[PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[James Prestwood]

---
 doc/access-point-api.txt | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/doc/access-point-api.txt b/doc/access-point-api.txt
index 63e61d49..28e6437d 100644
--- a/doc/access-point-api.txt
+++ b/doc/access-point-api.txt
@@ -71,3 +71,16 @@ Properties	boolean Started [readonly]
 		uint32 Frequency [readonly, optional]
 
 			The frequency that the Access Point is operating on.
+
+		string PairwiseCiphers [readonly, optional]
+
+			Comma separated list of pairwise ciphers the access
+			point supports. The same format as setting a list of
+			ciphers for an AP  profile, i.e. TKIP, CCMP-128,
+			GCMP-128, CCMP-256, GCMP-256 etc.
+
+		string GroupCipher [readonly, optional]
+
+			The group cipher suite the access point is using.
+			Possible values are the same as what could be included
+			in the PairwiseCiphers list.
-- 
2.34.3

[PATCH 2/4] ap: update Scanning property when AP starts

[James Prestwood]

This wasn't being updated meaning the property is missing until a
scan is issued over DBus.

Rather than duplicate all the property changed calls they were all
factored out into a helper function.
---
 src/ap.c | 55 +++++++++++++++++++++++++------------------------------
 1 file changed, 25 insertions(+), 30 deletions(-)

v2:
 * Fixed build problem that didn't make it into v1

diff --git a/src/ap.c b/src/ap.c
index 9c82a545..665c1857 100644
--- a/src/ap.c
+++ b/src/ap.c
@@ -3672,6 +3672,28 @@ struct ap_if_data {
 	struct l_dbus_message *pending;
 };
 
+static void ap_properties_changed(struct ap_if_data *ap_if)
+{
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "Started");
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "Name");
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "Frequency");
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "PairwiseCiphers");
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "GroupCipher");
+	l_dbus_property_changed(dbus_get_bus(),
+				netdev_get_path(ap_if->netdev),
+				IWD_AP_INTERFACE, "Scanning");
+}
+
 static void ap_if_event_func(enum ap_event_type type, const void *event_data,
 				void *user_data)
 {
@@ -3703,21 +3725,8 @@ static void ap_if_event_func(enum ap_event_type type, const void *event_data,
 
 		reply = l_dbus_message_new_method_return(ap_if->pending);
 		dbus_pending_reply(&ap_if->pending, reply);
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Started");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Name");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Frequency");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "PairwiseCiphers");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "GroupCipher");
+
+		ap_properties_changed(ap_if);
 
 		l_rtnl_set_linkmode_and_operstate(rtnl,
 					netdev_get_ifindex(ap_if->netdev),
@@ -3730,21 +3739,7 @@ static void ap_if_event_func(enum ap_event_type type, const void *event_data,
 						netdev_get_path(ap_if->netdev),
 						IWD_AP_DIAGNOSTIC_INTERFACE);
 
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Started");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Name");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "Frequency");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "PairwiseCiphers");
-		l_dbus_property_changed(dbus_get_bus(),
-					netdev_get_path(ap_if->netdev),
-					IWD_AP_INTERFACE, "GroupCipher");
+		ap_properties_changed(ap_if);
 
 		l_rtnl_set_linkmode_and_operstate(rtnl,
 					netdev_get_ifindex(ap_if->netdev),
-- 
2.34.3

[PATCH 3/4] auto-t: iwd.py: allow certain APIs to be used in AP mode

[James Prestwood]

AP mode implements a few DBus methods/properties which are named
the same as station: Scan, Scanning, and GetOrderedNetworks. Allow
the Device object to work with these in AP mode by calling the
correct method if the Mode is 'ap'.
---
 autotests/util/iwd.py | 24 ++++++++++++++++--------
 1 file changed, 16 insertions(+), 8 deletions(-)

diff --git a/autotests/util/iwd.py b/autotests/util/iwd.py
index 98b9ea1c..5fa12444 100755
--- a/autotests/util/iwd.py
+++ b/autotests/util/iwd.py
@@ -521,13 +521,16 @@ class Device(IWDDBusAbstract):
     def scanning(self):
         '''
         Reflects whether the device is currently scanning
-        for networks.  net.connman.iwd.Network objects are
-        updated when this property goes from true to false.
+        for networks.  For station devices net.connman.iwd.Network
+        objects are updated when this property goes from true to false
 
         @rtype: boolean
         '''
-        props = self._station_properties()
-        return bool(props['Scanning'])
+        if self._properties['Mode'] == 'station':
+            props = self._station_properties()
+            return bool(props['Scanning'])
+        else:
+            return bool(self._ap.scanning)
 
     @property
     def autoconnect(self):
@@ -544,12 +547,14 @@ class Device(IWDDBusAbstract):
            Possible exception: BusyEx
                                FailedEx
         '''
-        self._iface.Scan(dbus_interface=IWD_STATION_INTERFACE,
+        if self._properties['Mode'] == 'station':
+            self._iface.Scan(dbus_interface=IWD_STATION_INTERFACE,
                                reply_handler=self._success,
                                error_handler=self._failure)
-
-        if wait:
-            self._wait_for_async_op()
+            if wait:
+                self._wait_for_async_op()
+        else:
+            self._ap.scan()
 
     def disconnect(self):
         '''Disconnect from the network
@@ -576,6 +581,9 @@ class Device(IWDDBusAbstract):
            groups the maximum relative signal-strength is the
            main sorting factor.
         '''
+        if self._properties['Mode'] == 'ap':
+            return self._ap.get_ordered_networks()
+
         ordered_networks = []
         if not full_scan:
             for bus_obj in self._station.GetOrderedNetworks():
-- 
2.34.3

[PATCH 4/4] auto-t: add test for scanning in AP mode

[James Prestwood]

---
 autotests/testAP/scan_test.py | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
 create mode 100644 autotests/testAP/scan_test.py

diff --git a/autotests/testAP/scan_test.py b/autotests/testAP/scan_test.py
new file mode 100644
index 00000000..0935912c
--- /dev/null
+++ b/autotests/testAP/scan_test.py
@@ -0,0 +1,20 @@
+#! /usr/bin/python3
+
+import unittest
+
+from iwd import IWD
+
+class Test(unittest.TestCase):
+    def test_ap_scan(self):
+        wd = IWD(True)
+
+        dev = wd.list_devices(1)[0]
+
+        dev.start_ap('TestAP2', 'Password2')
+
+        dev.scan()
+
+        networks = dev.get_ordered_networks()
+
+        self.assertTrue(len(networks) == 1)
+        self.assertTrue(networks[0]['Name'] == 'TestAP1')
-- 
2.34.3

Re: [PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[Marcel Holtmann]

Hi James,

> ---
> doc/access-point-api.txt | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
> 
> diff --git a/doc/access-point-api.txt b/doc/access-point-api.txt
> index 63e61d49..28e6437d 100644
> --- a/doc/access-point-api.txt
> +++ b/doc/access-point-api.txt
> @@ -71,3 +71,16 @@ Properties	boolean Started [readonly]
> 		uint32 Frequency [readonly, optional]
> 
> 			The frequency that the Access Point is operating on.
> +
> +		string PairwiseCiphers [readonly, optional]
> +
> +			Comma separated list of pairwise ciphers the access
> +			point supports. The same format as setting a list of
> +			ciphers for an AP  profile, i.e. TKIP, CCMP-128,
> +			GCMP-128, CCMP-256, GCMP-256 etc.

why not array{string} since that makes it a cleaner from an API point of view.

Regards

Marcel

Re: [PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[James Prestwood]

On Thu, 2022-11-03 at 19:17 +0100, Marcel Holtmann wrote:
> Hi James,
> 
> > ---
> > doc/access-point-api.txt | 13 +++++++++++++
> > 1 file changed, 13 insertions(+)
> > 
> > diff --git a/doc/access-point-api.txt b/doc/access-point-api.txt
> > index 63e61d49..28e6437d 100644
> > --- a/doc/access-point-api.txt
> > +++ b/doc/access-point-api.txt
> > @@ -71,3 +71,16 @@ Properties   boolean Started [readonly]
> >                 uint32 Frequency [readonly, optional]
> > 
> >                         The frequency that the Access Point is
> > operating on.
> > +
> > +               string PairwiseCiphers [readonly, optional]
> > +
> > +                       Comma separated list of pairwise ciphers
> > the access
> > +                       point supports. The same format as setting
> > a list of
> > +                       ciphers for an AP  profile, i.e. TKIP,
> > CCMP-128,
> > +                       GCMP-128, CCMP-256, GCMP-256 etc.
> 
> why not array{string} since that makes it a cleaner from an API point
> of view.

We could do this yes. The implemenation has already been merged but we
could change this to an array easy enough.

> 
> Regards
> 
> Marcel
> 

Re: [PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[Denis Kenzior]

Hi James,

>> why not array{string} since that makes it a cleaner from an API point
>> of view.

Yeah, I concur this would be better.

> 
> We could do this yes. The implemenation has already been merged but we
> could change this to an array easy enough.
> 

Yep, lets do that.

Regards,
-Denis

[PATCH 1/4] doc: document AP properties PairwiseCiphers/GroupCipher

[James Prestwood]

---
 doc/access-point-api.txt | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/doc/access-point-api.txt b/doc/access-point-api.txt
index 63e61d49..28e6437d 100644
--- a/doc/access-point-api.txt
+++ b/doc/access-point-api.txt
@@ -71,3 +71,16 @@ Properties	boolean Started [readonly]
 		uint32 Frequency [readonly, optional]
 
 			The frequency that the Access Point is operating on.
+
+		string PairwiseCiphers [readonly, optional]
+
+			Comma separated list of pairwise ciphers the access
+			point supports. The same format as setting a list of
+			ciphers for an AP  profile, i.e. TKIP, CCMP-128,
+			GCMP-128, CCMP-256, GCMP-256 etc.
+
+		string GroupCipher [readonly, optional]
+
+			The group cipher suite the access point is using.
+			Possible values are the same as what could be included
+			in the PairwiseCiphers list.
-- 
2.34.3