intel-gfx.lists.freedesktop.org archive mirror
 help / color / mirror / Atom feed
From: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
To: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Subject: Re: [Intel-gfx] [PATCH 08/13] drm/i915/dp: Consider output_format while computing dsc bpp
Date: Mon, 24 Apr 2023 15:51:38 +0300	[thread overview]
Message-ID: <ZEZ7Wqy+E9p1xsB6@intel.com> (raw)
In-Reply-To: <20230331101613.936776-9-ankit.k.nautiyal@intel.com>

On Fri, Mar 31, 2023 at 03:46:08PM +0530, Ankit Nautiyal wrote:
> While using DSC the compressed bpp is computed assuming RGB output
> format. Consider the output_format and compute the compressed bpp
> during mode valid and compute config steps.
> 
> For DP-MST we currently use RGB output format only, so continue
> using RGB while computing compressed bpp for MST case.
> 
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp.c     | 14 +++++++++++++-
>  drivers/gpu/drm/i915/display/intel_dp.h     |  1 +
>  drivers/gpu/drm/i915/display/intel_dp_mst.c |  1 +
>  3 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 4d5c74a1bd29..e5903b5e511b 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -712,6 +712,7 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  				u32 link_clock, u32 lane_count,
>  				u32 mode_clock, u32 mode_hdisplay,
>  				bool bigjoiner,
> +				enum intel_output_format output_format,
>  				u32 pipe_bpp,
>  				u32 timeslots)
>  {
> @@ -736,6 +737,10 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  	bits_per_pixel = ((link_clock * lane_count) * timeslots) /
>  			 (intel_dp_mode_to_fec_clock(mode_clock) * 8);
>  
> +	/* Bandwidth required for 420 is half, that of 444 format */
> +	if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> +		bits_per_pixel *= 2;

/2 ?

> +
>  	drm_dbg_kms(&i915->drm, "Max link bpp is %u for %u timeslots "
>  				"total bw %u pixel clock %u\n",
>  				bits_per_pixel, timeslots,
> @@ -1133,11 +1138,16 @@ intel_dp_mode_valid(struct drm_connector *_connector,
>  
>  	if (HAS_DSC(dev_priv) &&
>  	    drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)) {
> +		enum intel_output_format sink_format, output_format;
> +		int pipe_bpp;
> +
> +		sink_format = intel_dp_sink_format(connector, mode);
> +		output_format = intel_dp_output_format(connector, sink_format);
>  		/*
>  		 * TBD pass the connector BPC,
>  		 * for now U8_MAX so that max BPC on that platform would be picked
>  		 */
> -		int pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
> +		pipe_bpp = intel_dp_dsc_compute_bpp(intel_dp, U8_MAX);
>  
>  		/*
>  		 * Output bpp is stored in 6.4 format so right shift by 4 to get the
> @@ -1157,6 +1167,7 @@ intel_dp_mode_valid(struct drm_connector *_connector,
>  							    target_clock,
>  							    mode->hdisplay,
>  							    bigjoiner,
> +							    output_format,
>  							    pipe_bpp, 64) >> 4;
>  			dsc_slice_count =
>  				intel_dp_dsc_get_slice_count(intel_dp,
> @@ -1655,6 +1666,7 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
>  							    adjusted_mode->crtc_clock,
>  							    adjusted_mode->crtc_hdisplay,
>  							    pipe_config->bigjoiner_pipes,
> +							    pipe_config->output_format,
>  							    pipe_bpp,
>  							    timeslots);
>  			if (!dsc_max_output_bpp) {
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index ef39e4f7a329..db86c2b71c1f 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -107,6 +107,7 @@ u16 intel_dp_dsc_get_output_bpp(struct drm_i915_private *i915,
>  				u32 link_clock, u32 lane_count,
>  				u32 mode_clock, u32 mode_hdisplay,
>  				bool bigjoiner,
> +				enum intel_output_format output_format,
>  				u32 pipe_bpp,
>  				u32 timeslots);
>  u8 intel_dp_dsc_get_slice_count(struct intel_dp *intel_dp,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 2cc4239cfa5b..daa1591a9ae8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -927,6 +927,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  							    target_clock,
>  							    mode->hdisplay,
>  							    bigjoiner,
> +							    INTEL_OUTPUT_FORMAT_RGB,
>  							    pipe_bpp, 64) >> 4;
>  			dsc_slice_count =
>  				intel_dp_dsc_get_slice_count(intel_dp,
> -- 
> 2.25.1

-- 
Ville Syrjälä
Intel

  reply	other threads:[~2023-04-24 12:51 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-31 10:16 [Intel-gfx] [PATCH 00/13] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 01/13] drm/i915/display: Add new member to configure PCON color conversion Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 02/13] drm/i915/display: Add new member in intel_dp to store ycbcr420 passthrough cap Ankit Nautiyal
2023-04-24 12:46   ` Ville Syrjälä
2023-04-26  4:53     ` Nautiyal, Ankit K
2023-03-31 10:16 ` [Intel-gfx] [PATCH 03/13] drm/i915/dp: Replace intel_dp.dfp members with the new crtc_state sink_format Ankit Nautiyal
2023-04-24 12:31   ` Ville Syrjälä
2023-04-26  4:58     ` Nautiyal, Ankit K
2023-03-31 10:16 ` [Intel-gfx] [PATCH 04/13] drm/i915/dp: Configure PCON for conversion of output_format to YCbCr444 Ankit Nautiyal
2023-04-24 12:32   ` Ville Syrjälä
2023-03-31 10:16 ` [Intel-gfx] [PATCH 05/13] drm/i915/display: Use sink_format instead of ycbcr420_output flag Ankit Nautiyal
2023-04-24 12:37   ` Ville Syrjälä
2023-04-26  5:09     ` Nautiyal, Ankit K
2023-03-31 10:16 ` [Intel-gfx] [PATCH 06/13] drm/i915/dp: Add helper to get sink_format Ankit Nautiyal
2023-04-24 12:38   ` Ville Syrjälä
2023-03-31 10:16 ` [Intel-gfx] [PATCH 07/13] drm/i915/dp: Rearrange check for illegal mode and comments in mode_valid Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 08/13] drm/i915/dp: Consider output_format while computing dsc bpp Ankit Nautiyal
2023-04-24 12:51   ` Ville Syrjälä [this message]
2023-04-26  5:31     ` Nautiyal, Ankit K
2023-03-31 10:16 ` [Intel-gfx] [PATCH 09/13] drm/i915/dp_mst: Use output_format to get the final link bpp Ankit Nautiyal
2023-04-24 12:58   ` Ville Syrjälä
2023-03-31 10:16 ` [Intel-gfx] [PATCH 10/13] drm/i915/dp: Handle BPP where HDMI2.1 DFP doesn't support DSC Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 11/13] drm/i915/dp: Fix FRL BW check for HDMI2.1 DFP Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 12/13] drm/i915/dp: Add a wrapper to check frl/tmds downstream constraints Ankit Nautiyal
2023-03-31 10:16 ` [Intel-gfx] [PATCH 13/13] drm/i915/dp: Use consistent name for link bpp and compressed bpp Ankit Nautiyal
2023-04-24 13:04   ` Ville Syrjälä
2023-04-26  6:10     ` Nautiyal, Ankit K
2023-03-31 16:20 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes (rev13) Patchwork
2023-03-31 16:20 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2023-03-31 16:32 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2023-04-01 16:09 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork
2023-04-24 13:09 ` [Intel-gfx] [PATCH 00/13] Handle BPC for HDMI2.1 PCON without DSC1.2 sink and other fixes Ville Syrjälä
2023-04-25  7:30   ` Nautiyal, Ankit K

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZEZ7Wqy+E9p1xsB6@intel.com \
    --to=ville.syrjala@linux.intel.com \
    --cc=ankit.k.nautiyal@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).