver_unregister(to_gt(dev_priv));
>>>   
>>>   	i915_perf_unregister(dev_priv);
>>> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
>>> index 086bbe8945d6..d437d588dec9 100644
>>> --- a/drivers/gpu/drm/i915/i915_drv.h
>>> +++ b/drivers/gpu/drm/i915/i915_drv.h
>>> @@ -705,6 +705,8 @@ struct drm_i915_private {
>>>   
>>>   	struct i915_perf perf;
>>>   
>>> +	struct i915_hwmon *hwmon;
>>> +
>>>   	/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
>>>   	struct intel_gt gt0;
>>>   
>>> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
>>> new file mode 100644
>>> index 000000000000..5b80a0f024f0
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
>>> @@ -0,0 +1,135 @@
>>> +// SPDX-License-Identifier: MIT
>>> +/*
>>> + * Copyright © 2022 Intel Corporation
>>> + */
>>> +
>>> +#include <linux/hwmon.h>
>>> +#include <linux/hwmon-sysfs.h>
>>> +#include <linux/types.h>
>>> +
>>> +#include "i915_drv.h"
>>> +#include "i915_hwmon.h"
>>> +#include "intel_mchbar_regs.h"
>>> +
>>> +struct hwm_reg {
>>> +};
>>> +
>>> +struct hwm_drvdata {
>>> +	struct i915_hwmon *hwmon;
>>> +	struct intel_uncore *uncore;
>>> +	struct device *hwmon_dev;
>>> +	char name[12];
>>> +};
>>> +
>>> +struct i915_hwmon {
>>> +	struct hwm_drvdata ddat;
>>> +	struct mutex hwmon_lock;		/* counter overflow logic and rmw */
>>> +	struct hwm_reg rg;
>>> +};
>>> +
>>> +static const struct hwmon_channel_info *hwm_info[] = {
>>> +	NULL
>>> +};
>>> +
>>> +static umode_t
>>> +hwm_is_visible(const void *drvdata, enum hwmon_sensor_types type,
>>> +	       u32 attr, int channel)
>>> +{
>>> +	switch (type) {
>>> +	default:
>>> +		return 0;
>>> +	}
>>> +}
>>> +
>>> +static int
>>> +hwm_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>>> +	 int channel, long *val)
>>> +{
>>> +	switch (type) {
>>> +	default:
>>> +		return -EOPNOTSUPP;
>>> +	}
>>> +}
>>> +
>>> +static int
>>> +hwm_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
>>> +	  int channel, long val)
>>> +{
>>> +	switch (type) {
>>> +	default:
>>> +		return -EOPNOTSUPP;
>>> +	}
>>> +}
>>> +
>>> +static const struct hwmon_ops hwm_ops = {
>>> +	.is_visible = hwm_is_visible,
>>> +	.read = hwm_read,
>>> +	.write = hwm_write,
>>> +};
>>> +
>>> +static const struct hwmon_chip_info hwm_chip_info = {
>>> +	.ops = &hwm_ops,
>>> +	.info = hwm_info,
>>> +};
>>> +
>>> +static void
>>> +hwm_get_preregistration_info(struct drm_i915_private *i915)
>>> +{
>>> +}
>>> +
>>> +void i915_hwmon_register(struct drm_i915_private *i915)
>>> +{
>>> +	struct device *dev = i915->drm.dev;
>>> +	struct i915_hwmon *hwmon;
>>> +	struct device *hwmon_dev;
>>> +	struct hwm_drvdata *ddat;
>>> +
>>> +	/* hwmon is available only for dGfx */
>>> +	if (!IS_DGFX(i915))
>>> +		return;
>>> +
>>> +	hwmon = kzalloc(sizeof(*hwmon), GFP_KERNEL);
>>> +	if (!hwmon)
>>> +		return;
>>> +
>>> +	i915->hwmon = hwmon;
>>> +	mutex_init(&hwmon->hwmon_lock);
>>> +	ddat = &hwmon->ddat;
>>> +
>>> +	ddat->hwmon = hwmon;
>>> +	ddat->uncore = &i915->uncore;
>>> +	snprintf(ddat->name, sizeof(ddat->name), "i915");
>>> +
>>> +	hwm_get_preregistration_info(i915);
>>> +
>>> +	/*  hwmon_dev points to device hwmon<i> */
>>> +	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
>>> +						    ddat,
>>> +						    &hwm_chip_info,
>>> +						    NULL);
>>> +	if (IS_ERR(hwmon_dev)) {
>>> +		mutex_destroy(&hwmon->hwmon_lock);
>>> +		i915->hwmon = NULL;
>>> +		kfree(hwmon);
>>> +		return;
>>> +	}
>>> +
>>> +	ddat->hwmon_dev = hwmon_dev;
>>> +}
>>> +
>>> +void i915_hwmon_unregister(struct drm_i915_private *i915)
>>> +{
>>> +	struct i915_hwmon *hwmon;
>>> +	struct hwm_drvdata *ddat;
>>> +
>>> +	hwmon = fetch_and_zero(&i915->hwmon);
>>> +	if (!hwmon)
>>> +		return;
>>> +
>>> +	ddat = &hwmon->ddat;
>>> +	if (ddat->hwmon_dev)
>>> +		hwmon_device_unregister(ddat->hwmon_dev);
>>> +
>>> +	mutex_destroy(&hwmon->hwmon_lock);
>>> +	kfree(hwmon);
>>> +}
>>> diff --git a/drivers/gpu/drm/i915/i915_hwmon.h b/drivers/gpu/drm/i915/i915_hwmon.h
>>> new file mode 100644
>>> index 000000000000..921ae76099d3
>>> --- /dev/null
>>> +++ b/drivers/gpu/drm/i915/i915_hwmon.h
>>> @@ -0,0 +1,20 @@
>>> +/* SPDX-License-Identifier: MIT */
>>> +
>>> +/*
>>> + * Copyright © 2022 Intel Corporation
>>> + */
>>> +
>>> +#ifndef __I915_HWMON_H__
>>> +#define __I915_HWMON_H__
>>> +
>>> +#include <linux/device.h>
>>> +#include <linux/mutex.h>
>>> +#include <linux/types.h>
>>> +#include "i915_reg.h"
>>> +
>>> +struct drm_i915_private;
>>> +
>>> +void i915_hwmon_register(struct drm_i915_private *i915);
>>> +void i915_hwmon_unregister(struct drm_i915_private *i915);
>>> +
>>> +#endif /* __I915_HWMON_H__ */
>> 

-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Guenter Roeck]

On Tue, Aug 23, 2022 at 12:46:14PM +0300, Jani Nikula wrote:
[ ... ]
> >> 
> >> So why not do this in i915 Kconfig:
> >> 
> >> config DRM_I915
> >> 	...
> >> 	depends on HWMON || HWMON=n
> > With this change I am getting recursive dependancy error when I run make 
> > oldconfig
> >
> > badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
> >    HOSTCC  scripts/basic/fixdep
> >    HOSTCC  scripts/kconfig/conf.o
> >    HOSTCC  scripts/kconfig/confdata.o
> >    HOSTCC  scripts/kconfig/expr.o
> >    LEX     scripts/kconfig/lexer.lex.c
> >    YACC    scripts/kconfig/parser.tab.[ch]
> >    HOSTCC  scripts/kconfig/lexer.lex.o
> >    HOSTCC  scripts/kconfig/menu.o
> >    HOSTCC  scripts/kconfig/parser.tab.o
> >    HOSTCC  scripts/kconfig/preprocess.o
> >    HOSTCC  scripts/kconfig/symbol.o
> >    HOSTCC  scripts/kconfig/util.o
> >    HOSTLD  scripts/kconfig/conf
> > drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
> > drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
> > drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
> > drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
> > drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
> > For a resolution refer to Documentation/kbuild/kconfig-language.rst
> > subsection "Kconfig recursive dependency limitations"
> 
> *sigh*
> 
>   Note:
> 	select should be used with care. select will force
> 	a symbol to a value without visiting the dependencies.
> 	By abusing select you are able to select a symbol FOO even
> 	if FOO depends on BAR that is not set.
> 	In general use select only for non-visible symbols
> 	(no prompts anywhere) and for symbols with no dependencies.
> 	That will limit the usefulness but on the other hand avoid
> 	the illegal configurations all over.
> 
Agreed. HWMON should not be selected anywhere. Unfortunately it is, and
drm is no exception. It is selected by DRM_RADEON and DRM_AMDGPU.
Maybe just select it in DRM_I915 as well after all; in practice it won't
make a difference.

Guenter

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Jani Nikula]

On Tue, 23 Aug 2022, Guenter Roeck <linux@roeck-us.net> wrote:
> On Tue, Aug 23, 2022 at 12:46:14PM +0300, Jani Nikula wrote:
> [ ... ]
>> >> 
>> >> So why not do this in i915 Kconfig:
>> >> 
>> >> config DRM_I915
>> >> 	...
>> >> 	depends on HWMON || HWMON=n
>> > With this change I am getting recursive dependancy error when I run make 
>> > oldconfig
>> >
>> > badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
>> >    HOSTCC  scripts/basic/fixdep
>> >    HOSTCC  scripts/kconfig/conf.o
>> >    HOSTCC  scripts/kconfig/confdata.o
>> >    HOSTCC  scripts/kconfig/expr.o
>> >    LEX     scripts/kconfig/lexer.lex.c
>> >    YACC    scripts/kconfig/parser.tab.[ch]
>> >    HOSTCC  scripts/kconfig/lexer.lex.o
>> >    HOSTCC  scripts/kconfig/menu.o
>> >    HOSTCC  scripts/kconfig/parser.tab.o
>> >    HOSTCC  scripts/kconfig/preprocess.o
>> >    HOSTCC  scripts/kconfig/symbol.o
>> >    HOSTCC  scripts/kconfig/util.o
>> >    HOSTLD  scripts/kconfig/conf
>> > drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
>> > drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
>> > drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
>> > drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
>> > drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
>> > For a resolution refer to Documentation/kbuild/kconfig-language.rst
>> > subsection "Kconfig recursive dependency limitations"
>> 
>> *sigh*
>> 
>>   Note:
>> 	select should be used with care. select will force
>> 	a symbol to a value without visiting the dependencies.
>> 	By abusing select you are able to select a symbol FOO even
>> 	if FOO depends on BAR that is not set.
>> 	In general use select only for non-visible symbols
>> 	(no prompts anywhere) and for symbols with no dependencies.
>> 	That will limit the usefulness but on the other hand avoid
>> 	the illegal configurations all over.
>> 
> Agreed. HWMON should not be selected anywhere. Unfortunately it is, and
> drm is no exception. It is selected by DRM_RADEON and DRM_AMDGPU.
> Maybe just select it in DRM_I915 as well after all; in practice it won't
> make a difference.

And I guess everyone just does what I'm about to do now, throw my hands
up in the air in disgust and resignation. :p

BR,
Jani.



-- 
Jani Nikula, Intel Open Source Graphics Center

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Nilawar, Badal]

On 23-08-2022 19:05, Jani Nikula wrote:
> On Tue, 23 Aug 2022, Guenter Roeck <linux@roeck-us.net> wrote:
>> On Tue, Aug 23, 2022 at 12:46:14PM +0300, Jani Nikula wrote:
>> [ ... ]
>>>>>
>>>>> So why not do this in i915 Kconfig:
>>>>>
>>>>> config DRM_I915
>>>>> 	...
>>>>> 	depends on HWMON || HWMON=n
>>>> With this change I am getting recursive dependancy error when I run make
>>>> oldconfig
>>>>
>>>> badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
>>>>     HOSTCC  scripts/basic/fixdep
>>>>     HOSTCC  scripts/kconfig/conf.o
>>>>     HOSTCC  scripts/kconfig/confdata.o
>>>>     HOSTCC  scripts/kconfig/expr.o
>>>>     LEX     scripts/kconfig/lexer.lex.c
>>>>     YACC    scripts/kconfig/parser.tab.[ch]
>>>>     HOSTCC  scripts/kconfig/lexer.lex.o
>>>>     HOSTCC  scripts/kconfig/menu.o
>>>>     HOSTCC  scripts/kconfig/parser.tab.o
>>>>     HOSTCC  scripts/kconfig/preprocess.o
>>>>     HOSTCC  scripts/kconfig/symbol.o
>>>>     HOSTCC  scripts/kconfig/util.o
>>>>     HOSTLD  scripts/kconfig/conf
>>>> drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
>>>> drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
>>>> drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
>>>> drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
>>>> drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
>>>> For a resolution refer to Documentation/kbuild/kconfig-language.rst
>>>> subsection "Kconfig recursive dependency limitations"
>>>
>>> *sigh*
>>>
>>>    Note:
>>> 	select should be used with care. select will force
>>> 	a symbol to a value without visiting the dependencies.
>>> 	By abusing select you are able to select a symbol FOO even
>>> 	if FOO depends on BAR that is not set.
>>> 	In general use select only for non-visible symbols
>>> 	(no prompts anywhere) and for symbols with no dependencies.
>>> 	That will limit the usefulness but on the other hand avoid
>>> 	the illegal configurations all over.
>>>
>> Agreed. HWMON should not be selected anywhere. Unfortunately it is, and
>> drm is no exception. It is selected by DRM_RADEON and DRM_AMDGPU.
>> Maybe just select it in DRM_I915 as well after all; in practice it won't
>> make a difference.
> 
> And I guess everyone just does what I'm about to do now, throw my hands
> up in the air in disgust and resignation. :p
How about sticking to existing approach only. In my previous response I 
mentioned that for combo which we want to reject CONFIG_HWMON=m && 
CONFIG_DRM_I915=y combo i915_hwmon.o is not getting build.
It is only getting build for below combos
CONFIG_HWMON=m && CONFIG_DRM_I915=y
CONFIG_HWMON=m && CONFIG_DRM_I915=m
CONFIG_HWMON=y && CONFIG_DRM_I915=m
Regards,
Badal
> 
> BR,
> Jani.
> 
> 
> 

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Jani Nikula]

On Tue, 23 Aug 2022, "Nilawar, Badal" <badal.nilawar@intel.com> wrote:
> On 23-08-2022 19:05, Jani Nikula wrote:
>> On Tue, 23 Aug 2022, Guenter Roeck <linux@roeck-us.net> wrote:
>>> On Tue, Aug 23, 2022 at 12:46:14PM +0300, Jani Nikula wrote:
>>> [ ... ]
>>>>>>
>>>>>> So why not do this in i915 Kconfig:
>>>>>>
>>>>>> config DRM_I915
>>>>>> 	...
>>>>>> 	depends on HWMON || HWMON=n
>>>>> With this change I am getting recursive dependancy error when I run make
>>>>> oldconfig
>>>>>
>>>>> badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
>>>>>     HOSTCC  scripts/basic/fixdep
>>>>>     HOSTCC  scripts/kconfig/conf.o
>>>>>     HOSTCC  scripts/kconfig/confdata.o
>>>>>     HOSTCC  scripts/kconfig/expr.o
>>>>>     LEX     scripts/kconfig/lexer.lex.c
>>>>>     YACC    scripts/kconfig/parser.tab.[ch]
>>>>>     HOSTCC  scripts/kconfig/lexer.lex.o
>>>>>     HOSTCC  scripts/kconfig/menu.o
>>>>>     HOSTCC  scripts/kconfig/parser.tab.o
>>>>>     HOSTCC  scripts/kconfig/preprocess.o
>>>>>     HOSTCC  scripts/kconfig/symbol.o
>>>>>     HOSTCC  scripts/kconfig/util.o
>>>>>     HOSTLD  scripts/kconfig/conf
>>>>> drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
>>>>> drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
>>>>> drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
>>>>> drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
>>>>> drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
>>>>> For a resolution refer to Documentation/kbuild/kconfig-language.rst
>>>>> subsection "Kconfig recursive dependency limitations"
>>>>
>>>> *sigh*
>>>>
>>>>    Note:
>>>> 	select should be used with care. select will force
>>>> 	a symbol to a value without visiting the dependencies.
>>>> 	By abusing select you are able to select a symbol FOO even
>>>> 	if FOO depends on BAR that is not set.
>>>> 	In general use select only for non-visible symbols
>>>> 	(no prompts anywhere) and for symbols with no dependencies.
>>>> 	That will limit the usefulness but on the other hand avoid
>>>> 	the illegal configurations all over.
>>>>
>>> Agreed. HWMON should not be selected anywhere. Unfortunately it is, and
>>> drm is no exception. It is selected by DRM_RADEON and DRM_AMDGPU.
>>> Maybe just select it in DRM_I915 as well after all; in practice it won't
>>> make a difference.
>> 
>> And I guess everyone just does what I'm about to do now, throw my hands
>> up in the air in disgust and resignation. :p
> How about sticking to existing approach only. In my previous response I 
> mentioned that for combo which we want to reject CONFIG_HWMON=m && 
> CONFIG_DRM_I915=y combo i915_hwmon.o is not getting build.
> It is only getting build for below combos
> CONFIG_HWMON=m && CONFIG_DRM_I915=y
> CONFIG_HWMON=m && CONFIG_DRM_I915=m
> CONFIG_HWMON=y && CONFIG_DRM_I915=m

Then please hide the IS_REACHABLE() within i915_hwmon.h and add stubs as
is customary. Let's not clutter high level driver code with some random
#if directives.

BR,
Jani.


> Regards,
> Badal
>> 
>> BR,
>> Jani.
>> 
>> 
>> 

-- 
Jani Nikula, Intel Open Source Graphics Center

[Intel-gfx] ✗ Fi.CI.BUILD: failure for drm/i915: Add HWMON support (rev4)

[Patchwork]

== Series Details ==

Series: drm/i915: Add HWMON support (rev4)
URL   : https://patchwork.freedesktop.org/series/104278/
State : failure

== Summary ==

Error: patch https://patchwork.freedesktop.org/api/1.0/series/104278/revisions/4/mbox/ not applied
Applying: drm/i915/hwmon: Add HWMON infrastructure
Applying: drm/i915/hwmon: Add HWMON current voltage support
Applying: drm/i915/hwmon: Power PL1 limit and TDP setting
Using index info to reconstruct a base tree...
M	drivers/gpu/drm/i915/i915_reg.h
M	drivers/gpu/drm/i915/intel_mchbar_regs.h
Falling back to patching base and 3-way merge...
Auto-merging drivers/gpu/drm/i915/intel_mchbar_regs.h
CONFLICT (content): Merge conflict in drivers/gpu/drm/i915/intel_mchbar_regs.h
Auto-merging drivers/gpu/drm/i915/i915_reg.h
error: Failed to merge in the changes.
hint: Use 'git am --show-current-patch=diff' to see the failed patch
Patch failed at 0003 drm/i915/hwmon: Power PL1 limit and TDP setting
When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".

Re: [Intel-gfx] [PATCH 1/7] drm/i915/hwmon: Add HWMON infrastructure

[Nilawar, Badal]

On 23-08-2022 20:11, Jani Nikula wrote:
> On Tue, 23 Aug 2022, "Nilawar, Badal" <badal.nilawar@intel.com> wrote:
>> On 23-08-2022 19:05, Jani Nikula wrote:
>>> On Tue, 23 Aug 2022, Guenter Roeck <linux@roeck-us.net> wrote:
>>>> On Tue, Aug 23, 2022 at 12:46:14PM +0300, Jani Nikula wrote:
>>>> [ ... ]
>>>>>>>
>>>>>>> So why not do this in i915 Kconfig:
>>>>>>>
>>>>>>> config DRM_I915
>>>>>>> 	...
>>>>>>> 	depends on HWMON || HWMON=n
>>>>>> With this change I am getting recursive dependancy error when I run make
>>>>>> oldconfig
>>>>>>
>>>>>> badal@bnilawar-desk1:~/workspace/wp3/drm-tip$ make oldconfig
>>>>>>      HOSTCC  scripts/basic/fixdep
>>>>>>      HOSTCC  scripts/kconfig/conf.o
>>>>>>      HOSTCC  scripts/kconfig/confdata.o
>>>>>>      HOSTCC  scripts/kconfig/expr.o
>>>>>>      LEX     scripts/kconfig/lexer.lex.c
>>>>>>      YACC    scripts/kconfig/parser.tab.[ch]
>>>>>>      HOSTCC  scripts/kconfig/lexer.lex.o
>>>>>>      HOSTCC  scripts/kconfig/menu.o
>>>>>>      HOSTCC  scripts/kconfig/parser.tab.o
>>>>>>      HOSTCC  scripts/kconfig/preprocess.o
>>>>>>      HOSTCC  scripts/kconfig/symbol.o
>>>>>>      HOSTCC  scripts/kconfig/util.o
>>>>>>      HOSTLD  scripts/kconfig/conf
>>>>>> drivers/gpu/drm/i915/Kconfig:2:error: recursive dependency detected!
>>>>>> drivers/gpu/drm/i915/Kconfig:2: symbol DRM_I915 depends on HWMON
>>>>>> drivers/hwmon/Kconfig:6:        symbol HWMON is selected by EEEPC_LAPTOP
>>>>>> drivers/platform/x86/Kconfig:332:       symbol EEEPC_LAPTOP depends on INPUT
>>>>>> drivers/input/Kconfig:8:        symbol INPUT is selected by DRM_I915
>>>>>> For a resolution refer to Documentation/kbuild/kconfig-language.rst
>>>>>> subsection "Kconfig recursive dependency limitations"
>>>>>
>>>>> *sigh*
>>>>>
>>>>>     Note:
>>>>> 	select should be used with care. select will force
>>>>> 	a symbol to a value without visiting the dependencies.
>>>>> 	By abusing select you are able to select a symbol FOO even
>>>>> 	if FOO depends on BAR that is not set.
>>>>> 	In general use select only for non-visible symbols
>>>>> 	(no prompts anywhere) and for symbols with no dependencies.
>>>>> 	That will limit the usefulness but on the other hand avoid
>>>>> 	the illegal configurations all over.
>>>>>
>>>> Agreed. HWMON should not be selected anywhere. Unfortunately it is, and
>>>> drm is no exception. It is selected by DRM_RADEON and DRM_AMDGPU.
>>>> Maybe just select it in DRM_I915 as well after all; in practice it won't
>>>> make a difference.
>>>
>>> And I guess everyone just does what I'm about to do now, throw my hands
>>> up in the air in disgust and resignation. :p
>> How about sticking to existing approach only. In my previous response I
>> mentioned that for combo which we want to reject CONFIG_HWMON=m &&
>> CONFIG_DRM_I915=y combo i915_hwmon.o is not getting build.
>> It is only getting build for below combos
>> CONFIG_HWMON=m && CONFIG_DRM_I915=y
>> CONFIG_HWMON=m && CONFIG_DRM_I915=m
>> CONFIG_HWMON=y && CONFIG_DRM_I915=m
> 
> Then please hide the IS_REACHABLE() within i915_hwmon.h and add stubs as
> is customary. Let's not clutter high level driver code with some random
> #if directives.

Thanks, I will resolve this and float the new series.

Regards,
Badal
> 
> BR,
> Jani.
> 
> 
>> Regards,
>> Badal
>>>
>>> BR,
>>> Jani.
>>>
>>>
>>>
> 

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Dixit, Ashutosh]

On Mon, 03 Oct 2022 14:32:36 -0700, Andi Shyti wrote:
>

Hi Andi,

> > diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> > index f9d6d3b08bba..19b9fe3ef237 100644
> > --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> > +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> > @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
> >
> >		Only supported for particular Intel i915 graphics platforms.
> >
> > +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> > +Date:		February 2023
> > +KernelVersion:	6.2
> > +Contact:	dri-devel@lists.freedesktop.org
>
> same question here.
>
> > +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> > +		milliseconds over which sustained power is averaged.
> > +
> > +		Only supported for particular Intel i915 graphics platforms.
> > +
> >  What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
> >  Date:		February 2023
> >  KernelVersion:	6.2
> > diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> > index 2394fa789793..641143956c45 100644
> > --- a/drivers/gpu/drm/i915/i915_hwmon.c
> > +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> > @@ -20,11 +20,13 @@
> >   * - power  - microwatts
> >   * - curr   - milliamperes
> >   * - energy - microjoules
> > + * - time   - milliseconds
> >   */
> >  #define SF_VOLTAGE	1000
> >  #define SF_POWER	1000000
> >  #define SF_CURR		1000
> >  #define SF_ENERGY	1000000
> > +#define SF_TIME		1000
> >
> >  struct hwm_reg {
> >	i915_reg_t gt_perf_status;
> > @@ -53,6 +55,7 @@ struct i915_hwmon {
> >	struct hwm_reg rg;
> >	int scl_shift_power;
> >	int scl_shift_energy;
> > +	int scl_shift_time;
> >  };
> >
> >  static void
> > @@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
> >	return 0;
> >  }
> >
> > +static ssize_t
> > +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> > +			     char *buf)
> > +{
> > +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> > +	struct i915_hwmon *hwmon = ddat->hwmon;
> > +	intel_wakeref_t wakeref;
> > +	u32 r, x, y, x_w = 2; /* 2 bits */
> > +	u64 tau4, out;
> > +
> > +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> > +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> > +
> > +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> > +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> > +	/*
> > +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> > +	 *     = (4 | x) << (y - 2)
> > +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> > +	 * However because y can be < 2, we compute
> > +	 *     tau4 = (4 | x) << y
> > +	 * but add 2 when doing the final right shift to account for units
> > +	 */
> > +	tau4 = ((1 << x_w) | x) << y;
> > +	/* val in hwmon interface units (millisec) */
> > +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> > +
> > +	return sysfs_emit(buf, "%llu\n", out);
> > +}
> > +
> > +static ssize_t
> > +hwm_power1_max_interval_store(struct device *dev,
> > +			      struct device_attribute *attr,
> > +			      const char *buf, size_t count)
> > +{
> > +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> > +	struct i915_hwmon *hwmon = ddat->hwmon;
> > +	long val, max_win, ret;
>
> you have some type mismatch here:
>
>  - val should be unsigned long
>  - max_win should be u64
>  - ret should be int

Thanks, fixed in v9.

>
> > +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> > +	u64 tau4, r;
> > +
> > +#define PKG_MAX_WIN_DEFAULT 0x12ull
>
> could you please add a comment here?

Done.

> > +
> > +	ret = kstrtoul(buf, 0, &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/*
> > +	 * val must be < max in hwmon interface units. The steps below are
> > +	 * explained in i915_power1_max_interval_show()
> > +	 */
> > +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> > +
> > +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> > +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> > +	tau4 = ((1 << x_w) | x) << y;
> > +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> > +
> > +	if (val > max_win)
> > +		return -EINVAL;
> > +
> > +	/* val in hw units */
> > +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> > +	/* Convert to 1.x * power(2,y) */
> > +	if (!val)
> > +		return -EINVAL;
> > +	y = ilog2(val);
> > +	/* x = (val - (1 << y)) >> (y - 2); */
>
> some leftover

No, it's a comment describing what's happening in the line below. I've left
it as is for now. Can remove it if you think it's unnecessary.

>
> > +	x = (val - (1ul << y)) << x_w >> y;
> > +
> > +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> > +
> > +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> > +					    PKG_PWR_LIM_1_TIME, rxy);
> > +	return count;
> > +}
> > +
> > +static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
> > +			  hwm_power1_max_interval_show,
> > +			  hwm_power1_max_interval_store, 0);
> > +
> > +static struct attribute *hwm_attributes[] = {
> > +	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
> > +	NULL
> > +};
> > +
> > +static umode_t hwm_attributes_visible(struct kobject *kobj,
> > +				      struct attribute *attr, int index)
> > +{
> > +	struct device *dev = kobj_to_dev(kobj);
> > +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> > +	struct i915_hwmon *hwmon = ddat->hwmon;
> > +
> > +	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
> > +		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
> > +	else
> > +		return 0;
>
> please remove the else

Done.

Thanks.
--
Ashutosh

> > +}
> > +
> > +static const struct attribute_group hwm_attrgroup = {
> > +	.attrs = hwm_attributes,
> > +	.is_visible = hwm_attributes_visible,
> > +};
> > +
> > +static const struct attribute_group *hwm_groups[] = {
> > +	&hwm_attrgroup,
> > +	NULL
> > +};
> > +
> >  static const struct hwmon_channel_info *hwm_info[] = {
> >	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
> >	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
> > @@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
> >
> >	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
> >	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
> > +	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
> >
> >	/*
> >	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
> > @@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
> >	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
> >							 ddat,
> >							 &hwm_chip_info,
> > -							 NULL);
> > +							 hwm_groups);
> >	if (IS_ERR(hwmon_dev)) {
> >		i915->hwmon = NULL;
> >		return;
> > diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> > index bd42fb66e297..64aa1e9be463 100644
> > --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> > +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> > @@ -194,6 +194,9 @@
> >   */
> >  #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
> >  #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
> > +#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
> > +#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
> > +#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
> >
> >  #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
> >  #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
> > @@ -212,6 +215,10 @@
> >  #define   RPE_MASK				REG_GENMASK(15, 8)
> >  #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
> >  #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> > +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> > +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> > +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> > +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
> >
> >  /* snb MCH registers for priority tuning */
> >  #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
> > --
> > 2.25.1

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Ashutosh Dixit]

Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
    is valid the field PKG_WIN_MAX is not populated. So it is
    decided to stick to default value of PKG_WIN_MAX (Ashutosh)
v6: Change contact to intel-gfx (Rodrigo)
    Fixed variable types in hwm_power1_max_interval_store (Andi)
    Documented PKG_MAX_WIN_DEFAULT (Andi)
    Removed else in hwm_attributes_visible (Andi)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 119 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
 3 files changed, 134 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index a7a6512fcc8ca..9dc5ff14107bb 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	intel-gfx@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 2b24a7a711400..58f80380e5427 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -159,6 +162,119 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	mutex_unlock(&hwmon->hwmon_lock);
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r, max_win;
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * Max HW supported tau in '1.x * power(2,y)' format, x = 0, y = 0x12
+	 * The hwmon->scl_shift_time default of 0xa results in a max tau of 256 seconds
+	 */
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+
+	return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -471,6 +587,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -509,7 +626,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
 							 ddat,
 							 &hwm_chip_info,
-							 NULL);
+							 hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		i915->hwmon = NULL;
 		return;
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index decd411c2cdd0..f93e9af43ac35 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -194,6 +194,9 @@
  */
 #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
 #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
@@ -212,6 +215,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.38.0

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Andi Shyti]

Hi Badal,

> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index f9d6d3b08bba..19b9fe3ef237 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
>  
>  		Only supported for particular Intel i915 graphics platforms.
>  
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> +Date:		February 2023
> +KernelVersion:	6.2
> +Contact:	dri-devel@lists.freedesktop.org

same question here.

> +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> +		milliseconds over which sustained power is averaged.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>  What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
>  Date:		February 2023
>  KernelVersion:	6.2
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 2394fa789793..641143956c45 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -20,11 +20,13 @@
>   * - power  - microwatts
>   * - curr   - milliamperes
>   * - energy - microjoules
> + * - time   - milliseconds
>   */
>  #define SF_VOLTAGE	1000
>  #define SF_POWER	1000000
>  #define SF_CURR		1000
>  #define SF_ENERGY	1000000
> +#define SF_TIME		1000
>  
>  struct hwm_reg {
>  	i915_reg_t gt_perf_status;
> @@ -53,6 +55,7 @@ struct i915_hwmon {
>  	struct hwm_reg rg;
>  	int scl_shift_power;
>  	int scl_shift_energy;
> +	int scl_shift_time;
>  };
>  
>  static void
> @@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>  	return 0;
>  }
>  
> +static ssize_t
> +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r, x, y, x_w = 2; /* 2 bits */
> +	u64 tau4, out;
> +
> +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> +
> +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> +	/*
> +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> +	 *     = (4 | x) << (y - 2)
> +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> +	 * However because y can be < 2, we compute
> +	 *     tau4 = (4 | x) << y
> +	 * but add 2 when doing the final right shift to account for units
> +	 */
> +	tau4 = ((1 << x_w) | x) << y;
> +	/* val in hwmon interface units (millisec) */
> +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	return sysfs_emit(buf, "%llu\n", out);
> +}
> +
> +static ssize_t
> +hwm_power1_max_interval_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	long val, max_win, ret;

you have some type mismatch here:

 - val should be unsigned long
 - max_win should be u64
 - ret should be int 

> +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> +	u64 tau4, r;
> +
> +#define PKG_MAX_WIN_DEFAULT 0x12ull

could you please add a comment here?

> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * val must be < max in hwmon interface units. The steps below are
> +	 * explained in i915_power1_max_interval_show()
> +	 */
> +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> +
> +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> +	tau4 = ((1 << x_w) | x) << y;
> +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	if (val > max_win)
> +		return -EINVAL;
> +
> +	/* val in hw units */
> +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> +	/* Convert to 1.x * power(2,y) */
> +	if (!val)
> +		return -EINVAL;
> +	y = ilog2(val);
> +	/* x = (val - (1 << y)) >> (y - 2); */

some leftover

> +	x = (val - (1ul << y)) << x_w >> y;
> +
> +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> +
> +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> +					    PKG_PWR_LIM_1_TIME, rxy);
> +	return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
> +			  hwm_power1_max_interval_show,
> +			  hwm_power1_max_interval_store, 0);
> +
> +static struct attribute *hwm_attributes[] = {
> +	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
> +	NULL
> +};
> +
> +static umode_t hwm_attributes_visible(struct kobject *kobj,
> +				      struct attribute *attr, int index)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +
> +	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
> +		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
> +	else
> +		return 0;

please remove the else

Andi

> +}
> +
> +static const struct attribute_group hwm_attrgroup = {
> +	.attrs = hwm_attributes,
> +	.is_visible = hwm_attributes_visible,
> +};
> +
> +static const struct attribute_group *hwm_groups[] = {
> +	&hwm_attrgroup,
> +	NULL
> +};
> +
>  static const struct hwmon_channel_info *hwm_info[] = {
>  	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
>  	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
> @@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
>  
>  	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
>  	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
> +	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
>  
>  	/*
>  	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
> @@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
>  	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
>  							 ddat,
>  							 &hwm_chip_info,
> -							 NULL);
> +							 hwm_groups);
>  	if (IS_ERR(hwmon_dev)) {
>  		i915->hwmon = NULL;
>  		return;
> diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> index bd42fb66e297..64aa1e9be463 100644
> --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> @@ -194,6 +194,9 @@
>   */
>  #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
>  #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
> +#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
> +#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
> +#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
>  
>  #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
>  #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
> @@ -212,6 +215,10 @@
>  #define   RPE_MASK				REG_GENMASK(15, 8)
>  #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
>  #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
>  
>  /* snb MCH registers for priority tuning */
>  #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
> -- 
> 2.25.1

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Gupta, Anshuman]

On 9/27/2022 11:20 AM, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose power1_max_interval, that is the tau corresponding to PL1, as a
> custom hwmon attribute. Some bit manipulation is needed because of the
> format of PKG_PWR_LIM_1_TIME in
> GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
> 
> v2: Update date and kernel version in Documentation (Badal)
> v3: Cleaned up hwm_power1_max_interval_store() (Badal)
> v4:
>    - Fixed review comments (Anshuman)
>    - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
>      pkg_power_sku when it is valid (Ashutosh)
>    - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
> v5: On some of the DGFX setups it is seen that although pkg_power_sku
>      is valid the field PKG_WIN_MAX is not populated. So it is
>      decided to stick to default value of PKG_WIN_MAX (Ashutosh)
> 
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
LGTM,
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 115 +++++++++++++++++-
>   drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
>   3 files changed, 130 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index f9d6d3b08bba..19b9fe3ef237 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> +Date:		February 2023
> +KernelVersion:	6.2
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> +		milliseconds over which sustained power is averaged.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
>   Date:		February 2023
>   KernelVersion:	6.2
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 2394fa789793..641143956c45 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -20,11 +20,13 @@
>    * - power  - microwatts
>    * - curr   - milliamperes
>    * - energy - microjoules
> + * - time   - milliseconds
>    */
>   #define SF_VOLTAGE	1000
>   #define SF_POWER	1000000
>   #define SF_CURR		1000
>   #define SF_ENERGY	1000000
> +#define SF_TIME		1000
>   
>   struct hwm_reg {
>   	i915_reg_t gt_perf_status;
> @@ -53,6 +55,7 @@ struct i915_hwmon {
>   	struct hwm_reg rg;
>   	int scl_shift_power;
>   	int scl_shift_energy;
> +	int scl_shift_time;
>   };
>   
>   static void
> @@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>   	return 0;
>   }
>   
> +static ssize_t
> +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r, x, y, x_w = 2; /* 2 bits */
> +	u64 tau4, out;
> +
> +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> +
> +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> +	/*
> +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> +	 *     = (4 | x) << (y - 2)
> +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> +	 * However because y can be < 2, we compute
> +	 *     tau4 = (4 | x) << y
> +	 * but add 2 when doing the final right shift to account for units
> +	 */
> +	tau4 = ((1 << x_w) | x) << y;
> +	/* val in hwmon interface units (millisec) */
> +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	return sysfs_emit(buf, "%llu\n", out);
> +}
> +
> +static ssize_t
> +hwm_power1_max_interval_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	long val, max_win, ret;
> +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> +	u64 tau4, r;
> +
> +#define PKG_MAX_WIN_DEFAULT 0x12ull
> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * val must be < max in hwmon interface units. The steps below are
> +	 * explained in i915_power1_max_interval_show()
> +	 */
> +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> +
> +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> +	tau4 = ((1 << x_w) | x) << y;
> +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	if (val > max_win)
> +		return -EINVAL;
> +
> +	/* val in hw units */
> +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> +	/* Convert to 1.x * power(2,y) */
> +	if (!val)
> +		return -EINVAL;
> +	y = ilog2(val);
> +	/* x = (val - (1 << y)) >> (y - 2); */
> +	x = (val - (1ul << y)) << x_w >> y;
> +
> +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> +
> +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> +					    PKG_PWR_LIM_1_TIME, rxy);
> +	return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
> +			  hwm_power1_max_interval_show,
> +			  hwm_power1_max_interval_store, 0);
> +
> +static struct attribute *hwm_attributes[] = {
> +	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
> +	NULL
> +};
> +
> +static umode_t hwm_attributes_visible(struct kobject *kobj,
> +				      struct attribute *attr, int index)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +
> +	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
> +		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
> +	else
> +		return 0;
> +}
> +
> +static const struct attribute_group hwm_attrgroup = {
> +	.attrs = hwm_attributes,
> +	.is_visible = hwm_attributes_visible,
> +};
> +
> +static const struct attribute_group *hwm_groups[] = {
> +	&hwm_attrgroup,
> +	NULL
> +};
> +
>   static const struct hwmon_channel_info *hwm_info[] = {
>   	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
>   	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
> @@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
>   
>   	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
>   	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
> +	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
>   
>   	/*
>   	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
> @@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
>   	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
>   							 ddat,
>   							 &hwm_chip_info,
> -							 NULL);
> +							 hwm_groups);
>   	if (IS_ERR(hwmon_dev)) {
>   		i915->hwmon = NULL;
>   		return;
> diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> index bd42fb66e297..64aa1e9be463 100644
> --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> @@ -194,6 +194,9 @@
>    */
>   #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
>   #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
> +#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
> +#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
> +#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
>   
>   #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
>   #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
> @@ -212,6 +215,10 @@
>   #define   RPE_MASK				REG_GENMASK(15, 8)
>   #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
>   #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
>   
>   /* snb MCH registers for priority tuning */
>   #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Gupta, Anshuman]

On 9/26/2022 11:22 PM, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose power1_max_interval, that is the tau corresponding to PL1, as a
> custom hwmon attribute. Some bit manipulation is needed because of the
> format of PKG_PWR_LIM_1_TIME in
> GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
> 
> v2: Update date and kernel version in Documentation (Badal)
> v3: Cleaned up hwm_power1_max_interval_store() (Badal)
> v4:
>    - Fixed review comments (Anshuman)
>    - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
>      pkg_power_sku when it is valid (Ashutosh)
>    - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
> v5: On some of the DGFX setups it is seen that although pkg_power_sku
>      is valid the field PKG_WIN_MAX is not populated. So it is
>      decided to stick to default value of PKG_WIN_MAX (Ashutosh)
> 
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
LGTM
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 115 +++++++++++++++++-
>   drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
>   3 files changed, 130 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index f9d6d3b08bba..19b9fe3ef237 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> +Date:		February 2023
> +KernelVersion:	6.2
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> +		milliseconds over which sustained power is averaged.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
>   Date:		February 2023
>   KernelVersion:	6.2
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index 2394fa789793..641143956c45 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -20,11 +20,13 @@
>    * - power  - microwatts
>    * - curr   - milliamperes
>    * - energy - microjoules
> + * - time   - milliseconds
>    */
>   #define SF_VOLTAGE	1000
>   #define SF_POWER	1000000
>   #define SF_CURR		1000
>   #define SF_ENERGY	1000000
> +#define SF_TIME		1000
>   
>   struct hwm_reg {
>   	i915_reg_t gt_perf_status;
> @@ -53,6 +55,7 @@ struct i915_hwmon {
>   	struct hwm_reg rg;
>   	int scl_shift_power;
>   	int scl_shift_energy;
> +	int scl_shift_time;
>   };
>   
>   static void
> @@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>   	return 0;
>   }
>   
> +static ssize_t
> +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r, x, y, x_w = 2; /* 2 bits */
> +	u64 tau4, out;
> +
> +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> +
> +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> +	/*
> +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> +	 *     = (4 | x) << (y - 2)
> +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> +	 * However because y can be < 2, we compute
> +	 *     tau4 = (4 | x) << y
> +	 * but add 2 when doing the final right shift to account for units
> +	 */
> +	tau4 = ((1 << x_w) | x) << y;
> +	/* val in hwmon interface units (millisec) */
> +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	return sysfs_emit(buf, "%llu\n", out);
> +}
> +
> +static ssize_t
> +hwm_power1_max_interval_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	long val, max_win, ret;
> +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> +	u64 tau4, r;
> +
> +#define PKG_MAX_WIN_DEFAULT 0x12ull
> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * val must be < max in hwmon interface units. The steps below are
> +	 * explained in i915_power1_max_interval_show()
> +	 */
> +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> +
> +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> +	tau4 = ((1 << x_w) | x) << y;
> +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	if (val > max_win)
> +		return -EINVAL;
> +
> +	/* val in hw units */
> +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> +	/* Convert to 1.x * power(2,y) */
> +	if (!val)
> +		return -EINVAL;
> +	y = ilog2(val);
> +	/* x = (val - (1 << y)) >> (y - 2); */
> +	x = (val - (1ul << y)) << x_w >> y;
> +
> +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> +
> +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> +					    PKG_PWR_LIM_1_TIME, rxy);
> +	return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
> +			  hwm_power1_max_interval_show,
> +			  hwm_power1_max_interval_store, 0);
> +
> +static struct attribute *hwm_attributes[] = {
> +	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
> +	NULL
> +};
> +
> +static umode_t hwm_attributes_visible(struct kobject *kobj,
> +				      struct attribute *attr, int index)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +
> +	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
> +		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
> +	else
> +		return 0;
> +}
> +
> +static const struct attribute_group hwm_attrgroup = {
> +	.attrs = hwm_attributes,
> +	.is_visible = hwm_attributes_visible,
> +};
> +
> +static const struct attribute_group *hwm_groups[] = {
> +	&hwm_attrgroup,
> +	NULL
> +};
> +
>   static const struct hwmon_channel_info *hwm_info[] = {
>   	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
>   	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
> @@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
>   
>   	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
>   	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
> +	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
>   
>   	/*
>   	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
> @@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
>   	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
>   							 ddat,
>   							 &hwm_chip_info,
> -							 NULL);
> +							 hwm_groups);
>   	if (IS_ERR(hwmon_dev)) {
>   		i915->hwmon = NULL;
>   		return;
> diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> index bd42fb66e297..64aa1e9be463 100644
> --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> @@ -194,6 +194,9 @@
>    */
>   #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
>   #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
> +#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
> +#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
> +#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
>   
>   #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
>   #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
> @@ -212,6 +215,10 @@
>   #define   RPE_MASK				REG_GENMASK(15, 8)
>   #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
>   #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
>   
>   /* snb MCH registers for priority tuning */
>   #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
    is valid the field PKG_WIN_MAX is not populated. So it is
    decided to stick to default value of PKG_WIN_MAX (Ashutosh)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 115 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
 3 files changed, 130 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index f9d6d3b08bba..19b9fe3ef237 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 2394fa789793..641143956c45 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	return 0;
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
 							 ddat,
 							 &hwm_chip_info,
-							 NULL);
+							 hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		i915->hwmon = NULL;
 		return;
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index bd42fb66e297..64aa1e9be463 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -194,6 +194,9 @@
  */
 #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
 #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
@@ -212,6 +215,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1, as a
custom hwmon attribute. Some bit manipulation is needed because of the
format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)
v5: On some of the DGFX setups it is seen that although pkg_power_sku
    is valid the field PKG_WIN_MAX is not populated. So it is
    decided to stick to default value of PKG_WIN_MAX (Ashutosh)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 115 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 ++
 3 files changed, 130 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index f9d6d3b08bba..19b9fe3ef237 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index 2394fa789793..641143956c45 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -161,6 +164,115 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	return 0;
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -472,6 +584,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -510,7 +623,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = devm_hwmon_device_register_with_info(dev, ddat->name,
 							 ddat,
 							 &hwm_chip_info,
-							 NULL);
+							 hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		i915->hwmon = NULL;
 		return;
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index bd42fb66e297..64aa1e9be463 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -194,6 +194,9 @@
  */
 #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
 #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
@@ -212,6 +215,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Dixit, Ashutosh]

On Fri, 23 Sep 2022 12:56:42 -0700, Badal Nilawar wrote:
>
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
>
> Expose power1_max_interval, that is the tau corresponding to PL1.

I think let's change the above sentence to: "Expose power1_max_interval,
that is the tau corresponding to PL1, as a custom hwmon attribute".

This is the only custom attribute we are exposing so better to mention this
in the commit message I think.

Thanks.
--
Ashutosh

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)
v4:
  - Fixed review comments (Anshuman)
  - In hwm_power1_max_interval_store() get PKG_MAX_WIN from
    pkg_power_sku when it is valid (Ashutosh)
  - KernelVersion: 6.2, Date: February 2023 in doc (Tvrtko)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 120 +++++++++++++++++-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   7 +
 3 files changed, 135 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index f9d6d3b08bba..19b9fe3ef237 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		February 2023
+KernelVersion:	6.2
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		February 2023
 KernelVersion:	6.2
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index f743ac5c59c4..b95f54d274be 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -161,6 +164,120 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	return 0;
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku))
+		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+			r = intel_uncore_read64(ddat->uncore, hwmon->rg.pkg_power_sku);
+	else
+		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -472,6 +589,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -510,7 +628,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
 						    ddat,
 						    &hwm_chip_info,
-						    NULL);
+						    hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		i915->hwmon = NULL;
 		return;
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index bd42fb66e297..64aa1e9be463 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -194,6 +194,9 @@
  */
 #define PCU_PACKAGE_POWER_SKU			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5930)
 #define   PKG_PKG_TDP				GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN				GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X			GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y			GENMASK_ULL(52, 48)
 
 #define PCU_PACKAGE_POWER_SKU_UNIT		_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5938)
 #define   PKG_PWR_UNIT				REG_GENMASK(3, 0)
@@ -212,6 +215,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Dixit, Ashutosh]

On Thu, 22 Sep 2022 19:51:45 -0700, Dixit, Ashutosh wrote:
>
> On Thu, 22 Sep 2022 00:13:00 -0700, Gupta, Anshuman wrote:
> >
>
> Hi Anshuman,
>
> > > +static ssize_t
> > > +hwm_power1_max_interval_store(struct device *dev,
> > > +			      struct device_attribute *attr,
> > > +			      const char *buf, size_t count)
> > > +{
> > > +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> > > +	struct i915_hwmon *hwmon = ddat->hwmon;
> > > +	long val, max_win, ret;
> > > +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> > > +	u64 tau4, r;
> > > +
> > > +#define PKG_MAX_WIN_DEFAULT 0x12ull
> > > +
> > > +	ret = kstrtoul(buf, 0, &val);
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	/*
> > > +	 * val must be < max in hwmon interface units. The steps below are
> > > +	 * explained in i915_power1_max_interval_show()
> > > +	 */
> > > +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> >
> > AFAIU we need to read r from PACKAGE_POWER_SKU reg untill unless it has
> > some known issue?
>
> The platform on which I tried had an incorrect value (that is why I didn't
> read it from PACKAGE_POWER_SKU) but let me investigate it some more for
> other platforms and get back.

I checked, the value is correct on DG1/DG2 which have a valid
PACKAGE_POWER_SKU (XEHPSDV does not have a valid
PACKAGE_POWER_SKU). Therefore the one line above should be replaced with
the code below:

	if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku))
		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
			r = intel_uncore_read64(ddat->uncore, hwmon->rg.pkg_power_sku);
	else
		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);

> > > +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> > > +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> > > +	tau4 = ((1 << x_w) | x) << y;
> > > +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> > > +
> > > +	if (val > max_win)
> > > +		return -EINVAL;
> > > +
> > > +	/* val in hw units */
> > > +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> > > +	/* Convert to 1.x * power(2,y) */
> > > +	if (!val)
> > > +		return -EINVAL;
> > > +	y = ilog2(val);
> > > +	/* x = (val - (1 << y)) >> (y - 2); */
> > > +	x = (val - (1ul << y)) << x_w >> y;
> > > +
> > > +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> > > +
> > > +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> > > +					    PKG_PWR_LIM_1_TIME, rxy);
> > > +	return count;
> > > +}
> > > +
> > /snip
> > >	if (IS_ERR(hwmon_dev)) {
> > >		mutex_destroy(&hwmon->hwmon_lock);
> > >		i915->hwmon = NULL;
> > > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > > index 956e5298ef1e..68e7cc85dc53 100644
> > > --- a/drivers/gpu/drm/i915/i915_reg.h
> > > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > > @@ -1811,6 +1811,9 @@
> > >    * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
> > >    */
> > >   #define   PKG_PKG_TDP			GENMASK_ULL(14, 0)
> > > +#define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
> > > +#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
> > > +#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
> > These GENMASK fields needs a reg definition.
>
> Yes this is the same _PACKAGE_POWER_SKU register so should get fixed when
> we add it in Patch 3.

Looks like PCU_PACKAGE_POWER_SKU for DG1/DG2 will need to be declared in
intel_mchbar_regs.h so these fields will need to also move there (in
Patch 3).

Thanks.
--
Ashutosh

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Dixit, Ashutosh]

On Thu, 22 Sep 2022 00:13:00 -0700, Gupta, Anshuman wrote:
>

Hi Anshuman,

> > +static ssize_t
> > +hwm_power1_max_interval_store(struct device *dev,
> > +			      struct device_attribute *attr,
> > +			      const char *buf, size_t count)
> > +{
> > +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> > +	struct i915_hwmon *hwmon = ddat->hwmon;
> > +	long val, max_win, ret;
> > +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> > +	u64 tau4, r;
> > +
> > +#define PKG_MAX_WIN_DEFAULT 0x12ull
> > +
> > +	ret = kstrtoul(buf, 0, &val);
> > +	if (ret)
> > +		return ret;
> > +
> > +	/*
> > +	 * val must be < max in hwmon interface units. The steps below are
> > +	 * explained in i915_power1_max_interval_show()
> > +	 */
> > +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
>
> AFAIU we need to read r from PACKAGE_POWER_SKU reg untill unless it has
> some known issue?

The platform on which I tried had an incorrect value (that is why I didn't
read it from PACKAGE_POWER_SKU) but let me investigate it some more for
other platforms and get back.

> > +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> > +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> > +	tau4 = ((1 << x_w) | x) << y;
> > +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> > +
> > +	if (val > max_win)
> > +		return -EINVAL;
> > +
> > +	/* val in hw units */
> > +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> > +	/* Convert to 1.x * power(2,y) */
> > +	if (!val)
> > +		return -EINVAL;
> > +	y = ilog2(val);
> > +	/* x = (val - (1 << y)) >> (y - 2); */
> > +	x = (val - (1ul << y)) << x_w >> y;
> > +
> > +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> > +
> > +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> > +					    PKG_PWR_LIM_1_TIME, rxy);
> > +	return count;
> > +}
> > +
> /snip
> >	if (IS_ERR(hwmon_dev)) {
> >		mutex_destroy(&hwmon->hwmon_lock);
> >		i915->hwmon = NULL;
> > diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> > index 956e5298ef1e..68e7cc85dc53 100644
> > --- a/drivers/gpu/drm/i915/i915_reg.h
> > +++ b/drivers/gpu/drm/i915/i915_reg.h
> > @@ -1811,6 +1811,9 @@
> >    * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
> >    */
> >   #define   PKG_PKG_TDP			GENMASK_ULL(14, 0)
> > +#define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
> > +#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
> > +#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
> These GENMASK fields needs a reg definition.

Yes this is the same _PACKAGE_POWER_SKU register so should get fixed when
we add it in Patch 3.

Thanks.
--
Ashutosh

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Gupta, Anshuman]

On 9/16/2022 8:30 PM, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
> manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
> GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
> 
> v2: Update date and kernel version in Documentation (Badal)
> v3: Cleaned up hwm_power1_max_interval_store() (Badal)
> 
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 114 +++++++++++++++++-
>   drivers/gpu/drm/i915/i915_reg.h               |   3 +
>   drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
>   4 files changed, 129 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index cc70596fff44..7995a885c9d6 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> +Date:		September 2022
> +KernelVersion:	6
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> +		milliseconds over which sustained power is averaged.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
>   Date:		September 2022
>   KernelVersion:	6
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index bd9ba312c474..7d85a81bc39b 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -20,11 +20,13 @@
>    * - power  - microwatts
>    * - curr   - milliamperes
>    * - energy - microjoules
> + * - time   - milliseconds
>    */
>   #define SF_VOLTAGE	1000
>   #define SF_POWER	1000000
>   #define SF_CURR		1000
>   #define SF_ENERGY	1000000
> +#define SF_TIME		1000
>   
>   struct hwm_reg {
>   	i915_reg_t gt_perf_status;
> @@ -53,6 +55,7 @@ struct i915_hwmon {
>   	struct hwm_reg rg;
>   	int scl_shift_power;
>   	int scl_shift_energy;
> +	int scl_shift_time;
>   };
>   
>   static void
> @@ -161,6 +164,114 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
>   	return 0;
>   }
>   
> +static ssize_t
> +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r, x, y, x_w = 2; /* 2 bits */
> +	u64 tau4, out;
> +
> +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> +
> +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> +	/*
> +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> +	 *     = (4 | x) << (y - 2)
> +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> +	 * However because y can be < 2, we compute
> +	 *     tau4 = (4 | x) << y
> +	 * but add 2 when doing the final right shift to account for units
> +	 */
> +	tau4 = ((1 << x_w) | x) << y;
> +	/* val in hwmon interface units (millisec) */
> +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	return sysfs_emit(buf, "%llu\n", out);
> +}
> +
> +static ssize_t
> +hwm_power1_max_interval_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	long val, max_win, ret;
> +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> +	u64 tau4, r;
> +
> +#define PKG_MAX_WIN_DEFAULT 0x12ull
> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	/*
> +	 * val must be < max in hwmon interface units. The steps below are
> +	 * explained in i915_power1_max_interval_show()
> +	 */
> +	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
AFAIU we need to read r from PACKAGE_POWER_SKU reg untill unless it has 
some known issue?
> +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> +	tau4 = ((1 << x_w) | x) << y;
> +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	if (val > max_win)
> +		return -EINVAL;
> +
> +	/* val in hw units */
> +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> +	/* Convert to 1.x * power(2,y) */
> +	if (!val)
> +		return -EINVAL;
> +	y = ilog2(val);
> +	/* x = (val - (1 << y)) >> (y - 2); */
> +	x = (val - (1ul << y)) << x_w >> y;
> +
> +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> +
> +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> +					    PKG_PWR_LIM_1_TIME, rxy);
> +	return count;
> +}
> +
/snip
>   	if (IS_ERR(hwmon_dev)) {
>   		mutex_destroy(&hwmon->hwmon_lock);
>   		i915->hwmon = NULL;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 956e5298ef1e..68e7cc85dc53 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1811,6 +1811,9 @@
>    * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
>    */
>   #define   PKG_PKG_TDP			GENMASK_ULL(14, 0)
> +#define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
> +#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
> +#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
These GENMASK fields needs a reg definition.
Br,
Anshuman Gupta.
>   
>   #define CHV_CLK_CTL1			_MMIO(0x101100)
>   #define VLV_CLK_CTL2			_MMIO(0x101104)
> diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> index 1014d0b7cc16..9331a3c15fd1 100644
> --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> @@ -206,6 +206,10 @@
>   #define   RPE_MASK				REG_GENMASK(15, 8)
>   #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
>   #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
>   
>   /* snb MCH registers for priority tuning */
>   #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 114 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |   3 +
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
 4 files changed, 129 insertions(+), 1 deletion(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index cc70596fff44..7995a885c9d6 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		September 2022
+KernelVersion:	6
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		September 2022
 KernelVersion:	6
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index bd9ba312c474..7d85a81bc39b 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -20,11 +20,13 @@
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
+ * - time   - milliseconds
  */
 #define SF_VOLTAGE	1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
+#define SF_TIME		1000
 
 struct hwm_reg {
 	i915_reg_t gt_perf_status;
@@ -53,6 +55,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -161,6 +164,114 @@ hwm_energy(struct hwm_drvdata *ddat, long *energy)
 	return 0;
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -472,6 +583,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -510,7 +622,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
 						    ddat,
 						    &hwm_chip_info,
-						    NULL);
+						    hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		mutex_destroy(&hwmon->hwmon_lock);
 		i915->hwmon = NULL;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 956e5298ef1e..68e7cc85dc53 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1811,6 +1811,9 @@
  * *_PACKAGE_POWER_SKU - SKU power and timing parameters.
  */
 #define   PKG_PKG_TDP			GENMASK_ULL(14, 0)
+#define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
+#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
 
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 1014d0b7cc16..9331a3c15fd1 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -206,6 +206,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)
v3: Cleaned up hwm_power1_max_interval_store() (Badal)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 114 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |   4 +-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
 4 files changed, 128 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index bb1101757154..34668f6c2dc4 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index e476c8a9351b..b8ac52f07681 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -16,10 +16,12 @@
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
+ * - time   - milliseconds
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
  */
+#define SF_TIME            1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
@@ -56,6 +58,7 @@ struct i915_hwmon {
 	struct hwm_reg rg;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -177,6 +180,114 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 	return hwm_energy(ddat, energy);
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/*
+	 * val must be < max in hwmon interface units. The steps below are
+	 * explained in i915_power1_max_interval_show()
+	 */
+	r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -495,6 +606,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -533,7 +645,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
 						    ddat,
 						    &hwm_chip_info,
-						    NULL);
+						    hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		mutex_destroy(&hwmon->hwmon_lock);
 		i915->hwmon = NULL;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 6f72e7285e64..68251ba3bc53 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1879,8 +1879,8 @@
 #define   PKG_MIN_PWR			GENMASK_ULL(30, 16)
 #define   PKG_MAX_PWR			GENMASK_ULL(46, 32)
 #define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
-#define     PKG_MAX_WIN_Y		GENMASK_ULL(54, 53)
-#define     PKG_MAX_WIN_X		GENMASK_ULL(52, 48)
+#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
 
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 1014d0b7cc16..9331a3c15fd1 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -206,6 +206,10 @@
 #define   RPE_MASK				REG_GENMASK(15, 8)
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1

Re: [Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Guenter Roeck]

On 8/12/22 10:37, Badal Nilawar wrote:
> From: Ashutosh Dixit <ashutosh.dixit@intel.com>
> 
> Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
> manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
> GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).
> 
> v2: Update date and kernel version in Documentation (Badal)
> 
> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
> Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>

Acked-by: Guenter Roeck <linux@roeck-us.net>

> ---
>   .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
>   drivers/gpu/drm/i915/i915_hwmon.c             | 128 +++++++++++++++++-
>   drivers/gpu/drm/i915/i915_reg.h               |   4 +-
>   drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
>   4 files changed, 142 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> index bb1101757154..34668f6c2dc4 100644
> --- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> +++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
> @@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
>   
>   		Only supported for particular Intel i915 graphics platforms.
>   
> +What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
> +Date:		June 2022
> +KernelVersion:	5.19
> +Contact:	dri-devel@lists.freedesktop.org
> +Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
> +		milliseconds over which sustained power is averaged.
> +
> +		Only supported for particular Intel i915 graphics platforms.
> +
>   What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
>   Date:		June 2022
>   KernelVersion:	5.19
> diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
> index b1a89a6aa220..6760133c7905 100644
> --- a/drivers/gpu/drm/i915/i915_hwmon.c
> +++ b/drivers/gpu/drm/i915/i915_hwmon.c
> @@ -15,10 +15,12 @@
>   
>   /*
>    * SF_* - scale factors for particular quantities according to hwmon spec.
> + * - time   - milliseconds
>    * - power  - microwatts
>    * - curr   - milliamperes
>    * - energy - microjoules
>    */
> +#define SF_TIME            1000
>   #define SF_POWER	1000000
>   #define SF_CURR		1000
>   #define SF_ENERGY	1000000
> @@ -56,6 +58,7 @@ struct i915_hwmon {
>   	u32 power_max_initial_value;
>   	int scl_shift_power;
>   	int scl_shift_energy;
> +	int scl_shift_time;
>   };
>   
>   static void
> @@ -177,6 +180,128 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
>   	return hwm_energy(ddat, energy);
>   }
>   
> +static ssize_t
> +hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
> +			     char *buf)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	intel_wakeref_t wakeref;
> +	u32 r, x, y, x_w = 2; /* 2 bits */
> +	u64 tau4, out;
> +
> +	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
> +
> +	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
> +	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
> +	/*
> +	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
> +	 *     = (4 | x) << (y - 2)
> +	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
> +	 * However because y can be < 2, we compute
> +	 *     tau4 = (4 | x) << y
> +	 * but add 2 when doing the final right shift to account for units
> +	 */
> +	tau4 = ((1 << x_w) | x) << y;
> +	/* val in hwmon interface units (millisec) */
> +	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	return sysfs_emit(buf, "%llu\n", out);
> +}
> +
> +static ssize_t
> +hwm_power1_max_interval_store(struct device *dev,
> +			      struct device_attribute *attr,
> +			      const char *buf, size_t count)
> +{
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +	long val, max_win, ret;
> +	u32 x, y, rxy, x_w = 2; /* 2 bits */
> +	intel_wakeref_t wakeref;
> +	u64 tau4, r;
> +
> +#define PKG_MAX_WIN_DEFAULT 0x12ull
> +
> +	ret = kstrtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	/* val must be < max in hwmon interface units */
> +	if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku)) {
> +		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
> +			r = intel_uncore_read64(ddat->uncore, hwmon->rg.pkg_power_sku);
> +		/*
> +		 * FIXME
> +		 * Wa_22015381490:pvc rg.pkg_power_sku value is incorrect on PVC
> +		 * at least. The following seems to work:
> +		 *	r <<= 8;
> +		 * However for now to be safe just use the default value
> +		 * below. Once issue is resolved remove the one line below.
> +		 */
> +		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> +	} else {
> +		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
> +	}
> +
> +	/* Steps below are explained in i915_power1_max_interval_show() */
> +	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
> +	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
> +	tau4 = ((1 << x_w) | x) << y;
> +	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
> +
> +	if (val > max_win)
> +		return -EINVAL;
> +
> +	/* val in hw units */
> +	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
> +	/* Convert to 1.x * power(2,y) */
> +	if (!val)
> +		return -EINVAL;
> +	y = ilog2(val);
> +	/* x = (val - (1 << y)) >> (y - 2); */
> +	x = (val - (1ul << y)) << x_w >> y;
> +
> +	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
> +
> +	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
> +					    PKG_PWR_LIM_1_TIME, rxy);
> +	return count;
> +}
> +
> +static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
> +			  hwm_power1_max_interval_show,
> +			  hwm_power1_max_interval_store, 0);
> +
> +static struct attribute *hwm_attributes[] = {
> +	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
> +	NULL
> +};
> +
> +static umode_t hwm_attributes_visible(struct kobject *kobj,
> +				      struct attribute *attr, int index)
> +{
> +	struct device *dev = kobj_to_dev(kobj);
> +	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
> +	struct i915_hwmon *hwmon = ddat->hwmon;
> +
> +	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
> +		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
> +	else
> +		return 0;
> +}
> +
> +static const struct attribute_group hwm_attrgroup = {
> +	.attrs = hwm_attributes,
> +	.is_visible = hwm_attributes_visible,
> +};
> +
> +static const struct attribute_group *hwm_groups[] = {
> +	&hwm_attrgroup,
> +	NULL
> +};
> +
>   static const struct hwmon_channel_info *hwm_info[] = {
>   	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
>   	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
> @@ -495,6 +620,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
>   
>   	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
>   	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
> +	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
>   
>   	/*
>   	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
> @@ -533,7 +659,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
>   	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
>   						    ddat,
>   						    &hwm_chip_info,
> -						    NULL);
> +						    hwm_groups);
>   	if (IS_ERR(hwmon_dev)) {
>   		mutex_destroy(&hwmon->hwmon_lock);
>   		i915->hwmon = NULL;
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 041b858b95f4..05db98252a2f 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -1879,8 +1879,8 @@
>   #define   PKG_MIN_PWR			GENMASK_ULL(30, 16)
>   #define   PKG_MAX_PWR			GENMASK_ULL(46, 32)
>   #define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
> -#define     PKG_MAX_WIN_Y		GENMASK_ULL(54, 53)
> -#define     PKG_MAX_WIN_X		GENMASK_ULL(52, 48)
> +#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
> +#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
>   
>   #define CHV_CLK_CTL1			_MMIO(0x101100)
>   #define VLV_CLK_CTL2			_MMIO(0x101104)
> diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> index 18fcfc39ca2f..930cb4d76bbb 100644
> --- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
> +++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
> @@ -204,6 +204,10 @@
>   
>   #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
>   #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
> +#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
> +#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
> +#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
> +#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
>   
>   /* snb MCH registers for priority tuning */
>   #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)

[Intel-gfx] [PATCH 6/7] drm/i915/hwmon: Expose power1_max_interval

[Badal Nilawar]

From: Ashutosh Dixit <ashutosh.dixit@intel.com>

Expose power1_max_interval, that is the tau corresponding to PL1. Some bit
manipulation is needed because of the format of PKG_PWR_LIM_1_TIME in
GT0_PACKAGE_RAPL_LIMIT register (1.x * power(2,y)).

v2: Update date and kernel version in Documentation (Badal)

Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
---
 .../ABI/testing/sysfs-driver-intel-i915-hwmon |   9 ++
 drivers/gpu/drm/i915/i915_hwmon.c             | 128 +++++++++++++++++-
 drivers/gpu/drm/i915/i915_reg.h               |   4 +-
 drivers/gpu/drm/i915/intel_mchbar_regs.h      |   4 +
 4 files changed, 142 insertions(+), 3 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
index bb1101757154..34668f6c2dc4 100644
--- a/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
+++ b/Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon
@@ -26,6 +26,15 @@ Description:	RO. Card default power limit (default TDP setting).
 
 		Only supported for particular Intel i915 graphics platforms.
 
+What:		/sys/devices/.../hwmon/hwmon<i>/power1_max_interval
+Date:		June 2022
+KernelVersion:	5.19
+Contact:	dri-devel@lists.freedesktop.org
+Description:	RW. Sustained power limit interval (Tau in PL1/Tau) in
+		milliseconds over which sustained power is averaged.
+
+		Only supported for particular Intel i915 graphics platforms.
+
 What:		/sys/devices/.../hwmon/hwmon<i>/power1_crit
 Date:		June 2022
 KernelVersion:	5.19
diff --git a/drivers/gpu/drm/i915/i915_hwmon.c b/drivers/gpu/drm/i915/i915_hwmon.c
index b1a89a6aa220..6760133c7905 100644
--- a/drivers/gpu/drm/i915/i915_hwmon.c
+++ b/drivers/gpu/drm/i915/i915_hwmon.c
@@ -15,10 +15,12 @@
 
 /*
  * SF_* - scale factors for particular quantities according to hwmon spec.
+ * - time   - milliseconds
  * - power  - microwatts
  * - curr   - milliamperes
  * - energy - microjoules
  */
+#define SF_TIME            1000
 #define SF_POWER	1000000
 #define SF_CURR		1000
 #define SF_ENERGY	1000000
@@ -56,6 +58,7 @@ struct i915_hwmon {
 	u32 power_max_initial_value;
 	int scl_shift_power;
 	int scl_shift_energy;
+	int scl_shift_time;
 };
 
 static void
@@ -177,6 +180,128 @@ i915_hwmon_energy_status_get(struct drm_i915_private *i915, long *energy)
 	return hwm_energy(ddat, energy);
 }
 
+static ssize_t
+hwm_power1_max_interval_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	intel_wakeref_t wakeref;
+	u32 r, x, y, x_w = 2; /* 2 bits */
+	u64 tau4, out;
+
+	with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+		r = intel_uncore_read(ddat->uncore, hwmon->rg.pkg_rapl_limit);
+
+	x = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_X, r);
+	y = REG_FIELD_GET(PKG_PWR_LIM_1_TIME_Y, r);
+	/*
+	 * tau = 1.x * power(2,y), x = bits(23:22), y = bits(21:17)
+	 *     = (4 | x) << (y - 2)
+	 * where (y - 2) ensures a 1.x fixed point representation of 1.x
+	 * However because y can be < 2, we compute
+	 *     tau4 = (4 | x) << y
+	 * but add 2 when doing the final right shift to account for units
+	 */
+	tau4 = ((1 << x_w) | x) << y;
+	/* val in hwmon interface units (millisec) */
+	out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	return sysfs_emit(buf, "%llu\n", out);
+}
+
+static ssize_t
+hwm_power1_max_interval_store(struct device *dev,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+	long val, max_win, ret;
+	u32 x, y, rxy, x_w = 2; /* 2 bits */
+	intel_wakeref_t wakeref;
+	u64 tau4, r;
+
+#define PKG_MAX_WIN_DEFAULT 0x12ull
+
+	ret = kstrtoul(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	/* val must be < max in hwmon interface units */
+	if (i915_mmio_reg_valid(hwmon->rg.pkg_power_sku)) {
+		with_intel_runtime_pm(ddat->uncore->rpm, wakeref)
+			r = intel_uncore_read64(ddat->uncore, hwmon->rg.pkg_power_sku);
+		/*
+		 * FIXME
+		 * Wa_22015381490:pvc rg.pkg_power_sku value is incorrect on PVC
+		 * at least. The following seems to work:
+		 *	r <<= 8;
+		 * However for now to be safe just use the default value
+		 * below. Once issue is resolved remove the one line below.
+		 */
+		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	} else {
+		r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT);
+	}
+
+	/* Steps below are explained in i915_power1_max_interval_show() */
+	x = REG_FIELD_GET(PKG_MAX_WIN_X, r);
+	y = REG_FIELD_GET(PKG_MAX_WIN_Y, r);
+	tau4 = ((1 << x_w) | x) << y;
+	max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w);
+
+	if (val > max_win)
+		return -EINVAL;
+
+	/* val in hw units */
+	val = DIV_ROUND_CLOSEST_ULL((u64)val << hwmon->scl_shift_time, SF_TIME);
+	/* Convert to 1.x * power(2,y) */
+	if (!val)
+		return -EINVAL;
+	y = ilog2(val);
+	/* x = (val - (1 << y)) >> (y - 2); */
+	x = (val - (1ul << y)) << x_w >> y;
+
+	rxy = REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_X, x) | REG_FIELD_PREP(PKG_PWR_LIM_1_TIME_Y, y);
+
+	hwm_locked_with_pm_intel_uncore_rmw(ddat, hwmon->rg.pkg_rapl_limit,
+					    PKG_PWR_LIM_1_TIME, rxy);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR(power1_max_interval, 0664,
+			  hwm_power1_max_interval_show,
+			  hwm_power1_max_interval_store, 0);
+
+static struct attribute *hwm_attributes[] = {
+	&sensor_dev_attr_power1_max_interval.dev_attr.attr,
+	NULL
+};
+
+static umode_t hwm_attributes_visible(struct kobject *kobj,
+				      struct attribute *attr, int index)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct hwm_drvdata *ddat = dev_get_drvdata(dev);
+	struct i915_hwmon *hwmon = ddat->hwmon;
+
+	if (attr == &sensor_dev_attr_power1_max_interval.dev_attr.attr)
+		return i915_mmio_reg_valid(hwmon->rg.pkg_rapl_limit) ? attr->mode : 0;
+	else
+		return 0;
+}
+
+static const struct attribute_group hwm_attrgroup = {
+	.attrs = hwm_attributes,
+	.is_visible = hwm_attributes_visible,
+};
+
+static const struct attribute_group *hwm_groups[] = {
+	&hwm_attrgroup,
+	NULL
+};
+
 static const struct hwmon_channel_info *hwm_info[] = {
 	HWMON_CHANNEL_INFO(in, HWMON_I_INPUT),
 	HWMON_CHANNEL_INFO(power, HWMON_P_MAX | HWMON_P_RATED_MAX | HWMON_P_CRIT),
@@ -495,6 +620,7 @@ hwm_get_preregistration_info(struct drm_i915_private *i915)
 
 	hwmon->scl_shift_power = REG_FIELD_GET(PKG_PWR_UNIT, val_sku_unit);
 	hwmon->scl_shift_energy = REG_FIELD_GET(PKG_ENERGY_UNIT, val_sku_unit);
+	hwmon->scl_shift_time = REG_FIELD_GET(PKG_TIME_UNIT, val_sku_unit);
 
 	/*
 	 * Initialize 'struct hwm_energy_info', i.e. set fields to the
@@ -533,7 +659,7 @@ void i915_hwmon_register(struct drm_i915_private *i915)
 	hwmon_dev = hwmon_device_register_with_info(dev, ddat->name,
 						    ddat,
 						    &hwm_chip_info,
-						    NULL);
+						    hwm_groups);
 	if (IS_ERR(hwmon_dev)) {
 		mutex_destroy(&hwmon->hwmon_lock);
 		i915->hwmon = NULL;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 041b858b95f4..05db98252a2f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1879,8 +1879,8 @@
 #define   PKG_MIN_PWR			GENMASK_ULL(30, 16)
 #define   PKG_MAX_PWR			GENMASK_ULL(46, 32)
 #define   PKG_MAX_WIN			GENMASK_ULL(54, 48)
-#define     PKG_MAX_WIN_Y		GENMASK_ULL(54, 53)
-#define     PKG_MAX_WIN_X		GENMASK_ULL(52, 48)
+#define     PKG_MAX_WIN_X		GENMASK_ULL(54, 53)
+#define     PKG_MAX_WIN_Y		GENMASK_ULL(52, 48)
 
 #define CHV_CLK_CTL1			_MMIO(0x101100)
 #define VLV_CLK_CTL2			_MMIO(0x101104)
diff --git a/drivers/gpu/drm/i915/intel_mchbar_regs.h b/drivers/gpu/drm/i915/intel_mchbar_regs.h
index 18fcfc39ca2f..930cb4d76bbb 100644
--- a/drivers/gpu/drm/i915/intel_mchbar_regs.h
+++ b/drivers/gpu/drm/i915/intel_mchbar_regs.h
@@ -204,6 +204,10 @@
 
 #define PCU_PACKAGE_RAPL_LIMIT			_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x59a0)
 #define   PKG_PWR_LIM_1				REG_GENMASK(14, 0)
+#define   PKG_PWR_LIM_1_EN			REG_BIT(15)
+#define   PKG_PWR_LIM_1_TIME			REG_GENMASK(23, 17)
+#define   PKG_PWR_LIM_1_TIME_X			REG_GENMASK(23, 22)
+#define   PKG_PWR_LIM_1_TIME_Y			REG_GENMASK(21, 17)
 
 /* snb MCH registers for priority tuning */
 #define MCH_SSKPD				_MMIO(MCHBAR_MIRROR_BASE_SNB + 0x5d10)
-- 
2.25.1