From: Imre Deak <imre.deak@intel.com>
To: intel-gfx@lists.freedesktop.org
Subject: [Intel-gfx] [PATCH 14/29] drm/i915/tc: Fix up the legacy VBT flag only in disconnected mode
Date: Thu, 23 Mar 2023 16:20:20 +0200 [thread overview]
Message-ID: <20230323142035.1432621-15-imre.deak@intel.com> (raw)
In-Reply-To: <20230323142035.1432621-1-imre.deak@intel.com>
A follow-up patch simplifies the tc_cold_block()/unblock() functions,
dropping the power domain parameter. For this it must be ensured that
the power domain - which depends on the actual TC mode and so the VBT
legacy port flag - can't change while the PHY is in a connected state
and accordingly TC-cold is blocked. Make this so, by fixing up the VBT
legacy flag only in the disconnected TC mode, instead of whenever the
HPD state is retrieved.
Signed-off-by: Imre Deak <imre.deak@intel.com>
---
drivers/gpu/drm/i915/display/intel_tc.c | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_tc.c b/drivers/gpu/drm/i915/display/intel_tc.c
index e63e9c57e5627..e61daa40356b5 100644
--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -298,6 +298,11 @@ static void tc_port_fixup_legacy_flag(struct intel_tc_port *tc,
struct drm_i915_private *i915 = tc_to_i915(tc);
u32 valid_hpd_mask;
+ drm_WARN_ON(&i915->drm, tc->mode != TC_PORT_DISCONNECTED);
+
+ if (hweight32(live_status_mask) != 1)
+ return;
+
if (tc->legacy_port)
valid_hpd_mask = BIT(TC_PORT_LEGACY);
else
@@ -625,8 +630,7 @@ static u32 tc_phy_hpd_live_status(struct intel_tc_port *tc)
mask = tc->phy_ops->hpd_live_status(tc);
/* The sink can be connected only in a single mode. */
- if (!drm_WARN_ON_ONCE(&i915->drm, hweight32(mask) > 1))
- tc_port_fixup_legacy_flag(tc, mask);
+ drm_WARN_ON_ONCE(&i915->drm, hweight32(mask) > 1);
return mask;
}
@@ -826,9 +830,12 @@ tc_phy_get_target_mode(struct intel_tc_port *tc)
static void tc_phy_connect(struct intel_tc_port *tc, int required_lanes)
{
struct drm_i915_private *i915 = tc_to_i915(tc);
+ u32 live_status_mask = tc_phy_hpd_live_status(tc);
bool connected;
- tc->mode = tc_phy_get_target_mode(tc);
+ tc_port_fixup_legacy_flag(tc, live_status_mask);
+
+ tc->mode = hpd_mask_to_target_mode(tc, live_status_mask);
connected = tc->phy_ops->connect(tc, required_lanes);
if (!connected && tc->mode != default_tc_mode(tc)) {
--
2.37.1
next prev parent reply other threads:[~2023-03-23 14:21 UTC|newest]
Thread overview: 74+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 14:20 [Intel-gfx] [PATCH 00/29] drm/i915/tc: Align the ADLP TypeC sequences with bspec Imre Deak
2023-03-23 14:20 ` [Intel-gfx] [PATCH 01/29] drm/i915/tc: Group the TC PHY setup/query functions per platform Imre Deak
2023-03-23 14:33 ` Jani Nikula
2023-03-24 9:36 ` Kahola, Mika
2023-03-23 16:50 ` kernel test robot
2023-03-23 16:50 ` kernel test robot
2023-03-23 14:20 ` [Intel-gfx] [PATCH 02/29] drm/i915/tc: Use the adlp prefix for ADLP TC PHY functions Imre Deak
2023-03-24 9:41 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 03/29] drm/i915/tc: Rename tc_phy_status_complete() to tc_phy_is_ready() Imre Deak
2023-03-24 9:48 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 04/29] drm/i915/tc: Use the tc_phy prefix for all TC PHY functions Imre Deak
2023-03-24 9:51 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 05/29] drm/i915/tc: Move TC port fields to a new intel_tc_port struct Imre Deak
2023-03-24 12:01 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 06/29] drm/i915/tc: Check for TC PHY explicitly in intel_tc_port_fia_max_lane_count() Imre Deak
2023-03-24 13:07 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 07/29] drm/i915/tc: Move the intel_tc_port struct declaration to intel_tc.c Imre Deak
2023-03-24 13:08 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 08/29] drm/i915/tc: Add TC PHY hook to get the PHY HPD live status Imre Deak
2023-03-24 13:10 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 09/29] drm/i915/tc: Add TC PHY hooks to get the PHY ready/owned state Imre Deak
2023-03-24 13:11 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 10/29] drm/i915/tc: Add TC PHY hook to read out the PHY HW state Imre Deak
2023-03-24 13:35 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 11/29] drm/i915/tc: Add generic TC PHY connect/disconnect handlers Imre Deak
2023-03-24 14:20 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 12/29] drm/i915/tc: Factor out tc_phy_verify_legacy_or_dp_alt_mode() Imre Deak
2023-03-24 14:21 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 13/29] drm/i915/tc: Add TC PHY hooks to connect/disconnect the PHY Imre Deak
2023-03-27 11:04 ` Kahola, Mika
2023-03-23 14:20 ` Imre Deak [this message]
2023-03-27 11:05 ` [Intel-gfx] [PATCH 14/29] drm/i915/tc: Fix up the legacy VBT flag only in disconnected mode Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 15/29] drm/i915/tc: Check TC mode instead of the VBT legacy flag Imre Deak
2023-03-27 11:06 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 16/29] drm/i915/tc: Block/unblock TC-cold in the PHY connect/disconnect hooks Imre Deak
2023-03-27 11:52 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 17/29] drm/i915/tc: Remove redundant wakeref=0 check from unblock_tc_cold() Imre Deak
2023-03-27 11:53 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 18/29] drm/i915/tc: Drop tc_cold_block()/unblock()'s power domain parameter Imre Deak
2023-03-27 11:55 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 19/29] drm/i915/tc: Add TC PHY hook to get the TC-cold blocking power domain Imre Deak
2023-03-27 11:57 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 20/29] drm/i915/tc: Add asserts in TC PHY hooks that the required power is on Imre Deak
2023-03-23 14:33 ` Jani Nikula
2023-03-23 17:08 ` Imre Deak
2023-03-27 12:00 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 21/29] drm/i915/tc: Add TC PHY hook to init the PHY Imre Deak
2023-03-27 12:01 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 22/29] drm/i915/adlp/tc: Use the DE HPD ISR register for hotplug detection Imre Deak
2023-03-27 12:15 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 23/29] drm/i915/tc: Get power ref for reading the HPD live status register Imre Deak
2023-03-27 12:43 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 24/29] drm/i915/tc: Don't connect the PHY in intel_tc_port_connected() Imre Deak
2023-03-27 12:48 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 25/29] drm/i915/adlp/tc: Align the connect/disconnect PHY sequence with bspec Imre Deak
2023-03-28 10:13 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 26/29] drm/i915: Move shared DPLL disabling into CRTC disable hook Imre Deak
2023-03-28 10:14 ` Kahola, Mika
2023-03-30 16:16 ` [Intel-gfx] [PATCH v2 " Imre Deak
2023-03-23 14:20 ` [Intel-gfx] [PATCH 27/29] drm/i915: Disable DPLLs before disconnecting the TC PHY Imre Deak
2023-03-28 10:15 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 28/29] drm/i915: Remove TC PHY disconnect workaround Imre Deak
2023-03-28 10:16 ` Kahola, Mika
2023-03-23 14:20 ` [Intel-gfx] [PATCH 29/29] drm/i915: Remove the encoder update_prepare()/complete() hooks Imre Deak
2023-03-28 10:18 ` Kahola, Mika
2023-03-23 16:03 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/tc: Align the ADLP TypeC sequences with bspec Patchwork
2023-03-23 16:03 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-03-23 16:20 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-03-23 20:26 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-03-30 23:23 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/tc: Align the ADLP TypeC sequences with bspec (rev2) Patchwork
2023-03-30 23:23 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-03-30 23:33 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-04-01 0:02 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-04-03 9:06 ` Imre Deak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323142035.1432621-15-imre.deak@intel.com \
--to=imre.deak@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).