[Intel-gfx] [V13 0/5] Add support for mipi dsi cmd mode

[Intel-gfx] [V13 0/5] Add support for mipi dsi cmd mode

[Vandita Kulkarni]

This series contain interrupt handling part of cmd mode.
Configuration patches were merged already.

v10: Address the review comments on patch 3 and 4
v11: fix compilation issue introduced in v10
v12: fix check patch errors on patch 3
v13: Use sw vblank counter (Ville)

Vandita Kulkarni (5):
  drm/i915/dsi: Add details about TE in get_config
  i915/dsi: Configure TE interrupt for cmd mode
  drm/i915/dsi: Add TE handler for dsi cmd mode.
  drm/i915/dsi: Initiate fame request in cmd mode
  drm/i915/dsi: Enable software vblank counter

 drivers/gpu/drm/i915/display/icl_dsi.c       |  56 +++++++--
 drivers/gpu/drm/i915/display/intel_display.c |  21 ++++
 drivers/gpu/drm/i915/display/intel_dsi.h     |   1 +
 drivers/gpu/drm/i915/i915_irq.c              | 119 ++++++++++++++++++-
 4 files changed, 183 insertions(+), 14 deletions(-)

-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [V13 1/5] drm/i915/dsi: Add details about TE in get_config

[Vandita Kulkarni]

We need details about enabling TE on which port
before we enable TE through vblank enable path.
This is based on the configuration that we receive
from the VBT wrt ports, dual_link.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 30 +++++++++++++++-----------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 520715b7d5b5..2789020e20db 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1447,6 +1447,18 @@ static bool gen11_dsi_is_periodic_cmd_mode(struct intel_dsi *intel_dsi)
 	return (val & DSI_PERIODIC_FRAME_UPDATE_ENABLE);
 }
 
+static void gen11_dsi_get_cmd_mode_config(struct intel_dsi *intel_dsi,
+					  struct intel_crtc_state *pipe_config)
+{
+	if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1 |
+					    I915_MODE_FLAG_DSI_USE_TE0;
+	else if (intel_dsi->ports == BIT(PORT_B))
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE1;
+	else
+		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_USE_TE0;
+}
+
 static void gen11_dsi_get_config(struct intel_encoder *encoder,
 				 struct intel_crtc_state *pipe_config)
 {
@@ -1468,6 +1480,10 @@ static void gen11_dsi_get_config(struct intel_encoder *encoder,
 	pipe_config->output_types |= BIT(INTEL_OUTPUT_DSI);
 	pipe_config->pipe_bpp = bdw_get_pipemisc_bpp(crtc);
 
+	/* Get the details on which TE should be enabled */
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
+
 	if (gen11_dsi_is_periodic_cmd_mode(intel_dsi))
 		pipe_config->mode_flags |= I915_MODE_FLAG_DSI_PERIODIC_CMD_MODE;
 }
@@ -1562,18 +1578,8 @@ static int gen11_dsi_compute_config(struct intel_encoder *encoder,
 	 * receive TE from the slave if
 	 * dual link is enabled
 	 */
-	if (is_cmd_mode(intel_dsi)) {
-		if (intel_dsi->ports == (BIT(PORT_B) | BIT(PORT_A)))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1 |
-						I915_MODE_FLAG_DSI_USE_TE0;
-		else if (intel_dsi->ports == BIT(PORT_B))
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE1;
-		else
-			pipe_config->mode_flags |=
-						I915_MODE_FLAG_DSI_USE_TE0;
-	}
+	if (is_cmd_mode(intel_dsi))
+		gen11_dsi_get_cmd_mode_config(intel_dsi, pipe_config);
 
 	return 0;
 }
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [V13 2/5] i915/dsi: Configure TE interrupt for cmd mode

[Vandita Kulkarni]

Configure TE interrupt as part of the vblank
enable call flow.

v2: Hide the private flags check inside configure_te (Jani)

v3: Fix the position of masking de_port_masked for DSI_TE.

v4: Simplify the caller of configure_te (Jani)

v5: Clear IIR, remove the usage of private_flags

v6: including icl_dsi header is not needed

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 50 +++++++++++++++++++++++++++++++--
 1 file changed, 48 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 759f523c6a6b..913548addfba 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2631,12 +2631,47 @@ int ilk_enable_vblank(struct drm_crtc *crtc)
 	return 0;
 }
 
+static bool gen11_dsi_configure_te(struct intel_crtc *intel_crtc,
+				   bool enable)
+{
+	struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
+	enum port port;
+	u32 tmp;
+
+	if (!(intel_crtc->mode_flags &
+	    (I915_MODE_FLAG_DSI_USE_TE1 | I915_MODE_FLAG_DSI_USE_TE0)))
+		return false;
+
+	/* for dual link cases we consider TE from slave */
+	if (intel_crtc->mode_flags & I915_MODE_FLAG_DSI_USE_TE1)
+		port = PORT_B;
+	else
+		port = PORT_A;
+
+	tmp =  I915_READ(DSI_INTR_MASK_REG(port));
+	if (enable)
+		tmp &= ~DSI_TE_EVENT;
+	else
+		tmp |= DSI_TE_EVENT;
+
+	I915_WRITE(DSI_INTR_MASK_REG(port), tmp);
+
+	tmp = I915_READ(DSI_INTR_IDENT_REG(port));
+	I915_WRITE(DSI_INTR_IDENT_REG(port), tmp);
+
+	return true;
+}
+
 int bdw_enable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum pipe pipe = intel_crtc->pipe;
 	unsigned long irqflags;
 
+	if (gen11_dsi_configure_te(intel_crtc, true))
+		return 0;
+
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	bdw_enable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
@@ -2702,9 +2737,13 @@ void ilk_disable_vblank(struct drm_crtc *crtc)
 void bdw_disable_vblank(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
-	enum pipe pipe = to_intel_crtc(crtc)->pipe;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	enum pipe pipe = intel_crtc->pipe;
 	unsigned long irqflags;
 
+	if (gen11_dsi_configure_te(intel_crtc, false))
+		return;
+
 	spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
 	bdw_disable_pipe_irq(dev_priv, pipe, GEN8_PIPE_VBLANK);
 	spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
@@ -3400,6 +3439,13 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
 	if (IS_GEN9_LP(dev_priv))
 		de_port_masked |= BXT_DE_PORT_GMBUS;
 
+	if (INTEL_GEN(dev_priv) >= 11) {
+		enum port port;
+
+		if (intel_bios_is_dsi_present(dev_priv, &port))
+			de_port_masked |= DSI0_TE | DSI1_TE;
+	}
+
 	de_pipe_enables = de_pipe_masked | GEN8_PIPE_VBLANK |
 					   GEN8_PIPE_FIFO_UNDERRUN;
 
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [V13 3/5] drm/i915/dsi: Add TE handler for dsi cmd mode.

[Vandita Kulkarni]

In case of dual link, we get the TE on slave.
So clear the TE on slave DSI IIR.

If we are operating in TE_GATE mode, after we do
a frame update, the transcoder will send the frame data
to the panel, after it receives a TE. Whereas if we
are operating in NO_GATE mode then the transcoder will
immediately send the frame data to the panel.
We are not dealing with the periodic command mode here.

v2: Pass only relevant masked bits to the handler (Jani)

v3: Fix the check for cmd mode in TE handler function.

v4: Use intel_handle_vblank instead of drm_handle_vblank (Jani)

v3: Use static on handler func (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
---
 drivers/gpu/drm/i915/i915_irq.c | 65 +++++++++++++++++++++++++++++++++
 1 file changed, 65 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 913548addfba..c2e4b227bdf3 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -2237,6 +2237,63 @@ gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
 		drm_err(&dev_priv->drm, "Unexpected DE Misc interrupt\n");
 }
 
+static void gen11_dsi_te_interrupt_handler(struct drm_i915_private *dev_priv,
+					   u32 te_trigger)
+{
+	enum pipe pipe = INVALID_PIPE;
+	enum transcoder dsi_trans;
+	enum port port;
+	u32 val, tmp;
+
+	/*
+	 * Incase of dual link, TE comes from DSI_1
+	 * this is to check if dual link is enabled
+	 */
+	val = I915_READ(TRANS_DDI_FUNC_CTL2(TRANSCODER_DSI_0));
+	val &= PORT_SYNC_MODE_ENABLE;
+
+	/*
+	 * if dual link is enabled, then read DSI_0
+	 * transcoder registers
+	 */
+	port = ((te_trigger & DSI1_TE && val) || (te_trigger & DSI0_TE)) ?
+						  PORT_A : PORT_B;
+	dsi_trans = (port == PORT_A) ? TRANSCODER_DSI_0 : TRANSCODER_DSI_1;
+
+	/* Check if DSI configured in command mode */
+	val = I915_READ(DSI_TRANS_FUNC_CONF(dsi_trans));
+	val = val & OP_MODE_MASK;
+
+	if (val != CMD_MODE_NO_GATE && val != CMD_MODE_TE_GATE) {
+		drm_err(&dev_priv->drm, "DSI trancoder not configured in command mode\n");
+		return;
+	}
+
+	/* Get PIPE for handling VBLANK event */
+	val = I915_READ(TRANS_DDI_FUNC_CTL(dsi_trans));
+	switch (val & TRANS_DDI_EDP_INPUT_MASK) {
+	case TRANS_DDI_EDP_INPUT_A_ON:
+		pipe = PIPE_A;
+		break;
+	case TRANS_DDI_EDP_INPUT_B_ONOFF:
+		pipe = PIPE_B;
+		break;
+	case TRANS_DDI_EDP_INPUT_C_ONOFF:
+		pipe = PIPE_C;
+		break;
+	default:
+		drm_err(&dev_priv->drm, "Invalid PIPE\n");
+		return;
+	}
+
+	intel_handle_vblank(dev_priv, pipe);
+
+	/* clear TE in dsi IIR */
+	port = (te_trigger & DSI1_TE) ? PORT_B : PORT_A;
+	tmp = I915_READ(DSI_INTR_IDENT_REG(port));
+	I915_WRITE(DSI_INTR_IDENT_REG(port), tmp);
+}
+
 static irqreturn_t
 gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
 {
@@ -2301,6 +2358,14 @@ gen8_de_irq_handler(struct drm_i915_private *dev_priv, u32 master_ctl)
 				found = true;
 			}
 
+			if (INTEL_GEN(dev_priv) >= 11) {
+				tmp_mask = iir & (DSI0_TE | DSI1_TE);
+				if (tmp_mask) {
+					gen11_dsi_te_interrupt_handler(dev_priv, tmp_mask);
+					found = true;
+				}
+			}
+
 			if (!found)
 				drm_err(&dev_priv->drm,
 					"Unexpected DE Port interrupt\n");
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode

[Vandita Kulkarni]

In TE Gate mode or TE NO_GATE mode on every flip
we need to set the frame update request bit.
After this  bit is set transcoder hardware will
automatically send the frame data to the panel
in case of TE NO_GATE mode, where it sends after
it receives the TE event in case of TE_GATE mode.
Once the frame data is sent to the panel, we see
the frame counter updating.

v2: Use intel_de_read/write

v3: remove the usage of private_flags

v4: Use icl_dsi in func names if non static,
    fix code formatting issues. (Jani)

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
 drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
 drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
 3 files changed, 37 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 2789020e20db..7d2abc7f6ba3 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host *host,
 	return 0;
 }
 
+void icl_dsi_frame_update(struct intel_crtc_state *crtc_state)
+{
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
+	u32 tmp, flags;
+	enum port port;
+
+	flags = crtc->mode_flags;
+
+	/*
+	 * case 1 also covers dual link
+	 * In case of dual link, frame update should be set on
+	 * DSI_0
+	 */
+	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
+		port = PORT_A;
+	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
+		port = PORT_B;
+	else
+		return;
+
+	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
+	tmp |= DSI_FRAME_UPDATE_REQUEST;
+	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp);
+}
+
 static void dsi_program_swing_and_deemphasis(struct intel_encoder *encoder)
 {
 	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 5a9d933e425a..c4f331f2af45 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -15616,6 +15616,16 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
 		intel_set_cdclk_post_plane_update(state);
 	}
 
+	/*
+	 * Incase of mipi dsi command mode, we need to set frame update
+	 * for every commit
+	 */
+	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
+		if (INTEL_GEN(dev_priv) >= 11 &&
+		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
+			if (new_crtc_state->hw.active)
+				icl_dsi_frame_update(new_crtc_state);
+
 	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
 	 * already, but still need the state for the delayed optimization. To
 	 * fix this:
diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
index 19f78a4022d3..625f2f1ae061 100644
--- a/drivers/gpu/drm/i915/display/intel_dsi.h
+++ b/drivers/gpu/drm/i915/display/intel_dsi.h
@@ -167,6 +167,7 @@ static inline u16 intel_dsi_encoder_ports(struct intel_encoder *encoder)
 
 /* icl_dsi.c */
 void icl_dsi_init(struct drm_i915_private *dev_priv);
+void icl_dsi_frame_update(struct intel_crtc_state *crtc_state);
 
 /* intel_dsi.c */
 int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode

[Ville Syrjälä]

On Tue, Sep 22, 2020 at 07:14:25PM +0530, Vandita Kulkarni wrote:
> In TE Gate mode or TE NO_GATE mode on every flip
> we need to set the frame update request bit.
> After this  bit is set transcoder hardware will
> automatically send the frame data to the panel
> in case of TE NO_GATE mode, where it sends after
> it receives the TE event in case of TE_GATE mode.
> Once the frame data is sent to the panel, we see
> the frame counter updating.
> 
> v2: Use intel_de_read/write
> 
> v3: remove the usage of private_flags
> 
> v4: Use icl_dsi in func names if non static,
>     fix code formatting issues. (Jani)
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> ---
>  drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
>  drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
>  drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
>  3 files changed, 37 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
> index 2789020e20db..7d2abc7f6ba3 100644
> --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host *host,
>  	return 0;
>  }
>  
> +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state)
> +{
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> +	u32 tmp, flags;
> +	enum port port;
> +
> +	flags = crtc->mode_flags;
> +
> +	/*
> +	 * case 1 also covers dual link
> +	 * In case of dual link, frame update should be set on
> +	 * DSI_0
> +	 */
> +	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> +		port = PORT_A;
> +	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> +		port = PORT_B;
> +	else
> +		return;
> +
> +	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> +	tmp |= DSI_FRAME_UPDATE_REQUEST;
> +	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp);
> +}
> +
>  static void dsi_program_swing_and_deemphasis(struct intel_encoder *encoder)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 5a9d933e425a..c4f331f2af45 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -15616,6 +15616,16 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
>  		intel_set_cdclk_post_plane_update(state);
>  	}
>  
> +	/*
> +	 * Incase of mipi dsi command mode, we need to set frame update
> +	 * for every commit
> +	 */
> +	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> +		if (INTEL_GEN(dev_priv) >= 11 &&
> +		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> +			if (new_crtc_state->hw.active)
> +				icl_dsi_frame_update(new_crtc_state);
> +

Still the wrong place.

>  	/* FIXME: We should call drm_atomic_helper_commit_hw_done() here
>  	 * already, but still need the state for the delayed optimization. To
>  	 * fix this:
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
> index 19f78a4022d3..625f2f1ae061 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> @@ -167,6 +167,7 @@ static inline u16 intel_dsi_encoder_ports(struct intel_encoder *encoder)
>  
>  /* icl_dsi.c */
>  void icl_dsi_init(struct drm_i915_private *dev_priv);
> +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state);
>  
>  /* intel_dsi.c */
>  int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
> -- 
> 2.21.0.5.gaeb582a

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode

[Kulkarni, Vandita]

> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Wednesday, September 23, 2020 3:30 PM
> To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode
> 
> On Tue, Sep 22, 2020 at 07:14:25PM +0530, Vandita Kulkarni wrote:
> > In TE Gate mode or TE NO_GATE mode on every flip we need to set the
> > frame update request bit.
> > After this  bit is set transcoder hardware will automatically send the
> > frame data to the panel in case of TE NO_GATE mode, where it sends
> > after it receives the TE event in case of TE_GATE mode.
> > Once the frame data is sent to the panel, we see the frame counter
> > updating.
> >
> > v2: Use intel_de_read/write
> >
> > v3: remove the usage of private_flags
> >
> > v4: Use icl_dsi in func names if non static,
> >     fix code formatting issues. (Jani)
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
> >  drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
> >  drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
> >  3 files changed, 37 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> > b/drivers/gpu/drm/i915/display/icl_dsi.c
> > index 2789020e20db..7d2abc7f6ba3 100644
> > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host
> *host,
> >  	return 0;
> >  }
> >
> > +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state) {
> > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > +	u32 tmp, flags;
> > +	enum port port;
> > +
> > +	flags = crtc->mode_flags;
> > +
> > +	/*
> > +	 * case 1 also covers dual link
> > +	 * In case of dual link, frame update should be set on
> > +	 * DSI_0
> > +	 */
> > +	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> > +		port = PORT_A;
> > +	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> > +		port = PORT_B;
> > +	else
> > +		return;
> > +
> > +	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> > +	tmp |= DSI_FRAME_UPDATE_REQUEST;
> > +	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp); }
> > +
> >  static void dsi_program_swing_and_deemphasis(struct intel_encoder
> > *encoder)  {
> >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> diff
> > --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 5a9d933e425a..c4f331f2af45 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -15616,6 +15616,16 @@ static void intel_atomic_commit_tail(struct
> intel_atomic_state *state)
> >  		intel_set_cdclk_post_plane_update(state);
> >  	}
> >
> > +	/*
> > +	 * Incase of mipi dsi command mode, we need to set frame update
> > +	 * for every commit
> > +	 */
> > +	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> > +		if (INTEL_GEN(dev_priv) >= 11 &&
> > +		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> > +			if (new_crtc_state->hw.active)
> > +				icl_dsi_frame_update(new_crtc_state);
> > +
> 
> Still the wrong place.
Should I be adding it at the end of pipe update? As we need TE to be enabled when we send frame update.

-Thanks
Vandita
> 
> >  	/* FIXME: We should call drm_atomic_helper_commit_hw_done()
> here
> >  	 * already, but still need the state for the delayed optimization. To
> >  	 * fix this:
> > diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h
> > b/drivers/gpu/drm/i915/display/intel_dsi.h
> > index 19f78a4022d3..625f2f1ae061 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> > +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> > @@ -167,6 +167,7 @@ static inline u16 intel_dsi_encoder_ports(struct
> > intel_encoder *encoder)
> >
> >  /* icl_dsi.c */
> >  void icl_dsi_init(struct drm_i915_private *dev_priv);
> > +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state);
> >
> >  /* intel_dsi.c */
> >  int intel_dsi_bitrate(const struct intel_dsi *intel_dsi);
> > --
> > 2.21.0.5.gaeb582a
> 
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode

[Ville Syrjälä]

On Wed, Sep 23, 2020 at 10:02:49AM +0000, Kulkarni, Vandita wrote:
> > -----Original Message-----
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Sent: Wednesday, September 23, 2020 3:30 PM
> > To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> > Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> > Subject: Re: [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode
> > 
> > On Tue, Sep 22, 2020 at 07:14:25PM +0530, Vandita Kulkarni wrote:
> > > In TE Gate mode or TE NO_GATE mode on every flip we need to set the
> > > frame update request bit.
> > > After this  bit is set transcoder hardware will automatically send the
> > > frame data to the panel in case of TE NO_GATE mode, where it sends
> > > after it receives the TE event in case of TE_GATE mode.
> > > Once the frame data is sent to the panel, we see the frame counter
> > > updating.
> > >
> > > v2: Use intel_de_read/write
> > >
> > > v3: remove the usage of private_flags
> > >
> > > v4: Use icl_dsi in func names if non static,
> > >     fix code formatting issues. (Jani)
> > >
> > > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/icl_dsi.c       | 26 ++++++++++++++++++++
> > >  drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
> > >  drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
> > >  3 files changed, 37 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> > > b/drivers/gpu/drm/i915/display/icl_dsi.c
> > > index 2789020e20db..7d2abc7f6ba3 100644
> > > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > > @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct intel_dsi_host
> > *host,
> > >  	return 0;
> > >  }
> > >
> > > +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state) {
> > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > +	u32 tmp, flags;
> > > +	enum port port;
> > > +
> > > +	flags = crtc->mode_flags;
> > > +
> > > +	/*
> > > +	 * case 1 also covers dual link
> > > +	 * In case of dual link, frame update should be set on
> > > +	 * DSI_0
> > > +	 */
> > > +	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> > > +		port = PORT_A;
> > > +	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> > > +		port = PORT_B;
> > > +	else
> > > +		return;
> > > +
> > > +	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> > > +	tmp |= DSI_FRAME_UPDATE_REQUEST;
> > > +	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp); }
> > > +
> > >  static void dsi_program_swing_and_deemphasis(struct intel_encoder
> > > *encoder)  {
> > >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > diff
> > > --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index 5a9d933e425a..c4f331f2af45 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -15616,6 +15616,16 @@ static void intel_atomic_commit_tail(struct
> > intel_atomic_state *state)
> > >  		intel_set_cdclk_post_plane_update(state);
> > >  	}
> > >
> > > +	/*
> > > +	 * Incase of mipi dsi command mode, we need to set frame update
> > > +	 * for every commit
> > > +	 */
> > > +	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> > > +		if (INTEL_GEN(dev_priv) >= 11 &&
> > > +		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> > > +			if (new_crtc_state->hw.active)
> > > +				icl_dsi_frame_update(new_crtc_state);
> > > +
> > 
> > Still the wrong place.
> Should I be adding it at the end of pipe update? As we need TE to be enabled when we send frame update.

If it needs te then it should probably enable te.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode

[Kulkarni, Vandita]

> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Wednesday, September 23, 2020 4:03 PM
> To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [V13 4/5] drm/i915/dsi: Initiate fame request in cmd mode
> 
> On Wed, Sep 23, 2020 at 10:02:49AM +0000, Kulkarni, Vandita wrote:
> > > -----Original Message-----
> > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Sent: Wednesday, September 23, 2020 3:30 PM
> > > To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> > > Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani
> > > <jani.nikula@intel.com>
> > > Subject: Re: [V13 4/5] drm/i915/dsi: Initiate fame request in cmd
> > > mode
> > >
> > > On Tue, Sep 22, 2020 at 07:14:25PM +0530, Vandita Kulkarni wrote:
> > > > In TE Gate mode or TE NO_GATE mode on every flip we need to set
> > > > the frame update request bit.
> > > > After this  bit is set transcoder hardware will automatically send
> > > > the frame data to the panel in case of TE NO_GATE mode, where it
> > > > sends after it receives the TE event in case of TE_GATE mode.
> > > > Once the frame data is sent to the panel, we see the frame counter
> > > > updating.
> > > >
> > > > v2: Use intel_de_read/write
> > > >
> > > > v3: remove the usage of private_flags
> > > >
> > > > v4: Use icl_dsi in func names if non static,
> > > >     fix code formatting issues. (Jani)
> > > >
> > > > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/display/icl_dsi.c       | 26
> ++++++++++++++++++++
> > > >  drivers/gpu/drm/i915/display/intel_display.c | 10 ++++++++
> > > >  drivers/gpu/drm/i915/display/intel_dsi.h     |  1 +
> > > >  3 files changed, 37 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c
> > > > b/drivers/gpu/drm/i915/display/icl_dsi.c
> > > > index 2789020e20db..7d2abc7f6ba3 100644
> > > > --- a/drivers/gpu/drm/i915/display/icl_dsi.c
> > > > +++ b/drivers/gpu/drm/i915/display/icl_dsi.c
> > > > @@ -205,6 +205,32 @@ static int dsi_send_pkt_payld(struct
> > > > intel_dsi_host
> > > *host,
> > > >  	return 0;
> > > >  }
> > > >
> > > > +void icl_dsi_frame_update(struct intel_crtc_state *crtc_state) {
> > > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > > +	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > > > +	u32 tmp, flags;
> > > > +	enum port port;
> > > > +
> > > > +	flags = crtc->mode_flags;
> > > > +
> > > > +	/*
> > > > +	 * case 1 also covers dual link
> > > > +	 * In case of dual link, frame update should be set on
> > > > +	 * DSI_0
> > > > +	 */
> > > > +	if (flags & I915_MODE_FLAG_DSI_USE_TE0)
> > > > +		port = PORT_A;
> > > > +	else if (flags & I915_MODE_FLAG_DSI_USE_TE1)
> > > > +		port = PORT_B;
> > > > +	else
> > > > +		return;
> > > > +
> > > > +	tmp = intel_de_read(dev_priv, DSI_CMD_FRMCTL(port));
> > > > +	tmp |= DSI_FRAME_UPDATE_REQUEST;
> > > > +	intel_de_write(dev_priv, DSI_CMD_FRMCTL(port), tmp); }
> > > > +
> > > >  static void dsi_program_swing_and_deemphasis(struct intel_encoder
> > > > *encoder)  {
> > > >  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > > diff
> > > > --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index 5a9d933e425a..c4f331f2af45 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -15616,6 +15616,16 @@ static void
> > > > intel_atomic_commit_tail(struct
> > > intel_atomic_state *state)
> > > >  		intel_set_cdclk_post_plane_update(state);
> > > >  	}
> > > >
> > > > +	/*
> > > > +	 * Incase of mipi dsi command mode, we need to set frame update
> > > > +	 * for every commit
> > > > +	 */
> > > > +	for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> > > > +		if (INTEL_GEN(dev_priv) >= 11 &&
> > > > +		    intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
> > > > +			if (new_crtc_state->hw.active)
> > > > +				icl_dsi_frame_update(new_crtc_state);
> > > > +
> > >
> > > Still the wrong place.
> > Should I be adding it at the end of pipe update? As we need TE to be
> enabled when we send frame update.
> 
> If it needs te then it should probably enable te.

Thanks for pointing this out.
Just to make sure on my assumption of keeping TE enabled before sending frame update,
I cross checked with the hw team and there seems to be no such rule.
Frame update request will be valid until the transcoder starts the frame.
Like you pointed out will add this to the beginning of pipe_update_end,
And send the next version.

Thanks,
Vandita


> 
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] [V13 5/5] drm/i915/dsi: Enable software vblank counter

[Vandita Kulkarni]

In case of DSI cmd mode, we get hw vblank counter
updated after the TE comes in, if we try to read
the hw vblank counter in te handler we wouldnt have
the udpated vblank counter yet.
This will lead to a state where we would send the
vblank event to the user space in the next te,
though the frame update would have completed in
the first TE duration itself.
Hence switch to using software timestamp based
vblank counter.

Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c | 11 +++++++++++
 drivers/gpu/drm/i915/i915_irq.c              |  4 ++++
 2 files changed, 15 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index c4f331f2af45..8b9e59e52708 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -1808,6 +1808,17 @@ enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
 static u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
+	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+	u32 flags = crtc->mode_flags;
+
+	/*
+	 * From Gen 11, In case of dsi cmd mode, frame counter wouldnt
+	 * have updated at the beginning of TE, if we want to use
+	 * the hw counter, then we would find it updated in only
+	 * the next TE, hence switching to sw counter.
+	 */
+	if (flags & (I915_MODE_FLAG_DSI_USE_TE0 | I915_MODE_FLAG_DSI_USE_TE1))
+		return 0;
 
 	/*
 	 * On i965gm the hardware frame counter reads
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index c2e4b227bdf3..634c60befe7e 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -682,8 +682,12 @@ u32 i915_get_vblank_counter(struct drm_crtc *crtc)
 u32 g4x_get_vblank_counter(struct drm_crtc *crtc)
 {
 	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
+	struct drm_vblank_crtc *vblank = &dev_priv->drm.vblank[drm_crtc_index(crtc)];
 	enum pipe pipe = to_intel_crtc(crtc)->pipe;
 
+	if (!vblank->max_vblank_count)
+		return 0;
+
 	return I915_READ(PIPE_FRMCOUNT_G4X(pipe));
 }
 
-- 
2.21.0.5.gaeb582a

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 5/5] drm/i915/dsi: Enable software vblank counter

[Ville Syrjälä]

On Tue, Sep 22, 2020 at 07:14:26PM +0530, Vandita Kulkarni wrote:
> In case of DSI cmd mode, we get hw vblank counter
> updated after the TE comes in, if we try to read
> the hw vblank counter in te handler we wouldnt have
> the udpated vblank counter yet.
> This will lead to a state where we would send the
> vblank event to the user space in the next te,
> though the frame update would have completed in
> the first TE duration itself.
> Hence switch to using software timestamp based
> vblank counter.
> 
> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 11 +++++++++++
>  drivers/gpu/drm/i915/i915_irq.c              |  4 ++++
>  2 files changed, 15 insertions(+)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index c4f331f2af45..8b9e59e52708 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -1808,6 +1808,17 @@ enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
>  static u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
> +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> +	u32 flags = crtc->mode_flags;

That's wrong. You need to look at the crtc_state instead.

> +
> +	/*
> +	 * From Gen 11, In case of dsi cmd mode, frame counter wouldnt
> +	 * have updated at the beginning of TE, if we want to use
> +	 * the hw counter, then we would find it updated in only
> +	 * the next TE, hence switching to sw counter.
> +	 */
> +	if (flags & (I915_MODE_FLAG_DSI_USE_TE0 | I915_MODE_FLAG_DSI_USE_TE1))
> +		return 0;
>  
>  	/*
>  	 * On i965gm the hardware frame counter reads
> diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> index c2e4b227bdf3..634c60befe7e 100644
> --- a/drivers/gpu/drm/i915/i915_irq.c
> +++ b/drivers/gpu/drm/i915/i915_irq.c
> @@ -682,8 +682,12 @@ u32 i915_get_vblank_counter(struct drm_crtc *crtc)
>  u32 g4x_get_vblank_counter(struct drm_crtc *crtc)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> +	struct drm_vblank_crtc *vblank = &dev_priv->drm.vblank[drm_crtc_index(crtc)];
>  	enum pipe pipe = to_intel_crtc(crtc)->pipe;
>  
> +	if (!vblank->max_vblank_count)
> +		return 0;
> +
>  	return I915_READ(PIPE_FRMCOUNT_G4X(pipe));
>  }
>  
> -- 
> 2.21.0.5.gaeb582a

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 5/5] drm/i915/dsi: Enable software vblank counter

[Kulkarni, Vandita]

> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Wednesday, September 23, 2020 3:30 PM
> To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [V13 5/5] drm/i915/dsi: Enable software vblank counter
> 
> On Tue, Sep 22, 2020 at 07:14:26PM +0530, Vandita Kulkarni wrote:
> > In case of DSI cmd mode, we get hw vblank counter updated after the TE
> > comes in, if we try to read the hw vblank counter in te handler we
> > wouldnt have the udpated vblank counter yet.
> > This will lead to a state where we would send the vblank event to the
> > user space in the next te, though the frame update would have
> > completed in the first TE duration itself.
> > Hence switch to using software timestamp based vblank counter.
> >
> > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > ---
> >  drivers/gpu/drm/i915/display/intel_display.c | 11 +++++++++++
> >  drivers/gpu/drm/i915/i915_irq.c              |  4 ++++
> >  2 files changed, 15 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index c4f331f2af45..8b9e59e52708 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -1808,6 +1808,17 @@ enum pipe intel_crtc_pch_transcoder(struct
> > intel_crtc *crtc)  static u32 intel_crtc_max_vblank_count(const struct
> > intel_crtc_state *crtc_state)  {
> >  	struct drm_i915_private *dev_priv =
> > to_i915(crtc_state->uapi.crtc->dev);
> > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > +	u32 flags = crtc->mode_flags;
> 
> That's wrong. You need to look at the crtc_state instead.

Thanks,
I will use crtc_state.

I saw this happening 
crtc->mode_flags = crtc_state->mode_flags;
at intel_crtc_update_active_timings.

Thanks,
-Vandita
> 
> > +
> > +	/*
> > +	 * From Gen 11, In case of dsi cmd mode, frame counter wouldnt
> > +	 * have updated at the beginning of TE, if we want to use
> > +	 * the hw counter, then we would find it updated in only
> > +	 * the next TE, hence switching to sw counter.
> > +	 */
> > +	if (flags & (I915_MODE_FLAG_DSI_USE_TE0 |
> I915_MODE_FLAG_DSI_USE_TE1))
> > +		return 0;
> >
> >  	/*
> >  	 * On i965gm the hardware frame counter reads diff --git
> > a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
> > index c2e4b227bdf3..634c60befe7e 100644
> > --- a/drivers/gpu/drm/i915/i915_irq.c
> > +++ b/drivers/gpu/drm/i915/i915_irq.c
> > @@ -682,8 +682,12 @@ u32 i915_get_vblank_counter(struct drm_crtc
> > *crtc)
> >  u32 g4x_get_vblank_counter(struct drm_crtc *crtc)  {
> >  	struct drm_i915_private *dev_priv = to_i915(crtc->dev);
> > +	struct drm_vblank_crtc *vblank =
> > +&dev_priv->drm.vblank[drm_crtc_index(crtc)];
> >  	enum pipe pipe = to_intel_crtc(crtc)->pipe;
> >
> > +	if (!vblank->max_vblank_count)
> > +		return 0;
> > +
> >  	return I915_READ(PIPE_FRMCOUNT_G4X(pipe));
> >  }
> >
> > --
> > 2.21.0.5.gaeb582a
> 
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 5/5] drm/i915/dsi: Enable software vblank counter

[Ville Syrjälä]

On Wed, Sep 23, 2020 at 10:16:05AM +0000, Kulkarni, Vandita wrote:
> > -----Original Message-----
> > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > Sent: Wednesday, September 23, 2020 3:30 PM
> > To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> > Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> > Subject: Re: [V13 5/5] drm/i915/dsi: Enable software vblank counter
> > 
> > On Tue, Sep 22, 2020 at 07:14:26PM +0530, Vandita Kulkarni wrote:
> > > In case of DSI cmd mode, we get hw vblank counter updated after the TE
> > > comes in, if we try to read the hw vblank counter in te handler we
> > > wouldnt have the udpated vblank counter yet.
> > > This will lead to a state where we would send the vblank event to the
> > > user space in the next te, though the frame update would have
> > > completed in the first TE duration itself.
> > > Hence switch to using software timestamp based vblank counter.
> > >
> > > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > > ---
> > >  drivers/gpu/drm/i915/display/intel_display.c | 11 +++++++++++
> > >  drivers/gpu/drm/i915/i915_irq.c              |  4 ++++
> > >  2 files changed, 15 insertions(+)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > index c4f331f2af45..8b9e59e52708 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > @@ -1808,6 +1808,17 @@ enum pipe intel_crtc_pch_transcoder(struct
> > > intel_crtc *crtc)  static u32 intel_crtc_max_vblank_count(const struct
> > > intel_crtc_state *crtc_state)  {
> > >  	struct drm_i915_private *dev_priv =
> > > to_i915(crtc_state->uapi.crtc->dev);
> > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > +	u32 flags = crtc->mode_flags;
> > 
> > That's wrong. You need to look at the crtc_state instead.
> 
> Thanks,
> I will use crtc_state.

I'd also frop the 'flags' variable. Single use so not much point.
Or at the very least call it 'mode_flags' so we know what it
actually is.

-- 
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 5/5] drm/i915/dsi: Enable software vblank counter

[Kulkarni, Vandita]

> -----Original Message-----
> From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Sent: Wednesday, September 23, 2020 4:05 PM
> To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani <jani.nikula@intel.com>
> Subject: Re: [V13 5/5] drm/i915/dsi: Enable software vblank counter
> 
> On Wed, Sep 23, 2020 at 10:16:05AM +0000, Kulkarni, Vandita wrote:
> > > -----Original Message-----
> > > From: Ville Syrjälä <ville.syrjala@linux.intel.com>
> > > Sent: Wednesday, September 23, 2020 3:30 PM
> > > To: Kulkarni, Vandita <vandita.kulkarni@intel.com>
> > > Cc: intel-gfx@lists.freedesktop.org; Nikula, Jani
> > > <jani.nikula@intel.com>
> > > Subject: Re: [V13 5/5] drm/i915/dsi: Enable software vblank counter
> > >
> > > On Tue, Sep 22, 2020 at 07:14:26PM +0530, Vandita Kulkarni wrote:
> > > > In case of DSI cmd mode, we get hw vblank counter updated after
> > > > the TE comes in, if we try to read the hw vblank counter in te
> > > > handler we wouldnt have the udpated vblank counter yet.
> > > > This will lead to a state where we would send the vblank event to
> > > > the user space in the next te, though the frame update would have
> > > > completed in the first TE duration itself.
> > > > Hence switch to using software timestamp based vblank counter.
> > > >
> > > > Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
> > > > ---
> > > >  drivers/gpu/drm/i915/display/intel_display.c | 11 +++++++++++
> > > >  drivers/gpu/drm/i915/i915_irq.c              |  4 ++++
> > > >  2 files changed, 15 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > > > b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index c4f331f2af45..8b9e59e52708 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -1808,6 +1808,17 @@ enum pipe intel_crtc_pch_transcoder(struct
> > > > intel_crtc *crtc)  static u32 intel_crtc_max_vblank_count(const
> > > > struct intel_crtc_state *crtc_state)  {
> > > >  	struct drm_i915_private *dev_priv =
> > > > to_i915(crtc_state->uapi.crtc->dev);
> > > > +	struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > > +	u32 flags = crtc->mode_flags;
> > >
> > > That's wrong. You need to look at the crtc_state instead.
> >
> > Thanks,
> > I will use crtc_state.
> 
> I'd also frop the 'flags' variable. Single use so not much point.
> Or at the very least call it 'mode_flags' so we know what it actually is.
Ok, will use mode_flags.

Thanks,
Vandita
> 
> --
> Ville Syrjälä
> Intel
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.BAT: success for Add support for mipi dsi cmd mode (rev13)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 4385 bytes --]

== Series Details ==

Series: Add support for mipi dsi cmd mode (rev13)
URL   : https://patchwork.freedesktop.org/series/69290/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9034 -> Patchwork_18545
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/index.html

Known issues
------------

  Here are the changes found in Patchwork_18545 that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@i915_pm_rpm@basic-pci-d3-state:
    - fi-bsw-kefka:       [PASS][1] -> [DMESG-WARN][2] ([i915#1982])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-bsw-kefka/igt@i915_pm_rpm@basic-pci-d3-state.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-bsw-kefka/igt@i915_pm_rpm@basic-pci-d3-state.html

  * igt@i915_pm_rpm@module-reload:
    - fi-byt-j1900:       [PASS][3] -> [DMESG-WARN][4] ([i915#1982])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-byt-j1900/igt@i915_pm_rpm@module-reload.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-byt-j1900/igt@i915_pm_rpm@module-reload.html

  * igt@kms_chamelium@common-hpd-after-suspend:
    - fi-kbl-7500u:       [PASS][5] -> [DMESG-WARN][6] ([i915#2203])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-kbl-7500u/igt@kms_chamelium@common-hpd-after-suspend.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-kbl-7500u/igt@kms_chamelium@common-hpd-after-suspend.html

  
#### Possible fixes ####

  * igt@vgem_basic@unload:
    - fi-kbl-x1275:       [DMESG-WARN][7] ([i915#62] / [i915#92]) -> [PASS][8]
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-kbl-x1275/igt@vgem_basic@unload.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-kbl-x1275/igt@vgem_basic@unload.html

  
#### Warnings ####

  * igt@kms_cursor_legacy@basic-flip-after-cursor-legacy:
    - fi-kbl-x1275:       [DMESG-WARN][9] ([i915#62] / [i915#92]) -> [DMESG-WARN][10] ([i915#62] / [i915#92] / [i915#95]) +2 similar issues
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-kbl-x1275/igt@kms_cursor_legacy@basic-flip-after-cursor-legacy.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-kbl-x1275/igt@kms_cursor_legacy@basic-flip-after-cursor-legacy.html

  * igt@kms_force_connector_basic@prune-stale-modes:
    - fi-kbl-x1275:       [DMESG-WARN][11] ([i915#62] / [i915#92] / [i915#95]) -> [DMESG-WARN][12] ([i915#62] / [i915#92]) +4 similar issues
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/fi-kbl-x1275/igt@kms_force_connector_basic@prune-stale-modes.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/fi-kbl-x1275/igt@kms_force_connector_basic@prune-stale-modes.html

  
  {name}: This element is suppressed. This means it is ignored when computing
          the status of the difference (SUCCESS, WARNING, or FAILURE).

  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2203]: https://gitlab.freedesktop.org/drm/intel/issues/2203
  [i915#62]: https://gitlab.freedesktop.org/drm/intel/issues/62
  [i915#92]: https://gitlab.freedesktop.org/drm/intel/issues/92
  [i915#95]: https://gitlab.freedesktop.org/drm/intel/issues/95


Participating hosts (41 -> 37)
------------------------------

  Additional (1): fi-cml-u2 
  Missing    (5): fi-ilk-m540 fi-byt-squawks fi-bsw-cyan fi-byt-clapper fi-bdw-samus 


Build changes
-------------

  * Linux: CI_DRM_9034 -> Patchwork_18545

  CI-20190529: 20190529
  CI_DRM_9034: 6348adbb00184ce4f166e3260583f09aa381c7e3 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18545: 8f61cd262902944cc8a261360bb1fdc2d84a5d57 @ git://anongit.freedesktop.org/gfx-ci/linux


== Linux commits ==

8f61cd262902 drm/i915/dsi: Enable software vblank counter
b1c8ba29cb59 drm/i915/dsi: Initiate fame request in cmd mode
3ea842d0592b drm/i915/dsi: Add TE handler for dsi cmd mode.
24b589446a6b i915/dsi: Configure TE interrupt for cmd mode
21f8331c75f9 drm/i915/dsi: Add details about TE in get_config

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/index.html

[-- Attachment #1.2: Type: text/html, Size: 5809 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

[Intel-gfx] ✓ Fi.CI.IGT: success for Add support for mipi dsi cmd mode (rev13)

[Patchwork]

[-- Attachment #1.1: Type: text/plain, Size: 12314 bytes --]

== Series Details ==

Series: Add support for mipi dsi cmd mode (rev13)
URL   : https://patchwork.freedesktop.org/series/69290/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_9034_full -> Patchwork_18545_full
====================================================

Summary
-------

  **SUCCESS**

  No regressions found.

  

Known issues
------------

  Here are the changes found in Patchwork_18545_full that come from known issues:

### IGT changes ###

#### Issues hit ####

  * igt@gem_exec_reloc@basic-many-active@vcs0:
    - shard-glk:          [PASS][1] -> [FAIL][2] ([i915#2389])
   [1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-glk1/igt@gem_exec_reloc@basic-many-active@vcs0.html
   [2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-glk5/igt@gem_exec_reloc@basic-many-active@vcs0.html

  * igt@gem_userptr_blits@unsync-unmap-cycles:
    - shard-skl:          [PASS][3] -> [TIMEOUT][4] ([i915#1958])
   [3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl1/igt@gem_userptr_blits@unsync-unmap-cycles.html
   [4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl5/igt@gem_userptr_blits@unsync-unmap-cycles.html

  * igt@gen9_exec_parse@allowed-all:
    - shard-kbl:          [PASS][5] -> [DMESG-WARN][6] ([i915#1436] / [i915#716])
   [5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-kbl6/igt@gen9_exec_parse@allowed-all.html
   [6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-kbl2/igt@gen9_exec_parse@allowed-all.html

  * igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic:
    - shard-skl:          [PASS][7] -> [DMESG-WARN][8] ([i915#1982]) +7 similar issues
   [7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl10/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html
   [8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl7/igt@kms_cursor_legacy@basic-busy-flip-before-cursor-atomic.html

  * igt@kms_flip@flip-vs-expired-vblank@a-edp1:
    - shard-skl:          [PASS][9] -> [FAIL][10] ([i915#79])
   [9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl1/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html
   [10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl9/igt@kms_flip@flip-vs-expired-vblank@a-edp1.html

  * igt@kms_flip@flip-vs-suspend@b-vga1:
    - shard-snb:          [PASS][11] -> [INCOMPLETE][12] ([i915#82])
   [11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-snb2/igt@kms_flip@flip-vs-suspend@b-vga1.html
   [12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-snb1/igt@kms_flip@flip-vs-suspend@b-vga1.html

  * igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc:
    - shard-skl:          [PASS][13] -> [FAIL][14] ([i915#49])
   [13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl9/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html
   [14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl7/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-indfb-draw-mmap-wc.html

  * igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-render:
    - shard-tglb:         [PASS][15] -> [DMESG-WARN][16] ([i915#1982]) +1 similar issue
   [15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-tglb2/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-render.html
   [16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-tglb2/igt@kms_frontbuffer_tracking@psr-1p-primscrn-pri-shrfb-draw-render.html

  * igt@kms_hdr@bpc-switch-suspend:
    - shard-kbl:          [PASS][17] -> [DMESG-WARN][18] ([i915#180]) +2 similar issues
   [17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-kbl2/igt@kms_hdr@bpc-switch-suspend.html
   [18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-kbl4/igt@kms_hdr@bpc-switch-suspend.html

  * igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min:
    - shard-skl:          [PASS][19] -> [FAIL][20] ([fdo#108145] / [i915#265]) +1 similar issue
   [19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl9/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html
   [20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl2/igt@kms_plane_alpha_blend@pipe-c-constant-alpha-min.html

  * igt@kms_plane_alpha_blend@pipe-c-coverage-7efc:
    - shard-skl:          [PASS][21] -> [DMESG-FAIL][22] ([fdo#108145] / [i915#1982])
   [21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl8/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html
   [22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl10/igt@kms_plane_alpha_blend@pipe-c-coverage-7efc.html

  * igt@kms_psr@psr2_sprite_mmap_gtt:
    - shard-iclb:         [PASS][23] -> [SKIP][24] ([fdo#109441]) +2 similar issues
   [23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-iclb2/igt@kms_psr@psr2_sprite_mmap_gtt.html
   [24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-iclb1/igt@kms_psr@psr2_sprite_mmap_gtt.html

  
#### Possible fixes ####

  * igt@gem_exec_fence@syncobj-timeline-wait:
    - shard-skl:          [DMESG-WARN][25] ([i915#1982]) -> [PASS][26] +3 similar issues
   [25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl5/igt@gem_exec_fence@syncobj-timeline-wait.html
   [26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl10/igt@gem_exec_fence@syncobj-timeline-wait.html

  * igt@gem_huc_copy@huc-copy:
    - shard-tglb:         [SKIP][27] ([i915#2190]) -> [PASS][28]
   [27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-tglb6/igt@gem_huc_copy@huc-copy.html
   [28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-tglb3/igt@gem_huc_copy@huc-copy.html

  * igt@i915_suspend@debugfs-reader:
    - shard-snb:          [DMESG-WARN][29] ([i915#42]) -> [PASS][30]
   [29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-snb1/igt@i915_suspend@debugfs-reader.html
   [30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-snb4/igt@i915_suspend@debugfs-reader.html

  * igt@kms_flip@flip-vs-blocking-wf-vblank@a-edp1:
    - shard-skl:          [FAIL][31] ([i915#2122]) -> [PASS][32]
   [31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl7/igt@kms_flip@flip-vs-blocking-wf-vblank@a-edp1.html
   [32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl4/igt@kms_flip@flip-vs-blocking-wf-vblank@a-edp1.html

  * igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-move:
    - shard-tglb:         [DMESG-WARN][33] ([i915#1982]) -> [PASS][34]
   [33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-tglb2/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-move.html
   [34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-tglb8/igt@kms_frontbuffer_tracking@psr-1p-primscrn-cur-indfb-move.html

  * igt@kms_hdr@bpc-switch-dpms:
    - shard-skl:          [FAIL][35] ([i915#1188]) -> [PASS][36] +2 similar issues
   [35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl4/igt@kms_hdr@bpc-switch-dpms.html
   [36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl1/igt@kms_hdr@bpc-switch-dpms.html

  * igt@kms_plane_scaling@pipe-c-scaler-with-clipping-clamping:
    - shard-iclb:         [DMESG-WARN][37] ([i915#1982]) -> [PASS][38]
   [37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-iclb3/igt@kms_plane_scaling@pipe-c-scaler-with-clipping-clamping.html
   [38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-iclb3/igt@kms_plane_scaling@pipe-c-scaler-with-clipping-clamping.html

  * igt@kms_psr2_su@page_flip:
    - shard-iclb:         [SKIP][39] ([fdo#109642] / [fdo#111068]) -> [PASS][40]
   [39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-iclb5/igt@kms_psr2_su@page_flip.html
   [40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-iclb2/igt@kms_psr2_su@page_flip.html

  * igt@kms_psr@psr2_sprite_plane_move:
    - shard-iclb:         [SKIP][41] ([fdo#109441]) -> [PASS][42] +3 similar issues
   [41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-iclb5/igt@kms_psr@psr2_sprite_plane_move.html
   [42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-iclb2/igt@kms_psr@psr2_sprite_plane_move.html

  * igt@kms_vblank@pipe-a-ts-continuation-suspend:
    - shard-kbl:          [DMESG-WARN][43] ([i915#180]) -> [PASS][44] +4 similar issues
   [43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-kbl4/igt@kms_vblank@pipe-a-ts-continuation-suspend.html
   [44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-kbl6/igt@kms_vblank@pipe-a-ts-continuation-suspend.html

  
#### Warnings ####

  * igt@kms_content_protection@atomic-dpms:
    - shard-apl:          [TIMEOUT][45] ([i915#1319] / [i915#1635] / [i915#1958]) -> [FAIL][46] ([fdo#110321] / [fdo#110336] / [i915#1635])
   [45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-apl7/igt@kms_content_protection@atomic-dpms.html
   [46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-apl3/igt@kms_content_protection@atomic-dpms.html

  * igt@kms_dp_dsc@basic-dsc-enable-edp:
    - shard-iclb:         [SKIP][47] ([fdo#109349]) -> [DMESG-WARN][48] ([i915#1226])
   [47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-iclb8/igt@kms_dp_dsc@basic-dsc-enable-edp.html
   [48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-iclb2/igt@kms_dp_dsc@basic-dsc-enable-edp.html

  * igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1:
    - shard-skl:          [DMESG-WARN][49] ([i915#1982]) -> [DMESG-FAIL][50] ([i915#1982] / [i915#79])
   [49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_9034/shard-skl6/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html
   [50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/shard-skl5/igt@kms_flip@flip-vs-expired-vblank-interruptible@a-edp1.html

  
  [fdo#108145]: https://bugs.freedesktop.org/show_bug.cgi?id=108145
  [fdo#109349]: https://bugs.freedesktop.org/show_bug.cgi?id=109349
  [fdo#109441]: https://bugs.freedesktop.org/show_bug.cgi?id=109441
  [fdo#109642]: https://bugs.freedesktop.org/show_bug.cgi?id=109642
  [fdo#110321]: https://bugs.freedesktop.org/show_bug.cgi?id=110321
  [fdo#110336]: https://bugs.freedesktop.org/show_bug.cgi?id=110336
  [fdo#111068]: https://bugs.freedesktop.org/show_bug.cgi?id=111068
  [i915#1188]: https://gitlab.freedesktop.org/drm/intel/issues/1188
  [i915#1226]: https://gitlab.freedesktop.org/drm/intel/issues/1226
  [i915#1319]: https://gitlab.freedesktop.org/drm/intel/issues/1319
  [i915#1436]: https://gitlab.freedesktop.org/drm/intel/issues/1436
  [i915#1635]: https://gitlab.freedesktop.org/drm/intel/issues/1635
  [i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
  [i915#1958]: https://gitlab.freedesktop.org/drm/intel/issues/1958
  [i915#1982]: https://gitlab.freedesktop.org/drm/intel/issues/1982
  [i915#2122]: https://gitlab.freedesktop.org/drm/intel/issues/2122
  [i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
  [i915#2389]: https://gitlab.freedesktop.org/drm/intel/issues/2389
  [i915#265]: https://gitlab.freedesktop.org/drm/intel/issues/265
  [i915#42]: https://gitlab.freedesktop.org/drm/intel/issues/42
  [i915#49]: https://gitlab.freedesktop.org/drm/intel/issues/49
  [i915#716]: https://gitlab.freedesktop.org/drm/intel/issues/716
  [i915#79]: https://gitlab.freedesktop.org/drm/intel/issues/79
  [i915#82]: https://gitlab.freedesktop.org/drm/intel/issues/82


Participating hosts (11 -> 11)
------------------------------

  No changes in participating hosts


Build changes
-------------

  * Linux: CI_DRM_9034 -> Patchwork_18545

  CI-20190529: 20190529
  CI_DRM_9034: 6348adbb00184ce4f166e3260583f09aa381c7e3 @ git://anongit.freedesktop.org/gfx-ci/linux
  IGT_5787: 0ec962017c8131de14e0cb038f7f76b1f17ed637 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
  Patchwork_18545: 8f61cd262902944cc8a261360bb1fdc2d84a5d57 @ git://anongit.freedesktop.org/gfx-ci/linux
  piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_18545/index.html

[-- Attachment #1.2: Type: text/html, Size: 14375 bytes --]

[-- Attachment #2: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

Re: [Intel-gfx] [V13 0/5] Add support for mipi dsi cmd mode

[Jani Nikula]

On Tue, 22 Sep 2020, Vandita Kulkarni <vandita.kulkarni@intel.com> wrote:
> This series contain interrupt handling part of cmd mode.
> Configuration patches were merged already.
>
> v10: Address the review comments on patch 3 and 4
> v11: fix compilation issue introduced in v10
> v12: fix check patch errors on patch 3
> v13: Use sw vblank counter (Ville)

Ville, I'd merge this unless you have further comments.

BR,
Jani.


>
> Vandita Kulkarni (5):
>   drm/i915/dsi: Add details about TE in get_config
>   i915/dsi: Configure TE interrupt for cmd mode
>   drm/i915/dsi: Add TE handler for dsi cmd mode.
>   drm/i915/dsi: Initiate fame request in cmd mode
>   drm/i915/dsi: Enable software vblank counter
>
>  drivers/gpu/drm/i915/display/icl_dsi.c       |  56 +++++++--
>  drivers/gpu/drm/i915/display/intel_display.c |  21 ++++
>  drivers/gpu/drm/i915/display/intel_dsi.h     |   1 +
>  drivers/gpu/drm/i915/i915_irq.c              | 119 ++++++++++++++++++-
>  4 files changed, 183 insertions(+), 14 deletions(-)

-- 
Jani Nikula, Intel Open Source Graphics Center
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx